A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
“[113] formulated the thermodynamic energy balance on a single cell, and a simplified form (Eq.”
State estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857
Safety focused modeling of lithium-ion batteries: A review
Abada, S., Marlair, G., Lecocq, A., Petit, M., Sauvant-Moynot, V., & Huet, F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.100 · Cited by 819
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
How, D. N. T., Hannan, M. A., Hossain Lipu, M. S., & Ker, P. J. (2019) · IEEE Access · doi:10.1109/access.2019.2942213 · Cited by 812
Dynamic lithium-ion battery model for system simulation
Gao, L., Liu, S., & Dougal, R. A. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2002.803653 · Cited by 794
“The temperature change of the battery is governed by th thermal energy balance [26] described by”
MethodThermal-Electrochemical Modeling of Battery Systems
Gu, W. B., & Wang, C. Y. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393625 · Cited by 746
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Self-citationModeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective
Northrop, P. W. C., De, S., Braatz, R. D., Ramadesigan, V., Northrop, P. W. C., Santhanagopalan, S., & Subramaniana, V. R. (2011) · Cited by 748
Battery Energy Storage System (BESS) and Battery Management System (BMS) for Grid-Scale Applications
Lawder, M. T., Suthar, B., Northrop, P. W. C., De, S., Hoff, C. M., Leitermann, O., Crow, M. L., Santhanagopalan, S., & Subramanian, V. R. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2317451 · Cited by 713
“Starting with a reformulated porous electrode P2-D model explained in Section IV-A, we included equations to model the internal temperature changes during charging and the growth of the SEI layer caused from side reactions at the anode [45], [60], [99].”
MethodThermal analysis of lithium-ion batteries
Chen, S. C., Wan, C. C., & Wang, Y. Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.064 · Cited by 708
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles
Zhao, G., Wang, X., Negnevitsky, M., & Zhang, H. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230001 · Cited by 606
Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.036 · Cited by 592
Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior
Guo, M., Sikha, G., & White, R. E. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3521314 · Cited by 567
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Thermal Analysis of Lithium‐Ion Batteries
Chen, Y., & Evans, J. W. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837095 · Cited by 545
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Electro-thermal modeling and experimental validation for lithium ion battery
Ye, Y., Shi, Y., Cai, N., Lee, J., & He, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.027 · Cited by 438
The use of mathematical modeling in the design of lithium/polymer battery systems
Doyle, M., & Newman, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00162-8 · Cited by 433
Self-citationAnalysis of Electrochemical and Thermal Behavior of Li-Ion Cells
Srinivasan, V., & Wang, C. Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1526512 · Cited by 435
Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales
Kim, G.-H., Smith, K., Lee, K.-J., Santhanagopalan, S., & Pesaran, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3597614 · Cited by 431
Akbarzadeh, M., Kalogiannis, T., Jaguemont, J., Jin, L., Behi, H., Karimi, D., Beheshti, H., Van Mierlo, J., & Berecibar, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117503 · Cited by 431
A review on various temperature-indication methods for Li-ion batteries
Raijmakers, L. H. J., Danilov, D. L., Eichel, R.-A., & Notten, P. H. L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.078 · Cited by 424
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
“To this end, for ISC detection, we explore two phenomenological models: the Equivalent Circuit Model (ECM) [20,21] and the Energy Balance Equation (EBE) proposed by Bernardi, Rao and Newman in [22,23].”
MethodYang, N., Zhang, X., Shang, B., & Li, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.079 · Cited by 378
Sheng, L., Su, L., Zhang, H., Li, K., Fang, Y., Ye, W., & Fang, Y. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.07.033 · Cited by 375
A survey of methods for monitoring and detecting thermal runaway of lithium-ion batteries
Liao, Z., Zhang, S., Li, K., Zhang, G., & Habetler, T. G. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226879 · Cited by 373
Wang, H., Tao, T., Xu, J., Mei, X., Liu, X., & Gou, P. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115591 · Cited by 380
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Operando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors
Huang, J., Albero Blanquer, L., Bonefacino, J., Logan, E. R., Alves Dalla Corte, D., Delacourt, C., Gallant, B. M., Boles, S. T., Dahn, J. R., Tam, H.-Y., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0665-y · Cited by 363
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Self-citationThermal modeling of cylindrical lithium ion battery during discharge cycle
Jeon, D. H., & Baek, S. M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.04.013 · Cited by 352
Lin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
“Reduced order models typically use one single temperature, the bulk (or average) temperature, to capture the lumped thermal dynamics of the cell [4], [5], [6], [7].”
BackgroundAn Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application
Zhang, J., Zhang, L., Sun, F., & Wang, Z. (2018) · IEEE Access · doi:10.1109/access.2018.2824838 · Cited by 344
“[5] to predict the heat generation of LIBs via a thermodynamic energy balance equation.”
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Modeling of lithium-ion batteries
Newman, J., Thomas, K. E., Hafezi, H., & Wheeler, D. R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00282-9 · Cited by 334
Self-citationBattery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Zhang, X., Sastry, A. M., & Shyy, W. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2926617 · Cited by 334
On state-of-charge determination for lithium-ion batteries
Li, Z., Huang, J., Liaw, B. Y., & Zhang, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.001 · Cited by 317
Zhao, C., Cao, W., Dong, T., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.083 · Cited by 311
Kim, T., & Qiao, W. (2011) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2167014 · Cited by 312
Lai, Y., Wu, W., Chen, K., Wang, S., & Xin, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118581 · Cited by 309
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Sturm, J., Rheinfeld, A., Zilberman, I., Spingler, F. B., Kosch, S., Frie, F., & Jossen, A. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.043 · Cited by 300
“[89] Γ Only at the surface of the jelly roll x∗ = x ∈ [0, Lneg ] ∧ [Lneg + Lsep, Lneg + Lsep + Lpos] ** < 0 for cc,- and > 0 cc,+ 47”
BackgroundTorchio, M., Magni, L., Gopaluni, R. B., Braatz, R. D., & Raimondo, D. M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0291607jes · Cited by 300
Choudhari, V. G., Dhoble, D. A. S., & Sathe, T. M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101729 · Cited by 298
A comprehensive review on thermal management systems for power lithium-ion batteries
Zichen, W., & Changqing, D. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110685 · Cited by 294
Thakur, A. K., Prabakaran, R., Elkadeem, M. R., Sharshir, S. W., Arıcı, M., Wang, C., Zhao, W., Hwang, J.-Y., & Saidur, R. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101771 · Cited by 287
Development of redox flow batteries. A historical bibliography
Bartolozzi, M. (1989) · Journal of Power Sources · doi:10.1016/0378-7753(89)80037-0 · Cited by 282
Thermal management of Li-ion battery with liquid metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.054 · Cited by 285
A review on lithium-ion power battery thermal management technologies and thermal safety
An, Z., Jia, L., Ding, Y., Dang, C., & Li, X. (2017) · Journal of Thermal Science · doi:10.1007/s11630-017-0955-2 · Cited by 274
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
Sharma, D. K., & Prabhakar, A. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102885 · Cited by 278
Thermal state monitoring of lithium-ion batteries: Progress, challenges, and opportunities
Zheng, Y., Che, Y., Hu, X., Sui, X., Stroe, D.-I., & Teodorescu, R. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101120 · Cited by 273
Shen, M., & Gao, Q. (2019) · International Journal of Energy Research · doi:10.1002/er.4433 · Cited by 271
“And its calculation can be derived from the battery heat generation expression based on the thermodynamic energy balance proposed by Bernardi et al.(20) The expression took into account the heating process of electrochemical reaction, phase transition, and heat mixing.”
Mohammadian, S. K., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.110 · Cited by 269
Schmidt, A. P., Bitzer, M., Imre, Á. W., & Guzzella, L. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.029 · Cited by 266
van Heerden, A. S. J., Judt, D. M., Jafari, S., Lawson, C. P., Nikolaidis, T., & Bosak, D. (2022) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2021.100767 · Cited by 266
Zhang, W., Liang, Z., Yin, X., & Ling, G. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116380 · Cited by 262
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2015) · Energy · doi:10.1016/j.energy.2014.11.073 · Cited by 262
“The temperature dependence of reaction rate constant follows the Arrhenius formula [13,20,23,26]”
BackgroundMethodDrake, S. J., Martin, M., Wetz, D. A., Ostanek, J. K., Miller, S. P., Heinzel, J. M., & Jain, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.008 · Cited by 249
Coupled Thermal and Water Management in Polymer Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2352039 · Cited by 249
Self-citationModeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
Liu, J., Yadav, S., Salman, M., Chavan, S., & Kim, S. C. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124748 · Cited by 247
Zeng, Y., Chalise, D., Lubner, S. D., Kaur, S., & Prasher, R. S. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.008 · Cited by 239
Wassiliadis, N., Schneider, J., Frank, A., Wildfeuer, L., Lin, X., Jossen, A., & Lienkamp, M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103306 · Cited by 242
Liu, H., Ahmad, S., Shi, Y., & Zhao, J. (2021) · Energy · doi:10.1016/j.energy.2021.120869 · Cited by 239
Development of a theoretically based thermal model for lithium ion battery pack
Zhu, C., Li, X., Song, L., & Xiang, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.035 · Cited by 238
Lai, Y., Du, S., Ai, L., Ai, L., Cheng, Y., Tang, Y., & Jia, M. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.07.079 · Cited by 234
Thermodynamic consistent transport theory of Li-ion batteries
Latz, A., & Zausch, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.088 · Cited by 237
Mathematical modeling of secondary lithium batteries
Botte, G. G., Subramanian, V. R., & White, R. E. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00340-6 · Cited by 235
Patil, M. S., Seo, J.-H., Panchal, S., Jee, S.-W., & Lee, M.-Y. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119728 · Cited by 233
Heats of mixing and of entropy in porous insertion electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00283-0 · Cited by 230
Self-citationA review of novel thermal management systems for batteries
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2018) · International Journal of Energy Research · doi:10.1002/er.4095 · Cited by 224
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Review on battery thermal management systems for energy-efficient electric vehicles
Mali, V., Saxena, R., Kumar, K., Kalam, A., & Tripathi, B. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111611 · Cited by 220
Dan, D., Yao, C., Zhang, Y., Zhang, H., Zeng, Z., & Xu, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114183 · Cited by 219
Power split strategies for hybrid energy storage systems for vehicular applications
Santucci, A., Sorniotti, A., & Lekakou, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.118 · Cited by 220
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
An electrochemical–thermal model based on dynamic responses for lithium iron phosphate battery
Li, J., Cheng, Y., Jia, M., Tang, Y., Lin, Y., Zhang, Z., & Liu, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.007 · Cited by 219
Li, D., Liu, P., Zhang, Z., Zhang, L., Deng, J., Wang, Z., Dorrell, D. G., Li, W., & Sauer, D. U. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3150026 · Cited by 216
“Theheatgenerationundernormaloperationscanbe describedbytheBernardiequation[47],whichcanbedescribed as where V , U oc , U , T , R , and I are the volume, open circuit voltage, terminal voltage, temperature, internal impedance, and charging current, respectively.”
BackgroundA continuum of physics-based lithium-ion battery models reviewed
Brosa Planella, F., Ai, W., Boyce, A. M., Ghosh, A., Korotkin, I., Sahu, S., Sulzer, V, Timms, R., Tranter, T. G., Zyskin, M., et al. (2022) · Progress in Energy · doi:10.1088/2516-1083/ac7d31 · Cited by 217
“In the literature, we find multiple approaches to include thermal transport and temperature effects into electrochemical models [6, 9, 121, 127], and there are already many reviews of the thermal management of lithium-ion batteries, including the various cooling systems [2, 57, 129].”
Wang, C. Y., & Srinivasan, V. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00199-4 · Cited by 217
Kshetrimayum, K. S., Yoon, Y.-G., Gye, H.-R., & Lee, C.-J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113797 · Cited by 216
Heat generation in lithium-ion batteries with different nominal capacities and chemistries
Nazari, A., & Farhad, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.126 · Cited by 209
Wang, Y., Gao, Q., Wang, G., Lu, P., Zhao, M., & Bao, W. (2018) · International Journal of Energy Research · doi:10.1002/er.4158 · Cited by 216
Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow
Zhao, C., Sousa, A. C. M., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.017 · Cited by 214
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.