The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
Open accessAbstract
Polylactic acid (PLA) filaments are very popular as a thermoplastic source used in the 3D printing field by the “Fused Deposition Modeling” method in the last decade. The PLA market is expected to reach 5.2 billion US dollars in 2020 for all of its industrial uses. On the other hand, 3D printing is an expanding technology that has a large economic potential in many industries where PLA is one of the main choices as the source polymer due to its ease of printing, environmentally friendly nature, glossiness and multicolor appearance properties. In this review, we first reported the chemical structure, production methods, general properties, and present market of the PLA. Then, the chemical modification possibilities of PLA and its use in 3D printers, present drawbacks, and the surface modification methods of PLA polymers in many different fields were discussed. Specifically, the 3D printing method where the PLA filaments are used in the extrusion-based 3D printing technologies is reviewed in this article. Many methods have been proposed for the permanent surface modifications of the PLA where covalent attachments were formed such as alkaline surface hydrolysis, atom transfer polymerization, photografting by UV light, plasma treatment, and chemical reactions after plasma treatment. Some of these methods can be applied for surface modifications of PLA objects obtained by 3D printing for better performance in biomedical uses and other fields. Some recent publications reporting the surface modification of 3D printed PLA objects were also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965 · cited 1×
“Messersmith and coworkers were the first to apply the polydopamine coatings onto surfaces in 2007 [140,141].”
BackgroundLiu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794 · cited 1×
“Messersmith and coworkers were the first to apply the polydopamine coatings onto surfaces in 2007 [140,141].”
BackgroundA Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · cited 1×
“The automotive industry tested the environmentally friendly PLA polymer for the car interior parts such as carpets, floor and trim parts, but obtained little success due to the low durability of PLA [8,10,13,14,18,21,27,35].”
MethodPoly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204 · cited 2×
“It is expected that low energy requirements will also decrease the future cost of PLA [23].”
BackgroundPolydopamine Surface Chemistry: A Decade of Discovery
Ryu, J. H., Messersmith, P. B., & Lee, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19865 · Cited by 1,843
Polymer brushes: surface-immobilized macromolecules
Zhao, B., & Brittain, W. J. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00012-5 · Cited by 1,628 · cited 1×
“Although it is useful, it is difficult to obtain high grafting densities on a PLA surface with a “grafting to” process because of the presence of steric hindrance and chain diffusion limitations [80].”
MethodAthanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Polydopamine—a nature-inspired polymer coating for biomedical science
Lynge, M. E., van der Westen, R., Postma, A., & Städler, B. (2011) · Nanoscale · doi:10.1039/c1nr10969c · Cited by 907 · cited 1×
“The catechol groups present in the polydopamine equilibrate to o-quinones that are very reactive to both amines and thiols under slightly basic conditions, which enables the secondary modification of polydopamine coatings via thiols and amines for bioconjugation [138,139].”
BackgroundRadano, C. P., Baker, G. L., & Smith, M. R. (2000) · Journal of the American Chemical Society · doi:10.1021/ja9930519 · Cited by 403
Rydz, J., Sikorska, W., Kyulavska, M., & Christova, D. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms16010564 · Cited by 303
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249 · cited 1×
“However, PLA filaments have some disadvantages: PLA has a poor toughness and elongation at break of less than 10% [51,52].”
BackgroundRelevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds
Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A., & Navarro, M. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.003 · Cited by 206
Biodegradable Poly(Lactic Acid): Synthesis, Modification, Processing and Applications
Ren, J. (2010) · doi:10.1007/978-3-642-17596-1 · Cited by 190
Janorkar, A. V., Metters, A. T., & Hirt, D. E. (2004) · Macromolecules · doi:10.1021/ma049056u · Cited by 173 · cited 1×
“As a result, it has been observed that the hydrophilicity or wettability of the grafted surfaces has improved considerably [86].”
BackgroundBioprocessing – no longer a field of dreams
Sawyer, D. J. (2003) · Macromolecular Symposia · doi:10.1002/masy.200351130 · Cited by 143
Toughness decrease of PLA‐PHBHHx blend films upon surface‐confined photopolymerization
Rasal, R. M., & Hirt, D. E. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32009 · Cited by 120
Parameters affecting cellular adhesion to polylactide films
Burg, K. J. L., Holder, W. D., Culberson, C. R., Beiler, R. J., Greene, K. G., Loebsack, A. B., Roland, W. D., Mooney, D. J., & Halberstadt, C. R. (1999) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856299x00108 · Cited by 69
Cited by
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Self-citation3D printing of polylactic acid: recent advances and opportunities
Joseph, T. M., Kallingal, A., Suresh, A. M., Mahapatra, D. K., Hasanin, M. S., Haponiuk, J., & Thomas, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10795-y · Cited by 313
Post-Production Finishing Processes Utilized in 3D Printing Technologies
Kantaros, A., Ganetsos, T., Petrescu, F., Ungureanu, L., & Munteanu, I. (2024) · Processes · doi:10.3390/pr12030595 · Cited by 80
“Chemical treatments, such as coatings or surface modification, can impart specific functionalities like corrosion resistance or biocompatibility [24].”
BackgroundThe sustainability of emerging technologies for use in pharmaceutical manufacturing
Weaver, E., O’Hagan, C., & Lamprou, D. A. (2022) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2022.2093857 · Cited by 70
“22 [36] ● Tablet manufacturing [37] ● Medical implants ● Tissue scaffolding [38]”
BackgroundAsadollahi, M., Gerashi, E., Zohrevand, M., Zarei, M., Sayedain, S. S., Alizadeh, R., Labbaf, S., & Atari, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00228 · Cited by 59
Metadata
- Authors
- Baran, E. H., & Erbil, H. Y.
- Venue
- Colloids and Interfaces
- Publisher
- MDPI AG
- Published
- 2019-03-29
- Volume
- 3
- Issue
- 2
- Pages
- 43
- ISSN
- 2504-5377 (ISSN-L)
- OpenAlex
- W2931509274
- Cited by
- 248
- References
- 23
- FWCI
- 5.81
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.