The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress
Abstract
In this paper, a high-efficiency dc-dc converter with high voltage gain and reduced switch stress is proposed. Generally speaking, the utilization of a coupled inductor is useful for raising the step-up ratio of the conventional boost converter. However, the switch surge voltage may be caused by the leakage inductor so that it will result in the requirement of high-voltage-rated devices. In the proposed topology, a three-winding coupled inductor is used for providing a high voltage gain without extreme switch duty-cycle and enhancing the utility rate of magnetic core. Moreover, the energy in the leakage inductor is released directly to the output terminal for avoiding the phenomenon of circulating current and the production of switch surge voltage. In addition, the delay time formed with the cross of primary and secondary currents of the coupled inductor is manipulated to alleviate the reverse-recovery current of the output diode. It can achieve the aim of high-efficiency power conversion. Furthermore, the closed-loop control methodology is utilized in the proposed scheme to overcome the voltage drift problem of the power source under the variation of loads. Some experimental results via an example of a proton exchange membrane fuel cell power source with 250-W nominal rating are given to demonstrate the effectiveness of the proposed power conversion strategy
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
High-efficiency, high step-up DC-DC converters
Zhao, Q., & Lee, F. C. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807188 · Cited by 1,015
Fuel cell systems: efficient, flexible energy conversion for the 21st century
Ellis, M. W., Von Spakovsky, M. R., & Nelson, D. J. (2001) · Proceedings of the IEEE · doi:10.1109/5.975914 · Cited by 449
Fuel cells, an alternative to standard sources of energy
Boudghene Stambouli, A., & Traversa, E. (2002) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(01)00015-6 · Cited by 442
Novel high-efficiency step-up converter
Tseng, K. C., & Liang, T. J. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040022 · Cited by 435
Ro, K., & Rahman, S. (1998) · IEEE Transactions on Energy Conversion · doi:10.1109/60.707608 · Cited by 224
High-efficiency DC/DC converter with high voltage gain
Wai, R. J., & Duan, R. Y. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045067 · Cited by 206
Self-citationIsolated DC-DC converters with high-output voltage for TWTA telecommunication satellite applications
Barbi, I., & Gules, R. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.813762 · Cited by 162
Wai, R., Liu, L., & Duan, R.-Y. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.862251 · Cited by 106
Self-citation
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
High-Performance Stand-Alone Photovoltaic Generation System
Wai, R.-J., Wang, W.-H., & Lin, C.-Y. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.896049 · Cited by 453
Self-citationOverview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2090362 · Cited by 412
A Modified SEPIC Converter With High Static Gain for Renewable Applications
Gules, R., dos Santos, W. M., dos Reis, F. A., Romaneli, E. F. R., & Badin, A. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2296053 · Cited by 280
Banaei, M. R., & Sani, S. G. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2799876 · Cited by 276
A High Step-Up Converter With a Voltage Multiplier Module for a Photovoltaic System
Tseng, K.-C., Huang, C.-C., & Shih, W.-Y. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2217157 · Cited by 272
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H., Kim, M.-S., Cho, H.-G., & Kim, H.-J. (2019) · Electronics · doi:10.3390/electronics9010031 · Cited by 269
Harfman Todorovic, M., Palma, L., & Enjeti, P. N. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911200 · Cited by 263
Three-level bidirectional converter for fuel-cell/battery hybrid power system
Jin, K., Yang, M., Ruan, X., & Xu, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031197 · Cited by 245
Metadata
- Authors
- Wai, R.-J., Lin, C.-Y., Duan, R.-Y., & Chang, Y.-R.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-02
- Volume
- 54
- Issue
- 1
- Pages
- 354-364
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2177150606
- Cited by
- 450
- References
- 10
- FWCI
- 20.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.