The DOI matches its Crossref record.
Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings
Abstract
Two cylindrically symmetric and complementary sputtering geometries, the post and hollow cathodes, were used to deposit thick (∼25-μ) coatings of various metals (Mo, Cr, Ti, Fe, Cu, and Al-alloy) onto glass and metallic substrates at deposition rates of 1000–2000 Å/min under various conditions of substrate temperature, argon pressure, and plasma bombardment. Coating surface topographies and fracture cross sections were examined by scanning electron microscopy. Polished cross sections were examined metallographically. Crystallographic orientations were determined by x-ray diffraction. Microstructures were generally consistent with the three-zone model proposed by Movchan and Demchishin [Fiz. Metal. Metalloved. 28, 653 (1969)]. Three differences were noted: (1) at low argon pressures a broad zone 1–zone 2 transition zone consisting of densely packed fibrous grains was identified; (2) zone 2 columnar grains tended to be faceted at elevated temperatures, although facets were often replaced by smooth flat surfaces at higher temperatures; (3) zone 3 equiaxed grains were generally not observed at the deposition conditions investigated. Hollow cathode deposition accentuated those features of coating growth that relate to intergrain shading.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Magnetron sputtering: a review of recent developments and applications
Kelly, P. J., & Arnell, R. D. (2000) · Vacuum · doi:10.1016/s0042-207x(99)00189-x · Cited by 2,136
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
Transparent conductors as solar energy materials: A panoramic review
Granqvist, C. G. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.04.031 · Cited by 1,566
A structure zone diagram including plasma-based deposition and ion etching
Anders, A. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2009.10.145 · Cited by 980
High power impulse magnetron sputtering discharge
Gudmundsson, J. T., Brenning, N., Lundin, D., & Helmersson, U. (2012) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.3691832 · Cited by 761
Perspectives on oblique angle deposition of thin films: From fundamentals to devices
Barranco, A., Borras, A., Gonzalez-Elipe, A. R., & Palmero, A. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.06.003 · Cited by 739
Intrinsic stress in sputter-deposited thin films
Windischmann, H. (1992) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408439208244586 · Cited by 662
Plasma deposition of optical films and coatings: A review
Martinu, L., & Poitras, D. (2000) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1314395 · Cited by 559
Biaxial alignment in sputter deposited thin films
Mahieu, S., Ghekiere, P., Depla, D., & De Gryse, R. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.06.027 · Cited by 456
Review of the fundamentals of thin-film growth
Kaiser, N. (2002) · Applied Optics · doi:10.1364/ao.41.003053 · Cited by 450
Oxide electrochromics: An introduction to devices and materials
Granqvist, C. G. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.021 · Cited by 440
Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)
Anders, A. (2017) · Journal of Applied Physics · doi:10.1063/1.4978350 · Cited by 424
Industrial applications of superhard nanocomposite coatings
Veprek, S., & Veprek-Heijman, M. J. G. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.05.038 · Cited by 420
Colloidal Synthesis of Hollow Cobalt Sulfide Nanocrystals
Yin, Y., Erdonmez, C. K., Cabot, A., Hughes, S., & Alivisatos, A. P. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600256 · Cited by 369
The energy balance at substrate surfaces during plasma processing
Kersten, H., Deutsch, H., Steffen, H., Kroesen, G. M. W., & Hippler, R. (2001) · Vacuum · doi:10.1016/s0042-207x(01)00350-5 · Cited by 368
Review Article: Tracing the recorded history of thin-film sputter deposition: From the 1800s to 2017
Greene, J. E. (2017) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4998940 · Cited by 343
Note on the origin of intrinsic stresses in films deposited via evaporation and sputtering
D'Heurle, F. M., & Harper, J. M. E. (1989) · Thin Solid Films · doi:10.1016/0040-6090(89)90035-7 · Cited by 298
Interface and Defects Engineering for Multilayer Laser Coatings
Dong, S., Jiao, H., Wang, Z., Zhang, J., & Cheng, X. (2022) · Progress in Surface Science · doi:10.1016/j.progsurf.2022.100663 · Cited by 30
Kim, S., In, J.-H., Kim, S. H., Han, K., Lim, D., Hwang, Y. S., Lee, K. M., & Choi, J. H. (2023) · Applied Sciences · doi:10.3390/app132413271 · Cited by 11
Preparation of Multi-Layered Tungsten-Carbon Films by Ion-Beam Sputtering
Takei, K., & Maeda, Y. (1985) · Japanese Journal of Applied Physics · doi:10.1143/jjap.24.1366 · Cited by 9
Metadata
- Authors
- Thornton, J. A.
- Venue
- Journal of Vacuum Science and Technology
- Publisher
- American Vacuum Society
- Published
- 1974-07-01
- Volume
- 11
- Issue
- 4
- Pages
- 666-670
- ISSN
- 0022-5355 (ISSN-L)
- OpenAlex
- W2040179900
- Cited by
- 2,421
- References
- 0
- FWCI
- 13.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.