The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Cross-Point Memory Array Without Cell Selectors—Device Characteristics and Data Storage Pattern Dependencies
Abstract
Cross-point memory architecture offers high device density, yet it suffers from substantial sneak path leakages, which result in large power dissipation and a small sensing margin. The parasitic resistance associated with the interconnects further degrades the output signal and imposes an additional limitation on the maximum allowable array size. In this paper, we study the device requirements of a resistive cross-point memory array under the worst-case write and read operations. We focus on the data pattern dependence of the memory array and compare the effect of the memory cell resistance values and resistance ratio for determining the maximum array size. The number of cells in the array can reach 106with a signal swing > 50% of the reading voltage when Ronis beyond 3 M and Roff/Ronis greater than 2. A large memory cell resistance value can further reduce the power consumption, obviate the need for a large Roff/Ronratio, and avoid the inclusion of cell selection devices. The effect of the nonlinearity of the I -V characteristics of the memory cells is also investigated. The nonlinearity calls for a substantial tradeoff between the memory cell resistance values and the resistance ratio, and must be taken into consideration for the device design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Resistive switching in transition metal oxides
Sawa, A. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70119-6 · Cited by 2,948
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Åkerman, J. (2005) · Science · doi:10.1126/science.1110549 · Cited by 522
Bozano, L. D., Kean, B. W., Beinhoff, M., Carter, K. R., Rice, P. M., & Scott, J. C. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500130 · Cited by 367
Current status of the phase change memory and its future
Lai, S. (2004) · IEEE International Electron Devices Meeting 2003 · doi:10.1109/iedm.2003.1269271 · Cited by 352
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Scaling analysis of phase-change memory technology
Pirovano, A., Lacaita, A. L., Benvenuti, A., Pellizzer, F., Hudgens, S., & Bez, R. (2004) · IEEE International Electron Devices Meeting 2003 · doi:10.1109/iedm.2003.1269376 · Cited by 256
Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Current status and challenges of ferroelectric memory devices
Kohlstedt, H., Mustafa, Y., Gerber, A., Petraru, A., Fitsilis, M., Meyer, R., Böttger, U., & Waser, R. (2005) · Microelectronic Engineering · doi:10.1016/j.mee.2005.04.084 · Cited by 183
Cited by
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Self-citationWong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806
Self-citationNVSim: A Circuit-Level Performance, Energy, and Area Model for Emerging Nonvolatile Memory
Dong, X., Xu, C., Xie, Y., & Jouppi, N. P. (2012) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2012.2185930 · Cited by 1,217
Chen, P.-Y., Peng, X., & Yu, S. (2018) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2018.2789723 · Cited by 652
Emerging Memory Technologies: Recent Trends and Prospects
Yu, S., & Chen, P.-Y. (2016) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2016.2546199 · Cited by 555
Zhang, F., Zhang, H., Krylyuk, S., Milligan, C. A., Zhu, Y., Zemlyanov, D. Y., Bendersky, L. A., Burton, B. P., Davydov, A. V., & Appenzeller, J. (2019) · Nature Materials · doi:10.1038/s41563-018-0234-y · Cited by 462
Immunity to Device Variations in a Spiking Neural Network With Memristive Nanodevices
Querlioz, D., Bichler, O., Dollfus, P., & Gamrat, C. (2013) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2013.2250995 · Cited by 420
Seok, J. Y., Song, S. J., Yoon, J. H., Yoon, K. J., Park, T. H., Kwon, D. E., Lim, H., Kim, G. H., Jeong, D. S., & Hwang, C. S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303520 · Cited by 383
Beyond von Neumann—logic operations in passive crossbar arrays alongside memory operations
Linn, E., Rosezin, R., Tappertzhofen, S., Böttger, U., & Waser, R. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/30/305205 · Cited by 377
Access devices for 3D crosspoint memory
Burr, G. W., Shenoy, R. S., Virwani, K., Narayanan, P., Padilla, A., Kurdi, B., & Hwang, H. (2014) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4889999 · Cited by 371
Compact Modeling of RRAM Devices and Its Applications in 1T1R and 1S1R Array Design
Chen, P.-Y., & Yu, S. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2492421 · Cited by 364
Yu, S., Chen, H.-Y., Gao, B., Kang, J., & Wong, H.-S. P. (2013) · ACS Nano · doi:10.1021/nn305510u · Cited by 339
Self-citationKim, S., Choi, B., Lim, M., Yoon, J., Lee, J., Kim, H.-D., & Choi, S.-J. (2017) · ACS Nano · doi:10.1021/acsnano.6b07894 · Cited by 338
Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
Zhou, J., Kim, K.-H., & Lu, W. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2310200 · Cited by 310
Spiking Neural Networks Hardware Implementations and Challenges: A Survey
Bouvier, M., Valentian, A., Mesquida, T., Rummens, F., Reyboz, M., Vianello, E., & Beigne, E. (2019) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/3304103 · Cited by 267
Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
Kim, S., Zhou, J., & Lu, W. D. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2327514 · Cited by 219
Vortex: variation-aware training for memristor X-bar
Liu, B., Li, H., Chen, Y., Li, X., Wu, Q., & Huang, T. (2015) · Proceedings of the 52nd Annual Design Automation Conference · doi:10.1145/2744769.2744930 · Cited by 197
RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study
Deng, Y., Huang, P., Chen, B., Yang, X., Gao, B., Wang, J., Zeng, L., Du, G., Kang, J., & Liu, X. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2231683 · Cited by 184
Chen, H.-Y., Yu, S., Gao, B., Huang, P., Kang, J., & Wong, H.-S. P. (2012) · 2012 International Electron Devices Meeting · doi:10.1109/iedm.2012.6479083 · Cited by 144
Self-citationLiang, J., Yeh, S., Wong, S. S., & Wong, H.-S. P. (2013) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/2422094.2422103 · Cited by 71
Self-citationAguirre, F. L., Pazos, S. M., Palumbo, F., Sune, J., & Miranda, E. (2020) · IEEE Access · doi:10.1109/access.2020.3035638 · Cited by 36
“As reference, reported CPA power for other works [6], [8], [14], [79], [80] is also plotted.”
Method
Metadata
- Authors
- Liang, J., & Wong, H.-S. P.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2010-10
- Volume
- 57
- Issue
- 10
- Pages
- 2531-2538
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2107012212
- Cited by
- 276
- References
- 21
- FWCI
- 15.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.