A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 2,101–2,200 of 2,542
Pao-la-or, P., & Somphong, N. (2020) · International Journal of Smart Grid and Clean Energy · doi:10.12720/sgce.9.5.915-923
“And the heat generation for the battery which was developed by reference [5-6] can be written as”
BackgroundZhang, Y., Liu, G., & Deng, D. (2021) · E3S Web of Conferences · doi:10.1051/e3sconf/202124801065
Eggenschwiler, P. D., Papetti, V., & Torre, A. D. (2021) · Proceedings · doi:10.1007/978-3-658-33466-6_44
Varyukhin, A. N., Zakharchenko, V. S., Osika, A. A., et al. (2021) · International Seminar on Electron Devices Design and Production (SED) · doi:10.1109/sed51197.2021.9444497
“Unfortunately, study [9] contains mathematical inaccuracies that complicate the application of the final mathematical relations.”
BackgroundInfluentialAnalysis of Heat Transfer Characteristics and Optimization of Cold Plate for Power Battery
Min, Z., Wang, J., Yu, Y., et al. (2021) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie45552.2021.9576222
“[14] Bernardi D, Pawlikowski E, Newman J.”
MethodThermoelectric Management of Lithium Ion Batteries in Mobile Devices
Radder, L. P., Allison, E. E., & Paquette, J. P. (2014)
1D Dynamic Thermal Model Development for a Battery Hybrid Thermal Management System
Gonzalez-Aguirre, E., Aranburu, I., Gastelurrutia, J., et al. (2021) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc53923.2021.9699281
A Scalable Dew-Point Evaporative Cooler for Battery Thermal ManagementPreprint
Lin, J., Chu, H. N., Thu, K., Wojtala, M., Gao, F., & Chua, K. J. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4067936
Luo, J., Gu, H., Wang, Y., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4067985
Simulation and Experimental Investigation of Battery TMSs
Dinçer, İ., Hamut, H. S., & Javani, N. (2016) · doi:10.1002/9781118900239.ch4
Levy, S., & Bro, P. (1994) · Springer eBooks · doi:10.1007/978-1-4899-1459-0_6
Piovano, A. A., Gautero, M., Scantamburlo, G., et al. (2022) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2022-37-0023
Cheng, J., Shuai, S., Tang, Z., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4137164
Dehghani, F., Eslamloueyan, R., & Sarshar, M. (2022) · Scientia Iranica · doi:10.24200/sci.2022.59292.6160 · Cited by 2
“Thermal model The most common equation that is used for calculating heat generation inside a battery during an electrochemical process is shown in Equation (1) [23]:”
MethodSirikasemsuk, S., Naphon, N., & Naphon, P. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4128750
Jin, B., Fei, Q., & Zou, W. (2022) · Asia-Pacific Conference on Image Processing, Electronics and Computers (IPEC) · doi:10.1145/3544109.3544188
“established by bernard [12] can be adopted for the battery heating rate:”
Backgroundzeng, J., Feng, S., Lai, C., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4196877
Modeling and Simulation Analysis of Electric Vehicle Battery Cooling SystemPreprint
Deng, B., Shangguan, W., Yin, Z., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4192596
Algorithms Analysis and Benefit Assessment Overview of Mobile Energy Storage Control System
Qingran-Wang (2022) · International Conference on Electrical Engineering and Mechatronics Technology (ICEEMT) · doi:10.1109/iceemt56362.2022.9862638
“The ampere integration method estimates the battery's capacity through the battery's charge and discharge and compensates based on the battery's temperature and charge-discharge efficiency tree [8] .”
MethodResearch on performance of thermal management system for lithium-ion power battery
Qiao, H., Wenfang, S., Zhang, W., et al. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2387/1/012031
“For the simulation calculation of heat generation in the battery, the Bernardi heat generation rate modelequation is commonly used in theory[19-20] , as shown in equation (5).”
MethodA Multi-objective Optimal Charging Strategy Based on Electro-thermal Coupling Model
Xu, Z., Zhao, G., Liu, X., et al. (2022) · CAA International Conference on Vehicular Control and Intelligence (CVCI) · doi:10.1109/cvci56766.2022.9964532
“Bernardi [8] has studied the heat generation mechanism inside the battery from an electrochemical perspective based on the first law of thermodynamics and has derived the following heat generation model.”
BackgroundThermal Energy Management in Hybrid and Electric Vehicles
Lemort, V., Olivier, G., & de Pelsemaeker, G. (2022) · doi:10.1002/9781119251767.ch4
Akkurt, N. (2022) · Mühendislik Bilimleri ve Tasarım Dergisi · doi:10.21923/jesd.1106646
Optimization of Airflow Channel with Metal Foam for Battery Thermal Management System
Fu, Z., & Chen, W. (2022) · International Conference on Power and Energy Applications (ICPEA) · doi:10.1109/icpea56363.2022.10052539
“Therefore, energy balance equation of Bernardi can be used to determine the heat generation status of the battery, and the formula is as follows [13]:”
MethodMachine Learning Methods for Temperature Prediction of Autonomous Underwater Vehicles’ Battery Pack
Li, B., Wang, M., Mao, Z., et al. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-0479-2_295
Comprehensive Analysis for Central Lithium-ion Batteries: Security Concerns and Recycle Strategies
Mo, F. (2023) · IEEE International Conference on Power, Electronics and Computer Applications (ICPECA) · doi:10.1109/icpeca56706.2023.10075880 · Cited by 2
Coşkun, T., & Çetkin, E. (2023) · Research on Engineering Structures and Materials · doi:10.17515/resm2022.585ma1121
Parametric Study on Water-Cooling Plates to Improve Cooling Performance on 18650 Li-Ion BatteryPreprint
Nanthatanti, R. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4455541
A Phase-Based Method for Estimating the Internal Temperature of Solid-State BatteryPreprint
Yang, R., Li, K., Xie, Y., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4478682
Ultra-Thin Vapor Chamber Based Heat Dissipation Technology for Lithium-Ion BatteryPreprint
Tang, Y. Z., Zhao, W., Li, H., Huang, H., Yin, S., Ji, W., & Zhang, S. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4478674
Li, D., Zhang, Z., Wang, Z., Liu, P., Li, X., & Deng, J. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4496452
Shen, K., Dai, J., Feng, X., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4501468
A Novel Battery Thermal Management System based on Capillary Driven Evaporative Cooling
Weragoda, D. M., Tian, G., & Cai, Q. (2023) · Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering · doi:10.11159/htff23.161
A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate
Suo, Y., Lai, G., & He, Z. (2023) · Journal of Energy Engineering · doi:10.1061/jleed9.eyeng-5007
Evaluation of heat generation and application in liquid cooling of Li-ion battery packs
Zhao, J., Feng, Z., Xu, Y., & Yuan, J. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-19017-9.00014-3
Stallard, S., & Li, X. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-19017-9.00017-9
Yao, F., chen, Q., Lin, L., & Guan, X. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4574096
Shen, X., Duan, Q., Qin, P., Tian, J., Wang, Q., & Sun, J. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4584050
Cooling Characteristic Analysis and Structure Optimization of Electric Vehicle Power Battery Pack
Xuxing, W., Jianglang, L., & Hao, D. (2023) · IEEE International Conference on Image Processing and Computer Applications (ICIPCA) · doi:10.1109/icipca59209.2023.10257932
Ultra-Thin Vapor Chamber Based Heat Dissipation Technology for Lithium-Ion BatteryPreprint
Zhao, W., Yin, S., Tang, Y. Z., Li, H., Huang, H., Ji, W., & Zhang, S. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4586370
Multiphysical Modeling and Simulation of Battery Cells and Systems Using Ansys MechanicalPreprint
Kießling, R. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4614641
Tang, Y., Guan, T., Yang, Z., et al. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.111885
Enhanced Model-Based Algorithm for Early Internal Short Circuit Detection in Lithium-Ion Batteries
Jia, Y., Brancato, L., Giglio, M., & Cadini, F. (2023) · PHM Society Asia-Pacific Conference · doi:10.36001/phmap.2023.v4i1.3623
Ultra-Thin Vapor Chamber Based Heat Dissipation Technology for Lithium-Ion BatteryPreprint
Zhao, W., Yin, S., Tang, Y. Z., Li, H., Huang, H., Ji, W., & Zhang, S. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4637707
Wang, B., Cao, W., Dong, T., Zhen, X., Liu, J., Sun, Y., & Zhou, L. (2023) · International Conference on Smart Grid and Smart Cities (ICSGSC) · doi:10.1109/icsgsc59580.2023.10319219
“In the paper, heat generation is calculated based on Bernardi's model [17] .”
MethodComputational Modelling on Lithium-Ion Battery Pack Forced Convection Cooling
Ghose, P., Nayak, S. K., Rana, B. K., et al. (2023) · Smart innovation, systems and technologies · doi:10.1007/978-981-99-6774-2_10
Zhang, W., Zhang, J., Zhang, G., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4648770
Yan, J., & Wan, Y. (2023) · Chinese Control and Decision Conference (CCDC) · doi:10.1109/ccdc58219.2023.10327389
“Lithium-ion batteries are sensitive to thermal effects and are always accompanied by super-potential heating, reversible entropy heating, phase change heating, hybrid heating, etc. during charging and discharging [2].”
BackgroundTwo-Level Optimization Strategy for Vehicle Speed and Battery Thermal in Connected and Automated EvsPreprint
Ma, Y., Ma, Q., Liu, Y., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4659553
Shen, X., Zhang, X., Chen, M., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4664008
Mathmatical Modeling of the Thermal Behavior of a Long Lithium-Ion Battery
Liu, Q., Gong, J., Wang, W., et al. (2023) · doi:10.1109/epee59859.2023.10351876
Shaosen, S., Midhun, M., Li, W., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110341
Li, K., Shi, L., Zhang, Y., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4705276
kumar, R., & Goel, V. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4753898
Thermoelectric coupling modeling of lithium-ion batteries operating under low-temperature domain
Chen, Z., Zhou, X., Wang, Y., et al. (2023) · China Automation Congress (CAC) · doi:10.1109/cac59555.2023.10451715
Numerical investigation of hybrid battery thermal management for high-voltage NMC 18650 battery pack
Thorat, P., Nawale, P., Chavan, S., et al. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19025-4.00010-5
Thermal Characteristics of Iron Phosphate Lithium Batteries Under High Rate Discharge
Leng, M., Liu, K., Gao, Y., et al. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-1420-9_21
Modeling and performance analysis of an integrated thermal management system for electric vehicle
Lin, C., Zhou, Q., Chen, M., Lu, Z., Xu, E., & Chen, Z.-T. (2024) · Other Conferences · doi:10.1117/12.3026155
“Currently, the most commonly used theory is developed by Bernardi [21], which is based on the uniform heating of internal materials in batteries and defined as: where q is the heat generation power of battery cell, I is the discharge current, R 0 is the internal resistance of battery cell, T∙d U0 /…”
MethodBidwaik, A. S., Nikam, S. R., & Bhusnoor, S. S. (2024) · Research Square · doi:10.2139/ssrn.4783289
Fiorillo, F., Idrissi, F. E., Ramesh, P., et al. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-01-2670
Topological Optimization Design of Cooling Channel for Liquid-Cooled Plate of Power Battery
Zhou, Q. H., Li, M., Li, Z., et al. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-01-2676
Yuan, X., Sun, Z., Su, C., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4800727
Xu, J., Xiong, K., Tang, T., Chen, Y., Hu, D., Hou, D., Yu, M., & Ding, J. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4803435
Research on Simulation Optimization of Side Cooling of an Energy Storage Battery ModulePreprint
Fang, H., Xu, J., Wang, M., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4813429
Xu, J., Xiong, K., Tang, T., Chen, Y., Hu, D., Hou, D., Yu, M., & Ding, J. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4815549
Huaxia, Y. A. N., Ma, X., Chen, Y., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4815432
An Integrated Battery Thermal Management System Coupling Immersion Preheating with Immersion CoolingPreprint
Luo, Y., Zhou, D., Zou, Z., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4815532
Huang, Y., Xu, Q., Li, L., Hang, W., Wang, W., Yin, M., Zheng, K., Wang, X., Wang, H., & Bei, S. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4816300
CAD Model Integration Within Multidisciplinary Modelling of Electric Vehicle Energy Storage System
Iannucci, L., Capasso, C., Vitolo, F., et al. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-58094-9_37
Xu, J., Xiong, K., Tang, T., Chen, Y., Hu, D., Hou, D., Yu, M., & Ding, J. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4824761
Optimization of Thermal Management Strategy for Lithium Battery Based on Fractal ChannelPreprint
chen, Q., Guan, X., Gu, Y., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4828687
Pan, X., sun, X., Shi, J., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4828690
Single-Phase Static Immersion-Cooled Battery Thermal Management System with Finned Heat PipesPreprint
Huang, H., Li, W., Xiong, S., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4829478
Torun, E., Buyruk, E., & Caner, M. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4834978
Huang, Y., Xu, Q., Li, L., Hang, W., Wang, W., Yin, M., Zheng, K., Wang, X., Wang, H., & Bei, S. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4838397
Design of Ctp Liquid Cooling Battery Pack and Thermal Characterization ExperimentsPreprint
Hongsong, Z., Wang, S., Liu, S., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4844488
Quantitative Measurement of Thermal Behaviors in a Cylindrical Lithium-Ion BatteryPreprint
Sheng, L., Zhu, Z., & Wang, X. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4849566
Kaushal, R., Gupta, R., & Gupta, A. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4860899
Tang, Z., Li, X., Dong, Y., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4865533
Tang, Z., Li, X., Dong, Y., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4866921
Pourfallah, M., & Languri, E. (2024) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2024.elc.050851
Yuan, X., Zheng, R., Yang, J., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4869160
Torrano, I., Martin, J., Dauvergne, J., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4868694
Tahirağaoğlu, B., Sevi̇lgen, G., & Hamut, H. S. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4881768
Zheng, Y., Che, Y., Sui, X., & Teodorescu, R. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567635
“To calculate the heat generation inside the battery cell, the model derived by Bernardi et al. has been adopted, which is given by [8], where I is the battery current (positive for charging and negative for discharging ∂ is a function of battery state of charge (SOC).”
MethodLuo, Y., Pan, Z., Gao, R., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4884794
Online Core Temperature Estimation Method for Lithium-Ion Batteries Over the Entire LifecyclePreprint
Chen, S., Wang, Z., Zhang, P., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4901671
A Comparative Study on Parameter Identifications of Battery Thermoelectric Coupling Model
Bao, J., Mao, Y., Zhang, Y., Jiang, Y., Zhang, Z., & Yang, Y. P. (2024) · International Conference on Power Electronics Systems and Applications · doi:10.1109/pesa62148.2024.10594955
Sadek, M., & Huzayyin, O. A. (2024) · Next Energy · doi:10.1016/j.nxener.2024.100175
Effect of Battery Inclination on the Performance of a Battery Thermal Management System
Kebaitse, K., Harikrishnan, S., & Varghese, J. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-4500-5_10
Thermal Management of Lithium Titanium Oxide Batteries: A Numerical Study
Samuel, S., Poulose, A., & Prakash, K. A. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-67241-5_44
Numerical Investigation of Novel Cylindrical Lithium-Ion Battery Pack Mini-Channel Cooling Plate
Zunaid, M., Mustafa, M., & Khan, D. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-4947-8_2
A Physics-Informed Cold-Start Capability for xEV Charging Recommender System
Orbay, R., Singh, A. P., Emilsson, J., Becciani, M., Wikner, E., Gustafson, V., & Thiringer, T. (2024) · IEEE Open Journal of Vehicular Technology · doi:10.1109/ojvt.2024.3469577
“The thermal conditions governed by a time dependent energy equation modified from [38] as shown in (1).”
Velumani, D., & Bansal, A. (2024) · Green energy and technology · doi:10.1007/978-981-97-5415-1_31
Advancements in Lithium-Ion Capacitor Modeling and Pre-Lithiation Techniques
丁, 佳. (2024) · Material Sciences · doi:10.12677/ms.2024.1410155
A heating method combining AC pulse heating with electrothermal film
Ou, Y., Zhu, J., Wei, X., Ji, C., Jiang, B., Wang, X., Liu, Q., Wang, J., & Dai, H. (2024) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific63159.2024.10738661
He, Y., Liu, Y., Yang, B. Y., et al. (2024) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific63159.2024.10738552
Yang, J., Hu, Z., Wang, Z., et al. (2024) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific63159.2024.10738663
Research on the staggered battery thermal management system based on air distribution pipes
Chen, J., & Li, G. (2024) · Thermal Science · doi:10.2298/tsci240803249c
Electrochemical and Thermal Analysis of Lithium‐Ion Battery Pack With Different Cell Configurations
Kömürcü, B. N., Elden, G., Çelik, M., et al. (2024) · Energy Storage · doi:10.1002/est2.70090
“Bernardi et al. [9] developed the first thermal model.”
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.