The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges
Abstract
Fractional-slot concentrated-winding (FSCW) synchronous permanent magnet (PM) machines have been gaining interest over the last few years. This is mainly due to the several advantages that this type of windings provides. These include high-power density, high efficiency, short end turns, high slot fill factor particularly when coupled with segmented stator structures, low cogging torque, flux-weakening capability, and fault tolerance. This paper is going to provide a thorough analysis of FSCW synchronous PM machines in terms of opportunities and challenges. This paper will cover the theory and design of FSCW synchronous PM machines, achieving high-power density, flux-weakening capability, comparison of single- versus double-layer windings, fault-tolerance rotor losses, parasitic effects, comparison of interior versus surface PM machines, and various types of machines. This paper will also provide a summary of the commercial applications that involve FSCW synchronous PM machines.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of high performance PM motors with concentrated windings
Cros, J., & Viarouge, P. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.1009476 · Cited by 667
Design considerations for fractional-slot winding configurations of synchronous machines
Bianchi, N., Bolognani, S., Pre, M. D., & Grezzani, G. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.876070 · Cited by 447
Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated Windings
EL-Refaie, A. M., & Jahns, T. M. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847312 · Cited by 400
Self-citationWinding factors and Joule losses of permanent magnet machines with concentrated windings
Magnussen, F., & Sadarangani, C. (2003) · IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. · doi:10.1109/iemdc.2003.1211284 · Cited by 395
Fault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376 · cited 1×
“In [ 77 ], Mecrow et al. examined the use of PM machine drives in high-performance safety-critical applications.”
BackgroundRotor loss in permanent-magnet brushless AC machines
Stone, D. A., Mellor, P. H., Howe, D., & Atallah, K. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.887213 · Cited by 326
Schiferl, R. F., & Lipo, T. A. (1990) · IEEE Transactions on Industry Applications · doi:10.1109/28.52682 · Cited by 318
Schiferl, R., & Lipo, T. A. (2003) · Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1988.25037 · Cited by 311
Rotor loss in permanent magnet brushless AC machines
Atallah, K., Howe, D., Mellor, P. H., & Stone, D. A. (2003) · IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272) · doi:10.1109/iemdc.1999.769027 · Cited by 308
Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor
Bianchi, N., Bolognani, S., & Dai Pre, M. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900445 · Cited by 276
Use of the star of slots in designing fractional-slot single-layer synchronous motors
Bianchi, N., & Dai Pré, M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050284 · Cited by 263
Design and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump
Mecrow, B. C., Jack, A. G., Atkinson, D. J., Green, S. R., Atkinson, G. J., King, A., & Green, B. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.832074 · Cited by 252
An Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults
Dwari, S., & Parsa, L. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.920643 · Cited by 244
Comparison of PM brushless motors, having either all teeth or alternate teeth wound
Ishak, D., Zhu, Z. Q., & Howe, D. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.853765 · Cited by 231
Parasitic Effects in PM Machines With Concentrated Windings
Magnussen, F., & Lendenmann, H. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.904400 · Cited by 204
Permanent-Magnet Brushless Machines With Unequal Tooth Widths and Similar Slot and Pole Numbers
Ishak, D., Zhu, Z. Q., & Howe, D. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.844380 · Cited by 195
Flux-Switching Motors for Automotive Applications
Pollock, C., Pollock, H., Barron, R., Coles, J. R., Moule, D., Court, A., & Sutton, R. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880842 · Cited by 163
Investigation on Pole-Slot Combinations for Permament Magnet Machines with Concentrated Windings
Libert, F., & Soulard, J. (2004) · International Conference on Electrical Machines (ICEM) · Cited by 157
Torque-ripple minimization in modular permanent-magnet brushless machines
Atallah, K., Wang, J., & Howe, D. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.818986 · Cited by 147
The Analysis of Losses in High-Power Fault-Tolerant Machines for Aerospace Applications
Atkinson, G. J., Mecrow, B. C., Jack, A. G., Atkinson, D. J., Sangha, P., & Benarous, M. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880869 · Cited by 145
Impact of Stator Winding of a Five-Phase Permanent-Magnet Motor on Postfault Operations
Bianchi, N., Bolognani, S., & Pré, M. D. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.920645 · Cited by 121
A study on eddy-current losses in rotors of surface permanent-magnet synchronous machines
Nakano, M., Kometani, H., & Kawamura, M. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.870037 · Cited by 117
Magnussen, F. (2004) · IET International Conference on Power Electronics, Machines and Drives (PEMD) · doi:10.1049/cp:20040370 · Cited by 112
Winding Inductances of Fractional Slot Surface-Mounted Permanent Magnet Brushless Machines
EL-Refaie, A. M., Zhu, Z. Q., Jahns, T. M., & Howe, D. (2008) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/08ias.2008.61 · Cited by 112
Self-citationOperation of a fault tolerant PM drive for an aerospace fuel pump application
Haylock, J. A. (1997) · doi:10.1049/cp:19971053 · Cited by 102
Operation of a fault tolerant PM drivefor an aerospace fuel pump application
Haylock, J. A., Mecrow, B. C., Jack, A. G., & Atkinson, D. J. (1998) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19982164 · Cited by 95
Favourable slot and pole number combinations for fault-tolerant PM machines
Mitcham, A. J., Antonopoulos, G., & Cullen, J. J. A. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040584 · Cited by 87
Effect of optimal torque control on rotor loss of fault-tolerant permanent-magnet brushless machines
Ede, J. D., Atallah, K., Wang, J., & Howe, D. (2002) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2002.802294 · Cited by 65
Performance of halbach magnetized brushless ac motors
Zhu, Z. Q., Xia, Z. P., Shi, Y. F., Howe, D., Pride, A., & Chen, X. J. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.816717 · Cited by 44
Chai, J., Wang, J., Atallah, K., & Howe, D. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.91 · Cited by 33
Fault detection of a five-phase Permanent-Magnet machine
Bianchini, C., Fornasiero, E., Matzen, T. N., Bianchi, N., & Bellini, A. (2008) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2008.4758125 · Cited by 31
Effect of axial segmentation of permanent magnets on rotor loss of modular brushless machines
Ede, J. D., Atallah, K., Jewell, G. W., Wang, J., & Howe, D. (2004) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2004.1348700 · Cited by 26
Shah, M. R., & EL-Refaie, A. M. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.88 · Cited by 21
Self-citationEffect of Number of Phases on Losses in Conducting Sleeves of High Speed Surface PM Machine Rotors
EL-Refaie, A. M., Shah, M. R., Qu, R., & Kern, J. M. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.236 · Cited by 14
Self-citation
Cited by
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165453 · Cited by 1,026
Advanced High-Power-Density Interior Permanent Magnet Motor for Traction Applications
EL-Refaie, A. M., Alexander, J. P., Galioto, S., Reddy, P. B., Huh, K.-K., de Bock, P., & Shen, X. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2305804 · Cited by 285
Self-citationEbrahimi, B. M., Javan Roshtkhari, M., Faiz, J., & Khatami, S. V. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2263777 · Cited by 271
Metwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229
“The FSCWhelps reduce end turn length, simplifies manufacturing and enables a slot fill factor approximately equal to 78%, especially when coupled with segmented stator structures [24].”
BackgroundSarikhani, A., & Mohammed, O. A. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2222857 · Cited by 177
Metadata
- Authors
- EL-Refaie, A. M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-01
- Volume
- 57
- Issue
- 1
- Pages
- 107-121
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2116106164
- Cited by
- 1,373
- References
- 34
- FWCI
- 36.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.