The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Biomaterials by freeze casting
Abstract
The functional requirements for synthetic tissue substitutes appear deceptively simple: they should provide a porous matrix with interconnecting porosity and surface properties that promote rapid tissue ingrowth; at the same time, they should possess sufficient stiffness, strength and toughness to prevent crushing under physiological loads until full integration and healing are reached. Despite extensive efforts and first encouraging results, current biomaterials for tissue regeneration tend to suffer common limitations: insufficient tissue–material interaction and an inherent lack of strength and toughness associated with porosity. The challenge persists to synthesize materials that mimic both structure and mechanical performance of the natural tissue and permit strong tissue–implant interfaces to be formed. In the case of bone substitute materials, for example, the goal is to engineer high-performance composites with effective properties that, similar to natural mineralized tissue, exceed by orders of magnitude the properties of its constituents. It is still difficult with current technology to emulate in synthetic biomaterials multi-level hierarchical composite structures that are thought to be the origin of the observed mechanical property amplification in biological materials. Freeze casting permits to manufacture such complex, hybrid materials through excellent control of structural and mechanical properties. As a processing technique for the manufacture of biomaterials, freeze casting therefore has great promise.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Stability of a Planar Interface During Solidification of a Dilute Binary Alloy
Mullins, W. W., & Sekerka, R. F. (1964) · Journal of Applied Physics · doi:10.1063/1.1713333 · Cited by 3,151
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Petrenko, V. F., & Whitworth, R. W. (1999) · Cited by 1,141
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
ENGINEERING PRINCIPLES OF CLINICAL CELL-BASED TISSUE ENGINEERING
MUSCHLER, G. F., NAKAMOTO, C., & GRIFFITH, L. G. (2004) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200407000-00029 · Cited by 878
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
The mechanical efficiency of natural materials
Wegst, U. G. K., & Ashby, M. F. (2004) · Philosophical Magazine · doi:10.1080/14786430410001680935 · Cited by 821
Self-citationAligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles
Zhang, H., Hussain, I., Brust, M., Butler, M. F., Rannard, S. P., & Cooper, A. I. (2005) · Nature Materials · doi:10.1038/nmat1487 · Cited by 813
Ice-templated porous alumina structures
Deville, S., Saiz, E., & Tomsia, A. P. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.11.003 · Cited by 769
Matrices and scaffolds for delivery of bioactive molecules in bone and cartilage tissue engineering
Lee, S.-H., & Shin, H. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.016 · Cited by 706
Control of pore structure and size in freeze‐dried collagen sponges
Schoof, H., Apel, J., Heschel, I., & Rau, G. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1028 · Cited by 430
Die wissenschaftlichen Grundlagen der Trocknungstechnik
Krischer, O. (1956) · Springer eBooks · doi:10.1007/978-3-662-26010-4 · Cited by 352
Transparent compounds that freeze like metals
Jackson, K. A., & Hunt, J. D. (1965) · Acta Metallurgica · doi:10.1016/0001-6160(65)90061-1 · Cited by 348
Petrenko, V. F., & Whitworth, R. W. (2002) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198518945.001.0001 · Cited by 293
Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating
Munch, E., Saiz, E., Tomsia, A. P., & Deville, S. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03087.x · Cited by 274
Porous Ceramic Bodies with Interconnected Pore Channels by a Novel Freeze Casting Technique
Araki, K., & Halloran, J. W. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00176.x · Cited by 272
Fukasawa, T., Deng, Z., Ando, M., Ohji, T., & Kanzaki, S. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00426.x · Cited by 254
Directionally freeze-cast titanium foam with aligned, elongated pores
Chino, Y., & Dunand, D. C. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.09.002 · Cited by 244
Freeze Casting of Aqueous Alumina Slurries with Glycerol
Sofie, S. W., & Dogan, F. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb00860.x · Cited by 235
Human preadipocytes seeded on freeze-dried collagen scaffolds investigated in vitro and in vivo
von Heimburg, D., Zachariah, S., Kühling, H., Heschel, I., Schoof, H., Hafemann, B., & Pallua, N. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00186-1 · Cited by 229
Macchetta, A., Turner, I. G., & Bowen, C. R. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.009 · Cited by 225
The mechanical properties of the human cervical spinal cordIn Vitro
Bilston, L. E., & Thibault, L. E. (1995) · Annals of Biomedical Engineering · doi:10.1007/bf02770996 · Cited by 224
Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process
Fukasawa, T., Deng, Z.-Y., Ando, M., Ohji, T., & Goto, Y. (2001) · Journal of Materials Science · doi:10.1023/a:1017946518955 · Cited by 212
Interaction of particles and a moving ice-liquid interface
Körber, C., Rau, G., Cosman, M. D., & Cravalho, E. G. (1985) · Journal of Crystal Growth · doi:10.1016/0022-0248(85)90217-9 · Cited by 200
Bozkurt, A., Brook, G. A., Moellers, S., Lassner, F., Sellhaus, B., Weis, J., Woeltje, M., Tank, J., Beckmann, C., Fuchs, P., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0116 · Cited by 188
Chen, R., Wang, C., Huang, Y., Ma, L., & Lin, W. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01957.x · Cited by 185
Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure
Fu, Q., Rahaman, M. N., Dogan, F., & Bal, B. S. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30997 · Cited by 171
Waschkies, T., Oberacker, R., & Hoffmann, M. J. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02673.x · Cited by 153
Ozawa, H., MATSUMOTΟ, T., OHASHI, T., Sato, M., & Kokubun, S. (2001) · Journal of Neurosurgery Spine · doi:10.3171/spi.2001.95.2.0221 · Cited by 152
Lee, E., Koh, Y., Yoon, B., Kim, H., & Kim, H. (2006) · Materials Letters · doi:10.1016/j.matlet.2006.08.065 · Cited by 143
New Freeze‐Casting Technique for Ceramics with Sublimable Vehicles
Araki, K., & Halloran, J. W. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2004.tb06331.x · Cited by 138
Generation of Large Pore Channels for Bone Tissue Engineering Using Camphene‐Based Freeze Casting
Yoon, B., Koh, Y., Park, C.-S., & Kim, H. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01670.x · Cited by 129
Particle Redistribution During Dendritic Solidification of Particle Suspensions
Shanti, N. O., Araki, K., & Halloran, J. W. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01094.x · Cited by 118
Fu, Q., Rahaman, M. N., Dogan, F., & Bal, B. S. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31051 · Cited by 111
Lee, S. H., Jun, S., Kim, H., & Koh, Y. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01834.x · Cited by 105
Araki, K., & Halloran, J. W. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2004.tb06353.x · Cited by 105
Dendritic ice morphology in unidirectionally solidified collagen suspensions
Schoof, H., Bruns, L., Fischer, A., Heschel, I., & Rau, G. (2000) · Journal of Crystal Growth · doi:10.1016/s0022-0248(99)00519-9 · Cited by 102
Möllers, S., Heschel, I., Damink, L. H. H. O., Schügner, F., Deumens, R., Müller, B., Bozkurt, A., Gerardo‐Nava, J., Noth, J., & Brook, G. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0107 · Cited by 100
Freeze-cast hydroxyapatite scaffolds for bone tissue engineering applications
Fu, Q., Rahaman, M. N., Dogan, F., & Bal, B. S. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/2/025005 · Cited by 94
Effect of Polyethylene Glycol on the Microstructure of Freeze‐Cast Alumina
Pekor, C., Kisa, P., & Nettleship, I. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02616.x · Cited by 79
Porous titanium (Ti) scaffolds by freezing TiH2/camphene slurries
Yook, S.-W., Yoon, B., Kim, H., Koh, Y., & Kim, Y. S. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.08.010 · Cited by 75
Yook, S.-W., Kim, H., & Koh, Y. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.03.056 · Cited by 70
Magnification of the Pore size in Biodegradable Collagen Sponges
Kuberka, M., von Heimburg, D., Schoof, H., Heschel, I., & Rau, G. (2002) · The International Journal of Artificial Organs · doi:10.1177/039139880202500111 · Cited by 68
Ice-mould freeze casting of porous ceramic components
Moritz, T., & Richter, H. (2007) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.04.010 · Cited by 61
Porous chitin matrices for tissue engineering: Fabrication and in vitro cytotoxic assessment
Chow, K. S., Khor, E., & Wan, A. C. A. (2001) · Journal of Polymer Research · doi:10.1007/s10965-006-0132-x · Cited by 60
Morphological analysis of pores in directionally freeze-cast titanium foams
Fife, J. L., Li, J. C., Dunand, D. C., & Voorhees, P. W. (2009) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2009.0023 · Cited by 28
Failure Processes in Hard and Soft Tissues
Taylor, D. M. (2003) · Elsevier eBooks · doi:10.1016/b0-08-043749-4/09012-1 · Cited by 27
Structural and Tissue Reaction Properties of Novel Hydroxyapatite Ceramics with Unidirectional Pores
Suetsugu, Y., Hotta, Y., Iwasashi, M., Sakane, M., Kikuchi, M., Ikoma, T., Higaki, T., Ochiai, N., & Tanaka, M. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.330-332.1003 · Cited by 22
Cited by
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Self-citationA Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Metadata
- Authors
- Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M.
- Venue
- Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Publisher
- The Royal Society
- Published
- 2010-04-28
- Volume
- 368
- Issue
- 1917
- Pages
- 2099-2121
- ISSN
- 1364-503X (ISSN-L)
- 1471-2962
- OpenAlex
- W2147979150
- Cited by
- 375
- References
- 57
- FWCI
- 9.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.