The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
A General Energy Balance for Battery Systems
Open accessAbstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 2,001–2,100 of 2,542
Thermal modeling and validation for EV battery packs in realistic operation conditions
Chen, H., Zhu, L., Liu, J., et al. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1600/1/012074 · Cited by 1
Yetik, Ö., & Karakoç, T. H. (2020) · SAE International Journal of Aerospace · doi:10.4271/01-13-02-0016 · Cited by 1
Tang, Y., Ai, L., Cheng, Y., et al. (2016) · Acta Physica Sinica · doi:10.7498/aps.65.058201 · Cited by 1
Anwar, C., & Suprayitno, A. (2021) · JURNAL KAJIAN TEKNIK MESIN · doi:10.52447/jktm.v6i1.4325 · Cited by 1
Optimized dispatch of energy storage systems based on improved battery model
Zheng, W., & Lei, K. (2022) · Journal of Renewable and Sustainable Energy · doi:10.1063/5.0097042 · Cited by 1
Current Research on Power Battery Thermal Management
Li, J. (2022) · Key Technologies on New Energy Vehicles · doi:10.1007/978-981-19-0844-6_1 · Cited by 1
Rosen, M. A., & Farsi, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-18862-6.00009-4 · Cited by 1
PV Based Automatic Irrigation System
Ellahi, M., bin Rehan, M., Raza, A., et al. (2023) · Pakistan Journal of Engineering and Technology · doi:10.51846/vol6iss1pp74-85 · Cited by 1
Study on the Uniformity of the Cooling System of the CPCM/Liquid-Cooled Composite Battery
方, 强. (2023) · Modeling and Simulation · doi:10.12677/mos.2023.122151 · Cited by 1
Xie, H. L., Wang, Y., Tian, J., et al. (2022) · International Conference on Advanced Electrical and Energy Systems (AEES) · doi:10.1109/aees56284.2022.10079297 · Cited by 1
“[9] analyzed the mechanism of heat generation of lithium-ion cells, based on the assumption that the internal materials of lithium-ion cells uniform heat generation, and then proposed a theoretical formula for calculating the heat generation of cells:”
BackgroundMulti-objective optimization of PCM-fin structure for staggered Li-ion battery packs
Qiu, C., Wu, C., Yuan, X., Wu, L., Yang, J., & Shi, H. (2023) · Bulletin of the Polish Academy of Sciences Technical Sciences · doi:10.24425/bpasts.2023.145677 · Cited by 3
Numerical Assessment of Cooling Systems for Thermal Management of Lithium-Ion Batteries
Farulla, G. A., Aloisio, D., Palomba, V., et al. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-3-031-24837-5_38 · Cited by 1
Electric Flight in Extreme and Uncertain Urban Environments
Wang, M., Luiz, S. O. D., Zhang, S., et al. (2023) · Sustainability · doi:10.3390/su151612590 · Cited by 1
“…the heat generation and dissipation, m B is the single cell mass, and C B is the specific heat capacity of the cell. q G is estimated by [26] Moreover, omitting the heat radiation of the battery cells, q C is given by where h c is the heat convection coefficient, and S B is the surface…”
BackgroundPredicting Thermal Behavior of Lithium–ion Batteries for Electric Car Applications
Azuaje–Berbecí, B. J., & Ertan, H. B. (2023) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/acemp-optim57845.2023.10287049 · Cited by 1
“Bernardi’s energy equation [11] is solved at each domain of the LIB and used to predict its spatial and temporal temperature gradients.”
MethodInvestigation on Hybrid Cooling Topologies of Li-Ion Battery Pack for Electric Vehicles
Selvan, V. A. M., Palanisamy, S., & Bharadwaj, H. (2023) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2023-28-0173 · Cited by 1
Thermal Modeling Considering Anisotropy of the 280Ah Lithium Iron Phosphate Battery
Lin, H., Hou, L., & Deng, Y. (2023) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems59686.2023.10345356 · Cited by 1
“Based on the Bernadi equation [9], the charging and discharging heat generation rate of the battery considering the entropy coefficient is 𝑞𝑞̇ = 𝐼𝐼 ( 𝑂𝑂𝐶𝐶𝑂𝑂 − 𝑈𝑈 ) + 𝐼𝐼𝜕𝜕 ( 𝑑𝑑𝑂𝑂𝐶𝐶𝑂𝑂 / 𝑑𝑑𝜕𝜕 ) (2) Where I is the charging or discharging current, charging is positive and…”
Numerical Study of Combined Heat Pipe and Water Cooling for Battery Pack Cooling
Liu, Z., & Zhao, H. (2023) · doi:10.1109/neessc59976.2023.10349269 · Cited by 1
“A more generic model for calculating heat generation in batteries is proposed according to Bernardi et al. [17]: where R 0 is the ohmic internal resistance, R p is the polarization internal resistance, I 2 R is the irreversible heat, ITdU/dT is the reversible heat, Because it is very complicated to…”
MethodConverging Fluid Channel Design to Improve Thermal Performance of Prismatic Lithium-ion Cell
Napa, N., Agrawal, M. K., & Tamma, B. (2023) · International Conference on Cyber Physical Systems, Power Electronics and Electric Vehicles (ICPEEV) · doi:10.1109/icpeev58650.2023.10391919 · Cited by 1
Research on accurate fire detection & early warning model for lithium-ion battery packs
Miao, H. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2703/1/012068 · Cited by 1
“To accurately describe the heat production rate of lithium-ion batteries, the heat production model was improved, as seen in Formula (4).”
MethodCrucial technologies for practical application of battery thermal management systems
Xu, J., Guo, Z., Wang, X., et al. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19025-4.00009-9 · Cited by 1
赵, 文. (2024) · Modeling and Simulation · doi:10.12677/mos.2024.133192 · Cited by 1
Study on multi-channel air cooling thermal management of prismatic power battery pack
Xiaohui, B. A. I., Yuanbo, G. A. O., ZHANG, Y., & Cunliang, L. I. U. (2024) · Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University · doi:10.1051/jnwpu/20244220260 · Cited by 1
Thermal analysis and performance of battery for an electric vehicle – A review
Sarma, V. K., Lindsay, N. M., Kathirvel, N. K., et al. (2024) · AIP conference proceedings · doi:10.1063/5.0208672 · Cited by 1
Thermal management of a battery pack using fin-embedded phase change material
Acharya, S., & Anand, C. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2805/1/012005 · Cited by 1
A Coupled Electro-Thermal Battery Model Identification and State Estimation Based on Digital Twin
Zhu, Y., Zhao, X., Yang, L., & Huang, J. (2024) · IEEE International Conference on Digital Twins and Parallel Intelligence (DTPI) · doi:10.1109/dtpi61353.2024.10778736 · Cited by 1
Electro-thermal model of a pouch cell battery considering thermal runaway
Piccirillo, F., Scognamiglio, F., Iasiello, M., & Chiu, W. K. S. (2025) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2940/1/012005 · Cited by 1
“Most of the electro-thermal models are based on Bernardi’s theory [3], [4].”
Modeling of Lithium-Ion Battery with Thermal Analysis
Unni, A., Mishra, U., Deepak, D., & Singh, M. (2024) · International Conference on Emerging Frontiers in Electrical and Electronic Technologies (ICEFEET) · doi:10.1109/icefeet64463.2024.10866583 · Cited by 1
Zhang, Y., Gao, T., Zhou, B., et al. (2025) · Lecture notes in electrical engineering · doi:10.1007/978-981-96-2625-0_32 · Cited by 1
Zhu, B., Zhang, Y., & Cao, F. (2025) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1177/09544070251321036 · Cited by 8
“…heat generation rate q bat is based on the formula of heat generation rate of battery under different working conditions proposed by Bernadi et al., 36 which is simplified as follows: Where, V bat represents the battery volume; U ocv represents the battery open circuit voltage; U out represents…”
He, Y., Liang, J., Jin, J., et al. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117113 · Cited by 1
Modeling of Vehicle Propulsion Systems
Zhang, X., & Mi, C. C. (2011) · Power systems · doi:10.1007/978-0-85729-736-5_3 · Cited by 1
Thermal Management Simulation of Lithium Ion Batteries for EV/HEV
Fofana, G. H., & Zhang, Y. T. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.457-458.350 · Cited by 1
“Moreover, those Lithium-ion batteries are exposed to lower or freezing temperatures environment drastically reduces Lithium-ion batteries’ energy and power[5].”
BackgroundResearch on Thermal Management System for the Vehicle Application of Lithium-Ion Power Batteries
Zhou, F., Zhong, Y., & Zhang, P. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.347-353.984 · Cited by 1
Modelling of batteries in electric vehicles
Amiribavandpour, P. (2024) · Swinburne figshare (Swinburne University of Technology) · doi:10.25916/sut.26295202 · Cited by 1
Allart, D., Montaru, M., & Gualous, H. (2017) · International Conference on Green Energy Conversion Systems (GECS) · doi:10.1109/gecs.2017.8066226 · Cited by 1
“The heat generation inside batteries is due to many phenomena such as reaction heat, mixed heat, phase heat [10].”
BackgroundWalker, W. Q., Ali, O. A., & Theriot, D. H. (2019) · Royal Society of Chemistry eBooks · doi:10.1039/9781788016124-00290 · Cited by 1
Pian, C., Liu, J., Zhao, H., et al. (2019) · Thermal Science · doi:10.2298/tsci181209186p · Cited by 1
Experimental investigation on electro-thermal characteristics of the commercial Li-ion battery
Wei, L., Zhang, L. Y., Yang, X., et al. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/268/1/012117 · Cited by 1
Thermal Modeling of a Lithium-Ion Battery Pack in a Plug-in Hybrid Electric Vehicle
Li, X., Yao, M., Zhu, L., et al. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8911876 · Cited by 1
Implications of Lithium-Ion Cell Variations on Multi-Cell Battery Pack Thermal Runaway
LeBel, F.-A., Messier, P., Tessier, A., et al. (2019) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc46532.2019.8952282 · Cited by 1
“During the discharge of a lithium-ion cell, the total amount of heat produced by a lithium-ion cell is in part due to changes in the entropy of the material and from irreversible losses [19].”
BackgroundA Suite of Reduced-Order Models of a Single-Layer Lithium-Ion Pouch Cell
Marquis, S. G., Timms, R., Sulzer, V., Please, C. P., & Chapman, S. J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abbce4 · Cited by 53
“and accounts for Ohmic heating QOhm,k due to resistance in the solid and electrolyte, irreverisble heating due to electrochemical reactions Qrxn,k, and reversible heating due to entropic changes in the the electrode Qrev,k [21].”
BackgroundAnalysis and design of a water-cooling structure for 18650 cylindrical battery
Zhang, X., Liu, J., Wang, T., et al. (2021) · International Conference on Intelligent Equipment and Special Robots (ICIESR) · doi:10.1117/12.2625450 · Cited by 1
“Bernard battery heat generation rate equation is as follow[13]:”
BackgroundLei, X. (2022) · Sensors and Materials · doi:10.18494/sam3655 · Cited by 1
Zhang, M., Xue, C., Qiu, H., et al. (2023) · Thermal Science · doi:10.2298/tsci220907208z · Cited by 1
Electrochemical Modelling of Na-MCl2 Battery Cells Based on an Expanded Approximation Method
Büttner, N., Purr, F., Giménez, C. S., et al. (2023) · Batteries · doi:10.3390/batteries9040200 · Cited by 1
Dynamic Model of Nickel Hydrogen Battery - The Virtual Test Bed Implementation.
Liu, S., Dougal, R. A., Weidner, J. W., et al. (2003) · international conference on Modelling and simulation · Cited by 1
Thermal Modeling and Optimization of Lithium-Ion Batteries for Electric Vehicles
Ghalkhani, M. (2017) · Scholarship at UWindsor (University of Windsor) · Cited by 2
Integrating Electrochemical Modeling with Machine Learning for Lithium-Ion BatteriesPreprint
Tu, H., Moura, S. J., & Fang, H. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2103.11580 · Cited by 1
“The SPMT is an improved version of the SPM, which contains an extra bulk thermal model to describe a LiB’s thermal behavior [22].”
MethodAhmad, A. M., Thenaisie, G., & Lee, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4046690 · Cited by 1
Zhu, G., Kong, C., Kang, J., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4177637 · Cited by 1
Ham, S. H., Jang, D. S., Lee, M., Jang, Y., & Kim, Y. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4188406 · Cited by 1
Structure optimization of liquid-cooled lithium-ion batteries based on particle swarm algorithmPreprint
Song, Z., Liu, X., & Qian, K. (2022) · Research Square · doi:10.21203/rs.3.rs-1990356/v1 · Cited by 1
Sirikasemsuk, S., Eiamsa‐ard, S., Sirijaroenpanitch, A., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4469535 · Cited by 1
Dong, H., Chen, X., Yan, S., Wang, D., Han, J., Guan, Z., Cheng, Z., Yin, Y., & Yang, S. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4621052 · Cited by 1
Grid-based thermal management of cylindrical lithium-ion batteriesPreprint
Tian, J., Wang, Z., & Sun, J. (2024) · Research Square · doi:10.21203/rs.3.rs-3827337/v1 · Cited by 1
Han, C., Cheng, Y., Wang, Z., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4778975 · Cited by 1
Zhang, B., Chen, Z., Tao, Q., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4815546 · Cited by 1
Li, Y., Bai, M., Zhou, Z., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4829480 · Cited by 1
Liu, F., Yang, Q., Wu, Q., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4904818 · Cited by 1
Bartwal, N., Roy, S., & Vanka, S. P. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4905257 · Cited by 1
Nema, P. K., Muthukumar, P., & Thangavel, R. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4998849 · Cited by 1
Reiter, A., Schütte, M., Rosenmüller, C., Stroebl, F., Lehner, S., Sauer, D. U., & Bohlen, O. S. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5142673 · Cited by 1
Miszneder, M., Rengstl, U., Hopp‐Hirschler, M., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6219018 · Cited by 1
Optimized Energy Management for Electric Vehicles and Infrastructures
Dahmane, Y. (2020) · theses.fr (ABES) · doi:10.70675/38cd0d5az0f9dz41c0z8443zc2daa01919b3 · Cited by 2
Thermal Modeling and Effects of Electrode Configuration on Thermal Behaviour of a LiFePO4 Battery
Ruan, C., Diao, K., Chen, H., et al. (2012) · Lecture notes in electrical engineering · doi:10.1007/978-3-642-33741-3_5
“[1] derived a general heat generation expression for battery by using thermodynamic energy balance analysis on the cell control volume (not including current collectors).”
MethodSpace-resolved reduced order modeling of prismatic battery thermal dynamics
Lin, X., & Lee, T.-K. (2015) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2015.7170751 · Cited by 1
“Most of the existing models for prismatic batteries use a few states to represent the battery thermal dynamics [15-18].”
BackgroundThe portable proton exchange membrane fuel cell’s forced convection and cooling
Sun, S., Zhang, X.-Y., & Feng, L. (2015) · IEEE International Conference on Multimedia and Expo · doi:10.2991/ic3me-15.2015.440
“The mechanical parameters of the gas flow rate, pressure and others can be obtained in the diffusion layer and catalyst layer by the Darcy’s law; (4) The diffusion and convection of the cathode and the anode are apiece described by a multi-component diffusion equation of Mexwell –Stefan.”
BackgroundMethodThermal Analysis of Multifunctional Satellite Structure-Battery
Wang, Y., & Peng, C. Y. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.450-451.228
“The equation describing the heat generation is given by [14]:”
BackgroundNoble Evaporative Battery Thermal Management System for EVs/HEVs
Rahman, M. A., Ahmed, H., & Hawlader, M. N. A. (2014)
Two dimensional thermal model based observer design for lithium ion batteries
Liu, Z., & Li, H. (2014) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/smc.2014.6974174
Simulation and Analysis of the Temperature Rising for Cylindrical Power Batteries
Peng, L. G., & Li, M. D. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.512-515.982
Thermal Analysis of Lithium-ion Cell Using Equivalent Properties and Lumped Capacitance Method
Lee, H. W., & Park, I. S. (2013) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2013.37.8.775
Intelligent modeling for thermal management of cylindrical lithium ion batteries
Liu, Z., & Li, H. (2013) · International conference on Fuzzy Theory and Its Applications · doi:10.1109/ifuzzy.2013.6825440 · Cited by 1
“The work presented in this paper is partially supported by a GRF grant of GRC in Hong Kong SAR (CityU 116212) and a project from national 973 program (2011CB013104).”
Evaluation of discharge behavior of lithium ion cells
Ali, S. A. H. (2005) · Ionics · doi:10.1007/bf02430251
Giuliano, M. R. (2011) · Library, Museums and Press - UDSpace (University of Delaware)
Thermal Analysis of Li-ion Battery
Fofana, G. H., & Zhang, Y. T. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.401-403.450
Battery Module for Work Machines
Abdul-Quadir, Y., Heikkili, P., Lehmuspelt, T., et al. (2011)
Calorimetric Study of Ni/H2 Thermal Phenomena
Vaidyanathan, H., Kelly, W. H., & Earl, M. (1992) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/929106
Xiao-chan, H. (2012) · Journal of the Automotive Safety and Energy
Xiong, B. (2016) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/66671
“The entropic heat can be expressed as[107],”
Finite Element Analysis on Thermal Effect of Power Lithium Ion Battery for Electrical Vehicle
Jin, B., Xiong, S., & Wei, L. (2016) · International Conference on Measuring Technology and Mechatronics Automation (ICMTMA) · doi:10.1109/icmtma.2016.82
“Chen et al. [4] considering the influence of the convective and radiation heat transfer on the battery surface, established a three-dimensional thermal model based on the heat-producing rate model developed by Bernardi et al [1], and analyzed the influence of depth-ofdischarge (DOD), discharge current, convective heat…”
BackgroundMethodInfluentialA CFD Modeling of Heat Generation and Charge-Discharge Behavior of a Li-ion Secondary Battery
Kang, H., Park, H., Han, K., et al. (2016) · Journal of the Korean Electrochemical Society · doi:10.5229/jkes.2016.19.3.114
“식(2)는 충전될 때의 반응식이고 그 과정은 방전의 역방향으로 진행된다.”
Design, development and analysis of a battery electric vehicle energy storage system
Cheng, C. S. (2017) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/69469
Wang, Z., Siegel, J. B., & Garikipati, K. C. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1609.08944
Dynamic Requirements on LFP Batteries used for Providing Virtual Inertia
Beushausen, L., Benger, R., Gollenstede, J., Werther, B., & Beck, H. (2017) · Springer eBooks · doi:10.1007/978-3-658-15029-7_16
Thermal Management of Lithium/Sulphur Cells Using a Simple 2D Model
Adair, D., Ismailov, K., Massalin, Y., et al. (2016) · Modern Environmental Science and Engineering · doi:10.15341/mese(2333-2581)/04.02.2016/006
“The terms in the original expression [8], namely the “enthalpy of mixing” and “phase change”, were both set to zero, i.”
BackgroundTian, N., Fang, H., & Wang, Y. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1709.08819
“Heat can be generated during charging and discharging due to irreversible overpotential heating, reversible entropic heating from electrochemical reactions, phase change heating, and mixing effects [4].”
BackgroundLithium-ion battery modeling and state-of-charge estimation
Tjandra, R. (2017) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/72699
Gauthier, G. (2018) · UWSpace (University of Waterloo)
Innovative Method for Simultaneous Electrical and Thermal Parametrisation of Automotive Batteries
Grandjean, T. R. B., McGordon, A., & Widanage, W. D. (2017) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2017.8330945
“The heat generation q in the cell is governed by the polarisation heat from joule heating and energy dissipated in the electrode potential [24], given by”
BackgroundHuang, B., Xu, Y., Zheng, X., et al. (2018) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2018-01-1191
Madani, S. S. (2018) · ECS Meeting Abstracts · doi:10.1149/ma2018-01/3/526
“[1] constructed a heat-generation model for battery systems containing the mixing enthalpies, electrochemical reactions and phase changes.”
BackgroundThermal Behavior Analysis of Lithium Ion Cells used in EVs and HEVs
Lonkar, S. G., Jain, A., & Bhalerao, V. (2019) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2019-28-0163
Tahmasbi, A. A. (2019) · Summit (Simon Fraser University)
Xiong, F., Ouyang, C., Zeng, J., et al. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1600/1/012073
Design of a Liquid Cooling Plate for Power Battery Cooling System
Zhang, J., & Li, X. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1601/4/042024
Transient Thermal Analysis on Cell Stack Design for Lithium-Ion Battery Backup Unit in Data Center
Shao, S., Gao, T., Yang, H., et al. (2020) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm45881.2020.9190510
“[2] can be used to describe the heat source in a single lithium-ion cell.”
BackgroundInfluentialYetik, Ö., Tarhan, B., & Karakoç, T. H. (2020) · SAE International Journal of Aerospace · doi:10.4271/01-13-02-0010
Research on Heat Management Performance of Heat Pipe-Fin Based on Optimal Design
Li, C., Tan, G., Ling, H., et al. (2021) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2021-01-0752
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.