The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices
Abstract
The physical understanding of the programming and reliability mechanisms in resistive-switching memory devices requires a detailed characterization of the electrical and thermal conduction properties in the low-resistance state of the memory cell. The aim of this paper is the characterization of the conductive filament (CF), which controls the localized current flow in the low resistive state of the cell. Based on a new technique for evaluating the CF temperature during operation, we perform a statistical characterization of the critical filament temperature for the reset operation, i.e., the transition to the high-resistance state by the thermal dissolution of the CF. The thermal resistance of the CF and the activation energy for the dissolution mechanism are then evaluated, allowing for a physics-based numerical modeling of the reset operation based on CF thermal breakup.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition
Choi, B. J., Jeong, D. S., Kim, S. K., Rohde, C., Choi, S., Oh, J. H., Kim, H. J., Hwang, C. S., Szot, K., Waser, R., et al. (2005) · Journal of Applied Physics · doi:10.1063/1.2001146 · Cited by 1,150
Baek, I. G., Lee, M. S., Sco, S., Lee, M. J., Seo, D. H., Suh, D.-S., Park, J. C., Park, S. O., Kim, H. S., Yoo, I. K., et al. (2005) · IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004. · doi:10.1109/iedm.2004.1419228 · Cited by 530
Electrical observations of filamentary conductions for the resistive memory switching in NiO films
Kim, D. C., Seo, S., Ahn, S. E., Suh, D.-S., Lee, M. J., Park, B.-H., Yoo, I. K., Baek, I. G., Kim, H.-J., Yim, E. K., et al. (2006) · Applied Physics Letters · doi:10.1063/1.2204649 · Cited by 526
Dielectric breakdown mechanisms in gate oxides
Lombardo, S., Stathis, J. H., Linder, B. P., Pey, K. L., Palumbo, F., & Tung, C. H. (2005) · Journal of Applied Physics · doi:10.1063/1.2147714 · Cited by 456
Magnetoresistive random access memory using magnetic tunnel junctions
Tehrani, S., Slaughter, J. M., Deherrera, M., Engel, B. N., Rizzo, N. D., Salter, J., Durlam, M., Dave, R. W., Janesky, J., Butcher, B., et al. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.811804 · Cited by 406
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010584 · Cited by 389
Self-citationShang, D. S., Wang, Q., Chen, L. D., Dong, R., Li, X. M., & Zhang, W. Q. (2006) · Physical Review B · doi:10.1103/physrevb.73.245427 · Cited by 368
Current status of the phase change memory and its future
Lai, S. (2004) · IEEE International Electron Devices Meeting 2003 · doi:10.1109/iedm.2003.1269271 · Cited by 352
Multi-layer cross-point binary oxide resistive memory (OxRRAM) for post-NAND storage application
Baek, I. G., Kim, D. C., Lee, M. J., Kim, H.-J., Yim, E. K., Lee, M. S., Lee, J. E., Ahn, S. E., Seo, S., Lee, J. H., et al. (2006) · IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest. · doi:10.1109/iedm.2005.1609462 · Cited by 218
A Low-Power Nonvolatile Switching Element Based on Copper-Tungsten Oxide Solid Electrolyte
Kozicki, M. N., Gopalan, C., Balakrishnan, M., & Mitkova, M. (2006) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2006.880407 · Cited by 216
Localized switching mechanism in resistive switching of atomic-layer-deposited TiO2 thin films
Kim, K. M., Choi, B. J., & Hwang, C. S. (2007) · Applied Physics Letters · doi:10.1063/1.2748312 · Cited by 213
Non-volatile resistive switching for advanced memory applications
Chen, A., Haddad, S., Wu, Y.-C., Fang, T.-N., Lan, Z., Avanzino, S., Pangrle, S., Buynoski, M., Rathor, M., Cai, W., et al. (2006) · IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest. · doi:10.1109/iedm.2005.1609461 · Cited by 184
Tsunoda, K., Kinoshita, K., Noshiro, H., Yamazaki, Y., Iizuka, T., Ito, Y., Takahashi, A., Okano, A., Sato, Y., Fukano, T., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419060 · Cited by 159
Russo, U., Ielmini, D., Cagli, C., Lacaita, A. L., Spiga, S., Wiemer, C., Perego, M., & Fanciulli, M. (2007) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2007.4419062 · Cited by 147
Self-citationFuture Directions and Challenges for ETox Flash Memory Scaling
Atwood, G. (2004) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2004.837117 · Cited by 99
Random and localized resistive switching observation in Pt/NiO/Pt
Yun, J., Kim, S., Seo, S., Lee, M., Kim, D., Ahn, S., Park, Y., Jiyoung, K., & Shin, H. (2007) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.200701205 · Cited by 88
High Speed Unipolar Switching Resistance RAM (RRAM) Technology
Hosoi, Y., Tamai, Y., Ohnishi, T., Ishihara, K., Shibuya, T., Inoue, Y., Yamazaki, S., Nakano, T., Ohnishi, S., Awaya, N., et al. (2006) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2006.346732 · Cited by 68
Spiga, S., Lamperti, A., Wiemer, C., Perego, M., Cianci, E., Tallarida, G., Lü, H.-L., Alia, M., Volpe, F. G., & Fanciulli, M. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.09.018 · Cited by 58
Future 1T1C FRAM technologies for highly reliable, high density FRAM
Lee, S., & Kim, K. H. (2003) · doi:10.1109/iedm.2002.1175900 · Cited by 18
Strong electron correlation effects in non-volatile electronic memory devices
Inoue, I. H., Rozenberg, M. J., Yasuda, S., Sánchez, M. J., Yamazaki, M., Manago, T., Akinaga, H., Takagi, H., Akoh, H., & Tokura, Y. (2006) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmt.2005.1541421 · Cited by 9
Cited by
Zahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationYu, S., Wu, Y., Jeyasingh, R., Kuzum, D., & Wong, H.-S. P. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2147791 · Cited by 805
A comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Kim, K. M., Jeong, D. S., & Hwang, C. S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254002 · Cited by 631
Metadata
- Authors
- Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2009-02
- Volume
- 56
- Issue
- 2
- Pages
- 186-192
- ISSN
- 0018-9383 (ISSN-L)
- OpenAlex
- W2099004263
- Cited by
- 361
- References
- 20
- FWCI
- 24.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.