The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Amine Scrubbing for CO 2 Capture
Abstract
Amine scrubbing has been used to separate carbon dioxide (CO 2 ) from natural gas and hydrogen since 1930. It is a robust technology and is ready to be tested and used on a larger scale for CO 2 capture from coal-fired power plants. The minimum work requirement to separate CO 2 from coal-fired flue gas and compress CO 2 to 150 bar is 0.11 megawatt-hours per metric ton of CO 2 . Process and solvent improvements should reduce the energy consumption to 0.2 megawatt-hour per ton of CO 2 . Other advanced technologies will not provide energy-efficient or timely solutions to CO 2 emission from conventional coal-fired power plants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An engineering and economic evaluation of CO2 removal from fossil-fuel-fired power plants
Booras, G. S., & Smelser, S. C. (1991) · Energy · doi:10.1016/0360-5442(91)90003-5 · Cited by 104
A commercial plant for removal of smoke and oxides of sulphur from flue gases
Nonhebel, G. (1936) · Transactions of the Faraday Society · doi:10.1039/tf9363201291 · Cited by 15
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Covalent Organic Frameworks: Design, Synthesis, and Functions
Geng, K., He, T., Liu, R., Dalapati, S., Tan, K. T., Li, Z., Tao, S., Gong, Y., Jiang, Q., & Jiang, D. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00550 · Cited by 4,064
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
“The amine absorption/stripping technology is an energy intensive process and the overall cost of a CO 2 capture process is 52–77 US$/tonne CO 2 (Rochelle, 2009).”
InfluentialCO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Energy-efficient polymeric gas separation membranes for a sustainable future: A review
Sanders, D. F., Smith, Z. P., Guo, R., Robeson, L. M., McGrath, J. E., Paul, D. R., & Freeman, B. D. (2013) · Polymer · doi:10.1016/j.polymer.2013.05.075 · Cited by 1,477
Covalent organic frameworks for separation applications
Wang, Z., Zhang, S., Chen, Y., Zhang, Z., & Ma, S. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00827f · Cited by 1,470
Biophysical and economic limits to negative CO2 emissions
Smith, P., Davis, S. J., Creutzig, F., Fuss, S., Minx, J., Gabrielle, B., Kato, E., Jackson, R. B., Cowie, A., Kriegler, E., et al. (2016) · Nature Climate Change · doi:10.1038/nclimate2870 · Cited by 1,440
The role of CO2 capture and utilization in mitigating climate change
Mac Dowell, N., Fennell, P. S., Shah, N., & Maitland, G. C. (2017) · Nature Climate Change · doi:10.1038/nclimate3231 · Cited by 1,321
McDonald, T. M., Lee, W. R., Mason, J. A., Wiers, B. M., Hong, C. S., & Long, J. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300034j · Cited by 1,289
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Covalent Organic Frameworks for CO2 Capture
Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,140
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Deep Eutectic Solvents: Physicochemical Properties and Gas Separation Applications
García, G., Aparicio, S., Ullah, R., & Atilhan, M. (2015) · Energy & Fuels · doi:10.1021/ef5028873 · Cited by 1,112
State-of-the-Art of CO2Capture with Ionic Liquids
Ramdin, M., de Loos, T. W., & Vlugt, T. J. H. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3003705 · Cited by 1,073
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Water splitting–biosynthetic system with CO 2 reduction efficiencies exceeding photosynthesis
Liu, C., Colón, B. C., Ziesack, M., Silver, P. A., & Nocera, D. G. (2016) · Science · doi:10.1126/science.aaf5039 · Cited by 971
Vaidhyanathan, R., Iremonger, S. S., Shimizu, G. K. H., Boyd, P. G., Alavi, S., & Woo, T. K. (2010) · Science · doi:10.1126/science.1194237 · Cited by 927
Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions
Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 875
Secondary building units as the turning point in the development of the reticular chemistry of MOFs
Kalmutzki, M. J., Hanikel, N., & Yaghi, O. M. (2018) · Science Advances · doi:10.1126/sciadv.aat9180 · Cited by 861
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
Gür, T. M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100965 · Cited by 821
Huang, N., Chen, X., Krishna, R., & Jiang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411262 · Cited by 762
Chemical Technologies for Exploiting and Recycling Carbon Dioxide into the Value Chain
Peters, M., Köhler, B., Kuckshinrichs, W., Leitner, W., Markewitz, P., & Müller, T. E. (2011) · ChemSusChem · doi:10.1002/cssc.201000447 · Cited by 738
A review on production of metal organic frameworks (MOF) for CO2 adsorption
Ghanbari, T., Abnisa, F., & Wan Daud, W. M. A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135090 · Cited by 723
Carbon Capture and Utilization Update
Al‐Mamoori, A., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2017) · Energy Technology · doi:10.1002/ente.201600747 · Cited by 719
Direct air capture: process technology, techno-economic and socio-political challenges
Erans, M., Sanz-Pérez, E. S., Hanak, D. P., Clulow, Z., Reiner, D. M., & Mutch, G. A. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03523a · Cited by 688
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Zhang, S., Zhang, J., Zhang, Y., & Deng, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00509 · Cited by 659
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Integrated CO2 capture, wastewater treatment and biofuel production by microalgae culturing—A review
Razzak, S. A., Hossain, M. M., Lucky, R. A., Bassi, A. S., & de Lasa, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.063 · Cited by 631
Porous materials with pre-designed single-molecule traps for CO2 selective adsorption
Li, J.-R., Yu, J., Lu, W., Sun, L.-B., Sculley, J., Balbuena, P. B., & Zhou, H.-C. (2013) · Nature Communications · doi:10.1038/ncomms2552 · Cited by 631
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
A systematic review on CO2 capture with ionic liquids: Current status and future prospects
Aghaie, M., Rezaei, N., & Zendehboudi, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.004 · Cited by 594
Microporous organic polymers for carbon dioxide capture
Dawson, R., Stöckel, E., Holst, J. R., Adams, D. J., & Cooper, A. I. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01971f · Cited by 590
Metal–Organic‐Framework‐Based Catalysts for Photoreduction of CO2
Li, R., Zhang, W., & Zhou, K. (2018) · Advanced Materials · doi:10.1002/adma.201705512 · Cited by 584
The outlook for improved carbon capture technology
Rubin, E. S., Mantripragada, H., Marks, A., Versteeg, P., & Kitchin, J. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.003 · Cited by 576
Chemical tuning of CO2 sorption in robust nanoporous organic polymers
Dawson, R., Adams, D. J., & Cooper, A. I. (2011) · Chemical Science · doi:10.1039/c1sc00100k · Cited by 568
In silico screening of carbon-capture materials
Lin, L.-C., Berger, A. H., Martin, R. L., Kim, J., Swisher, J. A., Jariwala, K., Rycroft, C. H., Bhown, A. S., Deem, M. W., Haranczyk, M., et al. (2012) · Nature Materials · doi:10.1038/nmat3336 · Cited by 563
Combination of ionic liquids with membrane technology: A new approach for CO2 separation
Dai, Z., Noble, R. D., Gin, D. L., Zhang, X., & Deng, L. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.08.060 · Cited by 559
Selectivity and direct visualization of carbon dioxide and sulfur dioxide in a decorated porous host
Yang, S., Sun, J., Ramirez-Cuesta, A. J., Callear, S. K., David, W. I. F., Anderson, D. P., Newby, R., Blake, A. J., Parker, J. E., Tang, C. C., et al. (2012) · Nature Chemistry · doi:10.1038/nchem.1457 · Cited by 554
Aqueous piperazine as the new standard for CO2 capture technology
Rochelle, G., Chen, E., Freeman, S., Van Wagener, D., Xu, Q., & Voice, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.011 · Cited by 549
Self-citationAdsorption of CO2 and CH4 on a magnesium-based metal organic framework
Bao, Z., Yu, L., Ren, Q., Lu, X., & Deng, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.09.065 · Cited by 527
Economic and energetic analysis of capturing CO 2 from ambient air
House, K. Z., Baclig, A. C., Ranjan, M., van Nierop, E. A., Wilcox, J., & Herzog, H. J. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1012253108 · Cited by 524
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Li, K., Leigh, W., Feron, P., Yu, H., & Tade, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.109 · Cited by 521
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
The role of metal–organic frameworks in a carbon-neutral energy cycle
Schoedel, A., Ji, Z., & Yaghi, O. M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.34 · Cited by 516
A Review of Post-combustion CO2 Capture Technologies from Coal-fired Power Plants
Wang, Y., Zhao, L., Otto, A., Robinius, M., & Stolten, D. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1209 · Cited by 515
Electrochemical carbon dioxide capture to close the carbon cycle
Sharifian, R., Wagterveld, R. M., Digdaya, I. A., Xiang, C., & Vermaas, D. A. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03382k · Cited by 514
CO2 Capture by Tertiary Amine Absorbents: A Performance Comparison Study
Chowdhury, F. A., Yamada, H., Higashii, T., Goto, K., & Onoda, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400825u · Cited by 498
Carbon Dioxide Capture Adsorbents: Chemistry and Methods
Patel, H. A., Byun, J., & Yavuz, C. T. (2017) · ChemSusChem · doi:10.1002/cssc.201601545 · Cited by 492
Li-CO2 Electrochemistry: A New Strategy for CO2 Fixation and Energy Storage
Qiao, Y., Yi, J., Wu, S., Liu, Y., Yang, S., He, P., & Zhou, H. (2017) · Joule · doi:10.1016/j.joule.2017.07.001 · Cited by 490
Olabi, A. G., Obaideen, K., Elsaid, K., Wilberforce, T., Sayed, E. T., Maghrabie, H. M., & Abdelkareem, M. A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111710 · Cited by 484
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Garg, S., Li, M., Weber, A. Z., Ge, L., Li, L., Rudolph, V., Wang, G., & Rufford, T. E. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta13298h · Cited by 478
Rabbani, M. G., & El-Kaderi, H. M. (2012) · Chemistry of Materials · doi:10.1021/cm300407h · Cited by 461
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Metal–organic frameworks for the chemical fixation of CO2 into cyclic carbonates
Pal, T. K., De, D., & Bharadwaj, P. K. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213173 · Cited by 458
Molecular Design of High Capacity, Low Viscosity, Chemically Tunable Ionic Liquids for CO2 Capture
Gurkan, B., Goodrich, B. F., Mindrup, E. M., Ficke, L. E., Massel, M., Seo, S., Senftle, T. P., Wu, H., Glaser, M. F., Shah, J. K., et al. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz101533k · Cited by 454
Cooperative carbon capture and steam regeneration with tetraamine-appended metal–organic frameworks
Kim, E. J., Siegelman, R. L., Jiang, H. Z. H., Forse, A. C., Lee, J.-H., Martell, J. D., Milner, P. J., Falkowski, J. M., Neaton, J. B., Reimer, J. A., et al. (2020) · Science · doi:10.1126/science.abb3976 · Cited by 446
Heterogeneous catalytic CO2 conversion to value-added hydrocarbons
Dorner, R. W., Hardy, D. R., Williams, F. W., & Willauer, H. D. (2010) · Energy & Environmental Science · doi:10.1039/c001514h · Cited by 445
Metal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage
Lin, Y., Kong, C., Zhang, Q., & Chen, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601296 · Cited by 443
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Ail, S. S., & Dasappa, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.143 · Cited by 436
Trends in CO2 conversion and utilization: A review from process systems perspective
Rafiee, A., Rajab Khalilpour, K., Milani, D., & Panahi, M. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.08.065 · Cited by 435
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
CO 2 capture from the industry sector
Bains, P., Psarras, P., & Wilcox, J. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.07.001 · Cited by 430
A comparative energy and costs assessment and optimization for direct air capture technologies
Sabatino, F., Grimm, A., Gallucci, F., van Sint Annaland, M., Kramer, G. J., & Gazzani, M. (2021) · Joule · doi:10.1016/j.joule.2021.05.023 · Cited by 429
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
“Compared to MEA, it shows fast kinetics in reaction with CO2, better chemical stability, and requires lower energy input for regeneration (Rochelle, 2009; Dugas and Rochelle, 2011).”
BackgroundInfluentialChina's carbon capture, utilization and storage (CCUS) policy: A critical review
Jiang, K., Ashworth, P., Zhang, S., Liang, X., Sun, Y., & Angus, D. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109601 · Cited by 422
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Low to near-zero CO2 production of hydrogen from fossil fuels: Status and perspectives
Muradov, N. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.04.101 · Cited by 419
Heldebrant, D. J., Koech, P. K., Glezakou, V.-A., Rousseau, R., Malhotra, D., & Cantu, D. C. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00768 · Cited by 416
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Sidhikku Kandath Valappil, R., Ghasem, N., & Al-Marzouqi, M. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.03.030 · Cited by 415
Carbon Dioxide Capture with Ionic Liquids and Deep Eutectic Solvents: A New Generation of Sorbents
Sarmad, S., Mikkola, J., & Ji, X. (2017) · ChemSusChem · doi:10.1002/cssc.201600987 · Cited by 406
The changing state of porous materials
Bennett, T. D., Coudert, F.-X., James, S. L., & Cooper, A. I. (2021) · Nature Materials · doi:10.1038/s41563-021-00957-w · Cited by 405
Phase change solvents for post-combustion CO2 capture: Principle, advances, and challenges
Zhang, S., Shen, Y., Wang, L., Chen, J., & Lu, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.242 · Cited by 404
Rabbani, M. G., & El-Kaderi, H. M. (2011) · Chemistry of Materials · doi:10.1021/cm200411p · Cited by 403
Carbon dioxide capture with concentrated, aqueous piperazine
Freeman, S. A., Dugas, R., Van Wagener, D. H., Nguyen, T., & Rochelle, G. T. (2010) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.10.008 · Cited by 401
Self-citationMason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
Lyu, H., Chen, O. I.-F., Hanikel, N., Hossain, M. I., Flaig, R. W., Pei, X., Amin, A., Doherty, M. D., Impastato, R. K., Glover, T. G., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c13368 · Cited by 369
Review on CO2 Capture Using Amine-Functionalized Materials
Hack, J., Maeda, N., & Meier, D. M. (2022) · ACS Omega · doi:10.1021/acsomega.2c03385 · Cited by 366
Lyndon, R., Konstas, K., Ladewig, B. P., Southon, P. D., Kepert, P. C. J., & Hill, M. R. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201206359 · Cited by 365
The Li–CO2 battery: a novel method for CO2 capture and utilization
Xu, S., Das, S. K., & Archer, L. A. (2013) · RSC Advances · doi:10.1039/c3ra40394g · Cited by 364
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Faradaic electro-swing reactive adsorption for CO2 capture
Voskian, S., & Hatton, T. A. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02412c · Cited by 358
The Chemistry of Porous Organic Molecular Materials
Little, M. A., & Cooper, A. I. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909842 · Cited by 357
Recent advances in carbon dioxide capture with metal‐organic frameworks
Liu, Y., Wang, Z. U., & Zhou, H. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1296 · Cited by 357
O’Brien, C. P., Miao, R. K., Shayesteh Zeraati, A., Lee, G., Sargent, E. H., & Sinton, D. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00206 · Cited by 356
Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework
Qazvini, O. T., Babarao, R., & Telfer, S. G. (2021) · Nature Communications · doi:10.1038/s41467-020-20489-2 · Cited by 350
Ahmed, R., Liu, G., Yousaf, B., Abbas, Q., Ullah, H., & Ali, M. U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118409 · Cited by 349
Metadata
- Authors
- Rochelle, G. T.
- Venue
- Science
- Published
- 2009-09-25
- Volume
- 325
- Issue
- 5948
- Pages
- 1652-1654
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2076949647
- Cited by
- 4,440
- References
- 2
- FWCI
- 202.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.