CoChat

Transient Thermal Performance of IGBT Power Modules Attached by Low-Temperature Sintered Nanosilver

Chen, Gang, Han, Dan, Mei, Yun-Hui, Cao, Xiao, Wang, Tao, Chen, Xu, Lu, Guo-Quan · 2012 · IEEE Transactions on Device and Materials Reliability

The DOI matches its Crossref record; 19 of the 20 references it cites were found in a registry or an index.

Abstract

Recently, to accurately study the transient thermal behavior of power modules, a transient thermal measurement system was developed to investigate the transient thermal behavior of insulated-gate bipolar transistor (IGBT) modules attached by nanosilver paste and two kinds of lead-free solders. We found that the transient thermal impedance of IGBT modules attached by nanosilver paste was 9% lower than that of the modules using SAC305 and SN100C with 40-ms heating pulse. In addition, finite-element analysis is employed to simulate thermal performance of the IGBT devices. The simulation shows that the transient thermal impedance of IGBT modules attached by nanosilver paste was also lower than that of the modules using lead-free solders. A convenient way was introduced to well predict the transient thermal behavior of IGBT power module. The calculated results agreed well with the measured one. The interface thermal impedance of sintered nanosilver and SNC100C are calculated to be 0.011 ~ 0.031 K/W and 0.022 ~ 0.042 K/W, respectively.

Overview

Integrity signals

Registry

Crossref · 10.1109/tdmr.2011.2173573

Cites

19 of 19 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 19 references

Research works printed but not linked: 2

  1. zarebski, 1993, Thermal transients in bipolar transistors: Measurements and simulations, Malta Proc Int Conf Inf Syst Methods Appl Eng Probl, 111
  2. mantooth, 2006, Emerging capabilities in electronics technologies for extreme environments. Part I—High temperature electronics, IEEE Power Electron Soc Newsl, 18, 9

Cited by

See all 78

Metadata

Authors
Chen, G., Han, D., Mei, Y.-H., Cao, X., Wang, T., Chen, X., & Lu, G.-Q.
Affiliations
  • Tianjin University (CN)
  • Virginia Tech (US)
Venue
IEEE Transactions on Device and Materials Reliability
Published
2012-03
Volume
12
Issue
1
Pages
124-132
ISSN
  • 1530-4388 (ISSN-L)
  • 1558-2574
OpenAlex
W2091469028
Cited by
71
References
20
Citations by year
2026: 1 · 2025: 4 · 2024: 3 · 2023: 4 · 2022: 6 · 2021: 1 · 2020: 2 · 2019: 6 · 2018: 5 · 2017: 4 · 2016: 7 · 2015: 7 · 2014: 11 · 2013: 8 · 2012: 2
FWCI
4.70
Type
journal article
Language
en
Open access
closed
Locations
IEEE Transactions on Device and Materials Reliability (publishedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
Keywords
IGBT modules, transient thermal impedance, low-temperature soldering, lead-free solder, SAC305, interfacial thermal resistance, power electronics thermal management

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.