Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 61 of the 67 references it cites were found in a registry or an index; 59 of the 89 sources its claims cite were checked for support.

Integrated information theory (IIT) 4.0: Formulating the properties of phenomenal existence in physical terms

Open access

Abstract

This paper presents Integrated Information Theory (IIT) 4.0. IIT aims to account for the properties of experience in physical (operational) terms. It identifies the essential properties of experience (axioms), infers the necessary and sufficient properties that its substrate must satisfy (postulates), and expresses them in mathematical terms. In principle, the postulates can be applied to any system of units in a state to determine whether it is conscious, to what degree, and in what way. IIT offers a parsimonious explanation of empirical evidence, makes testable predictions concerning both the presence and the quality of experience, and permits inferences and extrapolations. IIT 4.0 incorporates several developments of the past ten years, including a more accurate formulation of the axioms as postulates and mathematical expressions, the introduction of a unique measure of intrinsic information that is consistent with the postulates, and an explicit assessment of causal relations. By fully unfolding a system's irreducible cause-effect power, the distinctions and relations specified by a substrate can account for the quality of experience.

Overview

CoChat Summary

## TL;DR

This paper presents IIT 4.0, a mathematical framework that defines consciousness as a substrate’s intrinsic cause–effect power, characterized by a maximal substrate (a complex) and its unfolded Φ-structure. Using simple example networks, the authors illustrate how connectivity, state, and architecture determine whether a system can support consciousness and what kind of experience it specifies.

## Key findings

  • IIT 4.0 formalizes five phenomenal axioms as physical postulates: existence, intrinsicality, information, integration, exclusion, and composition; a conscious substrate must take and make a difference within itself, be specific, irreducible, definite, and structured.
  • In example networks, bottlenecks and degeneracy keep complexes small and Φ low, while weakly connected modules split into separate complexes; for the 6-unit copy cycle, the paper reports a maximal φs = 1.74 ibits but low Φ = 7.65 because the Φ-structure contains only first-order distinctions.
  • A specialized 6-unit lattice produced 27 distinctions out of 63 possible distinctions, yielding a much richer Φ-structure than the copy cycle.
  • In the activity example, changing one unit’s state altered the Φ-structure substantially; when a unit was inactivated rather than merely inactive, its compound Φ-fold collapsed and the complex shrank.
  • In the functional equivalence example, three systems with the same input–output function and equivalent global dynamics nonetheless had different Φ-structures: one had Φ = 21.01 ibits, another had Φ = 3.64 ibits, and the third was reducible with φs = 0 ibits.

## Methods

  • The paper develops a mathematical formalism for IIT 4.0 based on a substrate’s transition probability matrix (TPM), then applies it to idealized binary networks in the Results and discussion.
  • It identifies maximal cause–effect states using intrinsic information, then computes system integrated information (φs) via minimum partitions (MIPs), selects maximal substrates (complexes) by maximal φs, and unfolds cause–effect structures into distinctions and relations to obtain Φ.
  • The worked examples use simple simulated systems of 5–6 binary units, analyzed with the “iit-4.0” feature branch of PyPhi.

## Limitations

  • The authors state that a full analysis of complexes and their cause–effect structure is not feasible for realistic systems because exhaustive observations, manipulations, and calculations face multiple nested combinatorial explosions.
  • They note that the framework is illustrated on extremely simple, simulated networks rather than actual substrates, so the examples are explanatory demonstrations rather than empirical analyses.
  • They explicitly say IIT 4.0 is “work in progress,” and that some algorithmic choices remain open to further evaluation, including treatment of background conditions and tie resolution under TPM symmetries.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1371/journal.pcbi.1011465

Cites

61 of 62 references verified1 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig 1 Identifying substrates of consciousness through the postulates of existence, intrinsicality, information, integration, and exclusion. (A) The substrate S = aBC in state (−1, 1, 1) (lowercase letters for units indicated state “−1,” uppercase letters state “+1”) is the starting point for applying the postulates. The substrate updates its state according to the depicted transition probability matrix (TPM) (gray shading indicates probability value from white (p = 0) to black (p = 1); each unit follows a logistic equation (see “Results” for definition) with k = 4.0 and connection weights as indicated in the causal model). Existence requires that the substrate must have cause–effect power, meaning that the TPM among substrate states must differ from chance. (B) Intrinsicality requires that a candidate substrate, for example, units aB, has cause–effect power over itself. Units outside the candidate substrate (in this case, unit C) are treated as background conditions. The corresponding cause and effect TPMs (Tc and Te) of system aB are depicted on the right. (C) Information requires that the candidate substrate aB selects a specific cause–effect state (s′). This is the cause state (red) and effect state (green) for which intrinsic information (ii) is maximal. Bar plots on the right indicate the three probability terms relevant for computing iic (7) and iie (5): the selectivity (light colored bar), as well as the constrained (dark colored bar) and unconstrained (gray bar) effect probabilities in the informativeness term. (D) Integration requires that the substrate specifies its cause–effect state irreducibly (“as one”). This is established by identifying the minimum partition (MIP; θ′) and measuring the integrated information of the system (φs)—the minimum between cause integrated information (φc) and effect integrated information (φe). Here, gray bars represent the partitioned probability required for computing φc (20) and φe (19). (E) Exclusion requires that the substrate of consciousness is definite, including some units and excluding others. This is established by identifying the candidate substrate with the maximum value of system integrated information (φs^(*))—the maximal substrate, or complex. In this case, aB is a complex since its system integrated information (φs = 0.17) is higher than that of all other overlapping systems (for example, subset a with φs = 0.04 and superset aBC with φs = 0.13).
Fig 1 Identifying substrates of consciousness through the postulates of existence, intrinsicality, information, integration, and exclusion. (A) The substrate S = aBC in state (−1, 1, 1) (lowercase letters for units indicated state “−1,” uppercase letters state “+1”) is the starting point for applying the postulates. The substrate updates its state according to the depicted transition probability matrix (TPM) (gray shading indicates probability value from white (p = 0) to black (p = 1); each unit follows a logistic equation (see “Results” for definition) with k = 4.0 and connection weights as indicated in the causal model). Existence requires that the substrate must have cause–effect power, meaning that the TPM among substrate states must differ from chance. (B) Intrinsicality requires that a candidate substrate, for example, units aB, has cause–effect power over itself. Units outside the candidate substrate (in this case, unit C) are treated as background conditions. The corresponding cause and effect TPMs (Tc and Te) of system aB are depicted on the right. (C) Information requires that the candidate substrate aB selects a specific cause–effect state (s′). This is the cause state (red) and effect state (green) for which intrinsic information (ii) is maximal. Bar plots on the right indicate the three probability terms relevant for computing iic (7) and iie (5): the selectivity (light colored bar), as well as the constrained (dark colored bar) and unconstrained (gray bar) effect probabilities in the informativeness term. (D) Integration requires that the substrate specifies its cause–effect state irreducibly (“as one”). This is established by identifying the minimum partition (MIP; θ′) and measuring the integrated information of the system (φs)—the minimum between cause integrated information (φc) and effect integrated information (φe). Here, gray bars represent the partitioned probability required for computing φc (20) and φe (19). (E) Exclusion requires that the substrate of consciousness is definite, including some units and excluding others. This is established by identifying the candidate substrate with the maximum value of system integrated information (φs^(*))—the maximal substrate, or complex. In this case, aB is a complex since its system integrated information (φs = 0.17) is higher than that of all other overlapping systems (for example, subset a with φs = 0.04 and superset aBC with φs = 0.13).CC BY · PubMed Central
Fig 2 Composition and causal distinctions. Identifying the irreducible causal distinctions specified by a substrate in a state requires evaluating the specific causes and effects of every system subset. The candidate substrate is constituted of two interacting units S = aB (see Fig 1) with TPMs Te and Tc as shown. In addition to the two first-order mechanisms a and B, the second-order mechanism aB specifies its own irreducible cause and effect, as indicated by φd > 0.
Fig 2 Composition and causal distinctions. Identifying the irreducible causal distinctions specified by a substrate in a state requires evaluating the specific causes and effects of every system subset. The candidate substrate is constituted of two interacting units S = aB (see Fig 1) with TPMs Te and Tc as shown. In addition to the two first-order mechanisms a and B, the second-order mechanism aB specifies its own irreducible cause and effect, as indicated by φd > 0.CC BY · PubMed Central
Fig 3 Composition of intrinsic effects. From the intrinsic perspective of the system, a specific cause or effect is only available to the system if it is selected by a causal distinction d ∈ D(s). In (A), only the top-order effect is specified. From the intrinsic perspective, the system cannot distinguish the individual units. In (B), only first-order effects are specified. The system has no “handle” to select all three units together. (C) If both first- and third-order effects are specified, but no second-order effects, the system can distinguish individual units and select them together, but has no way of ordering them sequentially. (D) The system can distinguish individual units, select them altogether, as well as order them sequentially, in the sense that it has a handle for ab and bc, but not ac. The ordering becomes apparent once the relations among the distinctions are considered (see below, Fig 5).
Fig 3 Composition of intrinsic effects. From the intrinsic perspective of the system, a specific cause or effect is only available to the system if it is selected by a causal distinction d ∈ D(s). In (A), only the top-order effect is specified. From the intrinsic perspective, the system cannot distinguish the individual units. In (B), only first-order effects are specified. The system has no “handle” to select all three units together. (C) If both first- and third-order effects are specified, but no second-order effects, the system can distinguish individual units and select them together, but has no way of ordering them sequentially. (D) The system can distinguish individual units, select them altogether, as well as order them sequentially, in the sense that it has a handle for ab and bc, but not ac. The ordering becomes apparent once the relations among the distinctions are considered (see below, Fig 5).CC BY · PubMed Central
Fig 4 Composition and causal relations. Relations between distinctions specify joint causes and/or effects. The two distinctions d(a) and d(aB) each specify their own cause and effect. In this example, their cause and effect purviews overlap over the unit b and are congruent, which means that they all specify b to be in state “-1.” The relation r({a, aB}) thus binds the two distinctions together over the same unit. Relation faces are indicated by the blue lines and surfaces between the distinctions’ causes and/or effects (different shades are used to individuate the faces). Because all four purviews overlap over the same unit, all nine possible faces exist. Note that the fact that the two distinctions overlap irreducibly can only be captured by a relation and not by a high-order distinction.
Fig 4 Composition and causal relations. Relations between distinctions specify joint causes and/or effects. The two distinctions d(a) and d(aB) each specify their own cause and effect. In this example, their cause and effect purviews overlap over the unit b and are congruent, which means that they all specify b to be in state “-1.” The relation r({a, aB}) thus binds the two distinctions together over the same unit. Relation faces are indicated by the blue lines and surfaces between the distinctions’ causes and/or effects (different shades are used to individuate the faces). Because all four purviews overlap over the same unit, all nine possible faces exist. Note that the fact that the two distinctions overlap irreducibly can only be captured by a relation and not by a high-order distinction.CC BY · PubMed Central
Fig 5 Structuring of intrinsic effects by relations. (A) A single undifferentiated effect has no relations. (B) Likewise, there are no relations among multiple non-overlapping effects. (C) The set of three first-order effects and one third-order effect supports three relations, which bind the effects together. (D) The set of first, second, and third-order effects supports a large number of relations (ten 2-relations (between two effects), six 3-relations, and one 4-relation), which bind the effects in a structure that is ordered sequentially.
Fig 5 Structuring of intrinsic effects by relations. (A) A single undifferentiated effect has no relations. (B) Likewise, there are no relations among multiple non-overlapping effects. (C) The set of three first-order effects and one third-order effect supports three relations, which bind the effects together. (D) The set of first, second, and third-order effects supports a large number of relations (ten 2-relations (between two effects), six 3-relations, and one 4-relation), which bind the effects in a structure that is ordered sequentially.CC BY · PubMed Central
Fig 6 Causal powers analysis of various network architectures. Each panel shows the network’s causal model and weights on the left. Blue regions indicate complexes with their respective φs values. In all networks, k = 4 and the state is Abcdef. The Φ-structure(s) specified by the network’s complexes are illustrated to the right (with only second- and third-degree relation faces depicted) with a list of their distinctions for smaller systems and their ∑φ values for those systems with many distinctions and relations. All integrated information values are in ibits. (A) A degenerate network in which unit A forms a bottleneck with redundant inputs from and outputs to the remaining units. The first-maximal complex is Ab, which excludes all other subsets with φs > 0 except for the individual units c, d, e, and f. (B) The modular network condenses into three complexes along its fault lines (which exclude all subsets and supersets), each with a maximal φs value, but low Φ, as the modules each specify only two or three distinctions and at most five relations. (C) A directed cycle of six units forms a six-unit complex with φs = 1.74 ibits, as no other subset is integrated. However, the Φ-structure of the directed cycle is composed of only first-order distinctions and few relations. (D) A specialized lattice also forms a complex (which excludes all subsets), but specifies 27 first- and high-order distinctions, with many relations (>1.5 × 106) among them. Its Φ value is 11452 ibits. (E) A slightly modified version of the specialized lattice in which the first-maximal complex is Abef. The full system is not maximally irreducible and is excluded as a complex, despite its positive φs value (indicated in gray).
Fig 6 Causal powers analysis of various network architectures. Each panel shows the network’s causal model and weights on the left. Blue regions indicate complexes with their respective φs values. In all networks, k = 4 and the state is Abcdef. The Φ-structure(s) specified by the network’s complexes are illustrated to the right (with only second- and third-degree relation faces depicted) with a list of their distinctions for smaller systems and their ∑φ values for those systems with many distinctions and relations. All integrated information values are in ibits. (A) A degenerate network in which unit A forms a bottleneck with redundant inputs from and outputs to the remaining units. The first-maximal complex is Ab, which excludes all other subsets with φs > 0 except for the individual units c, d, e, and f. (B) The modular network condenses into three complexes along its fault lines (which exclude all subsets and supersets), each with a maximal φs value, but low Φ, as the modules each specify only two or three distinctions and at most five relations. (C) A directed cycle of six units forms a six-unit complex with φs = 1.74 ibits, as no other subset is integrated. However, the Φ-structure of the directed cycle is composed of only first-order distinctions and few relations. (D) A specialized lattice also forms a complex (which excludes all subsets), but specifies 27 first- and high-order distinctions, with many relations (>1.5 × 106) among them. Its Φ value is 11452 ibits. (E) A slightly modified version of the specialized lattice in which the first-maximal complex is Abef. The full system is not maximally irreducible and is excluded as a complex, despite its positive φs value (indicated in gray).CC BY · PubMed Central
Fig 7 Causal powers analysis of the same system with one of its units set to active, inactive, or inactivated. In all panels, the same causal model and weights are shown on the left, but in different states. For all networks k = 4. The set of distinctions D s), their causes and effects, and their φd values are shown in the middle. The Φ-structure specified by the network’s complex is illustrated on the right (again with only second- and third-degree relation faces depicted). All integrated information values are in ibits. (A) The system in state ABcdE is a complex with 23 out of 31 distinctions and Φ = 22.26. (B) The same system in state ABcde, where unit E is inactive (“OFF”) also forms a complex with the same number of distinctions, but a somewhat lower Φ value due to a lower number of relations between distinctions. In addition, the system’s Φ-structure differs from that in (A), as the system now specifies a different set of compositional causes and effects. (C) If instead of being inactive, unit E is inactivated (fixed into the “OFF” state), the inactivated unit cannot contribute to the complex or Φ-structure anymore. The complex is now constituted of four units (ABcd), with only 14 distinctions and markedly reduced structure integrated information (Φ = 3.35).
Fig 7 Causal powers analysis of the same system with one of its units set to active, inactive, or inactivated. In all panels, the same causal model and weights are shown on the left, but in different states. For all networks k = 4. The set of distinctions D s), their causes and effects, and their φd values are shown in the middle. The Φ-structure specified by the network’s complex is illustrated on the right (again with only second- and third-degree relation faces depicted). All integrated information values are in ibits. (A) The system in state ABcdE is a complex with 23 out of 31 distinctions and Φ = 22.26. (B) The same system in state ABcde, where unit E is inactive (“OFF”) also forms a complex with the same number of distinctions, but a somewhat lower Φ value due to a lower number of relations between distinctions. In addition, the system’s Φ-structure differs from that in (A), as the system now specifies a different set of compositional causes and effects. (C) If instead of being inactive, unit E is inactivated (fixed into the “OFF” state), the inactivated unit cannot contribute to the complex or Φ-structure anymore. The complex is now constituted of four units (ABcd), with only 14 distinctions and markedly reduced structure integrated information (Φ = 3.35).CC BY · PubMed Central
Fig 8 Functionally equivalent networks with different Φ-structures. (A) The input–output function realized by three different systems (shown in (C)): a count of eight instances of input I = 1 leads to output O = 1. (B) The global state-transition diagram is also the same for the three systems: if I = 0, the systems will remain in their current global state, labeled as 0–7; if I = 1, the systems will move one state forward, cycling through their global states, and activate the output if S = 0. (C) Three systems constituted of three binary units but differing in how the units are connected and interact. As a consequence, the one-to-one mapping between the 3-bit binary states and the global state labels differ. However, all three systems initially transition from 000 to 100 to 010. Analyzed in state 100, the first system (top) turns out to be a single complex that specifies a Φ-structure with six distinctions and many relations, yielding a high value of Φ. The second system (middle) is also a complex, with the same φs value, but it specifies a Φ-structure with fewer distinctions and relations, yielding a lower value of Φ. Finally, the third system (bottom) is reducible (φs = 0) and splits into three smaller complexes (entities) with minimal Φ-structures and low Φ.
Fig 8 Functionally equivalent networks with different Φ-structures. (A) The input–output function realized by three different systems (shown in (C)): a count of eight instances of input I = 1 leads to output O = 1. (B) The global state-transition diagram is also the same for the three systems: if I = 0, the systems will remain in their current global state, labeled as 0–7; if I = 1, the systems will move one state forward, cycling through their global states, and activate the output if S = 0. (C) Three systems constituted of three binary units but differing in how the units are connected and interact. As a consequence, the one-to-one mapping between the 3-bit binary states and the global state labels differ. However, all three systems initially transition from 000 to 100 to 010. Analyzed in state 100, the first system (top) turns out to be a single complex that specifies a Φ-structure with six distinctions and many relations, yielding a high value of Φ. The second system (middle) is also a complex, with the same φs value, but it specifies a Φ-structure with fewer distinctions and relations, yielding a lower value of Φ. Finally, the third system (bottom) is reducible (φs = 0) and splits into three smaller complexes (entities) with minimal Φ-structures and low Φ.CC BY · PubMed Central

Verification

Claims the paper makes

42 Valid · 6 Not valid · 11 Not checked · 195 Own results and interpretations

147 more claims · 30 with their cited sources checked

Create a free account to see all 254 claims and to verify the 1 reference still open.

See all claims — free account
  • Probably not a substantial claim. 63
  • It may state two separate claims as one. 58
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

19 more claims about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Citations

Cites

Show all 67 references

Research works printed but not linked: 2

  1. Findlay G, Marshall W, Albantakis L, Mayner WGP, Koch C, Tononi G. Dissociating Intelligence from Consciousness in Artificial Systems – Implications of Integrated Information Theory. In: Proceedings of the 2019 Towards Conscious AI Systems Symposium, AAAI SSS19; 2019 and forthcoming.
  2. Zanardi P, Tomka M, Venuti LC. Towards Quantum Integrated Information Theory. arXiv. 2018;1806.01421.

Cited by

See all 292

Metadata

Authors
Albantakis, L., Barbosa, L., Findlay, G., Grasso, M., Haun, A. M., Marshall, W., Mayner, W. G. P., Zaeemzadeh, A., Boly, M., Juel, B. E., Sasai, S., Fujii, K., David, I., Hendren, J., Lang, J. P., & Tononi, G.
Affiliations
University of Wisconsin–Madison (US)
Corresponding author
Tononi, Giulio
Venue
PLoS Computational Biology
Published
2023-10-17
Volume
19
Issue
10
Pages
e1011465
ISSN
  • 1553-734X (ISSN-L)
  • 1553-7358
OpenAlex
W4387700987
Cited by
292
References
67
Citations by year
2026: 104 · 2025: 92 · 2024: 64 · 2023: 31
FWCI
75.00
Type
journal article
Language
en
Open access
Locations
  • PLoS Computational Biology (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • NORA - Norwegian Open Research Archives (submittedVersion, cc-by)
  • arXiv (Cornell University) (cc-by)
Funders
  • Templeton World Charity Foundation (TWCF0216, TWCF-2020-20526)
  • Tiny Blue Dot Foundation (UW 133AAG3451)
  • National Research Council Canada (RGPIN-2019-05418)
Topics
  • Social Sciences › Arts and Humanities › Philosophy › Philosophy and Theoretical Science
  • Life Sciences › Neuroscience › Cognitive Neuroscience › Embodied and Extended Cognition
  • Social Sciences › Arts and Humanities › History and Philosophy of Science › Philosophy of Biology and Scientific Explanation
Keywords
integrated information theory, consciousness, phenomenal experience, intrinsic information, causal relationship, quality of experience
MeSH terms
Brain, Consciousness, Information Theory, Models, Neurological

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Integrated information theory (IIT) 4.0: Formulating the properties of phenomenal existence in physical terms. https://app.cochat.ai/papers/10.1371/journal.pcbi.1011465
The paper
Albantakis, L., Barbosa, L., Findlay, G., Grasso, M., Haun, A. M., Marshall, W., Mayner, W. G. P., Zaeemzadeh, A., Boly, M., Juel, B. E., Sasai, S., Fujii, K., David, I., Hendren, J., Lang, J. P., & Tononi, G. (2023). Integrated information theory (IIT) 4.0: Formulating the properties of phenomenal existence in physical terms. PLoS Computational Biology. https://doi.org/10.1371/journal.pcbi.1011465

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.