Selective laser sintering fabrication of nano-hydroxyapatite/poly-ε-caprolactone scaffolds for bone tissue engineering applications
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The regeneration of functional tissue in osseous defects is a formidable challenge in orthopedic surgery. In the present study, a novel biomimetic composite scaffold, here called nano-hydroxyapatite (HA)/poly-ε-caprolactone (PCL) was fabricated using a selective laser sintering technique. The macrostructure, morphology, and mechanical strength of the scaffolds were characterized. Scanning electronic microscopy (SEM) showed that the nano-HA/PCL scaffolds exhibited predesigned, well-ordered macropores and interconnected micropores. The scaffolds have a range of porosity from 78.54% to 70.31%, and a corresponding compressive strength of 1.38 MPa to 3.17 MPa. Human bone marrow stromal cells were seeded onto the nano-HA/PCL or PCL scaffolds and cultured for 28 days in vitro. As indicated by the level of cell attachment and proliferation, the nano-HA/PCL showed excellent biocompatibility, comparable to that of PCL scaffolds. The hydrophilicity, mineralization, alkaline phosphatase activity, and Alizarin Red S staining indicated that the nano-HA/PCL scaffolds are more bioactive than the PCL scaffolds in vitro. Measurements of recombinant human bone morphogenetic protein-2 (rhBMP-2) release kinetics showed that after nano-HA was added, the material increased the rate of rhBMP-2 release. To investigate the in vivo biocompatibility and osteogenesis of the composite scaffolds, both nano-HA/PCL scaffolds and PCL scaffolds were implanted in rabbit femur defects for 3, 6, and 9 weeks. The wounds were studied radiographically and histologically. The in vivo results showed that both nano-HA/PCL composite scaffolds and PCL scaffolds exhibited good biocompatibility. However, the nano-HA/PCL scaffolds enhanced the efficiency of new bone formation more than PCL scaffolds and fulfilled all the basic requirements of bone tissue engineering scaffolds. Thus, they show large potential for use in orthopedic and reconstructive surgery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240607 · Cited by 3,836
Osteoinductive ceramics as a synthetic alternative to autologous bone grafting
Yuan, H., Fernandes, H., Habibovic, P., de Boer, J., Barradas, A. M. C., de Ruiter, A., Walsh, W. R., van Blitterswijk, C. A., & de Bruijn, J. D. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003600107 · Cited by 746 · cited 1×
“These challenges have limited their clinical application.(3,4)”
Cited by
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Bone regenerative medicine: classic options, novel strategies, and future directions
Oryan, A., Alidadi, S., Moshiri, A., & Maffulli, N. (2014) · Journal of Orthopaedic Surgery and Research · doi:10.1186/1749-799x-9-18 · Cited by 1,234
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Biodegradable materials for bone defect repair
Wei, S., Ma, J.-X., Xu, L., Gu, X.-S., & Ma, X.-L. (2020) · Military Medical Research · doi:10.1186/s40779-020-00280-6 · Cited by 406
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Recent advances in 3D printing of porous ceramics: A review
Hwa, L. C., Rajoo, S., Noor, A. M., Ahmad, N., & Uday, M. B. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.08.002 · Cited by 343
Du, Y., Liu, H., Yang, Q., Wang, S., Wang, J., Ma, J., Noh, I., Mikos, A. G., & Zhang, S. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.05.021 · Cited by 322
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
Powder-based 3D printing for bone tissue engineering
Brunello, G., Sivolella, S., Meneghello, R., Ferroni, L., Gardin, C., Piattelli, A., Zavan, B., & Bressan, E. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.03.009 · Cited by 296
Strategies for Bone Regeneration: From Graft to Tissue Engineering
Battafarano, G., Rossi, M., De Martino, V., Marampon, F., Borro, L., Secinaro, A., & Del Fattore, A. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031128 · Cited by 295
Zhang, Y., Xie, Y., Hao, Z., Zhou, P., Wang, P., Fang, S., Li, L., Xu, S., & Xia, Y. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c22671 · Cited by 271
Self-citation3D printing applications in bone tissue engineering
Haleem, A., Javaid, M., Khan, R. H., & Suman, R. (2020) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2019.12.002 · Cited by 253
A review on 3D printed matrix polymer composites: its potential and future challenges
Saroia, J., Wang, Y., Wei, Q., Lei, M., Li, X., Guo, Y., & Zhang, K. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04534-z · Cited by 253
Kumar, A., Kargozar, S., Baino, F., & Han, S. S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00313 · Cited by 189
Metadata
- Authors
- Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C.
- Venue
- International Journal of Nanomedicine
- Publisher
- Informa UK Limited
- Published
- 2013-11
- Volume
- 8
- Pages
- 4197
- ISSN
- 1176-9114 (ISSN-L)
- 1178-2013
- OpenAlex
- W2044180273
- Cited by
- 146
- References
- 2
- FWCI
- 4.61
- Type
- journal article
- Language
- en
- Status
- Retracted
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.