The DOI matches its Crossref record; 84 of the 85 references it cites were found in a registry or an index; 30 of the 40 sources its claims cite were checked for support.
Molecular dynamics simulation of an entire cell
Open accessAbstract
The ultimate microscope, directed at a cell, would reveal the dynamics of all the cell’s components with atomic resolution. In contrast to their real-world counterparts, computational microscopes are currently on the brink of meeting this challenge. In this perspective, we show how an integrative approach can be employed to model an entire cell, the minimal cell, JCVI-syn3A, at full complexity. This step opens the way to interrogate the cell’s spatio-temporal evolution with molecular dynamics simulations, an approach that can be extended to other cell types in the near future.
Overview
CoChat Summary
TL;DR
The paper presents an integrative Martini coarse-grained model of the entire minimal cell JCVI-syn3A, comprising 561 million beads representing more than six billion atoms. It is a proof-of-principle construction and roadmap toward whole-cell molecular dynamics, but an actual MD simulation of the full cell has not yet been performed.
Key findings
- A complete Martini model of JCVI-syn3A was built with 561 million CG beads, representing >6 billion atoms, including 60,887 soluble proteins, 2,200 membrane proteins, 503 ribosomes, a 543 kbp circular dsDNA, 1.3 million lipids, 1.7 million metabolites, 14 million ions, and 447 million water beads.
- The model integrates experimental and computational data—cryo-electron tomography, proteomics, metabolomics, lipidomics, and AlphaFold2 structures—using Martini ecosystem tools: Polyply, Martinize2, TS2CG, and Bentopy.
- The authors report that running the full-cell MD simulation is currently non-trivial because Gromacs has difficulties handling hundreds of millions of particles, especially with large molecules such as the genome spread over multiple domains; ddcMD and OpenMM are suggested alternatives.
- They anticipate reaching 10–100 µs timescales in the foreseeable future, which would still be insufficient to equilibrate an entire cell, so generated ensembles would remain dependent on the starting state.
Methods
- This is a perspective/integrative modeling study: experimental data from cryoET, cryo-EM, -omics, and a prior whole-cell kinetic model inform construction of the in silico cell.
- The chromosome was modeled as a fractal globule, relaxed with Brownian dynamics, and backmapped to a Martini one-bead-per-base-pair representation using Polyply; cytosolic proteins were packed with Bentopy; the membrane was built with TS2CG; and the system was solvated in a rhombic dodecahedron with 135 mM NaCl.
- No production MD simulation of the full cell is reported; the paper describes the construction workflow and prospects for future simulation.
Limitations
- Stated: the model uses Martini 2 because Martini 3 models for nucleic acids and other essential components are still under development; Martini cannot sample protein secondary conformational changes, and protein–protein/protein–lipid interaction details may be affected.
- Stated: the cytosol includes only a subset of metabolites (1.7 million metabolites, about 55% of the complete metabolome), AlphaFold2 provided only monomeric protein structures, and multimeric proteins such as ribosomes and membrane transport complexes are omitted or represented by homologs.
- Stated and evident: solvent/ion and lipid-leaflet balance is non-trivial and may cause osmotic or curvature stress; whole-cell equilibration is not achievable at expected timescales; classical MD cannot capture non-reactive, out-of-equilibrium cellular processes, and the model reflects average steady-state concentrations.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![FIGURE 1 Integrative modeling workflow for building in silico whole-cell models. The initial step consists of collecting experimental data to inform the in silico modeling. Data from CryoET images [Image from EMD-23661 by Lam and Villa ref. (Gilbert et al., 2021)], Cryo-EM protein structures and -Omics experiments are incorporated into our cell models. The second stage in the workflow concerns mesoscale modeling. Here a kinetic model of the whole JCVI-syn3A [Image ref. (Thornburg et al., 2022) is used to gain quantitative insights into cellular processes and composition. As part of the final step, Martini models of the cellular components are generated using tools in the Martini ecosystem: Polyply, Martinize2, and TS2CG (Image ref. (Pezeshkian et al., 2020)]. Lastly, Bentopy facilitates the assembly of the individual molecular components in their appropriate abundances into the final molecular-resolution whole-cell model.](/paper-figures/1486f3d916054ce1880a3590270d1ae2/molecular-dynamics-simulation-of-an-entire-cell-figure-1.jpg)

Verification
Claims the paper makes
22 Valid · 6 Not valid · 6 Not checked · 31 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The nucleoid structure of Syn3A was previously modeled by Gilbert et al. (2021) based on the ribosome distribution and cell boundary determined by cryo-electron tomography.”
§ Molecular dynamics simulation of an entire cell > Building cells with the Martini ecosystem > Chromosome building
What the sources say
- Supportedcites Gilbert et al., 2021 source
Methods §2.2 says the Syn3A chromosome model was designed to match the cell boundary and ribosome distribution. The Abstract and Figure 1 workflow state that these constraints came from cryo-electron tomograms and were used to generate chromosome configurations. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Unbalanced systems might experience strong osmotic pressures and membrane (curvature) stress, causing unwanted shape deformations all the way to membrane rupture.”
§ Molecular dynamics simulation of an entire cell > Discussion
What the sources say
- Partly supportedcites Pezeshkian et al., 2021 sourceExperimental — accuracy not yet measured
In “Constructing the viral envelope” (page unavailable), the paper reports that excess solvent particles led to pore formation and membrane rupture. In “4. Lipid fingerprinting analysis” (page unavailable), it says an imbalance in surface-area-to-volume ratio could deform the particle. These passages support deformation and rupture in unbalanced simulations, but do not identify strong osmotic pressure or membrane curvature stress as the causes. (LLM, conf=0.84)
- Supportedcites Vermaas et al., 2022 source
In Results and Analysis, “Protocell Stability Assessment,” the paper says overfilling a closed lipid compartment can rupture its membrane, while underfilling can cause significant deformation. The same section links the observed deformations to pressure differences across the membrane and discusses the role of curvature. It does not report rupture in its simulated systems, but the claim presents rupture as a possibility. (LLM, conf=0.91)
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The workflow used in Martinize2 additionally performs quality checks on the atomistic protein structures and alerts to potential problems making it ideal for such a high-complexity use case (Kroon et al., 2022).”
§ Molecular dynamics simulation of an entire cell > Building cells with the Martini ecosystem
What the sources say
- Supportedcites Kroon et al., 2022 source
The Martinize2 section describes checks that identify missing or additional atoms in input structures. The Discussion reports that Martinize2 warns users about problems it cannot automatically resolve and issued a warning or error for all structures with seriously malformed residues in two benchmark sets. It also describes the program as fit for high-throughput and high-complexity tasks. Page numbers were not supplied. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The Martini force field employs a four-to-one mapping scheme, where up to four heavy atoms and associated hydrogens are represented by one CG bead.”
§ Molecular dynamics simulation of an entire cell > Introduction
What the sources say
- Partly supportedcites Marrink et al., 2022 sourceExperimental — accuracy not yet measured
Section 3.4 (Best practices and tips; page unavailable) describes regular Martini beads as mapping four atoms to one bead, alongside small three-to-one and tiny two-to-one beads. This supports the claim’s “up to four” mapping, but the passage does not specify that the counted atoms are heavy atoms or state how their associated hydrogens are represented. (LLM, conf=0.82)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Gromacs (Abraham et al., 2015), the main MD engine to run Martini-based simulations, is having difficulties handling systems comprising hundreds of millions of particles, in particular featuring large molecules such as the genome spread over multiple domains.”
§ Molecular dynamics simulation of an entire cell > Building cells with the Martini ecosystem > Solvating and simulating the cell
What the sources say
- Partly supportedcites Abraham et al., 2015 sourceExperimental — accuracy not yet measured
The Software description (p. unavailable) describes practical limits on GROMACS parallelism, but its example concerns a 150,000-atom system on a million cores—not a system with hundreds of millions of particles. The paper says MARTINI uses GROMACS infrastructure, but does not identify it as the main engine for MARTINI simulations or discuss difficulties with genome-sized molecules spanning domains. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
20 more claims · 6 with their cited sources checked
Create a free account to see all 65 claims and every source verdict.
- Probably not a substantial claim. 23
- It may state two separate claims as one. 25
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Since this pioneering work, genome-wide models have been developed to represent other bacterial organisms, including Escherichia coli.8,20–22”
From How to build the virtual cell with artificial intelligence: Priorities and opportunities (2024) · cites this paper as [20]
The cited source says what the claim attributes to it.
In the citing paper
“At the finest level of resolution, a near-atomic structure of a minimal bacterium (JCVI-syn3A) has been modeled using the coarse-grained Martini force field.”
From Bringing the genetically minimal cell to life on a computer in 4D (2026) · cites this paper as [6]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Molecular dynamics simulation of an entire cell > Discussion
“Even though our in silico cell contains more than 500 unique CG molecules and thereby presumably qualifies as the most complex system simulated to date”
§ Molecular dynamics simulation of an entire cell > Building cells with the Martini ecosystem > Solvating and simulating the cell
“Having constructed a starting model for Syn3A, the current challenge is to perform an actual MD simulation.”
Citations
Cites
Highly accurate protein structure prediction with AlphaFold
Jumper, J., Evans, R., Pritzel, A., Green, T., Figurnov, M., Ronneberger, O., Tunyasuvunakool, K., Bates, R., Žídek, A., Potapenko, A., et al. (2021) · Nature · doi:10.1038/s41586-021-03819-2 · Cited by 43,764 · cited 3×
“Secondly, since AlphaFold2 was used to predict the protein structures of the whole proteome, only monomeric structures were initially available.”
MethodInfluentialAbraham, M. J., Murtola, T., Schulz, R., Páll, S., Smith, J. C., Hess, B., & Lindahl, E. (2015) · SoftwareX · doi:10.1016/j.softx.2015.06.001 · Cited by 27,190 · cited 1×
“Gromacs (Abraham et al., 2015), the main MD engine to run Martini-based simulations, is having difficulties handling systems comprising hundreds of millions of particles, in particular featuring large molecules such as the genome spread over multiple domains.”
OpenMM 7: Rapid development of high performance algorithms for molecular dynamics
Eastman, P., Swails, J., Chodera, J. D., McGibbon, R. T., Zhao, Y., Beauchamp, K. A., Wang, L.-P., Simmonett, A. C., Harrigan, M. P., Stern, C. D., et al. (2017) · PLOS Computational Biology · doi:10.1371/journal.pcbi.1005659 · Cited by 2,748 · cited 1×
“Possible other software engines to consider are ddcMD (Zhang et al., 2020) and openMM (Eastman et al., 2017), both of which are supporting Martini and offer simulation speeds comparable to those of Gromacs.”
ResultMartini 3: A general purpose force field for coarse-grained molecular dynamics
Souza, P. C. T., Alessandri, R., Barnoud, J., Thallmair, S., Faustino, I., Grünewald, F., Patmanidis, I., Abdizadeh, H., Bruininks, B. M. H., Wassenaar, T. A., et al. (2021) · Nature Methods · doi:10.1038/s41592-021-01098-3 · Cited by 1,551 · cited 1×
“With over 800 different bead types and a recalibrated interaction matrix, Martini 3 offers an improved framework for CG MD simulations (Souza et al., 2021).”
MethodSelf-citationDesign and synthesis of a minimal bacterial genome
Hutchison, C. A., Chuang, R.-Y., Noskov, V. N., Assad-Garcia, N., Deerinck, T. J., Ellisman, M. H., Gill, J., Kannan, K., Karas, B. J., Ma, L., et al. (2016) · Science · doi:10.1126/science.aad6253 · Cited by 1,500 · cited 2×
“To showcase this possibility, we consider one of the simplest cells known to date: the minimal cell created by the J. Craig Venter Institute (Hutchison et al., 2016), a stripped-down version of a Mycoplasma bacterium.”
Background‘Improved parameters for the Martini coarse-grained protein force field’
de Jong, D. H., Singh, G., Bennett, W. F. D., Arnarez, C., Wassenaar, T. A., Schäfer, L. V., Periole, X., Tieleman, D. P., & Marrink, S. J. (2013) · Journal of Chemical Theory and Computation · doi:10.1021/ct300646g · Cited by 1,486
A Whole-Cell Computational Model Predicts Phenotype from Genotype
Karr, J. R., Sanghvi, J. C., Macklin, D. N., Gutschow, M. V., Jacobs, J. M., Bolival, B., Assad-Garcia, N., Glass, J. I., & Covert, M. W. (2012) · Cell · doi:10.1016/j.cell.2012.05.044 · Cited by 1,300 · cited 1×
“…cell-scale structures such as cellPACK (Johnson et al., 2015; Maritan et al., 2022), genome-scale well-stirred reaction models for metabolism (Karr et al., 2012; Macklin et al., 2014; Karr et al., 2015; Breuer et al., 2019; Macklin et al., 2020), or mesoscale kinetic models that attempt to…”
BackgroundBiomolecular Simulation: A Computational Microscope for Molecular Biology
Dror, R. O., Dirks, R. M., Grossman, J. P., Xu, H., & Shaw, D. E. (2012) · Annual Review of Biophysics · doi:10.1146/annurev-biophys-042910-155245 · Cited by 1,198 · cited 1×
“Over the past decades, MD has matured into a powerful tool that functions as a computational microscope (Lee et al., 2009; Dror et al., 2012).”
BackgroundWassenaar, T. A., Ingólfsson, H. I., Böckmann, R. A., Tieleman, D. P., & Marrink, S. J. (2015) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.5b00209 · Cited by 1,174
Machine Learning for Molecular Simulation
Noé, F., Tkatchenko, A., Müller, K.-R., & Clementi, C. (2020) · Annual Review of Physical Chemistry · doi:10.1146/annurev-physchem-042018-052331 · Cited by 956 · cited 1×
“Furthermore, machine-learning can be invoked to extract interaction patterns and other emergent behavior that might be missed by standard analysis tools (Noé et al., 2020; Wang et al., 2020; Kaptan and Vattulainen, 2022).”
Background
Research works printed but not linked: 2
- 2022, ‘Blender - a 3D modelling and rendering package’
- 2022, ‘Martini_Minimal_Cell’
Cited by
How to build the virtual cell with artificial intelligence: Priorities and opportunities
Bunne, C., Roohani, Y., Rosen, Y., Gupta, A., Zhang, X., Roed, M., Alexandrov, T., AlQuraishi, M., Brennan, P., Burkhardt, D. B., et al. (2024) · Cell · doi:10.1016/j.cell.2024.11.015 · Cited by 393
“8 20–22 Despite their widespread use in modeling biological systems, approaches to date fall short of capturing many aspects of the operations of both bacterial and more complex systems, such as human cells.”
Martinize2 and Vermouth provide a unified framework for molecular topology generation
Kroon, P. C., Grünewald, F., Barnoud, J., van Tilburg, M., Brasnett, C., Souza, P. C., Wassenaar, T. A., & Marrink, S. J. (2025) · eLife · doi:10.7554/elife.90627 · Cited by 124
Self-citationMcCafferty, C. L., Klumpe, S., Amaro, R. E., Kukulski, W., Collinson, L., & Engel, B. D. (2024) · Cell · doi:10.1016/j.cell.2024.01.005 · Cited by 116
“219 The cell geometry and location of ribosomes were provided by cryo-ET, and the time-dependent behavior of metabolic processes, transcription, and translation were modeled using two different methods.”
GōMartini 3: From large conformational changes in proteins to environmental bias corrections
Souza, P. C. T., Borges-Araújo, L., Brasnett, C., Moreira, R. A., Grünewald, F., Park, P., Wang, L., Razmazma, H., Borges-Araújo, A. C., Cofas‐Vargas, L. F., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-58719-0 · Cited by 110
“Thus, simulations of crowded membranes 8 and even future cell-simulations 104 may still rely on simple EN approaches.”
Self-citationCHARMM-GUI Multicomponent Assembler for modeling and simulation of complex multicomponent systems
Kern, N. R., Lee, J., Choi, Y. K., & Im, W. (2024) · Nature Communications · doi:10.1038/s41467-024-49700-4 · Cited by 89
“For example, PACKMOL and cellPACK can pack molecules into complex shapes such as budding vesicles and viral capsids 10,11,24 ;polyplyandpysimmcanmodellongpolymerchains(e.g., DNA/RNA) densely packed with proteins in a cytoplasm 29,67 .”
Metadata
- Authors
- Stevens, J. A., Grünewald, F., van Tilburg, P. A. M., König, M., Gilbert, B. R., Brier, T. A., Thornburg, Z. R., Luthey-Schulten, Z., & Marrink, S. J.
- Affiliations
- University of Groningen (NL)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Marrink, Siewert J.
- ORCID
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2023-01-18
- Volume
- 11
- Pages
- 1106495-1106495
- ISSN
- 2296-2646 (ISSN-L)
- PMC
- PMC9889929
- OpenAlex
- W4317104064
- Cited by
- 156
- References
- 85
- Citations by year
- 2026: 35 · 2025: 52 · 2024: 48 · 2023: 21
- FWCI
- 13.86
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Frontiers in Chemistry (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion, other-oa)
- Funders
- National Science Foundation (2221237, 1505008, 1430124)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWA.1292.19.170)
- HORIZON EUROPE European Research Council (101053661)
- Topics
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein Structure and Dynamics
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Advanced Physical and Chemical Molecular Interactions
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › RNA and protein synthesis mechanisms
- Keywords
- minimal cell, synthetic biology, computational microscopy, integrative modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Molecular dynamics simulation of an entire cell. https://app.cochat.ai/papers/10.3389/fchem.2023.1106495
- The paper
- Stevens, J. A., Grünewald, F., van Tilburg, P. A. M., König, M., Gilbert, B. R., Brier, T. A., Thornburg, Z. R., Luthey-Schulten, Z., & Marrink, S. J. (2023). Molecular dynamics simulation of an entire cell. Frontiers in Chemistry. https://doi.org/10.3389/fchem.2023.1106495
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.