A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 1,601–1,700 of 2,542
A Simplified Extension of Physics-Based Single Particle Model for Dynamic Discharge Current
Chen, J.-L., Wang, R., Li, Y., & Xu, M. (2019) · IEEE Access · doi:10.1109/access.2019.2961509 · Cited by 6
“And there are four heat sources: electrical losses, entropic heat, heat generated by side reaction, and heat of mixing [34].”
BackgroundSimulation and Experimental investigation of Battery Thermal Management System for a Hybrid Vehicle
Qiu, W., Li, G., Ouyang, C., et al. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/631/1/012093 · Cited by 5
Lee, C., Hsiang, T.-P., Chang, W.-H., & Lee, M. (2022) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2022.2053909 · Cited by 5
“The heat generation rate in the cell core during charge and discharge can be calculated on the basis of the Bernardi heat generation model [34], which can be written as”
BackgroundAn optimization design of battery temperature management system on new energy vehicles
Zhang, G., Zuo, F., Tong, T., et al. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.02.090 · Cited by 5
Zhao, Q., Wu, H., Wang, Z., et al. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.992779 · Cited by 5
Xin, Z., Tang, W., Li, W., et al. (2022) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific56316.2022.9942199 · Cited by 5
Tang, Z., Zhao, Z., Ji, Y., & Cheng, J. (2023) · Journal of Energy Engineering · doi:10.1061/jleed9.eyeng-4793 · Cited by 5
Zhong, W., Li, M., & Shangguan, W. (2023) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2023-01-0768 · Cited by 5
Research on Thermal Management Coupling by CPCM and Liquid Cooling for Vehicle Lithium-Ion Batteries
Wang, Y., Du, C., & Wang, Z. (2023) · Energies · doi:10.3390/en16145260 · Cited by 5
Heat transfer characteristics of liquid cooling system for lithium-ion battery pack
Zhao, J. W., Du, W., Xiang, H., et al. (2024) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1177/09544070231220750 · Cited by 5
Su, F., Xiao, J., Wang, L., et al. (2024) · Ionics · doi:10.1007/s11581-024-05423-6 · Cited by 5
“…using an analytic function; the relationship between temperature and electrochemical parameters was generally established by the Arrhenius equation [26]: where φ( T ) denotes various parameter functions related to the temperature, φ ref ( T ) is the parameter at the reference temperature , and E a…”
Shaikh, U. I., Kamble, D., & Kore, S. S. (2024) · Heat Transfer Research · doi:10.1615/heattransres.2024052690 · Cited by 5
Zhao, Y., Hao, J., Hu, J., et al. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124973 · Cited by 5
Yang, X., & He, W. (2025) · Heat Transfer Engineering · doi:10.1080/01457632.2025.2459983 · Cited by 5
“Bernardi et al. [37] proposed a model for the heat generation rate of a single battery: (4) where q is the volumetric heat source (W/m 3 ), I is the operating current (A), V OC is the open-circuit voltage (V), V is the operating voltage (V), R is the internal resistance ( X ), IT dV OC dT…”
Thermal Management Modeling for Avoidance of Thermal Runaway Conditions in Lithium-Ion Batteries
Ponchaut, N. F., Colella, F., Spray, R. L., et al. (2014) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2014-01-0707 · Cited by 5
Reversible heat generation rates of blended insertion electrodes
Heubner, C., Schneider, M., & Michaelis, A. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3594-3 · Cited by 5
Towards the implementation of refurbished ev lithium-ion batteries for smart grid energy storage
Alaoui, C., Zineddine, M., & Saidou, N. (2017) · International Conference on Intelligent Systems and Computer Vision (ISCV) · doi:10.1109/isacv.2017.8054989 · Cited by 5
“Excessive heat can lead to thermal runaway and explosion of the battery [14].”
BackgroundOptimized passive thermal management for battery module
Jaguemont, J., Omar, N., den Bossche, P. V., et al. (2017) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2017.8055930 · Cited by 5
“1, the energy balance equation of the battery cell is used to describe the transient thermal distribution in the LiC, where the amount of generated heat must be stored inside the cell or transferred from the cell to its surrounding can be formulated as [15]:”
MethodThermo-Electric Model of the Power Battery and Module Based on AMESim
Wang, J., Pan, C.-Y., Xu, H., et al. (2017) · International Conference on Mechanical, Automotive and Materials Engineering (CMAME) · doi:10.1109/cmame.2017.8540167 · Cited by 5
SIM, C.-H., & Kim, H.-S. (2020) · Journal of Hydrogen and New Energy · doi:10.7316/khnes.2020.31.5.489 · Cited by 5
DREMUS: A Data-Restricted Multi-Physics Simulation Model for Lithium-Ion Battery Storage
Rogall, M., Barai, A., Brucoli, M., Luk, P. C. K., Bhagat, R., & Greenwood, D. G. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.102051 · Cited by 5
“The heat generation of Li-Ion cells is primarily bound to Ohmic (caused by electrical resistance, qohm), reactive (caused by electrode overpotential, qreac) and entropic (caused by reversible chemical reaction, qent) heat [39,40]:”
BackgroundVeszelka, Z., Queisser, O., Gontscharow, M., et al. (2020) · Energy Technology · doi:10.1002/ente.202000906 · Cited by 5
Guo, Z., Xiong, Q., Zhang, C., Zhu, L., & Ji, S. (2021) · Power System and Green Energy Conference (PSGEC) · doi:10.1109/psgec51302.2021.9542726 · Cited by 5
“first proposed a universal thermal model based on a complete battery thermodynamic energy balance (excluding the collector fluid) [8].”
BackgroundLi, W., Vila, M. N., Housel, L. M., et al. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00350-y · Cited by 5
Doosthosseini, M., Ghods, H., Talkhoncheh, M. K., Silberberg, J. L., & Weininger, S. (2023) · Cardiovascular Engineering and Technology · doi:10.1007/s13239-023-00676-0 · Cited by 5
Cooling simulation and experimental analysis on power lithium-ion battery pack
Duan, Y., Jiang, J., Wang, Z., et al. (2014) · doi:10.1109/itec-ap.2014.6940970 · Cited by 5
“Bernardi presented the calculation model about the battery heat generation [7].”
BackgroundZhang, C., Xia, Z., Gao, H., et al. (2020) · Energies · doi:10.3390/en13174296 · Cited by 5
Murashko, K., Mityakov, A. V., Mityakov, V. Y., Sapozhnikov, S. Z., & Pyrhonen, J. J. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8098980 · Cited by 10
“The different thermal models are discussed extensively in the literature [3]–[8].”
BackgroundWu, X., Wang, K., Chang, Z., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4113001 · Cited by 5
Zhang, X., Li, P., Huang, B., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4123758 · Cited by 5
Sharma, D. K., Langeh, H., Nayak, R., et al. (2025) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4069005 · Cited by 4
Li, L., Wang, B., Zhou, Z., Gong, J., & Yang, L. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2025.107784 · Cited by 5
Zheng, Y., Yao, B., Zhu, Y., et al. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118354 · Cited by 4
Pang, Y., Liu, J., Li, K., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128276 · Cited by 4
Lee, G. (2025) · Energies · doi:10.3390/en18185006 · Cited by 5
Fast estimation of liquid-cooled module temperature based on electro-thermal- liquid coupling model
Shen, K., Zhao, W., Sun, Y., Lai, X., Meng, X., Feng, X., & Zheng, Y. (2025) · Energy · doi:10.1016/j.energy.2025.138615 · Cited by 3
Zhang, T., Ye, S., Xi, H., & An, D. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128666 · Cited by 5
Velumani, D., & Bansal, A. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae1dd3 · Cited by 4
Zuo, X., Peng, P., Wang, Y., et al. (2025) · Batteries · doi:10.3390/batteries11110416 · Cited by 4
An, Z., Zhao, S., Du, X., et al. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.104335 · Cited by 4
Simulation study on battery thermal management system with dendrite-type spoiler structure
Wu, D., & Li, G. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.128107 · Cited by 4
Study of an immersion battery thermal management system based on hydrofluoroether fluid
Luo, Y., Zhou, R., Zhu, C., et al. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.128422 · Cited by 4
Qi, Z., Yang, B., & Lei, J. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120835 · Cited by 7
Zhang, J., Yang, Y., Lan, C., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.129991 · Cited by 4
Thermal management of energy storage batteries using bionic lung-based liquid cooling plates
Wang, F., Zhang, J., Deng, C., Liu, H., Li, Z., Tian, Y., Li, J., Zhang, G., & Zhang, X. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.130350 · Cited by 5
Thermal Modeling of Battery Cells for Optimal Tab and Surface Cooling Control
Peprah, G. K., Huang, Y., Wik, T., Altaf, F., & Zou, C. (2026) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2026.3675726 · Cited by 7
“To facilitate the study without losing generality, the volumetric heat generation rate q is given by the heat generation model proposed by Bernardi et al. [31] where I , V , V ocv , and V b are the battery current, terminal voltage, open-circuit voltage, and volume, respectively.”
Xu, Q., He, R., Xu, Y., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.130786 · Cited by 4
Lu, C., Hu, B., Chen, M., et al. (2026) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2026.108792 · Cited by 4
Choi, M., Du, X., Choe, S.-Y., & Garrick, T. R. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240007 · Cited by 6
Battery thermal management system based on phase change material with carbon fiber mesh
Gökaslan, M. Y. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.111569 · Cited by 12
Lithium-Ion Battery Thermal Parameter Identification and Core Temperature Estimation
Saqli, K., Bouchareb, H., Oudghiri, M., & M’Sirdi, N. K. (2022) · Journal of Polytechnic · doi:10.2339/politeknik.1161986 · Cited by 4
Thermal Characterization of Lithium-Ion Batteries under Varying Operating Conditions
Adeyinka, A. M., Yu, K., Choe, S.-Y., et al. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-01-2667 · Cited by 4
Huang, Z., Wang, H., Gan, Z., Yang, T., Yuan, C., Lei, B., Chen, J., & Wu, S. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.123219 · Cited by 3
Pulse self-heating strategy for low-temperature batteries based on bidirectional charging systems
Li, Z., & Wang, N. (2024) · Journal of Power Electronics · doi:10.1007/s43236-024-00947-6 · Cited by 3
“Bernardi’s [18] heat generation rate model is often used as a simplified heat generation model for LiBs, as shown in (2).”
Industrial EV Battery Performance Evaluation: A Review From the Instrumentation Perspective
Huemiller, E., McGovern, M. E., Du, X., Salvador, J. R., Wagner, S., & Collin, W. (2025) · IEEE Open Journal of Instrumentation and Measurement · doi:10.1109/ojim.2025.3544347 · Cited by 4
“…heat capacity and thermal transport properties for increasingly larger format cells of all form factors driven by the large volume of active materials generating heat ( Q ) through reversible and irreversible processes [127] to the comparably low surface area available for heat rejection [128].”
Peneklioğlu, K., Bilen, K., Altunay, F., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126191 · Cited by 4
Williams, N. P., Trimble, D., & O’Shaughnessy, S. M. (2025) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2025.101062 · Cited by 17
Wang, Y., Guo, Q., Zhou, Z., Li, H., & Ma, D. (2025) · Engineering Applications of Computational Fluid Mechanics · doi:10.1080/19942060.2025.2517314 · Cited by 7
“…following equation provides the conservation of energy: The battery heat production model is based on the model proposed by Bernardi and his team (Bernardi et al., 1985), which assumes that the battery is a constant heat source and takes into account the heat generated by the polarisation of the…”
Simulation and explosion suppression study of marine lithium battery compartment explosion accidents
Xu, L., Li, P., & Huang, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117422 · Cited by 4
Suti, A., Budinger, M., Rito, G. D., & Reysset, A. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126637 · Cited by 7
A System Identification Approach to Estimate Lithium-Ion Battery Entropy Coefficients
Widanage, W. D., Queisser, O., Paarmann, S., et al. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/adfe1f · Cited by 4
Yang, M., Zhang, S. W., Tian, H., Lv, L., & Han, J. (2025) · Batteries · doi:10.3390/batteries11090326 · Cited by 6
“Bernardi D. et al. [30] determined the battery heat generation rate model through numerical calculation and theoretical analysis.”
Uncertainty quantification in the peak stress of silicon-carbon anode lithium-ion batteries
Huang, Z., Xie, J., Yang, T., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238308 · Cited by 4
Zeng, F., Yu, W., & Zuo, Z. (2022) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2022.2042625 · Cited by 4
“…to study thermodynamic physical parameters, an in-depth study on the testing methods of heating power and specific heat capacity of batteries was implemented in Bernardi, Pawlikowski, and Newman (1985), and the ease of implementation of this measurement method was pointed out (Peng et al. 2019).”
Hong, C., Oh, S.-K., & Kim, Y.-S. (2022) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-022-1081-8 · Cited by 4
Study of the thermal behavior of a battery pack with a serpentine channel
Ding, Y., Ji, H., Liu, R., Jiang, Y., & Wei, M. (2022) · AIP Advances · doi:10.1063/5.0089378 · Cited by 4
Thermal modelling of cylindrical Lithium‐Ion batteries to study the impact of structural components
Rathod, D., Ghosh, N., Panigrahi, B. K., et al. (2022) · Energy Storage · doi:10.1002/est2.374 · Cited by 4
“derived the general energy balance which is useful to estimate the cell temperature characteristics.(2) On simulated C-rate discharge profiles, Kumaresan et al.”
BackgroundPiccirillo, F., Bianco, N. D., Noia, L. P. D., Guerriero, P., & Iasiello, M. (2022) · International Workshop on Thermal Investigations of ICs and Systems · doi:10.1109/therminic57263.2022.9950632 · Cited by 4
“After obtaining potential distribution, fully electro-thermal models have been proposed by many researchers [12] in order to predict temperature fields in batteries.”
MethodDevelopment of robust and accurate thermo-electrochemical models for Lithium-ion batteries
Halim, A. A. E. B. A. E., Bayoumi, E. H. E., El‐Khattam, W., & Ibrahim, A. M. (2023) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2023.100342 · Cited by 5
Torun, E., & Buyruk, E. (2024) · Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.47495/okufbed.1368176 · Cited by 4
Thermal Behavior Simulation of Lithium Iron Phosphate Energy Storage Battery
Yu, H., Cai, J., & Zhang, X. Y. (2024) · Journal of Electrochemical Science and Technology · doi:10.33961/jecst.2024.00339 · Cited by 4
“The thermophysical parameters of the LFP, including density, specific heat capacity, and thermal conductivity, are considered.”
Meng, X., Sun, H., Jiang, T., Huang, T., & Yu, Y. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15060270 · Cited by 4
“According to the Bernardi heat generation model [17], the heating of the battery is calculated by the following formula: where I represents the battery current; V OCV represents the open circuit voltage of the battery; V L is the terminal voltage; T is the battery temperature, which represents the…”
Bae, J., Yun, J., & Han, J. (2024) · Energies · doi:10.3390/en17225729 · Cited by 4
Qawasmeh, B. R., Alrbai, M., & George, S. (2024) · Energy Exploration & Exploitation · doi:10.1177/01445987241310003 · Cited by 4
“The heat generation rate of the cells is expressed as proposed by Bernardi et al. (1985) below: where Q ir is the irreversible heat, Q re the reversible heat, I the electric current, V o the open circuit potential, V the cell potential, respectively, h s the heat transfer coef fi cient per cell, M A…”
Research on Composite Liquid Cooling Technology for the Thermal Management System of Power Batteries
Zhu, L., Li, D., & Wu, Z. (2025) · World Electric Vehicle Journal · doi:10.3390/wevj16020074 · Cited by 4
Chen, Z., Hu, J., Xia, X., Liu, Y., Zhang, Y., Liu, Y., Shen, J., & Wei, F. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116281 · Cited by 6
A computationally efficient approach for immersion cooling of a Li-Ion battery cell
Tripathi, P. M., & Marconnet, A. M. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.108856 · Cited by 4
Thermal analysis of nanofluid submerged battery tab under fast charging conditions
Hong, H., Song, X., d’Apolito, L., Sun, L., & Shen, S. C. (2025) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2025.106474 · Cited by 6
Allafi, W., Zajić, I., & Burnham, K. J. (2014) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-08422-0_9 · Cited by 4
Thermal investigation of a battery module for work machines
Abdul-Quadir, Y., Heikkila, P., Lehmuspelto, T., et al. (2011) · doi:10.1109/esime.2011.5765758 · Cited by 4
Modeling the heat of mixing of LiMn2O4 pouch type battery
Esmaeili, J., & Jannesari, H. (2016) · Iranian Conference on Renewable Energy & Distributed Generation (ICREDG) · doi:10.1109/icredg.2016.7875908 · Cited by 4
Experimental assessment of the lumped lithium–ion battery model
Özdemir, T., Amini, A., Ekici, Ö., et al. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201912801022 · Cited by 4
Özdemir, T., Ekici, Ö., & Köksal, M. (2021) · E3S Web of Conferences · doi:10.1051/e3sconf/202132103007 · Cited by 4
Milyani, A. H., Ajour, M. N., Alhumade, H., et al. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104931 · Cited by 4
Carnovale, A., & Li, X. (2022) · Frontiers in Thermal Engineering · doi:10.3389/fther.2022.1049857 · Cited by 5
“Early effort involves the application of Bernardi et al. ‘ s work (Bernardi et al., 1985) to characterize battery heat generation.”
Shen, K., Yang, L., Sun, J., et al. (2022) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4056112 · Cited by 4
Dao, T.-T., & Kim, B. (2023) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-023-0125-2 · Cited by 4
“This is based on the previous studies’ assumption that the heat capacities of battery system do not change substantially during operation in most practical applications [9, 22].”
BackgroundGeng, C., Wang, D., & Cui, F. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110019 · Cited by 4
A novel order-reduced thermal-coupling electrochemical model for lithium-ion batteries
Xie, Y.-Z., 王, S. 舒. W., 王, Z. 震. W., & 程, X. 夕. C. (2024) · Chinese Physics B · doi:10.1088/1674-1056/ad1f52 · Cited by 4
Mocera, F., & Vergori, E. (2018) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.12.014 · Cited by 4
Methekar, R. N. (2018) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.5046350 · Cited by 4
Sun, X., Xu, X., Tang, W., et al. (2020) · Thermal Science · doi:10.2298/tsci200118172s · Cited by 4
“Bernardi and Newman [25] first proposed the general expression of the heating rate of lithium- ion batteries from the conservation of battery energy.”
BackgroundInfluentialWang, H., Chen, S., Ji, Z., Li, H., Jiang, C., & Lin, H. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac1493 · Cited by 4
Khalili, H., Ahmadi, P., Ashjaee, M., et al. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-022-11601-3 · Cited by 4
An Analysis of Heat Generation in a Lithium Ion Cell
Catherino, H. A. (2015) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2015-01-2420 · Cited by 4
Modeling of discharge behavior of a lithium ion cell
Ali, S. A. H., & Arof, A. K. (2006) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.12.135 · Cited by 4
Thermal behavior simulation of Ni/MH battery
Da-he, L., Yang, K., Chen, S., et al. (2009) · 中国科学通报:英文版 · doi:10.1007/s11434-009-0105-7 · Cited by 4
Khasawneh, H. J., & Illindala, M. S. (2014) · doi:10.1109/ias.2014.6978373 · Cited by 4
“4 highlights the chemical reactions happening in the FC module.”
BackgroundKhan, M. R., & Kær, S. K. (2016) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2016.7791713 · Cited by 4
Stanciu, T., Stroe, D., Swierczynski, M. J., Teodorescu, R., Nieto, N., Gastelurrutia, J., & Timmermans, J.-M. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7855341 · Cited by 7
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.