The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Development of Experimental Techniques for Parameterization of Multi-scale Lithium-ion Battery Models
Open accessAbstract
Presented here, is an extensive 35 parameter experimental data set of a cylindrical 21700 commercial cell (LGM50), for an electrochemical pseudo-two-dimensional (P2D) model. The experimental methodologies for tear-down and subsequent chemical, physical, electrochemical kinetics and thermodynamic analysis, and their accuracy and validity are discussed. Chemical analysis of the LGM50 cell shows that it is comprised of a NMC 811 positive electrode and bi-component Graphite-SiO x negative electrode. The thermodynamic open circuit voltages (OCV) and lithium stoichiometry in the electrode are obtained using galvanostatic intermittent titration technique (GITT) in half cell and three-electrode full cell configurations. The activation energy and exchange current coefficient through electrochemical impedance spectroscopy (EIS) measurements. Apparent diffusion coefficients are estimated using the Sand equation on the voltage transient during the current pulse; an expansion factor was applied to the bi-component negative electrode data to reflect the average change in effective surface area during lithiation. The 35 parameters are applied within a P2D model to show the fit to experimental validation LGM50 cell discharge and relaxation voltage profiles at room temperature. The accuracy and validity of the processes and the techniques in the determination of these parameters are discussed, including opportunities for further modelling and data analysis improvements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,822
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
CasADi: a software framework for nonlinear optimization and optimal control
Andersson, J. A. E., Gillis, J., Horn, G., Rawlings, J. B., & Diehl, M. (2019) · Mathematical Programming Computation · doi:10.1007/s12532-018-0139-4 · Cited by 3,868
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Weppner, W., & Huggins, R. A. (1977) · Journal of The Electrochemical Society · doi:10.1149/1.2133112 · Cited by 1,980
Degradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
He, H., Xiong, R., & Fan, J. (2011) · Energies · doi:10.3390/en4040582 · Cited by 1,180
Thermodynamic and Mass Transport Properties of “ LiAl ”
Wen, C. J., Boukamp, B. A., Huggins, R. A., & Weppner, W. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128939 · Cited by 888
Thermal-Electrochemical Modeling of Battery Systems
Gu, W. B., & Wang, C. Y. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393625 · Cited by 746
Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
Landesfeind, J., Hattendorff, J., Ehrl, A., Wall, W. A., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1141607jes · Cited by 731
Tjaden, B., Cooper, S. J., Brett, D. J., Kramer, D., & Shearing, P. R. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.02.006 · Cited by 532
Schweidler, S., de Biasi, L., Schiele, A., Hartmann, P., Brezesinski, T., & Janek, J. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01873 · Cited by 511
Aurbach, D., Zaban, A., Ein-Eli, Y., Weissman, I., Chusid, O., Markovsky, B., Levi, M., Levi, E., Schechter, A., & Granot, E. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02575-5 · Cited by 502
Suppression of Phase Separation in LiFePO4 Nanoparticles During Battery Discharge
Bai, P., Cogswell, D. A., & Bazant, M. Z. (2011) · Nano Letters · doi:10.1021/nl202764f · Cited by 490
Boosting the Efficiency of Photoelectrolysis by the Addition of Non-Noble Plasmonic Metals: Al & Cu
Jiang, Q., Ji, C., Riley, D. J., & Xie, F. (2018) · Nanomaterials · doi:10.3390/nano9010001 · Cited by 468
Reniers, J. M., Mulder, G., & Howey, D. A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0281914jes · Cited by 462
A Review of Lithium-Ion Battery for Electric Vehicle Applications and Beyond
Chen, W., Liang, J., Yang, Z., & Li, G. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.783 · Cited by 449
Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells
Srinivasan, V., & Wang, C. Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1526512 · Cited by 435
Märker, K., Reeves, P. J., Xu, C., Griffith, K. J., & Grey, C. P. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00140 · Cited by 417
Nyman, A., Behm, M., & Lindbergh, G. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.04.023 · Cited by 382
Waldmann, T., Iturrondobeitia, A., Kasper, M., Ghanbari, N., Aguesse, F., Bekaert, E., Daniel, L., Genies, S., Gordon, I. J., Löble, M. W., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1211609jes · Cited by 328
Tsai, P.-C., Wen, B., Wolfman, M., Choe, M.-J., Pan, M. S., Su, L., Thornton, K., Cabana, J., & Chiang, Y.-M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00001h · Cited by 325
Modeling of lithium ion cells?A simple equivalent-circuit model approach
YANNLIAW, B. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.09.049 · Cited by 319
A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells
Barai, A., Uddin, K., Dubarry, M., Somerville, L., McGordon, A., Jennings, P., & Bloom, I. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.01.001 · Cited by 319
Design Strategies for High Power vs. High Energy Lithium Ion Cells
Lain, M. J., Brandon, J., & Kendrick, E. (2019) · Batteries · doi:10.3390/batteries5040064 · Cited by 302
Self-citationEcker, M., Tran, T. K. D., Dechent, P., Käbitz, S., Warnecke, A., & Sauer, D. U. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551509jes · Cited by 298
Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs
Wu, B., Yufit, V., Marinescu, M., Offer, G. J., Martinez-Botas, R. F., & Brandon, N. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.164 · Cited by 286
X‐Ray Tomography of Porous, Transition Metal Oxide Based Lithium Ion Battery Electrodes
Ebner, M., Geldmacher, F., Marone, F., Stampanoni, M., & Wood, V. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200932 · Cited by 277
Systematic electrochemical characterizations of Si and SiO anodes for high-capacity Li-Ion batteries
Pan, K., Zou, F., Canova, M., Zhu, Y., & Kim, J.-H. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.010 · Cited by 254
Battery Management Systems, Volume I: Battery Modeling
Plett, G. L. (2015) · Cited by 247
Usseglio-Viretta, F. L. E., Colclasure, A., Mistry, A. N., Claver, K. P. Y., Pouraghajan, F., Finegan, D. P., Heenan, T. M. M., Abraham, D., Mukherjee, P. P., Wheeler, D., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0731814jes · Cited by 238
Stiaszny, B., Ziegler, J. C., Krauß, E. E., Schmidt, J. P., & Ivers-Tiffée, E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.080 · Cited by 223
Lee, J.-I., Ko, Y., Shin, M., Song, H.-K., Choi, N.-S., Kim, M. G., & Park, S. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01493j · Cited by 183
Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery
Ecker, M., Käbitz, S., Laresgoiti, I., & Sauer, D. U. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0541509jes · Cited by 178
Schmalstieg, J., Rahe, C., Ecker, M., & Sauer, D. U. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0321816jes · Cited by 170
Newman, J., & Tiedemann, W. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220746 · Cited by 168
A parametric open circuit voltage model for lithium ion batteries
Birkl, C. R., McTurk, E., Roberts, M. R., Bruce, P. G., & Howey, D. A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0331512jes · Cited by 166
Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective
Raccichini, R., Amores, M., & Hinds, G. (2019) · Batteries · doi:10.3390/batteries5010012 · Cited by 166
Effect of Calendering on Electrode Wettability in Lithium-Ion Batteries
Sheng, Y., Fell, C. R., Son, Y. K., Metz, B. M., Jiang, J., & Church, B. C. (2014) · Frontiers in Energy Research · doi:10.3389/fenrg.2014.00056 · Cited by 148
Micro-Scale Modeling of Li-Ion Batteries: Parameterization and Validation
Less, G. B., Seo, J. H., Han, S., et al. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.096205jes · Cited by 144
Zhu, W., Huang, X., Liu, T., Xie, Z., Wang, Y., Tian, K., Bu, L., Wang, H., Gao, L., & Zhao, J. (2019) · Coatings · doi:10.3390/coatings9020092 · Cited by 142
Zhang, L., Lyu, C., Hinds, G., Wang, L., Luo, W., Zheng, J., & Ma, K. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.048405jes · Cited by 126
Yan, B., Lim, C., Yin, L., et al. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.024210jes · Cited by 125
Visualizing the Carbon Binder Phase of Battery Electrodes in Three Dimensions
Daemi, S. R., Tan, C., Volkenandt, T., Cooper, S. J., Palacios-Padros, A., Cookson, J., Brett, D. J. L., & Shearing, P. R. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00501 · Cited by 122
Edouard, C., Petit, M., Forgez, C., Bernard, J., & Revel, R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.030 · Cited by 118
X-ray micro-computed tomography and tortuosity calculations of percolating pore networks
Shanti, N. O., Chan, V. W. L., Stock, S. R., Carlo, F. D., Thornton, K. S., & Faber, K. T. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.03.003 · Cited by 113
Chang, Y., Jong, J.-H., & Fey, G. T. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393481 · Cited by 111
FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery
Hutzenlaub, T., Asthana, A., Becker, J., Wheeler, D. R., Zengerle, R., & Thiele, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.11.006 · Cited by 105
Vacuum Deposition Onto Webs, Films and Foils
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-14249-3 · Cited by 99
Widanage, W. D., Barai, A., Chouchelamane, G., Uddin, K., McGordon, A., Marco, J., & Jennings, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.014 · Cited by 90
Self-citationLi, L., Li, X., Wang, Z., Guo, H., Peng, Y., Chen, W., & Wu, L. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.07.148 · Cited by 74
Three-dimensional conductive network formed by carbon nanotubes in aqueous processed NMC electrode
Du, Z., Li, J., Wood, M., Mao, C., Daniel, C., & Wood, D. L. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.03.063 · Cited by 67
Battery state-of-charge estimation using approximate least squares
Unterrieder, C., Zhang, C., Lunglmayr, M., Priewasser, R., Marsili, S., & Huemer, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.035 · Cited by 51
Parameterization and Validation of an Electrochemical Thermal Model of a Lithium-Ion Battery
Liebig, G., Gupta, G., Kirstein, U., Schuldt, F., & Agert, C. (2019) · Batteries · doi:10.3390/batteries5030062 · Cited by 42
Recovery of Li(Ni0.33Mn0.33Co0.33)O2 from Lithium-Ion Battery Cathodes: Aspects of Degradation
Sieber, T., Ducke, J., Rietig, A., Langner, T., & Acker, J. (2019) · Nanomaterials · doi:10.3390/nano9020246 · Cited by 33
Reproducibility of Li-ion cell reassembling processes and their influence on coin cell aging
Schmid, A. U., Kurka, M., & Birke, K. P. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.04.006 · Cited by 28
Rashid, M., Pathan, T. S., McGordon, A., Kendrick, E., & Widanage, W. D. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227153 · Cited by 12
Self-citation
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review
Meddings, N., Heinrich, M., Overney, F., Lee, J.-S., Ruiz, V., Napolitano, E., Seitz, S., Hinds, G., Raccichini, R., Gaberšček, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228742 · Cited by 885
A non-academic perspective on the future of lithium-based batteries
Frith, J. T., Lacey, M. J., & Ulissi, U. (2023) · Nature Communications · doi:10.1038/s41467-023-35933-2 · Cited by 820
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
Self-citation
Metadata
- Authors
- Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2020-01-05
- Volume
- 167
- Issue
- 8
- Pages
- 080534
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3023537476
- Cited by
- 610
- References
- 65
- FWCI
- 20.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.