Cited by 19Bone Tissue Engineering MaterialsCalcium Carbonate Crystallization and Inhibition3D Printing in Biomedical Research

Polydopamine regulated hydroxyapatite microspheres grown in the three-dimensional honeycomb-like mollusk shell-derived organic template for osteogenesis

Open access
Zhang, Meng, Zhang, Jiting, Ban, Lina, Qiu, Lingxi, Chen, Jisheng, Zhu, Zhihong, Wan, Ying·2020·Biofabrication

Abstract

Layered osteochondral composite scaffolds are considered as a promising strategy for the treatment of osteochondral defects. However, the insufficient osseous support and integration of the subchondral bone layer frequently result in the failure of osteochondral repair. Therefore, it is essentially important to explore new subchondral bone constructs tailored to support bone integration and healing. In this study, a novel three-dimensional porous biomimetic construct (HA/pDA-OTMS) was successfully developed by polydopamine (pDA) regulating hydroxyapatite (HA) microspheres grown in the honeycomb-like mollusk shell-derived organic template (OTMS). The biomimetic OTMS had good mechanical properties, high toughness, biodegradability and excellent biocompatibility. Moreover, the long-range ordered cavity structure of OTMS allowed the smallest material to create the largest and most stable geometric space, endowing it high HA loading capacity. The modification of pDA on OTMS surface effectively promoted the mineral nucleation of HA in the micro-nano cavities of OTMS. The compression mechanical tests showed that the combination of inorganic HA and organic pDA-OTMS greatly improved the mechanical properties of the construct. Additionally, the HA/pDA-OTMS composite provided adequate 3-D support for osteoblast cell attachment, proliferation and differentiation, as well as significantly up-regulated the expression of osteogenesis-related genes. These results demonstrated that as-prepared HA/pDA-OTMS constructs with combined mechanical strength and excellent osteogenic activity show great application prospects in subchondral bone regeneration.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1088/1758-5090/ab8f20

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • HA/PDA-OTMS showed elevated levels of osteogenesis-related genes ALP (~2-fold), OCN (~4.5-fold), and collagen type-1 (~4-fold) after 30 days of culture.

    “It also showed the elevated levels of osteogenesis-related genes such as ALP (~2-fold), OCN (~4.5-fold), collagen type-1 (~4-fold) after 30 days of culture.”

    From Strategies for Using Polydopamine to Induce Biomineralization of Hydroxyapatite on Implant Materials for Bone Tissue Engineering (2020) · cites this paper as [74]

    Section 3.7 reports significantly higher ALP, OCN, and Col-1 mRNA levels in HA/pDA-OTMS groups than in pure OTMS, but does not give the claimed fold changes. Section 2.12 says the cells were cultured for 7 days before gene-expression testing, not 30 days; “30d HA/pDA-OTMS” names a sample group. Page numbers are not available in our copy. (LLM, conf=0.91)

    Experimental — accuracy not yet measured
  • Immobilization of cellular growth factors within mineral deposit coatings could provide prolonged delivery of these biomolecules, thus supporting bone tissue regeneration.

    “Moreover, it was underscored that immobilization of cellular growth factors within the mineral deposit coatings could provide prolonged delivery of these biomolecules, thus supporting bone tissue regeneration [74].”

    From Strategies for Using Polydopamine to Induce Biomineralization of Hydroxyapatite on Implant Materials for Bone Tissue Engineering (2020) · cites this paper as [74]

    Section 3.2 reports that the mineralized HA/pDA-OTMS material adsorbed more of a model protein, BSA, and the Discussion links the constructs to bone healing. Neither section reports immobilizing cellular growth factors within mineral deposits or their prolonged delivery; the protein assay measured adsorption, not release. Page numbers were not available in our copy. (LLM, conf=0.79)

    Experimental — accuracy not yet measured
  • The HA/PDA-OTMS 3D-construct composite offered suitable 3D support for osteoblast cell attachment, proliferation, and differentiation.

    “This 3D-construct composite offered suitable 3D support for osteoblast cell attachment, proliferation, and differentiation.”
  • Biomimetic OTMS allowed the smallest material to generate a stable geometric space, providing elevated HA loading capacity.

    “Due to excellent biocompatibility, this biomimetic OTMS allowed the smallest material to generate a stable geometric space, providing elevated HA loading capacity.”

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Cites

Flagged first, then by citations

Research works printed but not linked: 42

  1. Huey D J, Hu J C and Athanasiou K A 2012 Unlike bone, cartilage regeneration remains elusive Science 338 917-21 · DOI
  2. Zhou J, Xu C, Wu G, Cao X, Zhang L, Zhai Z, Zheng Z, Chen X and Wang Y 2011 In vitro generation of osteochondral differentiation of human marrow mesenchymal stem cells in novel collagen-hydroxyapatite layered scaffolds Acta Biomater 7 3999-4006 · DOI
  3. Jia S et al 2018 Multilayered scaffold with a compact interfacial layer enhances osteochondral defect repair ACS Appl. Mater. Interfaces 10 20296-305 · DOI
  4. Kang H, Zeng Y and Varghese S 2018 Functionally graded multilayer scaffolds for in vivo osteochondral tissue engineering Acta Biomater 78 365-77 · DOI
  5. Man Z et al 2016 Transplantation of allogenic chondrocytes with chitosan hydrogel-demineralized bone matrix hybrid scaffold to repair rabbit cartilage injury Biomaterials 108 157-67 · DOI
  6. Lin P, Zhang R, Wang X, Cai M, Yang J, Yu B and Zhou F 2016 Articular cartilage inspired bilayer tough hydrogel prepared by interfacial modulated polymerization showing excellent combination of high load-bearing and low friction performance ACS Macro Lett. 5 1191-5 · DOI
  7. Chen J, Chen H, Li P, Diao H, Zhu S, Dong L, Wang R, Guo T, Zhao J and Zhang J 2011 Simultaneous regeneration of articular cartilage and subchondral bone in vivo using MSCs induced by a spatially controlled gene delivery system in bilayered integrated scaffolds Biomaterials 32 4793-805 · DOI
  8. Bowland P, Ingham E, Jennings L and Fisher J 2015 Review of the biomechanics and biotribology of osteochondral grafts used for surgical interventions in the knee P I Mech. Eng. H 229 879-88 · DOI
  9. Pallante-Kichura A L, Cory E, Bugbee W D and Sah R L 2013 Bone cysts after osteochondral allograft repair of cartilage defects in goats suggest abnormal interaction between subchondral bone and overlying synovial joint tissues Bone 57 259-68 · DOI
  10. Place E S, Evans N D and Stevens M M 2009 Complexity in biomaterials for tissue engineering Nat. Mater. 8 457-70 · DOI
  11. Hutmacher D W 2000 Scaffolds in tissue engineering bone and cartilage Biomaterials 21 2529-43 · DOI
  12. Li W, Wang D, Yang W and Song Y 2016 Compressive mechanical properties and microstructure of PVA-HA hydrogels for cartilage repair RSC Adv. 6 20166-72 · DOI
  13. Luo X, Zhang L, Morsi Y, Zou Q, Wang Y, Gao S and Li Y 2011 Hydroxyapatite/polyamide66 porous scaffold with an ethylene vinyl acetate surface layer used for simultaneous substitute and repair of articular cartilage and underlying bone Appl. Surf. Sci. 257 9888-94 · DOI
  14. Dauphin Y, Guzman N, Denis A, Cuif J-P and Ortlieb L 2003 Microstructure, nanostructure and composition of the shell of Concholepas concholepas (Gastropoda, Muricidae) Aquat. Living Resour. 16 95-103 · DOI
  15. Tong H, Hu J, Ma W, Zhong G, Yao S and Cao N 2002 In situ analysis of the organic framework in the prismatic layer of mollusc shell Biomaterials 23 2593-8 · DOI
  16. Xiong W, Gao Y, Wu X, Hu X, Lan D, Chen Y, Pu X, Zeng Y, Su J and Zhu Z 2014 Composite of macroporous carbon with honeycomb-like structure from mollusc shell and NiCo2O4 nanowires for high-performance supercapacitor ACS Appl. Mater. Interfaces 6 19416-23 · DOI
  17. Marxen J C, Nimtz M, Becker W and Mann K 2003 The major soluble 19.6 kDa protein of the organic shell matrix of the freshwater snail Biomphalaria glabrata is an N-glycosylated dermatopontin Biochimica Et Biophysica Acta-Proteins Proteomics 1650 92-98 · DOI
  18. Chen W et al 2017 Surface functionalization of titanium implants with chitosan-catechol conjugate for suppression of ROS-induced cells damage and improvement of osteogenesis Biomaterials 114 82-96 · DOI
  19. Kunz W and Kellermeier M 2009 Beyond biomineralization Science 323 344-5 · DOI
  20. Li Q, Li M, Zhu P and Wei S 2012 In vitro synthesis of bioactive hydroxyapatite using sodium hyaluronate as a template J. Mater. Chem. 22 20257-65 · DOI
  21. Deng Y, Sun Y, Chen X, Zhu P and Wei S 2013 Biomimetic synthesis and biocompatibility evaluation of carbonated apatites template-mediated by heparin Mat. Sci. Eng. C-Mater. 33 2905-13 · DOI
  22. Zhang M, Cheng H, Gong Z, Zhang J, Liu X, Wang B, Ban L, Zeng Y and Zhu Z 2017 Fabrication of chitosan-18 β-glycyrrhetinic acid modified titanium implants with nanorod arrays for suppression of osteosarcoma growth and improvement of osteoblasts activity Adv. Funct. Mater. 27 1703932 · DOI
  23. Zhang M, Zhang J, Chen J, Zeng Y, Zhu Z and Wan Y 2019 Fabrication of curcumin-modified TiO2 nanoarrays via cyclodextrin based polymer functional coatings for osteosarcoma therapy Adv. Healthc. Mater. 8 1901031 · DOI
  24. Lee H, Dellatore S M, Miller W M and Messersmith P B 2007 Mussel-inspired surface chemistry for multifunctional coatings Science 318 426-30 · DOI · Paper page
  25. Li M, Liu Q, Jia Z, Xu X, Shi Y, Cheng Y and Zheng Y 2015 Polydopamine-induced nanocomposite Ag/CaP coatings on the surface of titania nanotubes for antibacterial and osteointegration functions J. Mater. Chem. B 3 8796-805 · DOI
  26. Wu C, Han P, Liu X, Xu M, Tian T, Chang J and Xiao Y 2014 Mussel-inspired bioceramics with self-assembled Ca-P/polydopamine composite nanolayer: preparation, formation mechanism, improved cellular bioactivity and osteogenic differentiation of bone marrow stromal cells Acta Biomater 10 428-38 · DOI
  27. Kokubo T and Takadama H 2006 How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27 2907-15 · DOI
  28. He Q, Huang Z, Liu Y, Chen W and Xu T 2007 Template-directed one-step synthesis of flowerlike porous carbonated hydroxyapatite spheres Mater. Lett. 61 141-3 · DOI
  29. Panjian L, Kangasniemi I, de Groot K and Kokubo T 1994 Bonelike hydroxyapatite induction by a gel-derived titania on a titanium substrate J. Am. Ceram. Soc. 77 1307-12 · DOI · Paper page
  30. Murugan R and Ramakrishna S 2004 Bioresorbable composite bone paste using polysaccharide based nano hydroxyapatite Biomaterials 25 3829-35 · DOI
  31. Zhu L, Lu Y, Wang Y, Zhang L and Wang W 2012 Preparation and characterization of dopamine-decorated hydrophilic carbon black Appl. Surf. Sci. 258 5387-93 · DOI
  32. Antonakos A, Liarokapis E and Leventouri T 2007 Micro-Raman and FTIR studies of synthetic and natural apatites Biomaterials 28 3043-54 · DOI
  33. Lee Y, Hahm Y M, Matsuya S, Nakagawa M and Ishikawa K 2007 Characterization of macroporous carbonate- substituted hydroxyapatite bodies prepared in different phosphate solutions J. Mater. Sci. 42 7843-9 · DOI
  34. Kim S and Park C B 2010 Mussel-inspired transformation of CaCO3 to bone minerals Biomaterials 31 6628-34 · DOI · Paper page
  35. Liu W, Yeh Y-C, Lipner J, Xie J, Sung H-W, Thomopoulos S and Xia Y 2011 Enhancing the stiffness of electrospun nanofiber scaffolds with a controlled surface coating and mineralization Langmuir 27 9088-93 · DOI
  36. Liu H and Webster T J 2007 Nanomedicine for implants: A review of studies and necessary experimental tools Biomaterials 28 354-69 · DOI
  37. Kandori K, Murata K and Ishikawa T 2007 Microcalorimetric study of protein adsorption onto calcium hydroxyapatites Langmuir 23 2064-70 · DOI
  38. Stevens M M and George J H 2005 Exploring and engineering the cell surface interface Science 310 1135-8 · DOI · Paper page
  39. Guo X, Gough J E, Xiao P, Liu J and Shen Z 2007 Fabrication of nanostructured hydroxyapatite and analysis of human osteoblastic cellular response J. Biomed. Mater. Res. A 82A 1022-32 · DOI
  40. Wang Y, Liu L and Guo S 2010 Characterization of biodegradable and cytocompatible nano-hydroxyapatite/polycaprolactone porous scaffolds in degradation in vitro Polym. Degrad. Stab. 95 207-13 · DOI
  41. Webster T J, Ergun C, Doremus R H, Siegel R W and Bizios R 2001 Enhanced osteoclast-like cell functions on nanophase ceramics Biomaterials 22 1327-33 · DOI
  42. Tsai W-B, Chen W-T, Chien H-W, Kuo W-H and Wang M-J 2011 Poly(dopamine) coating of scaffolds for articular cartilage tissue engineering Acta Biomater 7 4187-94 · DOI

Cited by

Sorted by citations

Authors
Zhang, M., Zhang, J., Ban, L., Qiu, L., Chen, J., Zhu, Z., & Wan, Y.
Affiliations
  • Central China Normal University (CN)
  • Huazhong University of Science and Technology (CN)
Corresponding author
  • Zhu, Zhihong
  • Wan, Ying
Venue
Biofabrication
Published
2020-06-09
Volume
12
Issue
3
Pages
035022
ISSN
  • 1758-5082 (ISSN-L)
  • 1758-5090
OpenAlex
W3020816438
Cited by
19
References
4
Citations by year
2026: 2 · 2025: 3 · 2024: 5 · 2023: 3 · 2022: 3 · 2021: 2 · 2020: 1
FWCI
0.71
Type
journal article
Language
en
Open access
Locations
  • Biofabrication (publishedVersion)
  • PubMed (publishedVersion)
Funders
the National Key R&D Program of China (2017YFC1103800)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
  • Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
  • Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
Keywords
polydopamine, hydroxyapatite microspheres, biomimetic scaffolds, bone formation, subchondral bone regeneration, osteochondral defects, mineral nucleation, osteogenic differentiation, mechanical properties
MeSH terms
Adsorption, Alkaline Phosphatase, Animals, Cell Line, Cell Survival, Indoles, Microspheres, Mollusca, Osteogenesis, Polymers, X-Ray Diffraction, Spectroscopy, Fourier Transform Infrared, Durapatite, Cell Shape, Mice, Animal Shells

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review