Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Unrestricted Travel in Solar Cells: In the past 2 years, organolead halide perovskites have emerged as a promising class of light-harvesting media in experimental solar cells, but the physical basis for their efficiency has been unclear (see the Perspective by Hodes ). Two studies now show, using a variety of time-resolved absorption and emission spectroscopic techniques, that these materials manifest relatively long diffusion paths for charge carriers energized by light absorption. Xing et al. (p. 344 ) independently assessed (negative) electron and (positive) hole diffusion lengths and found them well-matched to one another to the ~100-nanometer optical absorption depth. Stranks et al. (p. 341 ) uncovered a 10-fold greater diffusion length in a chloride-doped material, which correlates with the material's particularly efficient overall performance. Both studies highlight effective carrier diffusion as a fruitful parameter for further optimization.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Their superior optoelectronic and electronic properties, including exceptional light absorption efficiency, high carrier mobility, and good conductivity, empower these sensors with unparalleled sensitivity and ultrafast response times, even under challenging conditions such as low light or weak signals [17][18][19].”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [17]
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Principles of Fluorescence Spectroscopy
(2006) · Springer eBooks · doi:10.1007/978-0-387-46312-4 · Cited by 19,339
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationYu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Self-citationNoh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Cited by
Items 401–500 of 1,045
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Tailoring passivators for highly efficient and stable perovskite solar cells
Zhang, H., Pfeifer, L., Zakeeruddin, S. M., Chu, J., & Grätzel, M. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00510-0 · Cited by 386
Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI 3
Ke, W., Stoumpos, C. C., Zhu, M., Mao, L., Spanopoulos, I., Liu, J., Kontsevoi, O. Y., Chen, M., Sarma, D., Zhang, Y., et al. (2017) · Science Advances · doi:10.1126/sciadv.1701293 · Cited by 414
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Perovskite Solar Cells for Space Applications: Progress and Challenges
Tu, Y., Wu, J., Xu, G., Yang, X., Cai, R., Gong, Q., Zhu, R., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202006545 · Cited by 404
Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells
Ke, W., Fang, G., Wan, J., Tao, H., Liu, Q., Xiong, L., Qin, P., Wang, J., Lei, H., Yang, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7700 · Cited by 420
Colloidal Organohalide Perovskite Nanoplatelets Exhibiting Quantum Confinement
Tyagi, P., Arveson, S. M., & Tisdale, W. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00664 · Cited by 416
Two-Dimensional CH3NH3PbI3 Perovskite: Synthesis and Optoelectronic Application
Liu, J., Xue, Y., Wang, Z., Xu, Z.-Q., Zheng, C., Weber, B., Song, J., Wang, Y., Lu, Y., Zhang, Y., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b07791 · Cited by 416
Fu, Y., Meng, F., Rowley, M. B., Thompson, B. J., Shearer, M. J., Ma, D., Hamers, R. J., Wright, J. C., & Jin, S. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02651 · Cited by 418
Tracking Iodide and Bromide Ion Segregation in Mixed Halide Lead Perovskites during Photoirradiation
Yoon, S. J., Draguta, S., Manser, J. S., Sharia, O., Schneider, W. F., Kuno, M., & Kamat, P. V. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00158 · Cited by 419
Point defect engineering in thin-film solar cells
Park, J. S., Kim, S., Xie, Z., & Walsh, A. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0026-7 · Cited by 411
McCall, K. M., Morad, V., Benin, B. M., & Kovalenko, M. V. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00211 · Cited by 416
Xu, B., Sheibani, E., Liu, P., Zhang, J., Tian, H., Vlachopoulos, N., Boschloo, G., Kloo, L., Hagfeldt, A., & Sun, L. (2014) · Advanced Materials · doi:10.1002/adma.201402415 · Cited by 414
Noel, N. K., Habisreutinger, S. N., Wenger, B., Klug, M. T., Hörantner, M. T., Johnston, M. B., Nicholas, R. J., Moore, D. T., & Snaith, H. J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02373h · Cited by 413
Self-citationFedorovskiy, A. E., Drigo, N. A., & Nazeeruddin, M. K. (2020) · Small Methods · doi:10.1002/smtd.201900426 · Cited by 408
Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells
Cai, Y., Cui, J., Chen, M., Zhang, M., Han, Y., Qian, F., Zhao, H., Yang, S., Yang, Z., Bian, H., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005776 · Cited by 417
Ha, S. T., Liu, X., Zhang, Q., Giovanni, D., Sum, T. C., & Xiong, Q. (2014) · Advanced Optical Materials · doi:10.1002/adom.201400106 · Cited by 419
Stolterfoht, M., Wolff, C. M., Amir, Y., Paulke, A., Perdigón-Toro, L., Caprioglio, P., & Neher, D. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00899f · Cited by 415
Hao, F., Stoumpos, C. C., Liu, Z., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509245x · Cited by 413
Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites
Dar, M. I., Jacopin, G., Meloni, S., Mattoni, A., Arora, N., Boziki, A., Zakeeruddin, S. M., Rothlisberger, U., & Grätzel, M. (2016) · Science Advances · doi:10.1126/sciadv.1601156 · Cited by 412
Zhang, Y., Liu, M., Eperon, G. E., Leijtens, T. C., McMeekin, D., Saliba, M., Zhang, W., de Bastiani, M., Petrozza, A., Herz, L. M., et al. (2015) · Materials Horizons · doi:10.1039/c4mh00238e · Cited by 414
Self-citationLiu, Y., Sun, J., Yang, Z., Yang, D., Ren, X., Xu, H., Yang, Z., & Liu, S. (. (2016) · Advanced Optical Materials · doi:10.1002/adom.201600327 · Cited by 412
Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals
Abdelhady, A. L., Saidaminov, M. I., Murali, B., Adinolfi, V., Voznyy, O., Katsiev, K., Alarousu, E., Comin, R., Dursun, I., Sinatra, L., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02681 · Cited by 409
Graphene and its derivatives for solar cells application
Mahmoudi, T., Wang, Y., & Hahn, Y.-B. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.047 · Cited by 404
Yu, Z., Li, F., & Sun, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03565h · Cited by 404
Perovskite Crystals for Tunable White Light Emission
Pathak, S., Sakai, N., Wisnivesky Rocca Rivarola, F., Stranks, S. D., Liu, J., Eperon, G. E., Ducati, C., Wojciechowski, K., Griffiths, J. T., Haghighirad, A. A., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03769 · Cited by 409
Self-citationXiong, S., Hou, Z., Zou, S., Lu, X., Yang, J., Hao, T., Zhou, Z., Xu, J., Zeng, Y., Xiao, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.009 · Cited by 402
Shirayama, M., Kadowaki, H., Miyadera, T., Sugita, T., Tamakoshi, M., Kato, M., Fujiseki, T., Murata, D., Hara, S., Murakami, T. N., et al. (2016) · Physical Review Applied · doi:10.1103/physrevapplied.5.014012 · Cited by 400
Interface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802509 · Cited by 404
Interfacial Dipole in Organic and Perovskite Solar Cells
Chen, Q., Wang, C., Li, Y., & Chen, L. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c07439 · Cited by 397
Feng, J. (2014) · APL MATERIALS · doi:10.1063/1.4885256 · Cited by 395
Ye, S., Rao, H., Zhao, Z., Zhang, L., Bao, H., Sun, W., Li, Y., Gu, F., Wang, J., Liu, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01439 · Cited by 401
Wu, T., Wang, Y., Li, X., Wu, Y., Meng, X., Cui, D., Yang, X., & Han, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803766 · Cited by 382
Liu, M., Bi, L., Jiang, W., Zeng, Z., Tsang, S., Lin, F. R., & Jen, A. K. ‐. (2023) · Advanced Materials · doi:10.1002/adma.202304415 · Cited by 378
Optical phonons in methylammonium lead halide perovskites and implications for charge transport
Sendner, M., Nayak, P. K., Egger, D. A., Beck, S., Müller, C., Epding, B., Kowalsky, W., Kronik, L., Snaith, H. J., Pucci, A., et al. (2016) · Materials Horizons · doi:10.1039/c6mh00275g · Cited by 403
Self-citationIbn-Mohammed, T., Koh, S. C. L., Reaney, I. M., Acquaye, A., Schileo, G., Mustapha, K. B., & Greenough, R. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.095 · Cited by 379
Enabling Silicon for Solar-Fuel Production
Sun, K., Shen, S., Liang, Y., Burrows, P. E., Mao, S. S., & Wang, D. (2014) · Chemical Reviews · doi:10.1021/cr300459q · Cited by 393
Interfaces in Perovskite Solar Cells
Shi, J., Xu, X., Li, D., & Meng, Q. (2015) · Small · doi:10.1002/smll.201403534 · Cited by 395
Li, W., Fan, J., Li, J., Mai, Y., & Wang, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06444 · Cited by 398
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
Effect of CH3NH3PbI3thickness on device efficiency in planar heterojunction perovskite solar cells
Liu, D., Gangishetty, M. K., & Kelly, T. L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02637c · Cited by 393
Tavakoli, M. M., Tsui, K.-H., Zhang, Q., He, J., Yao, Y., Li, D., & Fan, Z. (2015) · ACS Nano · doi:10.1021/acsnano.5b04284 · Cited by 393
Agarwala, P., & Kabra, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08449d · Cited by 384
On the Origin of the Ideality Factor in Perovskite Solar Cells
Caprioglio, P., Wolff, C. M., Sandberg, O. J., Armin, A., Rech, B., Albrecht, S., Neher, D., & Stolterfoht, M. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000502 · Cited by 377
Formation of Surface Defects Dominates Ion Migration in Lead-Halide Perovskites
Meggiolaro, D., Mosconi, E., & De Angelis, F. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00247 · Cited by 386
Ultra-thin high efficiency semitransparent perovskite solar cells
Della Gaspera, E., Peng, Y., Hou, Q., Spiccia, L., Bach, U., Jasieniak, J. J., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.028 · Cited by 390
Vegetable-based dye-sensitized solar cells
Calogero, G., Bartolotta, A., Di Marco, G., Di Carlo, A., & Bonaccorso, F. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00309h · Cited by 384
Long, R., Liu, J., & Prezhdo, O. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00645 · Cited by 395
Chen, H., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201603994 · Cited by 384
Shift current bulk photovoltaic effect in polar materials—hybrid and oxide perovskites and beyond
Tan, L. Z., Zheng, F., Young, S. M., Wang, F., Liu, S., & Rappe, A. M. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2016.26 · Cited by 393
High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer
Zhao, D., Sexton, M., Park, H., Baure, G., Nino, J. C., & So, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401855 · Cited by 380
Schloemer, T. H., Christians, J. A., Luther, J. M., & Sellinger, A. (2019) · Chemical Science · doi:10.1039/c8sc05284k · Cited by 384
Humidity‐Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells
Yun, J. S., Kim, J., Young, T., Patterson, R. J., Kim, D., Seidel, J., Lim, S., Green, M. A., Huang, S., & Ho‐Baillie, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705363 · Cited by 382
Yin, X., Song, Z., Li, Z., & Tang, W. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02337j · Cited by 388
Photophysics of Organic–Inorganic Hybrid Lead Iodide Perovskite Single Crystals
Fang, H., Raissa, R., Abdu‐Aguye, M., Adjokatse, S., Blake, G. R., Even, J., & Loi, M. A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404421 · Cited by 383
Metal Halide Perovskites for Laser Applications
Lei, L., Dong, Q., Gundogdu, K., & So, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010144 · Cited by 378
Yamada, Y., Yamada, T., Phuong, L. Q., Maruyama, N., Nishimura, H., Wakamiya, A., Murata, Y., & Kanemitsu, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04503 · Cited by 383
Highly Stable and Efficient FASnI3‐Based Perovskite Solar Cells by Introducing Hydrogen Bonding
Meng, X., Lin, J., Liu, X., He, X., Wang, Y., Noda, T., Wu, T., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201903721 · Cited by 386
Role of Chloride in the Morphological Evolution of Organo-Lead Halide Perovskite Thin Films
Williams, S. T., Zuo, F., Chueh, C.-C., Liao, C.-Y., Liang, P.-W., & Jen, A. K.-Y. (2014) · ACS Nano · doi:10.1021/nn5041922 · Cited by 385
Gao, L., Zeng, K., Guo, J., Ge, C., Du, J., Zhao, Y., Chen, C., Deng, H., He, Y., Song, H., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03119 · Cited by 389
Zheng, X., Deng, Y., Chen, B., Wei, H., Xiao, X., Fang, Y., Lin, Y., Yu, Z., Liu, Y., Wang, Q., et al. (2018) · Advanced Materials · doi:10.1002/adma.201803428 · Cited by 386
Termination Dependence of Tetragonal CH3NH3PbI3 Surfaces for Perovskite Solar Cells
Haruyama, J., Sodeyama, K., Han, L., & Tateyama, Y. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501510v · Cited by 380
Shift Happens. How Halide Ion Defects Influence Photoinduced Segregation in Mixed Halide Perovskites
Yoon, S. J., Kuno, M., & Kamat, P. V. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00357 · Cited by 380
Zhao, T., Chueh, C.-C., Chen, Q., Rajagopal, A., & Jen, A. K.-Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00327 · Cited by 383
Solvent Engineering for Ambient-Air-Processed, Phase-Stable CsPbI3 in Perovskite Solar Cells
Luo, P., Xia, W., Zhou, S., Sun, L., Cheng, J., Xu, C., & Lu, Y. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01576 · Cited by 384
Highly Efficient Thermally Co-evaporated Perovskite Solar Cells and Mini-modules
Li, J., Wang, H., Chin, X. Y., Dewi, H. A., Vergeer, K., Goh, T. W., Lim, J. W. M., Lew, J. H., Loh, K. P., Soci, C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.03.005 · Cited by 378
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Zuo, C., & Ding, L. (2014) · Nanoscale · doi:10.1039/c4nr02425g · Cited by 385
Two‐Dimensional Materials for Halide Perovskite‐Based Optoelectronic Devices
Chen, S., & Shi, G. (2017) · Advanced Materials · doi:10.1002/adma.201605448 · Cited by 380
Capturing the Sun: A Review of the Challenges and Perspectives of Perovskite Solar Cells
Petrus, M. L., Schlipf, J., Li, C., Gujar, T. P., Giesbrecht, N., Müller‐Buschbaum, P., Thelakkat, M., Bein, T., Hüttner, S., & Docampo, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700264 · Cited by 374
Seo, S., Park, I. J., Kim, M., Lee, S., Bae, C., Jung, H. S., Park, N.-G., Kim, J. Y., & Shin, H. (2016) · Nanoscale · doi:10.1039/c6nr01601d · Cited by 380
Malgras, V., Tominaka, S., Ryan, J. W., Henzie, J., Takei, T., Ohara, K., & Yamauchi, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05608 · Cited by 380
Efficient Blue and White Perovskite Light-Emitting Diodes via Manganese Doping
Hou, S., Gangishetty, M. K., Quan, Q., & Congreve, D. N. (2018) · Joule · doi:10.1016/j.joule.2018.08.005 · Cited by 382
Perovskite‐Based Phototransistors and Hybrid Photodetectors
Xie, C., Liu, C., Loi, H., & Yan, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903907 · Cited by 376
Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor
Wu, Z., Bai, S., Xiang, J., Yuan, Z., Yang, Y., Cui, W., Gao, X., Liu, Z., Jin, Y., & Sun, B. (2014) · Nanoscale · doi:10.1039/c4nr03181d · Cited by 378
Facet-dependent photovoltaic efficiency variations in single grains of hybrid halide perovskite
Leblebici, S. Y., Leppert, L., Li, Y., Reyes-Lillo, S. E., Wickenburg, S., Wong, E., Lee, J., Melli, M., Ziegler, D., Angell, D. K., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.93 · Cited by 374
Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells
Hossain, M. I., Alharbi, F. H., & Tabet, N. (2015) · Solar Energy · doi:10.1016/j.solener.2015.07.040 · Cited by 377
Fang, H.-H., Adjokatse, S., Wei, H., Yang, J., Blake, G. R., Huang, J., Even, J., & Loi, M. A. (2016) · Science Advances · doi:10.1126/sciadv.1600534 · Cited by 369
Halide-Dependent Electronic Structure of Organolead Perovskite Materials
Buin, A., Comin, R., Xu, J., Ip, A. H., & Sargent, E. H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01909 · Cited by 375
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Inorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Bao, C., Chen, Z., Fang, Y., Wei, H., Deng, Y., Xiao, X., Li, L., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201703209 · Cited by 373
Methylammonium Bismuth Iodide as a Lead‐Free, Stable Hybrid Organic–Inorganic Solar Absorber
Hoye, R. L. Z., Brandt, R. E., Osherov, A., Stevanović, V., Stranks, S. D., Wilson, M. W. B., Kim, H., Akey, A. J., Perkins, J. D., Kurchin, R. C., et al. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201505055 · Cited by 368
Self-citationYuan, Y., Wang, Q., Shao, Y., Lu, H., Li, T., Gruverman, A., & Huang, J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501803 · Cited by 372
Organic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Synthesis and Properties of a Lead-Free Hybrid Double Perovskite: (CH3NH3)2AgBiBr6
Wei, F., Deng, Z., Sun, S., Zhang, F., Evans, D. M., Kieslich, G., Tominaka, S., Carpenter, M. A., Zhang, J., Bristowe, P. D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03944 · Cited by 364
Tian, Y., Peter, M., Unger, E., Abdellah, M., Zheng, K., Pullerits, T., Yartsev, A., Sundström, V., & Scheblykin, I. G. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp04410c · Cited by 372
Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell
Bergmann, V. W., Weber, S. A. L., Javier Ramos, F., Nazeeruddin, M. K., Grätzel, M., Li, D., Domanski, A. L., Lieberwirth, I., Ahmad, S., & Berger, R. (2014) · Nature Communications · doi:10.1038/ncomms6001 · Cited by 369
Hoffman, J. B., Schleper, A. L., & Kamat, P. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04661 · Cited by 371
Li, T., Pan, Y., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01798g · Cited by 370
Guo, Z., Manser, J. S., Wan, Y., Kamat, P. V., & Huang, L. (2015) · Nature Communications · doi:10.1038/ncomms8471 · Cited by 369
Bai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Lin, H., Yang, Y., & Yang, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701038 · Cited by 369
Edri, E., Kirmayer, S., Kulbak, M., Hodes, G., & Cahen, D. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz402706q · Cited by 371
Stable Low‐Bandgap Pb–Sn Binary Perovskites for Tandem Solar Cells
Yang, Z., Rajagopal, A., Chueh, C., Jo, S. B., Liu, B., Zhao, T., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201602696 · Cited by 367
Homogeneous Emission Line Broadening in the Organo Lead Halide Perovskite CH3NH3PbI3–xClx
Wehrenfennig, C., Liu, M., Snaith, H. J., Johnston, M. B., & Herz, L. M. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500434p · Cited by 364
Self-citationDu, M.-H. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00199 · Cited by 363
Controllable Perovskite Crystallization by Water Additive for High‐Performance Solar Cells
Gong, X., Li, M., Shi, X., Ma, H., Wang, Z., & Liao, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503559 · Cited by 366
Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells
Liu, Z., Krückemeier, L., Krogmeier, B., Klingebiel, B., Márquez, J. A., Levcenko, S., Öz, S., Mathur, S., Rau, U., Unold, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01906 · Cited by 365
Solution‐Grown Monocrystalline Hybrid Perovskite Films for Hole‐Transporter‐Free Solar Cells
Peng, W., Wang, L., Murali, B., Ho, K., Bera, A., Cho, N., Kang, C., Burlakov, V. M., Pan, J., Sinatra, L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506292 · Cited by 362
Strain effects on halide perovskite solar cells
Yang, B., Bogachuk, D., Suo, J., Wagner, L., Kim, H., Lim, J., Hinsch, A., Boschloo, G., Nazeeruddin, M. K., & Hagfeldt, A. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00278g · Cited by 358
Pérez-Osorio, M. A., Milot, R. L., Filip, M. R., Patel, J. B., Herz, L. M., Johnston, M. B., & Giustino, F. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b07432 · Cited by 360
Self-citation
Metadata
- Authors
- Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J.
- Affiliations
- University of Oxford (GB)
- Italian Institute of Technology (IT)
- Corresponding author
- Snaith, Henry J.
- ORCID
- Venue
- Science
- Published
- 2013-10-18
- Volume
- 342
- Issue
- 6156
- Pages
- 341-344
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2073726416
- Semantic Scholar
- f84ca57b651c85f23bbf9e7c8704051e961152ad
- Cited by
- 10,413
- References
- 27
- Citations by year
- 2026: 406 · 2025: 528 · 2024: 657 · 2023: 756 · 2022: 847 · 2021: 993 · 2020: 999 · 2019: 1079 · 2018: 1087 · 2017: 1047 · 2016: 939 · 2015: 686 · 2014: 367 · 2013: 18
- FWCI
- 401.99
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion)
- Funders
- Engineering and Physical Sciences Research Council (1511477, EP/H015701/1)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Keywords
- organic-inorganic hybrid perovskites, mixed-halide perovskites, methylammonium lead iodide, diffusion coefficient, carrier lifetime, planar heterojunction solar cells, transient absorption spectroscopy, photoluminescence quenching, perovskite absorbers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.