Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
With the developments and applications of the new information technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, a smart manufacturing era is coming. At the same time, various national manufacturing development strategies have been put forward, such as Industry 4.0, Industrial Internet, manufacturing based on Cyber-Physical System, and Made in China 2025. However, one of specific challenges to achieve smart manufacturing with these strategies is how to converge the manufacturing physical world and the virtual world, so as to realize a series of smart operations in the manufacturing process, including smart interconnection, smart interaction, smart control and management, etc. In this context, as a basic unit of manufacturing, shop-floor is required to reach the interaction and convergence between physical and virtual spaces, which is not only the imperative demand of smart manufacturing, but also the evolving trend of itself. Accordingly, a novel concept of digital twin shopfloor (DTS) based on digital twin is explored and its four key components are discussed, including physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor digital twin data. What is more, the operation mechanisms and implementing methods for DTS are studied and key technologies as well as challenges ahead are investigated, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“tracking a product throughout its life cycle [76]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [76]
In the citing paper
“Research indicates that integrating Digital Twins into building management can result in energy savings of up to 30% [10,24,25].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“A Digital Twin is a virtual replica of a physical system, designed to simulate its behavior and performance under varying conditions [9,10].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“The accuracy and effectiveness of DTs heavily depend on the quality of collected data, and inconsistent or incomplete data can lead to inaccurate predictions and inefficient decision-making.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“As a result, maintenance costs in energy-intensive industries have been reduced by 20 to 30 percent.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 1×
“[37], [38].”
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Cyber-physical Production Systems: Roots, Expectations and R&D Challenges
Monostori, L. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.115 · Cited by 1,215
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“[37], [38].”
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480 · cited 1×
“3) Construction and management of SDTD Technologies involve data cleaning, data integration, data fusion, two-way mirrors between physical and virtual data, shop-floor big data [40], etc.”
BackgroundSelf-citationRFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462 · cited 1×
“build an RFID-enabled real-time manufacturing execution system, which provides more practical planning and scheduling decisions for shop-floor [25].”
BackgroundTao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2232936 · Cited by 362 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationSyberfeldt, A., Danielsson, O., & Gustavsson, P. (2017) · IEEE Access · doi:10.1109/access.2017.2703952 · Cited by 221 · cited 1×
“After that, layout optimization [28], production planning [29], [30] and fault diagnosis [31], etc.”
Method
Research works printed but not linked: 1
- tao, 2017, Digital twin workshop: A new paradigm for future workshop, Comput Integr Manuf Syst, 23, 1
Cited by
Items 301–400 of 1,426
Neto, A. A., Carrijo, B. S., Brock, J. G. R., Deschamps, F., & de Lima, E. P. (2021) · Procedia Manufacturing · doi:10.1016/j.promfg.2021.10.060 · Cited by 58
Wu, W. Y., Zhao, Z., Shen, L., Kong, X. T. R., Guo, D., Zhong, R. Y., & Huang, G. Q. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101571 · Cited by 66
Digital Twin and web services for robotic deburring in intelligent manufacturing
Stan, L., Nicolescu, A. F., Pupăză, C., & Jiga, G. G. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01928-x · Cited by 64
“…from industrial-filed perspectives (Stark et al., 2017), (Zhuang et al., 2018), together with their use in various industries, such as manufacturing (Tao & Zhang, 2017), (Zhang et al., 2017), (J. Wang et al., 2019), (Tong et al., 2019) aerospace (Tuegel et al.,…”
BackgroundDigital twin driven production progress prediction for discrete manufacturing workshop
Qian, W., Guo, Y., Zhang, H., Huang, S., Zhang, L., Zhou, H., Fang, W., & Zha, S. (2022) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102456 · Cited by 58
Meta-model-based shop-floor digital twin architecture, modeling and application
Yang, X., Liu, X., Zhang, H., Fu, L., & Yu, Y. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102595 · Cited by 64
Zhang, X., Zheng, L., Fan, W. H., Ji, W., Mao, L., & Wang, L. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102609 · Cited by 65
Digital twins: Transforming the chemical process industry—A review
Pal, P. K., Hens, A., Behera, N., & Lahiri, S. K. (2025) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.25611 · Cited by 74
Towards a Model-Driven Architecture for Interactive Digital Twin Cockpits
Dalibor, M., Michael, J., Rumpe, B., Varga, S., & Wortmann, A. (2020) · International Conference on Conceptual Modeling · doi:10.1007/978-3-030-62522-1_28 · Cited by 62
Digital innovation: An essence for Industry 4.0
Gupta, M., & Jauhar, S. K. (2023) · Thunderbird International Business Review · doi:10.1002/tie.22337 · Cited by 79
A Bibliometric Analysis of Digital Twin in the Supply Chain
Siew, L. W., Hoe, L. W., & Lee, P. F. (2023) · Mathematics · doi:10.3390/math11153350 · Cited by 64
“The second cluster, which is green, involves the implementation and integration of digital twin to increase the efficiency in industrial uses, with keywords such as”
InfluentialBackground and Concept of Digital Twin
Tao, F., Zhang, M., & Nee, A. Y. C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817630-6.00001-1 · Cited by 72
Self-citationA consistency method for digital twin model of human-robot collaboration
Ma, X., Qi, Q., Cheng, J., & Tao, F. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.10.012 · Cited by 56
Self-citationDigital twin-based non-destructive testing for structural health monitoring of bridges
Lai, X., Kan, Z., Sun, W. F., Song, X., Tian, B., & Yuan, T. (2023) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2023.2239434 · Cited by 56
“Digital twin, as a promising concept, is widely used for analysis, monitoring, and predictive maintenance of various physical assets, including cities [6,7], factories [8,9], ships [10,11], cranes [12,13], aircrafts [14,15], wind turbines [16,17], and composites [18,19].”
BackgroundThe Digital Twin as a Service Enabler: From the Service Ecosystem to the Simulation Model
Meierhofer, J., West, S., Rapaccini, M., & Barbieri, C. (2020) · Lecture notes in business information processing · doi:10.1007/978-3-030-38724-2_25 · Cited by 65
The digital twin of the quality monitoring and control in the series solar cell production line
Pei, F., Tong, Y., Yuan, M., Ding, K., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.02.001 · Cited by 59
Ali, M. A., Guan, Q., Umer, R., Cantwell, W. J., & Zhang, T. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109091 · Cited by 58
Ni, Z., Liu, Y., Karlsson, M., & Gong, S. (2022) · IEEE Access · doi:10.1109/access.2022.3202181 · Cited by 67
“DTs have been applied in various sectors, such as manufacturing [29], aerospace [26], energy [30], and healthcare [31].”
BackgroundDigital twin technology for road pavement
Talaghat, M. A., Golroo, A., Kharbouch, A., Rasti, M., Heikkilä, R., & Jurva, R. (2024) · Automation in Construction · doi:10.1016/j.autcon.2024.105826 · Cited by 67
The Influence of Smart Manufacturing towards Energy Conservation: A Review
Terry, S., Lu, H., Fidan, I., Zhang, Y., Tantawi, K. H., Guo, T. N., & Asiabanpour, B. (2020) · Technologies · doi:10.3390/technologies8020031 · Cited by 58
“Various types of simulation, analysis, and even the application of AI-based digital models, can ensure its applicability to the real physical world [25,34,37].”
BackgroundA Survey on Social Manufacturing: A Paradigm Shift for Smart Prosumers
Xiong, G., Tamir, T. S., Shen, Z., Shang, X., Wu, H., & Wang, F. (2022) · IEEE Transactions on Computational Social Systems · doi:10.1109/tcss.2022.3180201 · Cited by 55
“Digital twin technologies have been adopted in the manufacturing industry, such as product design, production planning, and maintenance [156]–[158].”
MethodCui, Z., Yang, X., Yue, J., Liu, X., Tao, W., Xia, Q., & Wu, C. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.07.016 · Cited by 58
Sayed, A. N., Bensaali, F., Himeur, Y., Dimitrakopoulos, G. J., & Varlamis, I. (2024) · Energy and Buildings · doi:10.1016/j.enbuild.2024.115151 · Cited by 73
DIGITAL MANUFACTURING: REQUIREMENTS AND CHALLENGES FOR IMPLEMENTING DIGITAL SURROGATES
Shao, G., & Kibira, D. (2018) · Winter Simulation Conference · doi:10.1109/wsc.2018.8632242 · Cited by 54
The Hitchhiker’s Guide to Fused Twins: A Review of Access to Digital Twins In Situ in Smart Cities
Grübel, J., Thrash, T., Aguilar, L., Gath-Morad, M., Chatain, J., Sumner, R. W., Hölscher, C., & Schinazi, V. R. (2022) · Remote Sensing · doi:10.3390/rs14133095 · Cited by 67
“the Virtual Environment, and the Connection Environment [23].”
BackgroundMethodInfluentialA survey of feature modeling methods: Historical evolution and new development
Li, L., Zheng, Y., Yang, M., Leng, J., Cheng, Z., Xie, Y., Jiang, P., & Ma, Y. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101851 · Cited by 60
Zhu, Z., Lin, Z., Huang, J., Zheng, L., & He, B. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11827-x · Cited by 54
“DT has excellent potential in robot milling modeling simulation and monitoring with its characteristics of multi-dimensionality, multi-physical quantity, high fidelity, virtual-real fusion, and real-time interaction [25].”
BackgroundDynamic scheduling of multi-memory process flexible job shop problem based on digital twin
Li, Z., & Chen, Y. (2023) · Computers & Industrial Engineering · doi:10.1016/j.cie.2023.109498 · Cited by 58
A digital twin-based decision support approach for AGV scheduling
Gao, Y., Chang, D., Chen, C., & Sha, M. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107687 · Cited by 51
Digital twin enabled transition towards the smart electric vehicle charging infrastructure: A review
Yu, G., Ye, X., Xia, X., & Chen, Y. (2024) · Sustainable Cities and Society · doi:10.1016/j.scs.2024.105479 · Cited by 60
Sghiri, A., Gallab, M., Merzouk, S., & Assoul, S. (2025) · Buildings · doi:10.3390/buildings15030498 · Cited by 72
Current Status and Prospects of Digital Twin Approaches in Structural Health Monitoring
Wang, Q., Huang, B., Gao, Y., & Jiao, C. (2025) · Buildings · doi:10.3390/buildings15071021 · Cited by 59
Challenges in Digital Twin Development for Cyber-Physical Production Systems
Park, H., Easwaran, A., & Andalam, S. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-23703-5_2 · Cited by 63
“An architecture of digital twin shop-floor (DTS) is presented in [34].”
Park, K. T., Yang, J., & Noh, S. D. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01586-x · Cited by 54
Using a Digital Twin for Production Planning and Control in Industry 4.0
Agostino, Í. R. S., Broda, E., Frazzon, E. M., & Freitag, M. (2020) · International series in management science/operations research/International series in operations research & management science · doi:10.1007/978-3-030-43177-8_3 · Cited by 69
Chang, K.-H., Sun, Y.-J., Lai, C.-A., Chen, L.-D., Wang, C., Chen, C.-J., & Lin, C. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1870015 · Cited by 55
“…particular, the virtual entity uses historical performance data of the physical counterpart, taken from multiple sources such as sensors and expert domain knowledge, in order to create a digital twinmodel that predicts and optimises the performance of the said physical system (Tao and Zhang 2017).”
BackgroundModelling and online training method for digital twin workshop
Zhang, L., Guo, Y., Qian, W., Wang, W., Liu, D.-Y., & Liu, S. (2022) · International Journal of Production Research · doi:10.1080/00207543.2022.2051088 · Cited by 47
Operation twins: production-intralogistics synchronisation in Industry 4.0
Li, M., Guo, D., Li, M., Qu, T., & Huang, G. Q. (2022) · International Journal of Production Research · doi:10.1080/00207543.2022.2098874 · Cited by 54
“IoT-enabled ubiquitous connection, digitisation, and sharing have the potential to realise real-time visibility and information-sharing of the PiL by creating a digital representation of the physical entity and synchronising them (Tao and Zhang 2017; Guo et al. 2020b).”
BackgroundEmpowering digital twins with eXtended reality collaborations
Stacchio, L., Angeli, A., & Marfia, G. (2022) · Virtual Reality & Intelligent Hardware · doi:10.1016/j.vrih.2022.06.004 · Cited by 57
Exploring digital twins for transport planning: a review
Nag, D., Brandel-Tanis, F., Pramestri, Z. A., Pitera, K., & Frøyen, Y. K. (2025) · European Transport Research Review · doi:10.1186/s12544-025-00713-0 · Cited by 62
“1, centre) [55, 150].”
Building blocks for digital twin of reconfigurable machine tools from design perspective
Huang, S., Wang, G., & Yan, Y. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1847340 · Cited by 57
“…twin, it is spreading rapidly from product domain (Shafto et al. 2010; Tuegel et al.2011; Tao et al. 2018b; Tao et al.2019a , 2019b) to manufacturing domain (Tao and Zhang 2017; Ding et al.2019; Liu et al. 2019c; Wang et al. 2019; Lu et al. 2020a; Polini and Cor-rado 2020; Zhou et al. 2020).”
BackgroundTwinbase: Open-Source Server Software for the Digital Twin Web
Autiosalo, J., Siegel, J. E., & Tammi, K. (2021) · IEEE Access · doi:10.1109/access.2021.3119487 · Cited by 50
“Industrial cases have emphasized simulation-focused tasks such as mirroring [1] the life of space vehicles [2], [3], factory floor planning [4], and product design [5].”
BackgroundLiu, S., Sun, Y., Zheng, P., Lu, Y., & Bao, J. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.12.008 · Cited by 52
Digital Twin-Driven Adaptive Scheduling for Flexible Job Shops
Liu, L., Guo, K., Gao, Z., Li, J., & Sun, J. (2022) · Sustainability · doi:10.3390/su14095340 · Cited by 52
“Job O1 O2 O3 O4 O5 J1 [3,8] [1,7] [1,4] [2,8] [6,7] J2 [2,8] [4,7] [3,5] [1,3] [2,3] J3 [1,4,6] [4,5] [2,5] [3,8] [7] J4 [4,8] [1,2] [6,8] [6] [6,7] J5 [1,6] [2,5] [1,4] [2,7] [3,8] J6 [1,2,4,7] [1,6] [4,8] [1,3] [6] J7 [1,6] [2,5] [1,4] [7,8] [3,7] J8 [2,5,7] [2,4] [5,8] [1,3] [3,8]”
MethodDigital twin-driven intelligent production line for automotive MEMS pressure sensors
Zhang, Q., Shen, S., Li, H., Cao, W., Tang, W., Jiang, J., Deng, M., Zhang, Y., Gu, B., Wu, K., et al. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101779 · Cited by 52
Sun, Z., Zhang, R., & Zhu, X. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.02.016 · Cited by 56
Digital Twin Smart Water Conservancy: Status, Challenges, and Prospects
Li, W., Ma, Z., Li, J., Li, Q., Li, Y., & Yang, J. (2024) · Water · doi:10.3390/w16142038 · Cited by 63
A Survey on the Necessity for a Digital Twin of Production in the Automotive Industry
Biesinger, F., Krass, B., & Weyrich, M. (2019) · International Conference on Mechatronics Technology (ICMT) · doi:10.1109/icmect.2019.8932144 · Cited by 60
“It is essential to achieve convergence between the physical and virtual spaces for manufacturing [29].”
BackgroundMethodology to develop Digital Twins for energy efficient customizable IoT-Products
Riedelsheimer, T., Gogineni, S., & Stark, R. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.01.040 · Cited by 49
The ontology-based modeling and evolution of digital twin for assembly workshop
Bao, Q., Zhao, G. L., Yu, Y., Dai, S. L., & Wang, W. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07773-1 · Cited by 52
imseStudio: blockchain-enabled secure digital twin platform for service manufacturing
Liu, X., Jiang, Y., Wang, Z., Zhong, R. Y., Cheung, H. H., & Huang, G. Q. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.2003462 · Cited by 54
“The most critical components of the digital twin include physical entities, digital models and data connection (Tao and Zhang 2017).”
BackgroundNewrzella, S. R., Franklin, D. W., & Haider, S. (2022) · IEEE Access · doi:10.1109/access.2022.3202941 · Cited by 58
“942 Other architectures specify the decision and user inter943 facing element as shop floor service system [19], service 944 platform [20], artificial intelligence and user interface [22], 945”
BackgroundMethodInfluentialA conceptual framework for supply chain digital twins – development and evaluation
Freese, F., & Ludwig, A. (2024) · International Journal of Logistics Research and Applications · doi:10.1080/13675567.2024.2324895 · Cited by 61
“The idea of digital twins has been around since the 1990s (Gelernter 1991), but only the Internet of Things concept has promoted its implementation (Tao and Zhang 2017).”
InfluentialDigital twin-enabled smart industrial systems: recent developments and future perspectives
Kuo, Y., Pilati, F., Qu, T., & Huang, G. Q. (2021) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2021.1959710 · Cited by 57
“The convergence between the physical assets and the virtual greatly determines the success of the applications (Tao and Zhang 2017; Bortolini et al. 2018).”
BackgroundCheng, D.-J., Zhang, J., Hu, Z., Xu, S.-H., & Fang, X. (2020) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-020-00403-y · Cited by 50
Li, Y., Su, D. A., & Mardani, A. (2023) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2023.122794 · Cited by 57
Could digital twins be the next revolution in healthcare?
El-Warrak, L. D. O., & de Farias, C. M. (2024) · European Journal of Public Health · doi:10.3390/computers13090228 · Cited by 51
Oliveira, L. M. C., Dias, R. O. M., Rebello, C. M., Martins, M. A. F., Rodrigues, A. E., Ribeiro, A. M., & Nogueira, I. B. R. (2021) · AI · doi:10.3390/ai2030027 · Cited by 54
A Digital Twin Simulation Platform for Multi-rotor UAV
Yang, Y., Meng, W., & Zhu, S. (2020) · International Conference on Information, Cybernetics, and Computational Social Systems (ICCSS) · doi:10.1109/iccss52145.2020.9336872 · Cited by 54
A digital twin framework for large comprehensive ports and a case study of Qingdao Port
Yang, W., Bao, X., Zheng, Y., Zhang, L., Zhang, Z., Zhang, Z., & Li, L. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10625-1 · Cited by 52
Dall’Ora, N., Alamin, K. S. S., Fraccaroli, E., Poncino, M., Quaglia, D., & Vinco, S. (2021) · IEEE Transactions on Emerging Topics in Computing · doi:10.1109/tetc.2021.3132432 · Cited by 57
“The digital twin concept merges all digital transformation aspects: data, both sensed from the line equipment and generated by the company management infrastructure, is collected and merged to enable what-if analysis and future predictions, to monitor the evolution of the line at runtime, and to improve the production…”
BackgroundInfluentialProduct redesign using functional backtrack with digital twin
Dong, Y., Tan, R., Zhang, P., Peng, Q., & Shao, P. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2021.101361 · Cited by 48
Digital twins for electro-physical, chemical, and photonic processes
Guo, Y. B., Klink, A., Bártolo, P., & Guo, W. (2023) · CIRP Annals · doi:10.1016/j.cirp.2023.05.007 · Cited by 49
A Digital Twin-based on-site quality assessment method for aero-engine assembly
Li, J., Zhao, G. L., Zhang, P., Xu, M., He, C., & Pengfei, H. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.10.008 · Cited by 45
Yang, Y., Li, M., Yu, C., & Zhong, R. Y. (2024) · Automation in Construction · doi:10.1016/j.autcon.2024.105640 · Cited by 48
Cameron, D., Waaler, A., & Komulainen, T. M. (2018) · Linköping electronic conference proceedings · doi:10.3384/ecp181539 · Cited by 54
“A digital twin can make a product smart, personalized, sustainable, green, and service-oriented in an interconnected and interactive way (Tao and Zhang 2017).”
BackgroundIndividualizing Locator Adjustments of Assembly Fixtures Using a Digital Twin
Aderiani, A. R., Wärmefjord, K., Söderberg, R. C., & Lindkvist, L. (2019) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4043529 · Cited by 45
Schützer, K., Bertazzi, J. D. A., Sallati, C., Anderl, R., & Zancul, E. D. S. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.212 · Cited by 54
A Framework for Using Data as an Engineering Tool for Sustainable Cyber-Physical Systems
Broo, D. G., & Schooling, J. M. (2021) · IEEE Access · doi:10.1109/access.2021.3055652 · Cited by 49
“implementation and integration [41]–[45].”
A Digital Twin-Based Multi-modal UI Adaptation Framework for Assistance Systems in Industry 4.0
Josifovska, K., Yigitbas, E., & Engels, G. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-22636-7_30 · Cited by 60
Shop floor management system in the context of smart manufacturing: a case study
Torres, D., Pimentel, C., & Duarte, S. (2019) · International Journal of Lean Six Sigma · doi:10.1108/ijlss-12-2017-0151 · Cited by 54
Lin-li, L., Гу, Ф., Li, H., Guo, J., & Xin-jian, G. (2021) · IEEE Access · doi:10.1109/access.2021.3108218 · Cited by 50
“It has also been applied to optimize production in a digital twin shop-floor [27].”
MethodLeveraging Digital Twins for Assisted Learning of Flexible Manufacturing Systems
David, J., Lobov, A., & Lanz, M. (2018) · 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2018.8472083 · Cited by 43
“Tao [12] also presents a Digital Twin shop floor model where he accentuates the convergence of the physical and virtual worlds on the factory floor.”
BackgroundSynthetic datasets for Deep Learning in computer-vision assisted tasks in manufacturing
Manettas, C., Nikolakis, N., & Alexopoulos, K. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.10.038 · Cited by 51
Aivaliotis, P., Arkouli, Z., Georgoulias, K., & Makris, S. (2023) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2022.2162591 · Cited by 44
“The ‘Digital Twin Shop-floor’ architecture has been proposed by (Tao and Zhang 2017) including the physical, and the virtual shop-floor, as well as a service system for the shop-floor, and shop-floor digital twin data.”
BackgroundGao, Q., Liu, J., Li, H., Zhuang, C., & Liu, Z. (2024) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2024.102786 · Cited by 43
Digital twin technology in smart cities: A step toward intelligent urban management
Yessef, M., Hakam, Y., Tabaa, M., Alammar, M. M., & Elbarbary, Z. M. S. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.11.097 · Cited by 50
Digital twin for geometric feature online inspection system of car body-in-white
Zheng, Y., Chen, L., Lu, X., Sen, Y., & Cheng, H. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1736637 · Cited by 46
“Data interaction between physical system and virtual model, virtual and real mapping technology are the key technologies to achieve DT (Tao and Zhang 2017).”
MethodBarkokébas, B., Al‐Hussein, M., & Hamzeh, F. (2022) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0002420 · Cited by 50
Data-driven digital twin method for leak detection in natural gas pipelines
Jing, L., Ma, L., Liang, S., Zhang, H., Zuo, Z., & Dai, J. (2023) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2023.108833 · Cited by 48
A Digital Twin use cases classification and definition framework based on Industrial feedback
Abisset‐Chavanne, E., Coupaye, T., Golra, F. R., Lamy, D., Piel, A., Scart, O., & Primet, P. V.-B. (2024) · Computers in Industry · doi:10.1016/j.compind.2024.104113 · Cited by 52
Digital Triplet Approach for Real-Time Monitoring and Control of an Elevator Security System
Gichane, M. M., Byiringiro, J. B., Chesang, A. K., Nyaga, P. M., Langat, R. K., Smajic, H., & Kiiru, C. W. (2020) · Designs · doi:10.3390/designs4020009 · Cited by 41
“Integration of such features into the Digital Twin technology has been explored in various manufacturing scenarios, as demonstrated by [15–18].”
MethodLi, L., Liu, D., Liu, J., Zhou, H., & Zhou, J. (2020) · Scanning · doi:10.1155/2020/3758730 · Cited by 49
A subject-oriented reference model for Digital Twins
Bönsch, J., Elstermann, M., Kimmig, A., & Ovtcharova, J. (2022) · Computers & Industrial Engineering · doi:10.1016/j.cie.2022.108556 · Cited by 54
Zhao, G., Cui, Z., Xu, J., Liu, W., & Ma, S. (2022) · Energy · doi:10.1016/j.energy.2022.124492 · Cited by 41
Tian, S., Wang, T., Zhang, L., & Wu, X. (2019) · IEEE Access · doi:10.1109/access.2019.2915948 · Cited by 41
Efficient Procedure of Building University Campus Models for Digital Twin Simulation
Azfar, T., Weidner, J. S., Raheem, A., Ke, R., & Cheu, R. L. (2022) · IEEE Journal of Radio Frequency Identification · doi:10.1109/jrfid.2022.3212957 · Cited by 46
“In manufacturing and robotics applications, digital models are highly precise representations of real world objects, with the fidelity of surrounding environment depending on the intended use case [2].”
BackgroundConstruction and application of smart factory digital twin system based on DTME
Xia, L., Lu, J., Zhang, H., Xu, M., & Li, Z. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08971-1 · Cited by 47
Graphene nanoparticles as data generating digital materials in industry 4.0
Ali, M. A., Irfan, M. S., Khan, T., Khalid, M. Y., & Umer, R. (2023) · Scientific Reports · doi:10.1038/s41598-023-31672-y · Cited by 41
Knowledge-graph-based multi-domain model integration method for digital-twin workshops
Wang, X., Hu, X., Ren, Z., Tian, T., & Wan, J. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11874-4 · Cited by 46
“The proposed five components correspond to physical space, virtual space, data, connection, and service respectively in the DTW architecture [33] from the standpoint of model integration.”
BackgroundMulti‐dimensional digital twin of energy storage system for electric vehicles: A brief review
Vandana, Garg, A., & Panigrahi, B. (2021) · Energy Storage · doi:10.1002/est2.242 · Cited by 40
“The key to achieving such goals is to realize the interaction and integration of physical manufacturing and cyber information.(3) Nowadays, many enterprises have established initial intelligent production lines.”
BackgroundMethodInfluentialDigital Twin Integration in Multi-Agent Cyber Physical Manufacturing Systems
Latsou, C., Farsi, M., Erkoyuncu, J. A., & Morris, G. (2021) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2021.08.096 · Cited by 45
Digital Twin Driven End-Face Defect Control Method for Hot-Rolled Coil With Cloud-Edge Collaboration
Xiang, F., Shun, Z., Zuo, Y. N., & Tao, F. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3188508 · Cited by 40
“[18] proposed the concept of DT Shop-Floor, and elaborated the DT 5-D model [19].”
MethodSelf-citationLiu, J., Ji, Q., Zhang, X.-H., Chen, Y., Zhang, Y., Liu, X.-J., & Tang, M.-M. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02212-2 · Cited by 36
“Subsequently, the 5D model of the digital twin workshop is creatively proposed by Tao (2017), including the physical entity model, the connection model, the virtual model, the service model, and the twin data model.”
Li, Z., Mei, X., Sun, Z., Xu, J., Zhang, J., Zhang, D., & Zhu, J. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02424-0 · Cited by 46
“ECL-devices are deployed in TAL, with each machine equipped with an industrial PC, programmable logic controller, 5G WiFi terminal, and data acquisition device.”
InfluentialDynamic resource allocation optimization for digital twin-driven smart shopfloor
Zhang, H., Zhang, G., & Yan, Q. (2018) · IEEE International Conference on Networking, Sensing and Control (ICNSC) · doi:10.1109/icnsc.2018.8361283 · Cited by 42
“suggested a novel concept of digital twin shopfloor (DTS) based on digital twin[18].”
BackgroundZhang, J., Liu, J., Zhuang, C., Guo, H., & Ma, H. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-10815-5 · Cited by 46
Cyber-Physical Manufacturing Systems
Tilbury, D. M. (2019) · Annual Review of Control Robotics and Autonomous Systems · doi:10.1146/annurev-control-053018-023652 · Cited by 45
Digital twins in manufacturing: An assessment of key features
Neto, A. A., da Silva, E. R., Deschamps, F., & de Lima, E. P. (2021) · Procedia CIRP · doi:10.1016/j.procir.2020.05.222 · Cited by 46
Drone-Based AI and 3D Reconstruction for Digital Twin Augmentation
To, A., Liu, M., Hairul, M. H. B. M., Davis, J. G., Lee, J. S. A., Hesse, H., & Nguyen, H. D. (2021) · Lecture notes in computer science · doi:10.1007/978-3-030-77626-8_35 · Cited by 53
Khan, T., Ali, M. A., Irfan, M. S., Khan, K. A., Liao, K., & Umer, R. (2022) · Polymer Composites · doi:10.1002/pc.26587 · Cited by 38
Metadata
- Authors
- Tao, F., & Zhang, M.
- Affiliations
- Beihang University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 20418-20427
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2757110387
- Cited by
- 1,397
- References
- 40
- Citations by year
- 2026: 155 · 2025: 179 · 2024: 178 · 2023: 232 · 2022: 207 · 2021: 180 · 2020: 135 · 2019: 90 · 2018: 40 · 2017: 1
- FWCI
- 79.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51522501)
- National Key Research and Development Program of China (2016YFB1101700)
- Beijing Nova Program in China (Z161100004916063)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, smart manufacturing, shop floor, Industry 4.0, cyber-physical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.