The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Cross-Point Memory Array Without Cell Selectors—Device Characteristics and Data Storage Pattern Dependencies
Abstract
Cross-point memory architecture offers high device density, yet it suffers from substantial sneak path leakages, which result in large power dissipation and a small sensing margin. The parasitic resistance associated with the interconnects further degrades the output signal and imposes an additional limitation on the maximum allowable array size. In this paper, we study the device requirements of a resistive cross-point memory array under the worst-case write and read operations. We focus on the data pattern dependence of the memory array and compare the effect of the memory cell resistance values and resistance ratio for determining the maximum array size. The number of cells in the array can reach 106with a signal swing > 50% of the reading voltage when Ronis beyond 3 M and Roff/Ronis greater than 2. A large memory cell resistance value can further reduce the power consumption, obviate the need for a large Roff/Ronratio, and avoid the inclusion of cell selection devices. The effect of the nonlinearity of the I -V characteristics of the memory cells is also investigated. The nonlinearity calls for a substantial tradeoff between the memory cell resistance values and the resistance ratio, and must be taken into consideration for the device design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Resistive switching in transition metal oxides
Sawa, A. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70119-6 · Cited by 2,948
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Åkerman, J. (2005) · Science · doi:10.1126/science.1110549 · Cited by 522
Bozano, L. D., Kean, B. W., Beinhoff, M., Carter, K. R., Rice, P. M., & Scott, J. C. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500130 · Cited by 367
Current status of the phase change memory and its future
Lai, S. (2004) · IEEE International Electron Devices Meeting 2003 · doi:10.1109/iedm.2003.1269271 · Cited by 352
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Scaling analysis of phase-change memory technology
Pirovano, A., Lacaita, A. L., Benvenuti, A., Pellizzer, F., Hudgens, S., & Bez, R. (2004) · IEEE International Electron Devices Meeting 2003 · doi:10.1109/iedm.2003.1269376 · Cited by 256
Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Current status and challenges of ferroelectric memory devices
Kohlstedt, H., Mustafa, Y., Gerber, A., Petraru, A., Fitsilis, M., Meyer, R., Böttger, U., & Waser, R. (2005) · Microelectronic Engineering · doi:10.1016/j.mee.2005.04.084 · Cited by 183
CMOS/nano Co-design for crossbar-based molecular electronic systems
Ziegler, M. M., & Stan, M. R. (2003) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2003.820804 · Cited by 180
Phase change materials and their application to random access memory technology
Raoux, S., Shelby, R. M., Jordan‐Sweet, J., Muñoz, B., Salinga, M., Chen, Y., Shih, Y.-H., Lai, E.-K., & Lee, M.-H. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.08.004 · Cited by 162
Fundamental analysis of resistive nano-crossbars for the use in hybrid Nano/CMOS-memory
Flocke, A., & Noll, T. G. (2007) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2007.4430310 · Cited by 155
Full Integration of Highly Manufacturable 512Mb PRAM based on 90nm Technology
Oh, J. H., Park, J. H., Lim, Y., Lim, H. S., Oh, Y. T., Kim, J. S., Shin, J., Park, J. H., Song, Y. J., Ryoo, K., et al. (2006) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2006.346905 · Cited by 141
Design and analysis of crossbar circuits for molecular nanoelectronics
Ziegler, M. M., & Stan, M. R. (2003) · IEEE Conference on Nanotechnology (IEEE NANO) · doi:10.1109/nano.2002.1032256 · Cited by 98
Cross-point phase change memory with 4F 2 cell size driven by low-contact-resistivity poly-Si diode
Sasago, Kinoshita, Morikawa, Kurotsuchi, Hanzawa, Mine, Shima, Fujisaki, Kume, Moriya, et al. (2009) · Symposium on VLSI Technology · Cited by 76
High Speed Unipolar Switching Resistance RAM (RRAM) Technology
Hosoi, Y., Tamai, Y., Ohnishi, T., Ishihara, K., Shibuya, T., Inoue, Y., Yamazaki, S., Nakano, T., Ohnishi, S., Awaya, N., et al. (2006) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2006.346732 · Cited by 68
A Novel Reference Scheme for Reading Passive Resistive Crossbar Memories
Mustafa, J., & Waser, R. M. (2006) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2006.885016 · Cited by 60
Cross-Point phase change memory with 4F2 cell size driven by low-contact resistivity poly-si diode
Sasago, Y., Kinoshita, M., Morikawa, T., Kurotsuchi, K., Hanzawa, S., Mine, T., Shima, A., Fujisaki, Y., Kume, H., Moriya, H., et al. (2006) · Symposium on VLSI Technology · Cited by 35
Nano-Crossbar Arrays for Nonvolatile Resistive RAM (RRAM) Applications
Nauenheim, C., Kügeler, C., Rüdiger, A., et al. (2008) · IEEE Conference on Nanotechnology (IEEE NANO) · doi:10.1109/nano.2008.141 · Cited by 23
Design and analysis of future memories based on switchable resistive elements
Mustafa, J., & Waser, R. M. (2006) · RWTH Publications (RWTH Aachen) · Cited by 14
Cited by
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Self-citationWong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806
Self-citationNVSim: A Circuit-Level Performance, Energy, and Area Model for Emerging Nonvolatile Memory
Dong, X., Xu, C., Xie, Y., & Jouppi, N. P. (2012) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2012.2185930 · Cited by 1,217
Chen, P.-Y., Peng, X., & Yu, S. (2018) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2018.2789723 · Cited by 652
Emerging Memory Technologies: Recent Trends and Prospects
Yu, S., & Chen, P.-Y. (2016) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2016.2546199 · Cited by 555
Metadata
- Authors
- Liang, J., & Wong, H.-S. P.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2010-10
- Volume
- 57
- Issue
- 10
- Pages
- 2531-2538
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2107012212
- Cited by
- 276
- References
- 21
- FWCI
- 15.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.