The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Open accessAbstract
This paper gives a comprehensive overview on disturbance/uncertainty estimation and attenuation (DUEA) techniques in permanent-magnet synchronous motor (PMSM) drives. Various disturbances and uncertainties in PMSM and also other alternating current (ac) motor drives are first reviewed which shows they have different behaviors and appear in different control loops of the system. The existing DUEA and other relevant control methods in handling disturbances and uncertainties widely used in PMSM drives, and their latest developments are then discussed and summarized. It also provides in-depth analysis of the relationship between these advanced control methods in the context of PMSM systems. When dealing with uncertainties, it is shown that DUEA has a different but complementary mechanism to widely used robust control and adaptive control. The similarities and differences in disturbance attenuation of DUEA and other promising methods such as internal model control and output regulation theory have been analyzed in detail. The wide applications of these methods in different ac motor drives (in particular in PMSM drives) are categorized and summarized. Finally, the paper ends with the discussion on future directions in this area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803 · cited 15×
“Both DOBC and ADRC mentioned earlier belong to the category of DUEA.”
BackgroundMethodInfluentialHigher-order sliding modes, differentiation and output-feedback control
Levant, A. (2003) · International Journal of Control · doi:10.1080/0020717031000099029 · Cited by 3,864
Zhou, K. (1998) · Cited by 3,824
Disturbance-Observer-Based Control and Related Methods—An Overview
Chen, W.-H., Yang, J., Guo, L., & Li, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2478397 · Cited by 2,985
Self-citationThe internal model principle of control theory
Francis, B. A., & Wonham, W. M. (1976) · Automatica · doi:10.1016/0005-1098(76)90006-6 · Cited by 2,874
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
A nonlinear disturbance observer for robotic manipulators
Chen, W.-H., Ballance, D. J., Gawthrop, P. J., & O'Reilly, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857974 · Cited by 1,752
Self-citationFriction Models and Friction Compensation
Olsson, H., Åström, K. J., Canudas de Wit, C., Gäfvert, M., & Lischinsky, P. (1998) · European Journal of Control · doi:10.1016/s0947-3580(98)70113-x · Cited by 1,581
Output regulation of nonlinear systems
Isidori, A., & Byrnes, C. I. (1990) · IEEE Transactions on Automatic Control · doi:10.1109/9.45168 · Cited by 1,575
Internal model control. A unifying review and some new results
Garcia, C. E., & Morari, M. (1982) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200017a016 · Cited by 1,534
Disturbance Observer Based Control for Nonlinear Systems
Chen, W.-H. (2004) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2004.839034 · Cited by 1,452
Self-citationNonlinear Output Regulation: Theory and Applications
Huang, J. (2004) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9780898718683 · Cited by 1,425
Active disturbance rejection control: Methodology and theoretical analysis
Huang, Y., & Xue, W. (2014) · ISA Transactions · doi:10.1016/j.isatra.2014.03.003 · Cited by 892
Disturbance Observer-Based Control: Methods and Applications
Li, S., Yang, J. T., Chen, W., & Chen, X. (2014) · Cited by 840
Self-citationSpeed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
Liu, H., & Li, S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2162217 · Cited by 774
Self-citationZhang, X., Sun, L., Zhao, K., & Sun, L. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2206610 · Cited by 725
Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia
Li, S., & Liu, Z. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024655 · Cited by 676
Self-citationMicroprocessor-Controlled DC Motor for Load-Insensitive Position Servo System
Ohishi, K., Nakao, M., Ohnishi, K., & Miyachi, K. (1987) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1987.350923 · Cited by 614
Improving Disturbance-Rejection Performance Based on an Equivalent-Input-Disturbance Approach
She, J.-H., Fang, M., Ohyama, Y., Hashimoto, H., & Wu, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.905976 · Cited by 579
Adaptive Prescribed Performance Motion Control of Servo Mechanisms with Friction Compensation
Na, J., Chen, Q., Ren, X., & Guo, Y. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2240635 · Cited by 523
Design and Implementation of Terminal Sliding Mode Control Method for PMSM Speed Regulation System
Li, S., Zhou, M., & Yu, X. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2226896 · Cited by 505
Self-citationPower Electronics and Motor Drives Recent Progress and Perspective
Bose, B. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2002726 · Cited by 431
Dead Time Compensation Method for Voltage-Fed PWM Inverter
Hwang, S.-H., & Kim, J.-M. (2010) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2031811 · Cited by 332
Mohamed, Y. A.-R. I. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895074 · Cited by 324
Fuzzy Adaptive Internal Model Control Schemes for PMSM Speed-Regulation System
Li, S., & Gu, H. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2205581 · Cited by 265
Self-citationOptimal control of the linear regulator with constant disturbances
Johnson, C. (1968) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1968.1098947 · Cited by 260
Temperature effects on torque production and efficiency of PM motors using NdFeB magnets
Sebastian, T. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.370284 · Cited by 246
Adaptive Fuzzy Logic Control of Permanent Magnet Synchronous Machines With Nonlinear Friction
Chaoui, H., & Sicard, P. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2148678 · Cited by 240
Correcteurs proportionnels-intégraux généralisés
Fliess, M., Marquez, R., Delaleau, E., & Sira–Ramírez, H. (2002) · ESAIM: Control, Optimisation and Calculus of Variations · doi:10.1051/cocv:2002002 · Cited by 222
Design of UDE‐based controllers from their two‐degree‐of‐freedom nature
Zhong, Q., Kuperman, A., & Stobart, R. K. (2011) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.1674 · Cited by 203
Fuzzy Sliding Mode Speed Controller for PM Synchronous Motors With a Load Torque Observer
Leu, V. Q., Choi, H. H., & Jung, J.-W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2161488 · Cited by 200
Active Disturbance Rejection Control for a Flywheel Energy Storage System
Chang, X., Li, Y., Zhang, W., Wang, N., & Xue, W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336607 · Cited by 198
Errouissi, R., Ouhrouche, M., Chen, W., et al. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167109 · Cited by 164
Self-citationEl-Sousy, F. F. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2038331 · Cited by 143
On Low-Velocity Compensation of Brushless DC Servo in the Absence of Friction Model
Sun, M., Wang, Z., Wang, Y., & Chen, Z. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2208434 · Cited by 78
Inertia and Friction Estimation of a Velocity-Controlled Servo Using Position Measurements
Garrido, R. A., & Concha, A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2293692 · Cited by 60
Neural Active Disturbance Rejection Output Control of Multimotor Servomechanism
Sun, G., Ren, X., & Li, D. (2014) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2336595 · Cited by 59
Cited by
Sliding Mode Direct Yaw-Moment Control Design for In-Wheel Electric Vehicles
Ding, S., Liu, L., & Zheng, W. X. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2682024 · Cited by 414
He, H., Sun, F., Wang, Z., Lin, C., Zhang, C., Xiong, R., Deng, J., Zhu, X., Xie, P., Zhang, S., et al. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100020 · Cited by 334
Rafaq, M. S., & Jung, J.-W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2944413 · Cited by 266
Discrete-Time Repetitive Control-Based ADRC for Current Loop Disturbances Suppression of PMSM Drives
Tian, M., Wang, B., Yu, Y., Dong, Q., & Xu, D. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3107635 · Cited by 255
Yang, C., Song, B., Xie, Y., Zheng, S., & Tang, X. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3239609 · Cited by 37
Metadata
- Authors
- Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-04
- Volume
- 64
- Issue
- 4
- Pages
- 3273-3285
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2460221038
- Cited by
- 695
- References
- 37
- FWCI
- 23.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.