Rheological, Structural, and Biological Trade-Offs in Bioink Design for 3D Bioprinting
Open accessThe DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Abstract
Bioinks represent the core of 3D bioprinting, as they are the carrier responsible for enabling the fabrication of anatomically precise, cell-laden constructs that replicate native tissue architecture. Indeed, their role goes beyond structural support, as they must also sustain cellular viability, proliferation, and differentiation functions, which are critical for applications in the field of regenerative medicine and personalized therapies. However, at present, a persistent challenge lies in reconciling the conflicting demands of rheological properties, which are essential for printability and biological functionality. This trade-off limits the clinical translation of bioprinted tissues, particularly for vascularized or mechanically dynamic organs. Despite huge progress during the last decade, challenges persist in standardizing bioink characterization, scaling production, and ensuring long-term biomimetic performance. Based on these challenges, this review explores the inherent trade-off faced by bioink research optimizing rheology to ensure printability, shape fidelity, and structural integrity, while simultaneously maintaining high cell viability, proliferation, and tissue maturation offering insights into designing next-generation bioinks for functional tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 (A) Anti-oxidative bioinks (methacrylate-modified rutin-glycidyl methacrylate silk fibroin) for cartilage tissue engineering application [86]. (B) Visualization of cartilage with C28/I2 chondrocytes on decellularized scaffold by scanning electron microscopy. Cells attached to scaffold after 1 week in culture. (Scale bar = 20 µm) [105]. (C) Biocompatibility (i) Cell viability by Live/dead cell staining,(scale bars = 200 µm)) and (ii) chondrogenic inductivity of methacrylated cartilage extracellular matrix constructs stained for type I and II collagens and sGAGs (scale bars = 100 µm) [106]. Adapted under open access Creative Commons CCBY 4.0 license/ through open access permission from Refs. [86,105,106].](https://figures.cochat.ai/paper-figures/6419d5c480114c6597e1309711d2472b/rheological-structural-and-biological-trade-offs-in-bioink-design-for-3d-figure-3.jpg)
![Figure 4 (A) Omentum decellularization and ECM hydrogel generation. (i)—Native omentum, (ii)—De cellularized omentum, (iii)—Representative hrSEM image of the hydrogel. Scale bar = 1 µm. (B) (i)—YIGSR-alginate gel generation schematics and (ii)—Adhesion of iPSCs-derived ECs to pristine (left) and modified alginate (right) sheets, 4 h post-seeding. (scale bar = 100 μm) (C) The 3D printed vascularized patches. (i) The bioinks that were used in the printing process. (ii) Schematics of the patch bioprinting process. (iii) Viability after printing. (iv) Representative fluorescence image of two printed large blood vessels stained for F-actin and DAPI after 14 days in culture (scale bar = 100 μm). (v) Representative fluorescence image of a printed large blood vessel and surrounding capillary-like structures stained for F-actin and DAPI after 14 days in culture (scale bar = 100 μm). (vi) Representative 3D confocal images of a 3D printed blood vessel immunostained for the endothelial cell marker CD31 after 14 days in culture, EC monolayer zoom-in image (top), a zoom-in image showing EC sprouting from the blood vessel wall (bottom) (scale bars = 100 μm). (vii) Representative 3D confocal images of a 3D printed blood vessel immunostained for CD31 after 14 days in culture (scale bar = 100 μm) [64]. Adapted under open access Creative Commons CCBY 4.0 license/through open access permission from Ref. [64].](https://figures.cochat.ai/paper-figures/c877975824ed44b08ea2c19f2af134e4/rheological-structural-and-biological-trade-offs-in-bioink-design-for-3d-figure-4.jpg)
![Figure 5 (A) 3D printed PLA-45S5 BG scaffolds. (i)—CAD render of PLA-BG scaffolds with a pore size of width = 750 μm, (ii)—FDM 3D printed PLA-BG scaffolds (PLA-0%, PLA-1%, PLA-2.5%, PLA-5%, and PLA-10%), Scale bars: 500 μm, (iii)—Top view light microscopy image of a PLA-BG scaffold. Scale bar: 2 mm. (iv–vii): Printability assessment and porosity analysis of PLA-BG scaffolds. ** p < 0.01, **** p < 0.0001 indicate statistical significant difference of means in comparison to 3D printed 0% BG PLA by one-way ANOVA or Welch’s t-test in pairwise comparisons of scaffold side pore diameter. (B) Mechanical properties of 3D printed PLA-45S5 BG scaffolds, (i)—Macroscopic images illustrating different failure modes of 1 and 10% (wt), (ii)—Qualitative stress strain diagram, (iii)—Compression strength and modulus of elasticity of 3D printed PLA-BG scaffolds. (C) Fluorescence microscopy images of Calcein AM (green)/DAPI (blue) stained MC3T3E1 on 3D printed PLA-BG scaffolds (Scale bar: 200 μm). Adapted under open access Creative Commons CCBY 4.0 license/through open access permission from Ref. [116].](https://figures.cochat.ai/paper-figures/e347204b64c7429692c36548930a4536/rheological-structural-and-biological-trade-offs-in-bioink-design-for-3d-figure-5.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Among the available techniques, extrusion-based bioprinting is the most widely used owing to its versatility and compatibility with hydrogel-based bioinks [4,5,6].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [4]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915 · cited 1×
“It is noted that more rigid matrices have been shown to promote the osteogenic differentiation of mesenchymal stem cells (MSCs), while softer matrices are more conducive to neurogenic differentiation [75].”
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146 · cited 1×
“For instance, Yue et al. [88] revealed that increasing photo-crosslinking in GelMA bioink improved mechanical stability but impeded cell migration and proliferation, highlighting the necessity of precisely adjusting crosslinking density to facilitate tissue development.”
Malafaya, P. B., Silva, G. A., & Reis, R. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.012 · Cited by 1,401 · cited 1×
“…as collagen, alginate, gelatin, and hyaluronic acid provide an environment conducive to cell attachment and tissue remodeling, while synthetic polymers such as polyethylene glycol (PEG) and polycaprolactone (PCL) offer tunable mechanical properties suitable for structural reinforcement [18–21].”
Lee, K., Silva, E. A., & Mooney, D. J. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0223 · Cited by 1,386 · cited 1×
“At the core of this innovative approach lies bioinks, a specialized material formulation designed to encapsulate and deliver cells, growth factors, and bioactive molecules to a designated location with spatial control [6,7].”
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045 · cited 1×
“Studies have shown that lower extrusion pressures and controlled deposition rates enhance cell viability while maintaining print fidelity [53].”
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950 · cited 1×
“Paxton et al. [95] emphasized the need for standardized methods to evaluate printability and shape fidelity, underscoring the importance of rheological assessment and predictive modeling in the design of next-generation bioink.”
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863 · cited 1×
“…ease with which it can flow through the printing nozzle; a high-viscosity bioink may hinder extrusion, requiring excessive force that could compromise cell viability, while a low-viscosity bioink may lead to excessive spreading, resulting in poor print resolution and structural instability [15].”
Strategies for controlled delivery of growth factors and cells for bone regeneration
Vo, T. N., Kasper, F. K., & Mikos, A. G. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.01.016 · Cited by 666 · cited 1×
“The delivery of these factors can be enhanced by employing combinations of growth factors or by integrating small molecules that influence cell signaling pathways [80].”
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630 · cited 1×
“Additionally, the use of microfluidic channels within the bioprinted construct can provide direct nutrient delivery [69].”
Rheology and the breadmaking process
Dobraszczyk, B. J., & Morgenstern, M. P. (2003) · Journal of Cereal Science · doi:10.1016/s0733-5210(03)00059-6 · Cited by 608
Research works printed but not linked: 1
- GlobeNewswire FluidForm Bio Announces Advance in Bioprinted Tissue Therapies with Landmark Publication in Science Advances 2025 Available online: https://www.biospace.com/press-releases/fluidform-bio-announces-advance-in-bioprinted-tissue-therapies-with-landmark-publication-in-science-advances (accessed on 25 April 2025)
Cited by
Next generation bioprinting with artificial intelligence in the healthcare industry
Dhiman, B., Bammidi, R., Kumar, M., Rangappa, S. M., & Siengchin, S. (2026) · Next Bioengineering · doi:10.1016/j.nxbio.2026.100015 · Cited by 28
Bioprinted Scaffolds for Biomimetic Applications: A State-of-the-Art Technology
Gebeshuber, I. C., Khawas, S., Sharma, R., & Sharma, N. (2025) · Biomimetics · doi:10.3390/biomimetics10090595 · Cited by 26
“Together, these approaches demonstrate that careful tuning of the material composition, crosslinking, and rheology is essential to fabricate scaffolds that are mechanically robust while supporting cell proliferation, differentiation, and tissue development [50].”
InfluentialPrakash, A., Malviya, R., Sridhar, S. B., Wadhwa, T., Shareef, J., & Tripathy, D. B. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101255 · Cited by 23
Quantitative Assessment of Hydrogel Printability in Extrusion Bioprinting
Yu, S., Luo, Y., Chen, S., Fan, J., & Zhang, H. (2026) · Gels · doi:10.3390/gels12030189 · Cited by 18
“The successful implementation of extrusion-based bioprinting relies on the synergistic optimization of multiple parameters, necessitating the establishment of a comprehensive evaluation framework that integrates rheological properties, structural fidelity, and biological performance [79,84,85].”
Cutting-Edge Smart Hydrogel Platforms for Improved Wound Healing
Sharma, A., Puri, V., Dheer, D., Kaur, M., Huanbutta, K., & Sangnim, T. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18040406 · Cited by 13
Picado-Tejero, D., Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., & Marcos-Romero, A. C. (2026) · ACS Omega · doi:10.1021/acsomega.5c09668 · Cited by 10
Shukla, A. K., Shukla, S., Suryawanshi, S. P., Upadhyay, A. M., Ray, N., Thiruppathi, G., Dutta, S. D., & Mongre, R. K. (2025) · Current Oncology · doi:10.3390/curroncol32120653 · Cited by 10
da Silva, V. A., Yu, B., & Willerth, S. M. (2026) · Biofabrication · doi:10.1088/1758-5090/ae46e2 · Cited by 10
Chirume, W. M., Guo, C., Zheng, D., Ma, F., Fan, C., Li, L., Wang, L., Zhou, C., & Kong, Q. (2026) · RSC Advances · doi:10.1039/d5ra09513a · Cited by 8
3D bioprinting: current status and future prospects in tissue and organ regeneration
Selvakumar, M., Dhanasekar, J., Nandhakumaran, S., & Sudhamani, T. (2026) · Future Journal of Pharmaceutical Sciences · doi:10.1186/s43094-026-00982-z · Cited by 9
Mondésert, H., Malloggi, C., Lazzaro, A., Sala, G., Corvaglia, V., Forouharshad, M., & Gelain, F. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb00279f · Cited by 5
Kumar, P., Kumar, A., Saini, S., & Kayastha, A. M. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505346 · Cited by 6
“Recent chemical and rheological analyses havequantitativelydemonstratedthatincreasedpolymerconcen-tration or crosslinking density enhances filament stability while simultaneously compromising cellular function and long-term remodeling [28].”
Patel, P. S., Pandey, G., Kumar, A., Misra, S. K., Roy, S., Awasthi, A., Wagh, S. S., Srivastava, S., & Kapoor, A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00671-8 · Cited by 8
Sundaram, V. A., Infant, S. S., Saravanan, A., Bhavani Sowndharya, B., Manikandan, S., Sundaram, T., Arora, S., Munjal, K., & Chopra, H. (2026) · Regenerative Medicine · doi:10.1080/17460751.2026.2634722 · Cited by 5
Lin, M., Jiang, D., Zhang, X., & Kang, Y. Y. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505819 · Cited by 4
Nicolae, C.-V., Kadousaraei, M. J., Yamada, S., Aydin, M. S., Al‐Sharabi, N., Campodoni, E., Sandri, M., Steinmüller‐Nethl, D., Syverud, K., Vasile, B. Ş., et al. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115510 · Cited by 3
Current and future strategies of theragenerative platforms supplemented using biofabrication
Zhai, J., Chae, S., Lee, H., & Kim, G. (2026) · Applied Physics Reviews · doi:10.1063/5.0291532 · Cited by 3
Khan, S., & Ahmed, T. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00476 · Cited by 2
Tyagi, R., Ghising, S., Bandhu, D., Tripathi, A., Kumar, V. D., Rahman, S. M. N., Payal, H., & Darko, D. A. (2026) · Journal of Robotics · doi:10.1155/joro/6401146 · Cited by 2
Thiolated Polymers in 3D Bioprinting: Control of Gelation
Haddadzadegan, S., Laffleur, F., & Bernkop‐Schnürch, A. (2026) · Advanced Materials · doi:10.1002/adma.73394 · Cited by 4
“The demand for bioinks with rapid yet controllable gelation kinetics, high shape fidelity, and cytocompatibility created an ideal application space [6, 99, 138].”
Zamora‐Ledezma, C., Solano-Orrala, D., Peña-Jiménez, D., Herranz-Gómez, S., Silva-Cullishpuma, D. A., Mercader‐Ros, M. T., d’Ayala, G. G., Duraccio, D., Mowbray, D. J., Díaz-López, S. M., et al. (2026) · ACS Omega · doi:10.1021/acsomega.6c05484 · Cited by 2
Self-citationTiwari, N., & Singh, N. (2026) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2026.153275 · Cited by 2
Emerging Trends in Fully Three-Dimensional-Printed Functional Biomedical Systems-A Review
Jahan, Z., Tyagi, R., Ghising, S., Kumar, N., Narayana, T., Tripathi, A. K., & Verma, A. V. (2026) · Journal of Medical Devices · doi:10.1115/1.4070944 · Cited by 2
Byrne, R., Redmond, J., Rochfort, K. D., Carrico, A., Forster, R. J., Dunne, N., & Cumba, L. R. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c02097 · Cited by 2
“5 Cross-linking adds further complexity, as extrusion-based inks must balance low viscosity for deposition with sufficient postprinting stability and cell bioactivity.”
Engineering the cartilage niche: Mimicking the microenvironment for functional outcomes
Talouki, P. Y., Tamimi, R., & Mahmoodi, M. (2026) · Tissue and Cell · doi:10.1016/j.tice.2026.103405 · Cited by 3
A toolbox for microvalve-based bioprinting
Derman, İ. D., Sarıkaya, M. D., Yilmaz, Y. O., Gupta, D., Rizvi, S. H. A., Rivera, T., & Ozbolat, I. T. (2026) · Biofabrication · doi:10.1088/1758-5090/ae54d1 · Cited by 1
Pint, D., Steindorfer, T., Lackner, F., Mohan, T., Gruber‐Wölfler, H., Kargl, R., & Kleinschek, K. S. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c02127 · Cited by 1
3D-bioprinting for joint regeneration
Li, W., Wang, Y., Cui, Y., Wu, Q., Ying, P., Dai, K., & Sun, Y. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1742269 · Cited by 3
Niu, L., Wang, Z., Su, J., Wang, Y., Niu, X., Xu, Y., & Qi, Y. (2026) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2026.100894 · Cited by 1
Urdaneta, C. V., & Barros, M. T. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1784513 · Cited by 2
“Accordingly, WSS is interpreted here as a comparative indicator of relative shear exposure rather than as a universal damage threshold (Elango and Zamora-Ledezma, 2025).”
Phan, N. T. H., Nguyen, N. T., Tran, H. L. B., & Nguyen, M. T. H. (2026) · Polymers · doi:10.3390/polym18111331 · Cited by 1
“This preservation of flow properties is critical, as of bioactive molecules can modify bioink rheology in ways that hinder consistent extrusion [40].”
Towards a bioengineered airway: advances in tracheal tissue engineering and biofabrication
Prasad, P. R., Sahni, P. K., Mondal, D., Vasanthan, K. S., Varadharajan, S., Kumar, A., Shridhar, N. B., Kumar, N. A. N., Bisht, B., Paul, K., et al. (2026) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2026.1713743 · Cited by 4
Madar, I. H., Pawar, J., Muruganantham, P., Ahmed, S. S., Vohra, V., & Velayudam, J. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1854783 · Cited by 1
Miao, D., Suo, X., Geng, X., Yang, Y., Wang, G., Zhou, Y., Jia, Y., Yang, S., Li, H., & Li, G. (2026) · Journal of Nanobiotechnology · doi:10.1186/s12951-026-04759-7 · Cited by 1
“Previous studies have highlighted that while natu-ral polymers generally possess favorable safety profiles, chemical modifications and high concentrations of nanovesicles can occasionally induce unforeseen cellular stress or immune reactions [65].”
Mohammed, A., Gibbons, H., Holanda, T. M., Salazar, N., Saliim, E., Taylor, D. K., & Riaz, U. (2026) · Materials · doi:10.3390/ma19142957 · Cited by 1
“In addition, bioinks should support cell adhesion [7], proliferation [8], differentiation [9], and extracellular matrix formation [10] after printing.”
Norouzi, M., Dehnad, D., Assadpour, E., & Jafari, S. M. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.116043 · Cited by 1
Bankhede, H. K., Sivaravi, M., Raiturker, A. P., Bhende, P. P., Kale, S. B., Tari, M. K., Shaukat, A., & Ganguly, A. (2026) · Journal of Biological Engineering · doi:10.1186/s13036-026-00749-3 · Cited by 1
“Rapid viscosity recovery after extrusion is essential to prevent structural collapse and to help the printed filament retain its shape [31].”
Zamora‐Ledezma, C., Solano-Orrala, D., Leguineche, J. J., Molleja, J. G., Fernandéz‐Blázquez, J. P., Guzmán, M. B., Romero‐Pozuelo, J., Baquero, M.-R., Lorenzo‐Aparicio, C., Martínez-Hernandez, J. M., et al. (2026) · Applied Biosciences · doi:10.3390/applbiosci5030082 · Cited by 1
Self-citationAntunes, B. S. L., Pedrini, F., Komatsu, D., Asami, J., Dicko, C., & Duek, E. A. R. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.154129
From Scaffolds to Complex Systems: Functional Biomaterials in Regenerative Medicine
Scheau, C., Didilescu, A. C., & Căruntu, C. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17010051
“These concepts align with recent papers, which have also signaled the necessity of consistent progress in this direction [11,12].”
Elumalai, K. (2026) · Chinese Journal of Plastic and Reconstructive Surgery · doi:10.1016/j.cjprs.2026.02.005
From 3D printing to 3D Bioprinting: Principles and applications in dentistry
Zhu, H., Ma, H., Chen, Y., Wei, Y., Tang, Z., & Li, Q. (2026) · Materials Today Sustainability · doi:10.1016/j.mtsust.2026.101372 · Cited by 1
Huang, F., Wei, G., Zhang, Y., Wu, B., Chen, Y.-Q., Qiu, Y., Li, J., & Wu, G. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177300
Next-generation immune models: bioinks, 3D bioprinting, and future directions
Joseph, J. P., Gugulothu, S. B., Nandi, D., & Chatterjee, K. (2026) · Trends in biotechnology · doi:10.1016/j.tibtech.2026.04.017 · Cited by 1
Machine learning approaches for optimizing bioprinting processes: A comprehensive review
Jaya, S. V., Chekkaramkodi, D., & Butt, H. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.103245 · Cited by 1
Three-Dimensional Printing in Trichology: A Narrative Mini-Review – Where Are We Now?
Yamhure, F. M., & Grimalt, R. (2026) · Skin Appendage Disorders · doi:10.1159/000552653
3D Bioprinting of Gradient Scaffolds with Biomimetic Capillaries for Osteochondral Regeneration
Liang, F. (2026) · BIO Web of Conferences · doi:10.1051/bioconf/202623703013
El‐Husseiny, H. M., Bektik, E., Mady, E. A., Doghish, A. S., Sallam, A.-A. M., Elazazy, O. E., Said, A. R., Sharun, K., Marzok, M., El‐Dakroury, W. A., et al. (2026) · Journal of Pharmaceutical Innovation · doi:10.1007/s12247-026-10855-w
Scrocciolani, C., Caserio, L., Grillo, S., Ottavi, F., Masi, I., Jacchetti, E., Vangosa, F. B., Raimondi, M. T., Colosimo, B. M., Rosanò, L., et al. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.6c00299 · Cited by 2
Shankhwar, N., Singh, S. S., & Prasad, A. (2026) · De Gruyter eBooks · doi:10.1515/9783111719993-014
Use of Artificial Intelligence in Biofabrication
Uysal, G., Elçin, A. E., & Elçin, Y. M. (2026) · Stem cell biology and regenerative medicine · doi:10.1007/978-3-032-30294-6_16
Park, C. H., & Hong, I. (2026) · Interdisciplinary medicine · doi:10.1002/inmd.70157
Choi, T., & Lee, H. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.103475
“This observation is consistent with graded-interface concepts in which gradual property transitions can reduce strain localization and stress concentration associated with abrupt material mismatch [40,41,48].”
Three-Dimensional Bioprinting-Enabled Organoids for Engineering the Tumor Microenvironment
Li, Y., Shi, J., Zhang, Q., Huang, H., & Zhou, S. H. E. N. G. H. (2026) · Tissue Engineering Part B Reviews · doi:10.1177/19373368261469463 · Cited by 1
Ding, C., Luo, Y., Yu, X., Lei, Y., Zhang, W., Wang, X., & Gan, J. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1884032 · Cited by 1
Solvent-engineered hydrogels: A multiscale design framework for bone regeneration
Rial, R., Saremi, A. R., & Ruso, J. M. (2026) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2026.104007
Advancing bone bioprinting with nanoclay bioinks: from formulation to translation
Waidi, Y. O., & Chatterjee, K. (2026) · Virtual and Physical Prototyping · doi:10.1080/17452759.2026.2710943
Lipowska-Kur, D., Otulakowski, Ł., Groch, P., Simińska‐Stanny, J., Filipek, K., Sieroń, Ł., Jelonek, K., Shavandi, A., & Utrata‐Wesołek, A. (2026) · Journal of Materials Chemistry B · doi:10.1039/d6tb01442a
Ye, M., Cui, G., Zhu, Z., Zheng, W., He, H., & Xiao, J. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c00462
Demiray, E. B., Hwang, J., Baek, S. E., Lee, S., Oh, N., Jang, H. J., Kim, Y. H., Choi, J., Nam, S. Y., Kang, M. S., et al. (2026) · Small Structures · doi:10.1002/sstr.70575 · Cited by 2
“An ideal bioink should exhibit appropriate viscoelastic behavior to prevent nozzle clogging during printing, maintain shape stability after printing, and simultaneously provide a microenvironment that supports cell viability, proliferation, and myogenic differentiation [9, 10].”
Ahn, M., Park, G. T., Lee, D., Yoon, S., Oh, S., Kim, J. H., & Kim, B. S. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71616
Sadlik, B., Magdalena, M., Klon, W., Stodolak‐Zych, E., & Rawojć, K. (2026) · Bioengineering · doi:10.3390/bioengineering13090995
“Machine learning approaches are emerging as a powerful tool to predict printability from bulk rheological data [50].”
Nowakowski, S., Leikeim, A., Gatenholm, P., & Kluger, P. J. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1923018
Bioprinting the Craniofacial Region: A New Era in Regenerative Medicine and Dentistry
Abuarqoub, D. A., Ahmed, M. E., Abuarqoub, A. H., Ellauzi, M. F., & Maragha, T. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17090459
“The high cost of bioinks is reflective of the complexity involved in the processes of synthesizing bioinks that ensure printability, shape fidelity, and structural integrity, while simultaneously maintaining high cell viability, proliferation, and tissue maturation [11].”
Walecki, P., Guła, A., Rosowicz, M., Żuk, R., & Proniewska, K. K. (2026) · Bioengineering · doi:10.3390/bioengineering13091064
Huang, Y., Zhang, T., Chen, S., Zhou, H., Xu, H., Zhang, F., Li, L., & Lyu, F. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.103676
“Mineral fillers can support osteoconduction and nucleation, but excessively stiff or densely crosslinked inks may inhibit cell spreading and endogenous matrix assembly [184,185].”
Almajidi, Y. Q., Soonmin, H., Baig, M. R., Acharya, R. N., Juneja, S., Sapaev, I., Nematov, O., Saxena, R., Astaneh, M. E., & Fereydouni, N. (2026) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2026.2734517
3D Bioprinting for Breast Cancer Modelling, Diagnosis, Therapeutic Testing, and Clinical Translation
Turkson, V. A., Díaz-Cruces, E., García, C. D. L. M., Troconis, J., Casanova-Carvajal, Ó., Díaz-López, S. M., Uriarte, J. J., Rodríguez-Díaz, J. M., Sousa, F. B. D., & Zamora‐Ledezma, C. (2026) · Journal of Composites Science · doi:10.3390/jcs10100519
Self-citationAdvanced cell-instructive bio-inks: Engineering multiscale niches for functional tissue formation
Ng, W. L., Xu, Y., Liu, F., & Bártolo, P. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2026.10.002 · Cited by 1
“Additional signalling molecules, cellular components, or matrix constituents may increase functional complexity but can also introduce competing biological effects, formulation instability, manufacturing variability, and challenges in quality control [93].”
Extrusion‐Based Bioprinting of Living Bioinks for Tissue and Organ Engineering
Silberman, E., Baruch, E., Cohen, R., Shapira, A., & Dvir, T. (2026) · Advanced Materials Technologies · doi:10.1002/admt.71405
Hassna, E., Muhammad, H., & Yan, T. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00507
Nanocellulose-based 3D printing inks: From material design to biomedical applications
Sheng, M., Yang, C., Yang, B., Duan, G., Xiaoshuai, H., Zhang, C., He, S., & Jiang, S. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125971
Wang, X., Zhang, X., Wang, G., Feng, B., & Zhang, Y. (2026) · Biomimetics · doi:10.3390/biomimetics11100763
“Therefore, nozzle size should be balanced against cell viability [34,35,64].”
Extrusion-based bioprinting for functional tissue reconstruction: design strategies and applications
Liu, H., Pan, X., Mei, X., Cheng, L., Zhao, Z., Wang, S., Su, X., Tian, W., & Liao, L. (2026) · Journal of Materials Chemistry B · doi:10.1039/d6tb01859a
Shah, J. R., Pathuri, S., Sharma, R., Skottman, H., Mörö, A., Karamichos, D., Choi, A. J. S., Ong, J., Mehta, J. S., Shrivastava, A., et al. (2026) · Progress in Retinal and Eye Research · doi:10.1016/j.preteyeres.2026.101538
Metadata
- Authors
- Elango, J., & Zamora-Ledezma, C.
- Affiliations
- Universidad Católica de Murcia (ES)
- Bioengineering & Regenerative Medicine Research Group (Bio-ReM), Escuela de Ingeniería, Arquitectura y Diseño (EIAD), Universidad Alfonso X el Sabio (UAX), Avenida de la Universidad 1, Villanueva de la Cañada, 28691 Madrid, Spain
- Corresponding author
- Elango, Jeevithan
- Venue
- Gels
- Publisher
- MDPI AG
- Published
- 2025-08-19
- Volume
- 11
- Issue
- 8
- Pages
- 659
- ISSN
- 2310-2861 (ISSN-L)
- PMC
- PMC12385449
- OpenAlex
- W4413309813
- Cited by
- 75
- References
- 121
- Citations by year
- 2026: 71 · 2025: 4
- FWCI
- 6.01
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Gels (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Era-Min Cofund 2023 (MCIU/AEI/10.13039/501,100,011,033/UE)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- 3D bioprinting, rheology, printability, cell viability, cell proliferation, tissue maturation, vascularization, shape fidelity, structural integrity, regenerative medicine
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.