The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
A General Energy Balance for Battery Systems
Open accessAbstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 2,401–2,500 of 2,542
Experimental Investigation of Integrated Heat Pipe—Liquid Cooling for a Battery Pack
Reddy, K. D., Vasista, K. N., Reddy, B. K., & Balaji, C. (2026) · Heat Transfer Engineering · doi:10.1080/01457632.2026.2687186
Huang, J., Yan, Y., ZHANG, C., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132182
Petruzziello, F., Cilenti, C., Aprea, C., & Maiorino, A. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.111889
Lu, Y., Jialiang, Y., Wu, X., et al. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-15757-0
“According to the battery heat generation model proposed by Bernardi et al. [43], the heat generation power q gen of a single battery is calculated using Eq.”
Manav, G., Yapıcı, M. M., & Saygın, A. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.241122 · Cited by 1
Mishra, S., Swain, S. C., Mayaluri, Z. L., Sahoo, P. K., & Samantaray, A. K. (2026) · Scientific Reports · doi:10.1038/s41598-026-44025-2
“Compact electro– thermal ECMs therefore couple a low-order electrical model to a low-order thermal network and compute heat generation using energy-balance formulations commonly attributed to Bernardi-type decompositions 12–15 .”
Le, T.-L., Ngo, N.-V., Tran, D., et al. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.111145
Xiao, S., Wu, X., & Luo, H. (2026) · Journal of Physics Conference Series · doi:10.1088/1742-6596/3269/1/012075
“The volumetric heat generation rate is calculated employing the Bernardi formulation [7], expressed in Equation (2).”
Waheed, H., & Abro, G. E. M. (2026) · Discover Vehicles · doi:10.1007/s44465-026-00025-0 · Cited by 2
“Battery core temperature dynamics follow a lumped-capacitance ordinary differential equation (ODE) [40, 41]: Discretised with forward Euler at ∆ t = 10 min: Validated against electrochemical-thermal simulations across 25–65 ◦ C [41, 42].”
Wang, C. H., Yu, P., Liu, Q., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132217
Du, Z., Xu, C., Wenjing, D., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132224
Siricharoenpanich, A., Faraji, H., & Naphon, P. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123515
Hou, S., Wang, S., & Chen, K. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.129244
Wu, M.-S. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.111973
Xiao, Y., Wang, F., Liu, C., Wan, F., & Liu, W. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240912
Wang, M., Tang, S., Wu, L., Liu, B., & Sun, D. (2026) · International Journal of Energy Research · doi:10.1155/er/1223347
Mavi, A., & Arslan, O. (2026) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2026.07.015
Chen, J. K., Kong, Q., Zhou, P., et al. (2026) · Sustainability · doi:10.3390/su18146960
Isothermal Microcalorimetry for Battery Characterization
Arnot, D. J., Li, W., Stein, N. V., Yan, S., Takeuchi, E. S., Marschilok, A. C., & Takeuchi, K. J. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae888c
Xie, Y.-T., Xiang, L.-F., Zhou, X.-F., et al. (2026) · Fuel · doi:10.1016/j.fuel.2026.140542
Tubular form factor batteries to enable affordable and durable fast charging
Jung, Y., Kubal, J. J., Knehr, K. W., Ahmed, S., & Song, J. (2026) · Device · doi:10.1016/j.device.2026.101242
Zhang, H., Chen, Y., Sun, Y., et al. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-15864-y
“The battery's heat generation rate is calculated based on the Bernardi et al. [32] heat generation model, as shown in Eq.”
Lithium-ion Batteries and Energy Storage Systems
Ditch, B. D., Zeng, D., & Hewson, J. C. (2026) · The Society of fire protection engineers series · doi:10.1007/978-3-031-59212-6_81
Xi, H., Luo, C., & Li, J. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132407
IIZUMI, M. (2026) · Advanced Theory and Simulations · doi:10.1002/adts.70468
Tang, Y., Guan, T., Song, X., et al. (2026) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2026.104825
Gu, X., Chao, G., Ding, P., et al. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123592
Li, A., Wang, Z., Han, Y., et al. (2026) · doi:10.1109/ecitech69277.2026.11601495
“The heat generation term is based on the Bernardi formulation [2] : Auxiliary power model.”
A review of integrated thermal management system for pure electric vehicles
Luo, J., Ma, B., Liang, X., Liu, T. S., Liang, X., & Jiang, C. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-15900-x
“To sum up, the total heat ( Q ) of lithium ion battery is shown as formula [29]:”
Graph-Attention-Based Core-Temperature Estimation for Large-Format LFP Prismatic Batteries
Zhang, T., Fan, Y., Qin, H., Cheng, S., & Song, T. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae8eb6
Zadehbagheri, M., Tabeshmoghaddam, M., Nejatian, S., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7163763
zhang, L., & He, W. (2026) · Applied Energy · doi:10.2139/ssrn.7163766 · Cited by 1
Chen, H., Liang, K., Gao, C., Zhou, X., Wang, L., Chen, B., Zhang, C. Z., Li, S., & Duan, H. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132455
Wang, Q., Qin, W., Zheng, Z.-Y., & Xiao, X. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123736
Yi, Z., Shi, Q., Liu, Q., et al. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123865
Experimental study on the comparative thermal performance of lithium-ion battery cooling strategies
Wang, X., Huang, Z., Zhang, M., et al. (2026) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1177/09544070261470727
Ma, Z., Wu, C., Feng, G., et al. (2026) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4072403
Machine learning-based fault diagnosis for lithium-ion battery systems
Maaradji, T. M. A., Alem, S., Gravante, E., et al. (2026) · Transactions of the Institute of Measurement and Control · doi:10.1177/01423312261466331
Heat and mass transfer synergy and dissipation in adsorption-based battery thermal management system
Lan, K., Li, M., Zhang, W., Long, R., & Liu, Z. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.129370 · Cited by 1
mao, C., Gao, W., Zhang, X., Qian, Y., Xu, M., Xu, Y., & Zhao, Y. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123901
Yang, S., Ge, J., Gao, B., Yang, L., Wu, X., Wang, P., Li, M., & Xu, W. (2026) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2026.109375
Lu, B., Zhao, R., Long, W., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132631
Ding, X., Xu, D., Zhao, F., Guo, J., & Huang, Q. (2026) · Applied Soft Computing · doi:10.1016/j.asoc.2026.116125
Huang, Z., & Fan, G. (2026) · International Conference on New Energy System and Power Engineering (NESP) · doi:10.1109/nesp70395.2026.11622174
“The optimal ambient temperature range for lithium-ion batteries when operating is 15–35 °C [1].”
Da, S., Tang, Y., Li, C., & Han, W. (2026) · Applications in Energy and Combustion Science · doi:10.1016/j.jaecs.2026.100545
Cuellar, J. R., Torregrosa, A. J., Broatch, A., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7244684
Hu, J., Cai, H., Yu, H., Zhao, R., Chen, Z., Ni, M., Zhong, X., Wan, S., & Ji, D. (2026) · Energy & environment materials · doi:10.1002/eem2.70494
Mehrabi, A., Vu, N. V., Nazari, M. A., Fard, H. F., Ahmadi, M. H., Usanov, S., Saitov, E., & Abdullayev, N. (2026) · Engineering Applications of Computational Fluid Mechanics · doi:10.1080/19942060.2026.2709291
Zou, D., Zhang, X., & Ji, J. (2026) · Energy Technology · doi:10.1002/ente.70580
Ye, L., Liao, B., Qin, W., Feng, M., & Wei, F. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-16102-1
“Bernardi et al. [18] simplified the theoretical calculation model for lithium battery heat generation by assuming a uniform internal temperature field and ignoring the heat from internal mixing phase changes.”
Rahani, K. K., Gharehghani, A., & Mamoei, A. J. (2026) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2026.102209
Xue, K., Yuan, Q., Zhang, B., & Du, X. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123989
Tang, Y., Qin, J., Chen, J., et al. (2026) · Modelling and Simulation in Engineering · doi:10.1155/mse/4032488
Han, T., Kim, S., & Lee, S.-W. (2026) · eTransportation · doi:10.1016/j.etran.2026.100628
An adaptive heating strategy for battery packs in electric vehicles under low temperature
Zhu, L., Wang, S., & Chen, K. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112292
A phenomenological-based model for the thermal management system in electric vehicles
Bazan-Escoda, A., Álvarez, H., Ocampo‐Martínez, C., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132634
Saeed, A., Alawi, A., Janaideh, M. A., El-Baz, A., & Sharqawy, M. H. (2026) · Batteries · doi:10.3390/batteries12080304
“Bernardi et al. [37] developed a universal equation for the generation of heat in battery cells given by Equation (1), where Q represents the volumetric heat generation in W/m 3 , V represents the cell volume, I represents the current flow, R i represents the internal resistance, T is the cell…”
Qi, X., Briggs, C., & Marco, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.117395
Hybrid Battery Thermal Management: Architectures, Optimization, and Emerging Technologies
Gupta, V. K., Chand, P., Ray, A. K., & Priti (2026) · International Conference on Sustainable Computing and Smart Systems (ICSCSS) · doi:10.1109/icscss69635.2026.11645983
“PCMs offer passive latent heat absorption but can be overwhelmed during prolonged high-rate discharge events [3].”
Hussain, Z., Arshad, B., Ghaffar, H. A., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7291025
Liu, Z., Li, J., Yang, L., Zhang, Y., Yuan, Z., Jiang, G., & yuan, H. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132656
Kalkan, O., & Demir, F. (2026) · Journal of Innovative Science and Engineering (JISE) · doi:10.38088/jise.1927130
Zhang, T., Fan, Y., Qin, H., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132749
Lithium-Ion Battery Temperature Estimation Based on Electrochemical Impedance Spectroscopy
Issayenko, T., Opferkuch, F., & Rinderknecht, S. (2026) · Batteries · doi:10.3390/batteries12080309
“Additionally, numerical simulations, including one-dimensional (1D), pseudo-two-dimensional (P2D), and two-dimensional (2D) models based on the Chebyshev spectral–Galerkin method [11], the Bernardi equation [22], or the Arrhenius equation [23,24], have been employed.”
Joy, J. M., & Rakshit, D. (2026) · Heat Transfer Engineering · doi:10.1080/01457632.2026.2715223
CFD and CHT Methodology for the Thermal Simulation and Validation of a Prismatic LiFePO4 Cell
Fedeli, D., Lagnoni, M., Scarpelli, C., et al. (2026) · Fluids · doi:10.3390/fluids11080204
“The classical energy balance proposed by Bernardi et al. [10] provides a fundamental framework for estimating heat generation in electrochemical systems.”
Thermal‐Hydraulic Performance of Microchannel Heat Sink for Water‐Cooled Lithium‐Ion Batteries
Hou, T., Zeng, P., Chen, J., et al. (2026) · Chemical Engineering & Technology · doi:10.1002/ceat.70302
Zhou, Y., Zhang, H., Xiong, T., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7312106
Qian, C., Zuo, J., & Zhang, Y. (2026) · Energy Conversion and Management · doi:10.1016/j.enconman.2026.122067
Mu, X., Wang, Y., Qiu, Y., et al. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124194
Khan, A., & Hussain, K. (2026) · Journal of Electrochemical Science and Engineering · doi:10.5599/jese.3573
“When detailed internal electrochemical variables are unavailable, total cell heat generation can be approximated using Equation (11) [15,122]: where I / A is the applied current, U OC / V is the open-circuit voltage, V cell / V is the terminal voltage.”
InfluentialGuanghua, L., Cheng, L., & Shah, S. H. H. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124300
Droese, D., Hafemeister, M., Schubert, A., Schlösser, A. E. K., & Kowal, J. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124301
Yang, Q., Yang, T., Huang, Q., et al. (2026) · Energy · doi:10.1016/j.energy.2026.142257
Shen, Y., Huang, W., & Wang, Q. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7346619
Current-Stress-Aware Fuzzy Logic Control for Safe Fast Charging of Lithium-Ion Battery Packs
Sardahi, Y., Salem, A., & Farris, J. (2026) · Energies · doi:10.3390/en19173975
Kim, S., Ko, J., Ha, J., et al. (2026) · Computer Physics Communications · doi:10.1016/j.cpc.2026.110374
Design, Fabrication, and In-Flight Demonstration of a 24S NCM Battery System for an eVTOL Aircraft
Yu, S., Jung, Y.-J., Cho, B.-D., et al. (2026) · Batteries · doi:10.3390/batteries12090317
“The total heat generation of a lithium-ion battery consists of irreversible ohmic heat, electrochemical reaction heat, and reversible entropic heat [19].”
Sakkay, M., Aqid, H. E., Ghandouri, I. E., et al. (2026) · International Conference on Circuit, Systems and Communication (ICCSC) · doi:10.1109/iccsc71566.2026.11650073
Alqurashi, F., & Khan, M. A. (2026) · Journal of King Saud University - Engineering Sciences · doi:10.1007/s44444-026-00127-w
Mallick, S., & Kumar, N. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7353133
Liang, L., Chen, J., Ma, H., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7355990
Tahirağaoğlu, B., Albak, E. İ., & Sevi̇lgen, G. (2026) · International Journal of Energy Research · doi:10.1155/er/8734019
Kong, W., Zhang, Z., Gao, L., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7353162
Mehedi, M. I., Rasangika, A. H. D. K., Nawaz, M. Q., et al. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.111283
Yang, K., Yuan, J., Shi, H. G., et al. (2026) · Energies · doi:10.3390/en19174014
Abutaha, R., Hameed, A. Z., Alkabaa, A. S., Deepankumar, S., & Karthick, K. N. (2026) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-026-16096-w
“Continuous operation outside the recommended temperature range of 20–45 °C accelerates electrolyte decomposition, increases internal resistance, promotes capacity fading, and significantly elevates the risk of thermal runaway, thereby compromising both battery safety and durability [1–3].”
Kavasoğullari, B., Oztop, H. F., Gür, M., et al. (2026) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2026.106977
Tian, A., Gong, C., Wang, R., et al. (2026) · Energy Technology · doi:10.1002/ente.70635
Residual-Symmetry-Gated Online Series-Resistance Adaptation for Lithium-Ion Battery SOC Estimation
Ding, L., Shi, H., & Yang, K. (2026) · Symmetry · doi:10.3390/sym18091469
“Detailed electro-thermal energy-balance formulations are outside the present scope [19,20].”
Moyez, S. A., & Singh, L. R. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7386835
Research Progress on Thermal Runaway and Thermal Management of Lithium‐Ion Batteries
Li, S., Zhao, W., Zhang, Y., Wu, X., & Chen, Z. (2026) · Safety Science and Technology · doi:10.1002/sst3.70045 · Cited by 1
Rallabandi, S., & Vedaraj, I. S. R. (2026) · Frontiers in Energy Research · doi:10.3389/fenrg.2026.1817181
Jiang, Z., Itamoto, R., Lin, J., Mikšík, F., Miyazaki, T., Kim, Y., & Thu, K. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.117458
Zhang, C., Tian, W., Hong, L., et al. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112524
Pang, Y., Li, K., Xie, Y., Liu, J., & Tan, W. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133031
Kshirsagar, K. B., & Kavade, R. K. (2026) · Next Energy · doi:10.1016/j.nxener.2026.100965
Kim, J., Oh, Y., Park, J., Park, B., Lee, S., & Lee, B. J. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112465
Badikan, K., Jamsawang, S., Thongtip, T., et al. (2026) · International Conference on Technical Education (ICTechEd) · doi:10.1109/icteched69022.2026.11682868
“According to the widely accepted Bernardi electrochemical thermal model, the total heat generated by a lithium-ion cell during operation is predominantly composed of irreversible Ohmic heating (due to internal resistance, I 2 R ) and reversible entropic heating [13].”
Raju, R. S. K., & Vedaraj, I. S. R. (2026) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2026.1886296
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.