The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Compact Modeling of RRAM Devices and Its Applications in 1T1R and 1S1R Array Design
Abstract
In this paper, we present a compact model for metal-oxide-based resistive random access memory (RRAM) devices with bipolar switching characteristics. The switching mechanism relies on the dynamics of conductive filament growth/dissolution in the oxide layer. Besides the dc and pulsed I-V characteristics, the model also captures the RRAM retention property and the temperature dynamics. The model parameters and the device variations are calibrated from the experimental data of IMEC HfOx-based RRAM devices. The model has been implemented in Verilog-A, which can be easily adapted into the SPICE simulator for the circuit-level analysis. As case studies, we demonstrate the model's applications on the programming scheme design of the 1-transistor-1-resistor array, as well as the design space exploration of the 1-selector-1-resistor cross-point array toward megabit-level.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Numerical Methods for Ordinary Differential Equations
Butcher, J. C. (2016) · Wiley eBooks · doi:10.1002/9781119121534 · Cited by 2,986
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Self-citationResistive Random Access Memory (ReRAM) Based on Metal Oxides
Akinaga, H., & Shima, H. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070830 · Cited by 1,037
Ielmini, D. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2167513 · Cited by 551
Thermochemical description of dielectric breakdown in high dielectric constant materials
McPherson, J., Kim, J.-Y., Shanware, A., & Mogul, H. (2003) · Applied Physics Letters · doi:10.1063/1.1565180 · Cited by 398
Access devices for 3D crosspoint memory
Burr, G. W., Shenoy, R. S., Virwani, K., Narayanan, P., Padilla, A., Kurdi, B., & Hwang, H. (2014) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4889999 · Cited by 371
Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
Zhou, J., Kim, K.-H., & Lu, W. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2310200 · Cited by 310
An 8 Mb Multi-Layered Cross-Point ReRAM Macro With 443 MB/s Write Throughput
Kawahara, A., Azuma, R., Ikeda, Y., Kawai, K., Katoh, Y., Hayakawa, Y., Tsuji, K., Yoneda, S., Himeno, A., Shimakawa, K., et al. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2215121 · Cited by 310
A SPICE Compact Model of Metal Oxide Resistive Switching Memory With Variations
Guan, X., Yu, S., & Wong, H.-S. P. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2012.2210856 · Cited by 282
Self-citationLiang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Research works printed but not linked: 4
- lee, 2012, Varistor-type bidirectional switch (JMAX > 107 A/cm2, selectivity~104) for 3D bipolar resistive memory arrays, Proc Symp VLSI Technol (VLSIT), 37
- 10.1109/TNS.2014.2365493 · doi:10.1109/tns.2014.2365493
- 0, International Technology Roadmap for Semiconductors (ITRS)
- 0, ASU RRAM Model
Cited by
Zahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
Recommended Methods to Study Resistive Switching Devices
Lanza, M., Wong, H. ‐. P., Pop, E., Ielmini, D., Strukov, D., Regan, B. C., Larcher, L., Villena, M. A., Yang, J. J., Goux, L., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800143 · Cited by 674
Skyrmion-based artificial synapses for neuromorphic computing
Song, K. M., Jeong, J.-S., Pan, B., Zhang, X., Xia, J., Cha, S., Park, T.-E., Kim, K., Finizio, S., Raabe, J., et al. (2020) · Nature Electronics · doi:10.1038/s41928-020-0385-0 · Cited by 619
Emerging Memory Technologies: Recent Trends and Prospects
Yu, S., & Chen, P.-Y. (2016) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2016.2546199 · Cited by 555
Self-citationUnderstanding memristive switching via in situ characterization and device modeling
Sun, W., Gao, B., Chi, M., Xia, Q., Yang, J. J., Qian, H., & Wu, H. (2019) · Nature Communications · doi:10.1038/s41467-019-11411-6 · Cited by 482
Brain-inspired computing with memristors: Challenges in devices, circuits, and systems
Zhang, Y., Wang, Z., Zhu, J., Yang, Y., Rao, M., Song, W., Zhuo, Y., Zhang, X., Cui, M., Shen, L., et al. (2020) · Applied Physics Reviews · doi:10.1063/1.5124027 · Cited by 384
An ADC-Less RRAM-Based Computing-in-Memory Macro With Binary CNN for Efficient Edge AI
Li, Y., Chen, J., Wang, L., Zhang, W., Guo, Z., Wang, J., Han, Y., Li, Z., Wang, F., Dou, C., et al. (2023) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2022.3233396 · Cited by 38
Metadata
- Authors
- Chen, P.-Y., & Yu, S.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2015-12
- Volume
- 62
- Issue
- 12
- Pages
- 4022-4028
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2162279286
- Cited by
- 364
- References
- 31
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- Division of Computing and Communication Foundations through the National Science Foundation (1449653)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.