The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell Writing
Abstract
Novel technologies are emerging that incorporate cells as part of the building blocks for various biomanufacturing processes, such as solid freeform fabricated tissue constructs for tissue regeneration, three-dimensional pharmacokinetic models, cell-based microelectromechanical systems, sensors, and microfluidic devices. However, the effects of these biomanufacturing processes on cells have not been fully studied. This paper examines the effect of solid freeform fabrication-based direct cell writing process, focusing on dispensing pressure and nozzle size, on the viability and functional behavior of HepG2 cells encapsulated within alginate. Our experimental results revealed a process-induced mechanical damage to cell membrane integrity, causing a quantifiable loss in cell viability due to incremental increases and decreases in the studied process parameters of dispensing pressure and nozzle size, respectively. The experimental results also suggested that cells may require a recovery period following direct cell writing biofabrication. The general finding of this study may be applicable to freeform fabrication of cell-based tissue constructs and three-dimensional biological models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Integrins and Signal Transduction Pathways: the Road Taken
Clark, E. A., & Brugge, J. S. (1995) · Science · doi:10.1126/science.7716514 · Cited by 2,937
TENSEGRITY: THE ARCHITECTURAL BASIS OF CELLULAR MECHANOTRANSDUCTION
Ingber, D. E. (1997) · Annual Review of Physiology · doi:10.1146/annurev.physiol.59.1.575 · Cited by 1,566
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Cellular tensegrity: defining new rules of biological design that govern the cytoskeleton
Ingber, D. E. (1993) · Journal of Cell Science · doi:10.1242/jcs.104.3.613 · Cited by 1,155
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Apparent viscosity and cortical tension of blood granulocytes determined by micropipet aspiration
Evans, E., & Yeung, A. (1989) · Biophysical Journal · doi:10.1016/s0006-3495(89)82660-8 · Cited by 788
Mechanical behavior in living cells consistent with the tensegrity model
Wang, N., Naruse, K., Stamenović, D., Fredberg, J. J., Mijailovich, S. M., Tolić-Nørrelykke, I. M., Polte, T., Mannix, R., & Ingber, D. E. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.141199598 · Cited by 741
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Plopper, G. E., McNamee, H. P., Dike, L. E., Bojanowski, K., & Ingber, D. E. (1995) · Molecular Biology of the Cell · doi:10.1091/mbc.6.10.1349 · Cited by 504
Microfluidics technology for manipulation and analysis of biological cells
Yi, C., Li, C.-W., Ji, S., & Yang, M. (2006) · Analytica Chimica Acta · doi:10.1016/j.aca.2005.12.037 · Cited by 478
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Bishop, E. S., Mostafa, S., Pakvasa, M., Luu, H. H., Lee, M. J., Wolf, J. M., Ameer, G. A., He, T.-C., & Reid, R. R. (2017) · Genes & Diseases · doi:10.1016/j.gendis.2017.10.002 · Cited by 683
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Self-citationDevelopment of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Self-citation‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Self-citationAlginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Interplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T.-D., Alvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 387
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Bioprinting for cancer research
Knowlton, S., Onal, S., Yu, C. H., Zhao, J. J., & Tasoglu, S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.06.007 · Cited by 361
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00093 · Cited by 320
Tissue Engineering of Articular Cartilage with Biomimetic Zones
Klein, T. J., Malda, J., Sah, R. L., & Hutmacher, D. W. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0563 · Cited by 315
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
Self-citationEvolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting
Moldovan, N. I., Hibino, N., & Nakayama, K. (2017) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2016.0322 · Cited by 296
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
Yu, Y., Zhang, Y., Martin, J. A., & Ozbolat, I. T. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024575 · Cited by 267
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
Modelling tissues in 3D: the next future of pharmaco-toxicology and food research?
Mazzoleni, G., Di Lorenzo, D., & Steimberg, N. (2009) · Genes & Nutrition · doi:10.1007/s12263-008-0107-0 · Cited by 253
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Stepanovska, J., Supova, M., Hanzalek, K., Broz, A., & Matejka, R. (2021) · Biomedicines · doi:10.3390/biomedicines9091137 · Cited by 112
3D inkjet printing of biomaterials: Principles and applications
Barui, S. (2021) · MEDICAL DEVICES & SENSORS · doi:10.1002/mds3.10143 · Cited by 48
Liver microsystems in vitro for drug response
Lee, J.-H., Ho, K.-L., & Fan, S.-K. (2019) · Journal of Biomedical Science · doi:10.1186/s12929-019-0575-0 · Cited by 33
Metadata
- Authors
- Chang, R., Nam, J., & Sun, W.
- Venue
- Tissue Engineering Part A
- Publisher
- SAGE Publications
- Published
- 2008-01
- Volume
- 14
- Issue
- 1
- Pages
- 41-48
- ISSN
- 1937-3341 (ISSN-L)
- 1937-335X
- OpenAlex
- W2016058943
- Cited by
- 549
- References
- 35
- FWCI
- 8.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.