Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating
Open accessThe DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index; 27 of the 41 sources its claims cite were checked for support.
Abstract
Magnesium has attracted attention as an orthopedic implant material due to its excellent biocompatibility and biodegradability; however, rapid corrosion in physiological environments remains a major limitation. In this study, a polydopamine (PDA) intermediate layer and alginate/chitosan multilayer coating were formed on pure magnesium surfaces, with dexamethasone incorporation to simultaneously improve corrosion resistance and bioactivity. SEM observation revealed that uniform coating layers were formed on alginate/chitosan multilayer coated specimens, and the chemical structure of the coating layers was confirmed through FT-IR and XRD analyses. Electrochemical analysis revealed that the PDA/alginate/chitosan coating group exhibited higher corrosion potential (Ecorr: −0.7514 ± 0.022 V vs. −1.706 ± 0.001 V) and lower corrosion current density (icorr: 2.275 ± 0.15 × 10−7 A/cm2 vs. 1.528 ± 0.47 × 10−4 A/cm2) compared to pure magnesium, with the highest impedance indicating superior corrosion resistance. In tape peel testing, the polydopamine-coated group demonstrated superior adhesion compared to the non-coated group, and sustained release of dexamethasone was confirmed. MC3T3-E1 cell culture results confirmed cell proliferation in all specimens, with the PDA/alginate/chitosan group exhibiting the highest ALP activity compared to other surface-treated groups. Based on these results, the PDA/alginate/chitosan multilayer coating was confirmed to be an effective surface modification method for corrosion control and promotion of osteoblast differentiation on magnesium.
Overview
CoChat Summary
TL;DR
A polydopamine (PDA) intermediate layer plus alginate/chitosan multilayer coating was fabricated on pure magnesium, with dexamethasone loading for drug delivery. The PDA/alginate/chitosan coating improved corrosion resistance, adhesion, and supported MC3T3-E1 osteoblast viability/differentiation, though dexamethasone did not further enhance ALP activity under the extraction-media conditions.
Key findings
- PDASC specimens showed the best corrosion resistance: E_corr increased to -0.7514 ± 0.022 V vs. -1.706 ± 0.001 V for pure magnesium, and i_corr decreased to 2.275 ± 0.15 × 10⁻⁷ A/cm² vs. 1.528 ± 0.47 × 10⁻⁴ A/cm². Impedance magnitude/semicircle diameter increased in the order PM < PDA < PSC < PDASC.
- SEM showed uniform coating layers on PSC, PDASC, and PDASC-Dex, while PDA-only surfaces had distinct cracks; PDASC cross-section had a continuous coating about 12 µm thick with concentrated C, O, and Ca.
- Tape peel testing showed PDASC retained the polymer coating on magnesium, whereas PSC coating was entirely transferred to the tape, indicating better adhesion with the PDA underlayer.
- PDASC-Dex showed gradual, sustained dexamethasone release. MC3T3-E1 cells proliferated in all extract media; day 1 showed no significant differences, day 3 PM had highest proliferation and PDASC was relatively higher among coated groups. On day 10, PM had highest ALP activity and PDASC had the highest ALP among surface-treated specimens; PDASC-Dex did not show significantly higher ALP than PDASC.
Methods
- Pure magnesium plates (10 mm × 10 mm × 1 mm) were polished, alkali-pretreated, coated with PDA, then layer-by-layer coated with alginate/chitosan for 5 cycles; dexamethasone was dispersed in 1 wt% sodium alginate at 0.05 wt% for drug-loaded specimens. Groups: PM, PSC, PDA, PDASC, PDASC-Dex.
- Surface characterization used SEM/EDS, FT-IR, XRD, water contact angle, and surface profilometry. Corrosion was tested by potentiodynamic polarization and EIS in Hanks’ balanced salt solution; adhesion by ASTM D3359-17 tape test; drug release by UV-Vis at 241 nm in distilled water at 37 °C.
- In vitro tests used MC3T3-E1 murine calvarial osteoblast cells with extraction media per ISO 10993.12; WST/CCK-8 at 1 and 3 days, crystal violet morphology, and ALP activity at 7 and 10 days. Experiments were performed in triplicate with one-way ANOVA, p < 0.05 considered significant.
Limitations
- Stated in the paper: evaluation used extract media rather than direct cell culture on specimen surfaces; no in vivo animal studies; long-term mechanical integrity under simulated physiological loading was not assessed; drug release was tested in distilled water rather than HBSS/α-MEM, which may overestimate release due to missing ionic interactions.
- Evident from the text: the study used only pure magnesium, not orthopedic Mg alloys such as AZ31 or WE43, so alloy-specific performance is not demonstrated.
- Evident from the text: dexamethasone loading did not produce additional ALP enhancement over PDASC alone under these extraction conditions, likely because released dexamethasone did not reach sufficient concentrations due to dilution and medium refresh.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 0 Not valid · 11 Not checked · 96 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“However, the clinical application of magnesium is limited due to its rapid corrosion and the consequent rapid deterioration of mechanical properties, as well as the difficulty in controlling the timing of degradation in physiological environments [33,35].”
§ Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating > 4. Discussion
What the sources say
- Supportedcites [33] Lu, 2021, Biodegradable magnesium alloys for orthopaedic applications, Biomater. Transl. doi:10.12336/biomatertransl.2021.03.005
The ‘Magnesium biodegradation in the physiological environment’ section says rapid corrosion can reduce an implant’s mechanical strength and that the degradation rate must be carefully controlled. ‘Future Perspectives’ explains that degradation must be timed to bone healing, supporting the claim that controlling degradation in the physiological environment is a clinical challenge. (LLM, conf=0.89)
- Supportedcites [35] Pogorielov, 2017, Magnesium-based biodegradable alloys: Degradation, application, and alloying elements, Interv. Med. Appl. Sci. source
The Conclusion says magnesium and its alloys were not widely used because of uncontrolled corrosion. The Mg Alloy Degradation section describes tailoring degradation to a biological environment as a major challenge and says fast resorption can cause mechanical instability before bone heals. (LLM, conf=0.93)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“However, the clinical application of magnesium is limited due to its rapid corrosion and the consequent rapid deterioration of mechanical properties, as well as the difficulty in controlling the timing of degradation in physiological environments [33,35].”
§ Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating > 4. Discussion
What the sources say
- Supportedcites [33] Lu, 2021, Biodegradable magnesium alloys for orthopaedic applications, Biomater. Transl. doi:10.12336/biomatertransl.2021.03.005
The Introduction (‘Possible use of magnesium in surgical applications’; page unavailable) says current Mg alloys can degrade too quickly in the human body and lose function before tissue heals. The ‘Magnesium biodegradation in the physiological environment’ section adds that rapid corrosion may reduce mechanical strength. Together, these support the attributed clinical limitation. (LLM, conf=0.90)
- Supportedcites [35] Pogorielov, 2017, Magnesium-based biodegradable alloys: Degradation, application, and alloying elements, Interv. Med. Appl. Sci. source
The Conclusion says Mg implants were not widely used because of uncontrolled corrosion, which led to implant failure. The Mg Alloy Degradation section explains the mechanical consequence: fast resorption can cause instability before bone healing is complete. Together, these passages support the attributed claim. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Magnesium has density and strength similar to natural bone, and offers the advantage of degrading in vivo, eliminating the need for secondary surgery to remove the implant [33,34].”
§ Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating > 4. Discussion
What the sources say
- Supportedcites [33] Lu, 2021, Biodegradable magnesium alloys for orthopaedic applications, Biomater. Transl. doi:10.12336/biomatertransl.2021.03.005
The Introduction (‘Possible use of magnesium in surgical applications’) states that magnesium alloys biodegrade in the human body and can eliminate the need for a second surgery to remove the implant. (LLM, conf=0.95)
- Supportedcites [34] Wang, Z., Liu, B., Yin, B., Zheng, Y., Tian, Y., and Wen, P. (2022). Comprehensive review of additively manufactured biodegradable magnesium implants for repairing bone defects from biomechanical and biodegradable perspectives. Front. Chem., 10. source
Section 1.1 states that magnesium dissolves in body fluids and that, if its degradation rate is controlled, no residue remains after healing, so implant-removal surgery can be avoided. Table 1 in the same section likewise describes complete decomposition in the body as avoiding post-healing implant removal. Page numbers were not supplied. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Surface modification of magnesium to overcome these drawbacks is the most effective method for controlling corrosion and enhancing bioactivity [36,37].”
§ Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating > 4. Discussion
What the sources say
- Partly supportedcites [36] Zhang, T., Wang, W., Liu, J., Wang, L., Tang, Y., and Wang, K. (2022). A review on magnesium alloys for biomedical applications. Front. Bioeng. Biotechnol., 10. sourceExperimental — accuracy not yet measured
Section 3.2 says appropriate surface modification can improve magnesium alloys’ corrosion resistance and bioactivity. Section 3 also identifies surface treatment as a way to control corrosion, but neither section establishes that it is the most effective method. (LLM, conf=0.87)
- Partly supportedcites [37] Tian, 2015, Surface modification of biodegradable magnesium and its alloys for biomedical applications, Regen. Biomater. sourceExperimental — accuracy not yet measured
The Introduction says surface modification aims to provide corrosion protection and good surface biocompatibility; the coatings section also describes a treatment intended to improve corrosion resistance and surface bioactivity. But the paper does not establish that surface modification is the *most effective* method, and its Concluding Remarks note limitations of existing methods. (LLM, conf=0.88)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This can be interpreted as Mg 2+ released from PM under daily medium exchange conditions acting within a concentration range that promotes osteoblast proliferation and metabolic activity in the several mM range, as reported in the literature, rather than accumulating to toxic levels [45,46].”
§ Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating > 4. Discussion
What the sources say
- Partly supportedcites [45] He, 2016, Effect of magnesium ion on human osteoblast activity, Braz. J. Med. Biol. Res. sourceExperimental — accuracy not yet measured
Split into 2 atoms — 1 confirmed, 1 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
- Supportedcites [46] Nie, 2020, Effect of magnesium ions/Type I collagen promote the biological behavior of osteoblasts and its mechanism, Regen. Biomater. source
Split into 2 atoms — 2 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
65 more claims · 3 with their cited sources checked
Create a free account to see all 122 claims and every source verdict.
- Probably not a substantial claim. 10
- It may state two separate claims as one. 43
Citations
Cites
A reversible wet/dry adhesive inspired by mussels and geckos
Lee, H., Lee, B. P., & Messersmith, P. B. (2007) · Nature · doi:10.1038/nature05968 · Cited by 2,043
Interactions between Alginate and Chitosan Biopolymers Characterized Using FTIR and XPS
Lawrie, G., Keen, I., Drew, B., Chandler-Temple, A., Rintoul, L., Fredericks, P., & Grøndahl, L. (2007) · Biomacromolecules · doi:10.1021/bm070014y · Cited by 1,419
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Advances in functionalized polymer coatings on biodegradable magnesium alloys–A review
Li, L.-Y., Cui, L.-Y., Zeng, R.-C., Li, S.-Q., Chen, X.-B., Zheng, Y., & Kannan, M. B. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.030 · Cited by 466
Structures, properties and application of alginic acid: A review
Guo, X., Wang, Y., Qin, Y., Shen, P., & Peng, Q. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.180 · Cited by 409
Surface modification of biodegradable magnesium and its alloys for biomedical applications
Tian, P., & Liu, X. (2015) · Regenerative Biomaterials · doi:10.1093/rb/rbu013 · Cited by 218
Jin, W., Wu, G., Feng, H., Wang, W., Zhang, X., & Chu, P. K. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.049 · Cited by 211
A review on magnesium alloys for biomedical applications
Zhang, T., Wang, W., Liu, J., Wang, L., Tang, Y., & Wang, K. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.953344 · Cited by 208
Shahin, M., Munir, K., Wen, C., & Li, Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.007 · Cited by 189
Functionalization treatment of micro-arc oxidation coatings on magnesium alloys: a review
Lin, Z., Wang, T., Yu, X., Sun, X., & Yang, H. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.160453 · Cited by 183
Zou, Y.-H., Wang, J., Cui, L.-Y., Zeng, R.-C., Wang, Q.-Z., Han, Q.-X., Qiu, J., Chen, X.-B., Chen, D.-C., Guan, S.-K., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.069 · Cited by 173
Effect of magnesium ion on human osteoblast activity
He, L. Y., Zhang, X. M., Liu, B., Tian, Y., & Ma, W. H. (2016) · Brazilian Journal of Medical and Biological Research · doi:10.1590/1414-431x20165257 · Cited by 166
Magnesium-based biodegradable alloys: Degradation, application, and alloying elements
Pogorielov, M., Husak, E., Solodivnik, A., & Zhdanov, S. (2017) · Interventional Medicine and Applied Science · doi:10.1556/1646.9.2017.1.04 · Cited by 150
Chen, Y. G., Kawazoe, N., & Chen, G. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.004 · Cited by 142
Rakoch, A. G., Monakhova, E. P., Khabibullina, Z. V., Serdechnova, M., Blawert, C., Zheludkevich, M. L., & Gladkova, A. A. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.06.002 · Cited by 134
Corrosion properties of polydopamine coatings formed in one-step immersion process on magnesium
Singer, F., Schlesak, M., Mebert, C., Höhn, S., & Virtanen, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08760 · Cited by 128
Chen, L., Sheng, Y., Zhou, H., Li, Z., Wang, X., & Li, W. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.12.005 · Cited by 122
Tissue-mimicking gelatin scaffolds by alginate sacrificial templates for adipose tissue engineering
Negrini, N. C., Bonnetier, M., Giatsidis, G., Orgill, D. P., Farè, S., & Marelli, B. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.018 · Cited by 115
da Conceição, T. F., Scharnagl, N., Blawert, C., et al. (2010) · Corrosion Science · doi:10.1016/j.corsci.2010.02.027 · Cited by 104
Ghali, O., Broux, O., Falgayrac, G., Haren, N., van Leeuwen, J. P., Penel, G., Hardouin, P., & Chauveau, C. (2015) · BMC Cell Biology · doi:10.1186/s12860-015-0056-6 · Cited by 95
Zhang, R., Lei, L., Song, Q., & Li, X. (2019) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.11.083 · Cited by 89
Costa, P. F., Puga, A. M., Díaz-Gomez, L., Concheiro, A., Busch, D. H., & Alvarez-Lorenzo, C. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.055 · Cited by 78
Wang, C., Shen, J., Xie, F., Duan, B., & Xie, X. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.03.021 · Cited by 68
Zhao, D., Chen, X., Ye, J., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.151857 · Cited by 64
Nie, X., Sun, X., Wang, C., & Yang, J. (2019) · Regenerative Biomaterials · doi:10.1093/rb/rbz033 · Cited by 63
Oxidized fullerene/sol-gel nanocomposite for corrosion protection of AM60B magnesium alloy
Samadianfard, R., Seifzadeh, D., Habibi‐Yangjeh, A., et al. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125400 · Cited by 62
Zhou, X., Liu, P., Nie, W., Chen, P., Li, T., Qiang, L., He, C., & Wang, J. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.237 · Cited by 59
Biodegradable magnesium alloys for orthopaedic applications
(2021) · PubMed Central · doi:10.12336/biomatertransl.2021.03.005 · Cited by 53
Liang, L., Guo, X., Liao, X., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144790 · Cited by 50
Fernández-Hernán, J. P., López, A. J., Torres, B., & Rams, J. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126798 · Cited by 49
Rajabalizadeh, Z., Seifzadeh, D., Habibi‐Yangjeh, A., et al. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.04.032 · Cited by 45
In-vitro corrosion of AZ31 magnesium alloys by using a polydopamine coating
Carangelo, A., Acquesta, A., & Monetta, T. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.005 · Cited by 39
Corrosion Resistance of MgZn Alloy Covered by Chitosan-Based Coatings
Kozina, I., Krawiec, H., Starowicz, M., & Kawalec, M. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22158301 · Cited by 35
Polymer bilayer-Micro arc oxidation surface coating on pure magnesium for bone implantation
Dong, J., Zhong, J., Hou, R., Hu, X., Chen, Y., Weng, H., Zhang, Z., Liu, B., Yang, S., & Peng, Z. (2023) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2023.05.003 · Cited by 33
Electrochemical polymerization of dopamine with/without subsequent PLLA coating on Mg-Zn-Y-Nd alloy
Song, C., Yang, Y.-X., Zhou, Y., Wang, L., Zhu, S., Wang, J., Zeng, R., Zheng, Y., & Guan, S. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.04.122 · Cited by 31
Wang, Z., Liu, B., Yin, B., Zheng, Y., Tian, Y., & Wen, P. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1066103 · Cited by 30
Baby, M., Periya, V. K., Sankaranarayanan, S. K. K., & Maniyeri, S. C. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144414 · Cited by 27
Mu, Y., Mu, P., Wu, X., & Wan, X. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146973 · Cited by 27
Dexamethasone-loaded hydroxyapatite enhances bone regeneration in rat calvarial defects
Darestani, R. T., Rasi, A. M., & Kamrani-Rad, A. (2013) · Molecular Biology Reports · doi:10.1007/s11033-013-2876-9 · Cited by 23
Miles, C. E., Bernstein, A. D., Osborn Popp, T. M., Murthy, N. S., Nieuwkoop, A. J., & Gormley, A. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01254 · Cited by 20
Miyahara, T., Nemoto, M., Tukamoto, S., Yamada, H., Kozuka, H., Kuze, S., Sudo, H., & Yamamoto, S. (1991) · Toxicology Letters · doi:10.1016/0378-4274(91)90200-p · Cited by 16
PARK, J.-B. (2014) · Molecular Medicine Reports · doi:10.3892/mmr.2013.1811 · Cited by 15
Self-citationRahvar, M., Ahmadi Lakalayeh, G., Nazeri, N., Marouf, B. T., Shirzad, M., Najafi T. Shabankareh, A., & Ghanbari, H. (2021) · Biomedical Engineering Letters · doi:10.1007/s13534-021-00205-9 · Cited by 15
Jia, R., He, Y., Liang, J., Duan, L., Ma, C., Lu, T., Liu, W., Li, S., Wu, H., Cao, H., et al. (2024) · iScience · doi:10.1016/j.isci.2024.109197 · Cited by 14
He, J., Zhang, Y., Liu, X., Peng, L., Li, H., Xiong, C., & Zhang, L. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.126939 · Cited by 11
Seki, H., Karita, M., & Suzuki, A. K. (1994) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.27.423 · Cited by 5
Osteogenic Effects of Ion Released from Biodegradable Metallic Magnesium and Calcium Coating
Miyake, R., Shimabukuro, M., Terauchi, M., Marukawa, E., & Kawashita, M. (2025) · Advanced Biology · doi:10.1002/adbi.202500401 · Cited by 5
Cui, L.-Y., Cheng, S.-C., Liang, L.-X., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.02.001
Cited by
Tao, Y., Qi, K., Qiu, Y., & Guo, X. (2026) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2026.110228 · Cited by 3
Chuang, A. E.-Y., Tung, S.-Y., Tzou, K.-Y., et al. (2026) · Journal of Nanobiotechnology · doi:10.1186/s12951-026-04899-w
Metadata
- Authors
- Park, J.-E., Jang, Y.-S., Ko, S.-O., & Lee, M.-H.
- Affiliations
- Jeonbuk National University (KR)
- Jeonbuk National University Hospital (KR)
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2026-02-03
- Volume
- 16
- Issue
- 3
- Pages
- 1542
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W7127425209
- Semantic Scholar
- 6c6195064619d28a2a205f7768a7fe31f13fac74
- Cited by
- 3
- References
- 42
- Citations by year
- 2026: 3
- FWCI
- 3.83
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Biomedical Research Institute, Jeonbuk National University Hospital
- Ministry of Education (RS-2024-00463725)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- magnesium implants, corrosion resistance, polydopamine coating, alginate, chitosan, multilayer coatings, dexamethasone, drug delivery, bioactivity (biomaterials), osteogenic differentiation, orthopedic implants, surface modification, biodegradable polymer coating
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.