Rheological, Structural, and Biological Trade-Offs in Bioink Design for 3D Bioprinting
Open accessThe DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Abstract
Bioinks represent the core of 3D bioprinting, as they are the carrier responsible for enabling the fabrication of anatomically precise, cell-laden constructs that replicate native tissue architecture. Indeed, their role goes beyond structural support, as they must also sustain cellular viability, proliferation, and differentiation functions, which are critical for applications in the field of regenerative medicine and personalized therapies. However, at present, a persistent challenge lies in reconciling the conflicting demands of rheological properties, which are essential for printability and biological functionality. This trade-off limits the clinical translation of bioprinted tissues, particularly for vascularized or mechanically dynamic organs. Despite huge progress during the last decade, challenges persist in standardizing bioink characterization, scaling production, and ensuring long-term biomimetic performance. Based on these challenges, this review explores the inherent trade-off faced by bioink research optimizing rheology to ensure printability, shape fidelity, and structural integrity, while simultaneously maintaining high cell viability, proliferation, and tissue maturation offering insights into designing next-generation bioinks for functional tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 (A) Anti-oxidative bioinks (methacrylate-modified rutin-glycidyl methacrylate silk fibroin) for cartilage tissue engineering application [86]. (B) Visualization of cartilage with C28/I2 chondrocytes on decellularized scaffold by scanning electron microscopy. Cells attached to scaffold after 1 week in culture. (Scale bar = 20 µm) [105]. (C) Biocompatibility (i) Cell viability by Live/dead cell staining,(scale bars = 200 µm)) and (ii) chondrogenic inductivity of methacrylated cartilage extracellular matrix constructs stained for type I and II collagens and sGAGs (scale bars = 100 µm) [106]. Adapted under open access Creative Commons CCBY 4.0 license/ through open access permission from Refs. [86,105,106].](https://figures.cochat.ai/paper-figures/6419d5c480114c6597e1309711d2472b/rheological-structural-and-biological-trade-offs-in-bioink-design-for-3d-figure-3.jpg)
![Figure 4 (A) Omentum decellularization and ECM hydrogel generation. (i)—Native omentum, (ii)—De cellularized omentum, (iii)—Representative hrSEM image of the hydrogel. Scale bar = 1 µm. (B) (i)—YIGSR-alginate gel generation schematics and (ii)—Adhesion of iPSCs-derived ECs to pristine (left) and modified alginate (right) sheets, 4 h post-seeding. (scale bar = 100 μm) (C) The 3D printed vascularized patches. (i) The bioinks that were used in the printing process. (ii) Schematics of the patch bioprinting process. (iii) Viability after printing. (iv) Representative fluorescence image of two printed large blood vessels stained for F-actin and DAPI after 14 days in culture (scale bar = 100 μm). (v) Representative fluorescence image of a printed large blood vessel and surrounding capillary-like structures stained for F-actin and DAPI after 14 days in culture (scale bar = 100 μm). (vi) Representative 3D confocal images of a 3D printed blood vessel immunostained for the endothelial cell marker CD31 after 14 days in culture, EC monolayer zoom-in image (top), a zoom-in image showing EC sprouting from the blood vessel wall (bottom) (scale bars = 100 μm). (vii) Representative 3D confocal images of a 3D printed blood vessel immunostained for CD31 after 14 days in culture (scale bar = 100 μm) [64]. Adapted under open access Creative Commons CCBY 4.0 license/through open access permission from Ref. [64].](https://figures.cochat.ai/paper-figures/c877975824ed44b08ea2c19f2af134e4/rheological-structural-and-biological-trade-offs-in-bioink-design-for-3d-figure-4.jpg)
![Figure 5 (A) 3D printed PLA-45S5 BG scaffolds. (i)—CAD render of PLA-BG scaffolds with a pore size of width = 750 μm, (ii)—FDM 3D printed PLA-BG scaffolds (PLA-0%, PLA-1%, PLA-2.5%, PLA-5%, and PLA-10%), Scale bars: 500 μm, (iii)—Top view light microscopy image of a PLA-BG scaffold. Scale bar: 2 mm. (iv–vii): Printability assessment and porosity analysis of PLA-BG scaffolds. ** p < 0.01, **** p < 0.0001 indicate statistical significant difference of means in comparison to 3D printed 0% BG PLA by one-way ANOVA or Welch’s t-test in pairwise comparisons of scaffold side pore diameter. (B) Mechanical properties of 3D printed PLA-45S5 BG scaffolds, (i)—Macroscopic images illustrating different failure modes of 1 and 10% (wt), (ii)—Qualitative stress strain diagram, (iii)—Compression strength and modulus of elasticity of 3D printed PLA-BG scaffolds. (C) Fluorescence microscopy images of Calcein AM (green)/DAPI (blue) stained MC3T3E1 on 3D printed PLA-BG scaffolds (Scale bar: 200 μm). Adapted under open access Creative Commons CCBY 4.0 license/through open access permission from Ref. [116].](https://figures.cochat.ai/paper-figures/e347204b64c7429692c36548930a4536/rheological-structural-and-biological-trade-offs-in-bioink-design-for-3d-figure-5.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Among the available techniques, extrusion-based bioprinting is the most widely used owing to its versatility and compatibility with hydrogel-based bioinks [4,5,6].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [4]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915 · cited 1×
“It is noted that more rigid matrices have been shown to promote the osteogenic differentiation of mesenchymal stem cells (MSCs), while softer matrices are more conducive to neurogenic differentiation [75].”
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146 · cited 1×
“For instance, Yue et al. [88] revealed that increasing photo-crosslinking in GelMA bioink improved mechanical stability but impeded cell migration and proliferation, highlighting the necessity of precisely adjusting crosslinking density to facilitate tissue development.”
Malafaya, P. B., Silva, G. A., & Reis, R. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.012 · Cited by 1,401 · cited 1×
“…as collagen, alginate, gelatin, and hyaluronic acid provide an environment conducive to cell attachment and tissue remodeling, while synthetic polymers such as polyethylene glycol (PEG) and polycaprolactone (PCL) offer tunable mechanical properties suitable for structural reinforcement [18–21].”
Lee, K., Silva, E. A., & Mooney, D. J. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0223 · Cited by 1,386 · cited 1×
“At the core of this innovative approach lies bioinks, a specialized material formulation designed to encapsulate and deliver cells, growth factors, and bioactive molecules to a designated location with spatial control [6,7].”
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045 · cited 1×
“Studies have shown that lower extrusion pressures and controlled deposition rates enhance cell viability while maintaining print fidelity [53].”
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950 · cited 1×
“Paxton et al. [95] emphasized the need for standardized methods to evaluate printability and shape fidelity, underscoring the importance of rheological assessment and predictive modeling in the design of next-generation bioink.”
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863 · cited 1×
“…ease with which it can flow through the printing nozzle; a high-viscosity bioink may hinder extrusion, requiring excessive force that could compromise cell viability, while a low-viscosity bioink may lead to excessive spreading, resulting in poor print resolution and structural instability [15].”
Strategies for controlled delivery of growth factors and cells for bone regeneration
Vo, T. N., Kasper, F. K., & Mikos, A. G. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.01.016 · Cited by 666 · cited 1×
“The delivery of these factors can be enhanced by employing combinations of growth factors or by integrating small molecules that influence cell signaling pathways [80].”
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630 · cited 1×
“Additionally, the use of microfluidic channels within the bioprinted construct can provide direct nutrient delivery [69].”
Rheology and the breadmaking process
Dobraszczyk, B. J., & Morgenstern, M. P. (2003) · Journal of Cereal Science · doi:10.1016/s0733-5210(03)00059-6 · Cited by 608
Natural polymers for the microencapsulation of cells
Gasperini, L., Mano, J. F., & Reis, R. L. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0817 · Cited by 602
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600 · cited 1×
“Furthermore, the mechanical properties of the bioinks can be adjusted by altering the polymer concentration, crosslinking density, and incorporating reinforc-Gels ing agents such as nanoparticles or microfibers [76].”
Natural and Synthetic Polymers for Biomedical and Environmental Applications
Satchanska, G., Davidova, S., & Petrov, P. D. (2024) · Polymers · doi:10.3390/polym16081159 · Cited by 585
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., De Coppi, P., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 563 · cited 1×
“Bioprinting provides precise control over the bioink’s 3D architecture, allowing for the fabrication of intricate tissue structures that closely resemble the native tissue environment [81].”
Graphene Nanomaterials: Synthesis, Biocompatibility, and Cytotoxicity
Liao, C., Li, Y., & Tjong, S. C. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19113564 · Cited by 540 · cited 1×
“In another study, the addition of nanomaterials, like graphene oxide, has further improved mechanical properties without sacrificing cytocompatibility [92].”
Enabling Technologies for Personalized and Precision Medicine
Ho, D., Quake, S. R., McCabe, E. R. B., Chng, W. J., Chow, E. K., Ding, X., Gelb, B. D., Ginsburg, G. S., Hassenstab, J., Ho, C.-M., et al. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.021 · Cited by 517 · cited 1×
“Furthermore, patient-specific tissue constructs hold great promise for precision medicine, enabling tailored treatments based on an individual’s biological profile [11–13].”
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495 · cited 1×
“Understanding the rheological behavior of bioinks is essential for optimizing their performance in extrusion-based 3D bioprinting applications), where material flow properties directly influence printability, structural fidelity, and biological functionality [25–27].”
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465 · cited 1×
“Furthermore, the surface properties of the bioink can be modified to enhance cell adhesion, for example, through plasma treatment or coating with ECM proteins like fibronectin and laminin [65,66].”
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448 · cited 1×
“The rheological properties of bioink exert interconnected influences on extrusion dynamics, print fidelity, and shape retention through complex mechanisms that govern material flow behavior during the printing process and subsequent structural stability [34,35].”
Chen, D. T. N., Wen, Q., Janmey, P. A., Crocker, J. C., & Yodh, A. G. (2010) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-070909-104120 · Cited by 398 · cited 3×
“In the context of bioinks, it has been reported that such materials exhibiting pronounced shear-thinning properties demonstrate enhanced printability while preserving cell viability through reduced mechanical stress during processing [32].”
Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 377 · cited 1×
“Studies have shown that highly porous bioinks facilitate nutrient diffusion and waste removal, improving overall cell viability and proliferation [52,56,57].”
Bone Morphogenetic Protein-2 in Development and Bone Homeostasis
Halloran, D., Durbano, H. W., & Nohe, A. (2020) · Journal of Developmental Biology · doi:10.3390/jdb8030019 · Cited by 348 · cited 1×
“For example, bone morphogenetic protein-2 (BMP-2) is frequently utilized to promote osteogenic differentiation [78].”
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336 · cited 1×
“Khalid et al. [101] highlighted the promise of shape-memory polymers and multi-material constructs for customized implants tailored to individual patients.”
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255 · cited 1×
“Additionally, the bioinks must possess gelation kinetics that enables rapid solidification or crosslinking upon printing, stabilizing the printed construct and preventing deformation or collapse before tissue maturation [16,17].”
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 237 · cited 1×
“…engineering methods, which often rely on manual assembly and scaffolding techniques, 3D bioprinting enables the precise deposition of biomaterials and living cells in a layer-by-layer fashion, mimicking the intricate structural and functional characteristics of native tissues and organs [4,5].”
Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
Dzobo, K., Motaung, K. S. C. M., & Adesida, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20184628 · Cited by 231 · cited 1×
“In addition, bioinks must possess a controlled degradation rate, ensuring that as the scaffold degrades, new cells can replace it with their own ECM [51,60,61].”
Stimuli-Responsive Hydrogels: The Dynamic Smart Biomaterials of Tomorrow
Neumann, M., di Marco, G., Iudin, D., Viola, M., van Nostrum, C. F., van Ravensteijn, B. G. P., & Vermonden, T. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00967 · Cited by 229 · cited 1×
“Neumann et al. [100] demonstrated that intelligent hydrogels can replicate the dynamic ECM, aiding in the creation of shape-morphing tissue constructs.”
Three-dimensional bioprinting in tissue engineering and regenerative medicine
Gao, G., & Cui, X. (2016) · Biotechnology Letters · doi:10.1007/s10529-015-1975-1 · Cited by 227
Dynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223 · cited 1×
“Additionally, methods like dynamic crosslinking can be employed to develop bioinks with mechanical properties that change over time, simulating the dynamic variations found in the native tissue environment [77].”
Kim, B. S., Kim, H., Gao, G., Jang, J., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e98 · Cited by 206 · cited 1×
“In addition, bioinks must possess a controlled degradation rate, ensuring that as the scaffold degrades, new cells can replace it with their own ECM [51,60,61].”
Current standards and ethical landscape of engineered tissues—3D bioprinting perspective
Sekar, M. P., Budharaju, H., Zennifer, A., Sethuraman, S., Vermeulen, N., Sundaramurthi, D., & Kalaskar, D. M. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211027677 · Cited by 195 · cited 2×
“The regulatory framework must balance innovation support with patient safety, requiring adaptive approaches that can evolve with technological advancement while maintaining rigorous safety standards [122].”
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Cidonio, G., Alcala-Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y.-H., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 190 · cited 1×
“Growth factors like vascular endothelial growth factor (VEGF) for osteogenic and angiogenic tissue formation [73] and transforming growth factor-β (TGF-β ) for cartilaginous tissues [74] can be incorporated.”
Empowering Precision Medicine: The Impact of 3D Printing on Personalized Therapeutic
Alzoubi, L., Aljabali, A. A. A., & Tambuwala, M. M. (2023) · AAPS PharmSciTech · doi:10.1208/s12249-023-02682-w · Cited by 188
Lee, J., Oh, S. J., An, S. H., Kim, W.-D., & Kim, S.-H. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8707 · Cited by 184 · cited 1×
“Meanwhile, Lee et al. [104] showed that ML-driven design strategies could pinpoint optimal formulations by examining the connections between mechanical properties, print-ability, and cell viability.”
Kim, Y. B., Lee, H., & Kim, G. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11669 · Cited by 179 · cited 2×
“Studies have shown that highly porous bioinks facilitate nutrient diffusion and waste removal, improving overall cell viability and proliferation [52,56,57].”
Subbiah, R., & Guldberg, R. E. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801000 · Cited by 178 · cited 1×
“At the core of this innovative approach lies bioinks, a specialized material formulation designed to encapsulate and deliver cells, growth factors, and bioactive molecules to a designated location with spatial control [6,7].”
ECM in Differentiation: A Review of Matrix Structure, Composition and Mechanical Properties
Padhi, A., & Nain, A. S. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-019-02337-7 · Cited by 177 · cited 2×
“Recent research indicated that integrated decellularized ECM-synthetic polymers (PEG/PCL) hybrid systems enhanced vascularization, osteogenesis, and long-term tissue viability [87].”
Mirshafiei, M., Rashedi, H., Yazdian, F., Rahdar, A., & Baino, F. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112853 · Cited by 177 · cited 1×
“…engineering methods, which often rely on manual assembly and scaffolding techniques, 3D bioprinting enables the precise deposition of biomaterials and living cells in a layer-by-layer fashion, mimicking the intricate structural and functional characteristics of native tissues and organs [4,5].”
Serafin, A., Culebras, M., & Collins, M. N. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123438 · Cited by 167 · cited 1×
“…as collagen, alginate, gelatin, and hyaluronic acid provide an environment conducive to cell attachment and tissue remodeling, while synthetic polymers such as polyethylene glycol (PEG) and polycaprolactone (PCL) offer tunable mechanical properties suitable for structural reinforcement [18–21].”
Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels
Bercea, M. (2023) · Molecules · doi:10.3390/molecules28062766 · Cited by 163 · cited 2×
“This temporal aspect of rheological behavior is particularly valuable for controlling material properties throughout the printing process and subsequent maturation phases [14,28,29].”
Zandi, N., Sani, E. S., Mostafavi, E., Ibrahim, D. M., Saleh, B., Shokrgozar, M. A., Tamjid, E., Weiss, P. S., Simchi, A., & Annabi, N. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2020.120476 · Cited by 162 · cited 1×
“However, Zandi et al. [93] disclosed that shear-thinning bioink, although advantageous for extrusion, subjected cells to mechanical stress could impact their viability.”
Asadpour, S., Kargozar, S., Moradi, L., Ai, A., Nosrati, H., & Ai, J. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.003 · Cited by 161 · cited 1×
“Hydrogels such as alginate, gelatin, and silk fibroin have been widely used to create porous microenvironments that support cell growth [1,58,59].”
Distler, T., Fournier, N., Grünewald, A., Polley, C., Seitz, H., Detsch, R., & Boccaccini, A. R. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00552 · Cited by 158
Karimi, F., O'Connor, A. J., Qiao, G. G., & Heath, D. E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701324 · Cited by 154
Das, S., Kim, S.-W., Choi, Y.-J., Lee, S., Lee, S.-H., Kong, J.-S., Park, H.-J., Cho, D.-W., & Jang, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.026 · Cited by 150 · cited 1×
“Das et al. [94] showed that bioink derived from decellularized ECM provide superior biological performance but necessitate further crosslinking to achieve mechanical stability.”
In vivo printing of growth factor-eluting adhesive scaffolds improves wound healing
Nuutila, K., Samandari, M., Endo, Y., Zhang, Y., Quint, J., Schmidt, T. A., Tamayol, A., & Sinha, I. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.030 · Cited by 148
Theus, A. S., Ning, L., Hwang, B., Gil, C., Chen, S., Wombwell, A., Mehta, R., & Serpooshan, V. (2020) · Polymers · doi:10.3390/polym12102262 · Cited by 147 · cited 1×
“Additionally, mechanical properties, including elasticity and stiffness, should closely mimic those of the target tissue, providing support to the printed structure during maturation and fostering cellular interactions [83–86].”
Bioink Formulation and Machine Learning-Empowered Bioprinting Optimization
Freeman, S. R., Calabro, S., Williams, R., Jin, S., & Ye, K. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.913579 · Cited by 144 · cited 1×
“In most recent times, the combination of artificial intelligence (AI) and machine learning (ML) is transforming the development of bioinks [102,103].”
Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine
Fonseca, A. C., Melchels, F. P. W., Ferreira, M. J. S., Moxon, S. R., Potjewyd, G., Dargaville, T. R., Kimber, S. J., & Domingos, M. A. N. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00342 · Cited by 143
Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks
Brunel, L. G., Hull, S. M., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6bbe · Cited by 119 · cited 1×
“Brunel et al. [98] reported that these materials offered temporary structural support and eliminated after printing without affecting cell viability.”
Strain Dependence of the Viscoelastic Properties of Alginate Hydrogels
Webber, R. E., & Shull, K. R. (2004) · Macromolecules · doi:10.1021/ma049274n · Cited by 113 · cited 1×
“Similarly, Webber and Shull [89] disclosed that the relationship between viscosity, print speed, and applied pressure influences print fidelity in alginate hydrogels, while Kafili et al. [90] demonstrated that higher levels of decellularized amniotic membrane (dAM) enhanced mechanical strength but…”
Sacrificial microgel-laden bioink-enabled 3D bioprinting of mesoscale pore networks
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., Liu, Z., Xiang, L., & He, Y. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00062-y · Cited by 111 · cited 1×
“Techniques such as incorporating sacrificial materials (microparticles or fibers) that are later removed to create interconnected pores can enhance nutrient transport [68].”
Feng, Q., Li, D., Li, Q., Li, H., Wang, Z., Zhu, S., Lin, Z., Cao, X., & Dong, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01295 · Cited by 107 · cited 1×
“Controlled release of these factors can be achieved through various methods, such as encapsulation within microparticles or covalent attachment to the bioinks matrix [71,72].”
Ahlfeld, T., Cubo-Mateo, N., Cometta, S., Guduric, V., Vater, C., Bernhardt, A., Akkineni, A. R., Lode, A., & Gelinsky, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00710 · Cited by 106 · cited 2×
“Cells need to attach to the bioink matrix to maintain their position and interact with their surroundings, a prerequisite for proper differentiation [62–65].”
Ko, K. R., Lee, J.-H., Lee, D., Nho, B., & Kim, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-26704-x · Cited by 99 · cited 1×
“Other notable examples are nerve growth factor (NGF) for neuronal differentiation and hepatocyte growth factor (HGF) for liver tissue engineering [79].”
Hajiabbas, M., Alemzadeh, I., & Vossoughi, M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116465 · Cited by 95 · cited 1×
“Hydrogels such as alginate, gelatin, and silk fibroin have been widely used to create porous microenvironments that support cell growth [1,58,59].”
Gorroñogoitia, I., Urtaza, U., Zubiarrain-Laserna, A., Alonso‐Varona, A., & Zaldua, A. M. (2022) · Polymers · doi:10.3390/polym14020354 · Cited by 94 · cited 1×
“Gorroñogoitia et al. [85] fabricated alginate-based bioink by 3D Bioprinting for articular cartilage tissue engineering and evaluated the rheological and mechanical properties of alginate hydrogels, focusing on viscosity, cross-linking conditions, and structural integrity.”
Ng, W. L., Huang, X., Shkolnikov, V., Suntornnond, R., & Yeong, W. Y. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00245-3 · Cited by 91 · cited 1×
“Additionally, bioinks can be supplemented with amino acids, glucose, and oxygen-releasing agents to sustain cellular metabolism and promote expansion [54].”
Candidate Bioinks for Extrusion 3D Bioprinting—A Systematic Review of the Literature
Tarassoli, S. P., Jessop, Z. M., Jovic, T. H., Hawkins, K. M., & Whitaker, I. S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.616753 · Cited by 84 · cited 1×
“A well-designed bioinks should exhibit interconnected pores that allow cells to spread, interact, and form tissue-like structures [55].”
3D bioprinting for modelling vasculature
Sasmal, P., Datta, P., Wu, Y., & Ozbolat, I. T. (2018) · Microphysiological Systems · doi:10.21037/mps.2018.10.02 · Cited by 80 · cited 1×
“The addition of microchannels, perfusable vascular networks, and spatially defined niches can further improve the physiological relevance of the bioprinted construct [82].”
Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters
Sánchez-Sánchez, R., Rodríguez-Rego, J. M., Macías-García, A., Mendoza-Cerezo, L., & Díaz-Parralejo, A. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.687 · Cited by 76 · cited 1×
“…the print fidelity and shape retention in extrusion-based bioprinting are governed by the complex balance between yield stress, recovery kinetics, and gelation behavior that determines how effectively printed structures maintain their intended geometry throughout the fabrication process [39,40].”
Reverse thermo-responsive hydrogels prepared from Pluronic F127 and gelatin composite materials
Yeh, M., Zhao, J.-Y., Hsieh, Y.-R., Lin, J.-H., Chen, F.-Y., Chakravarthy, R. D., Chung, P.-C., Lin, H., & Hung, S. (2017) · RSC Advances · doi:10.1039/c7ra01118k · Cited by 75
Behan, K., Dufour, A., Garcia, O., & Kelly, D. J. (2022) · Biomolecules · doi:10.3390/biom12020216 · Cited by 71 · cited 1×
“Behan et al. [106] developed a favorable rheological characterization of a methacry-lated cartilage ECM-based bioink for cartilage tissue engineering with different percentages of porcine articular cartilage dECM and gelatin, both with and without methacrylation.”
Stepwise Control of Crosslinking in a One‐Pot System for Bioprinting of Low‐Density Bioinks
Soliman, B. G., Lindberg, G. C. J., Jüngst, T., Hooper, G. J., Gröll, J., Woodfield, T. B. F., & Lim, K. S. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901544 · Cited by 69 · cited 1×
“For instance, Soliman et al. [91] presented a dual-step crosslinking system for gelatin-based bioink, which allows for precise control of viscosity and enhanced shape retention, leading to constructs that exhibit both high fidelity and excellent cell viability.”
Rasekh, M., Arshad, M. S., & Ahmad, Z. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17040456 · Cited by 68 · cited 1×
“The significance of bioink development extends beyond regenerative medicine, encompassing diverse applications such as drug screening, disease modeling, personalized tissue implants, and organ replacement [8–10].”
Bioink Formulations for Bone Tissue Regeneration
Li, N., Guo, R., & Zhang, Z. J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.630488 · Cited by 67 · cited 1×
“Li et al. [115] reviewed hydrogel-based bioink for bone tissue regeneration, emphasizing the importance of shear-thinning behavior and rapid gelation kinetics to support multilayered constructs with embedded stem cells.”
Characterization of Biocompatibility of Functional Bioinks for 3D Bioprinting
Kim, J. (2023) · Bioengineering · doi:10.3390/bioengineering10040457 · Cited by 62
Heterogeneous and Composite Bioinks for 3D-Bioprinting of Complex Tissue
Rasouli, R., Sweeney, C. L., & Frampton, J. P. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00171-7 · Cited by 61 · cited 1×
“For instance, Rasouli et al. [96] examined nanofillers using carbon nanotubes, graphene oxide, and gold nanoparticles for improved conductivity, strength, and cell–matrix interactions, while facilitating stimuli-responsive behavior.”
Tethered TGF-β1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues
Hauptstein, J., Forster, L., Nadernezhad, A., Gröll, J., Teßmar, J., & Blunk, T. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020924 · Cited by 58 · cited 1×
“Growth factors like vascular endothelial growth factor (VEGF) for osteogenic and angiogenic tissue formation [73] and transforming growth factor-β (TGF-β ) for cartilaginous tissues [74] can be incorporated.”
Emerging granular hydrogel bioinks to improve biological function in bioprinted constructs
Tuftee, C., Alsberg, E., Ozbolat, I. T., & Rizwan, M. (2023) · Trends in biotechnology · doi:10.1016/j.tibtech.2023.09.007 · Cited by 56 · cited 1×
“Granular hydrogel bioink, as fabricated by Tuftee et al. [97] provided inherent porosity and dynamic crosslinking, which supported nutrient transport and immunomodulation.”
Effect of varying cell densities on the rheological properties of the bioink
Majumder, N., Mishra, A., & Ghosh, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00241 · Cited by 52 · cited 1×
“…the print fidelity and shape retention in extrusion-based bioprinting are governed by the complex balance between yield stress, recovery kinetics, and gelation behavior that determines how effectively printed structures maintain their intended geometry throughout the fabrication process [39,40].”
Wei, Q., An, Y., Zhao, X., Li, M., & Zhang, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131281 · Cited by 49 · cited 1×
“3D bioprinting has emerged as a groundbreaking technology in tissue engineering and regenerative medicine, offering unparalleled potential for fabricating complex, three-dimensional tissue constructs [1–3].”
The Role of Growth Factors in Bioactive Coatings
Bjelić, D., & Finšgar, M. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13071083 · Cited by 48 · cited 1×
“…of bioactive agents, such as growth factors, cytokines, cell adhesion molecules, and signaling peptides, further enhances the biological functionality of the bioinks, promoting tissue-specific responses and facilitating cell differentiation into functional tissue architectures [22–24].”
Current advancements in bio-ink technology for cartilage and bone tissue engineering
Badhe, R. V., Chatterjee, A., Bijukumar, D. R., & Mathew, M. T. (2023) · Bone · doi:10.1016/j.bone.2023.116746 · Cited by 47 · cited 2×
“In addition, several polymers were widely used in bioink fabrication for bone regeneration such as agarose, collagen, alginate, gelatin methacrylate, cellulose nanofibrils, methycellulose, polyvinyl alcohol, hydroxyapatite, hyaluronic acid, silk fibroin, and carboxymethyl chitosan [113].”
Dai, G., & Lee, V. (2015) · Advanced Health Care Technologies · doi:10.2147/ahct.s69191 · Cited by 45 · cited 2×
“3D bioprinting has emerged as a groundbreaking technology in tissue engineering and regenerative medicine, offering unparalleled potential for fabricating complex, three-dimensional tissue constructs [1–3].”
Gupta, D., Derman, İ. D., Xu, C., Huang, Y. H., & Ozbolat, I. T. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-025-00394-y · Cited by 44
Elango, J., Lijnev, A., Zamora‐Ledezma, C., Alexis, F., Wu, W., Marín, J. M. G., & de Val, J. E. M. S. (2022) · Process Biochemistry · doi:10.1016/j.procbio.2022.12.012 · Cited by 42 · cited 3×
“Our recent research claimed that the rheological properties of a bioink play a fundamental role in determining its behavior during the bioprinting process, directly influencing printability, structural integrity, and the overall success of tissue fabrication [14].”
Self-citationStone, R. N., Reeck, J. C., & Oxford, J. T. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24065526 · Cited by 42
Yang, J., Li, Z., Li, S., Zhang, Q., Zhou, X., & He, C. (2023) · Biomaterials Science · doi:10.1039/d2bm01978g · Cited by 40
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies
Salg, G. A., Blaeser, A., Gerhardus, J. S., Hackert, T., & Kenngott, H. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158589 · Cited by 38 · cited 1×
“Salg et al. [110] reviewed pre-, intra-, and post-printing strategies of bioink formulations including bioink composition, bioprinting platforms, and material deposition techniques to enhance vascularization in bioartificial tissues and emphasized bioconvergence approaches, such as computer…”
Dzobo, K., Motaung, S., & Adesida, A. B. (2019) · Preprints.org · doi:10.20944/preprints201908.0222.v1 · Cited by 36
3D printed structured porous hydrogel promotes osteogenic differentiation of BMSCs
Hao, X., Miao, S., Li, Z., Wang, T., BaoBao, X., Chen, J., Xian, C., & Bi, L. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111729 · Cited by 36 · cited 1×
“Hydrogels with high water content and interconnected pores generally exhibit better nutrient and oxygen exchange [57,67].”
Celikkin, N., Mastrogiacomo, S., Dou, W., Heerschap, A., Oosterwijk, E., Walboomers, X. F., & Święszkowski, W. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35067 · Cited by 35 · cited 1×
“Celikkin et al. [112] assessed the biological properties (optimal tissue integration) of 3D printed 5% GelMA in a rat condyle defect model for bone regeneration applications.”
Effect of sterilization techniques on biomaterial inks’ properties and 3D bioprinting parameters
Shyam, R., & Palaniappan, A. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00294 · Cited by 35 · cited 1×
“Previous study recommended that bioinks must undergo sterilization using methods such as UV irradiation, filtration, or autoclaving, depending on the sensitivity of the biomaterials [50].”
Formulation and Characterization of a SIS-Based Photocrosslinkable Bioink
Serna, J. A., Florez, S. L., Talero, V. A., Briceño, J. C., Muñoz-Camargo, C., & Cruz, J. C. (2019) · Polymers · doi:10.3390/polym11030569 · Cited by 34 · cited 1×
“These approaches facilitate the optimization of processing con-Gels ditions to minimize cellular damage while maximizing print fidelity through strategic manipulation of rheological parameters [35,41–43].”
Chen, H., Fei, F., Li, X., Nie, Z., Zhou, D., Liu, L., Zhang, J., Zhang, H., Fei, Z., & Xu, T. (2021) · Regenerative Biomaterials · doi:10.1093/rb/rbab026 · Cited by 32 · cited 2×
“Chen et al. [51] found that shear-thinning bioink, which reduce viscosity under shear stress, help minimize damage during extrusion.”
Handral, H. K., Natu, V. P., Cao, T., Fuh, J. Y. H., Sriram, G., & Lu, W. F. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00169-w · Cited by 32 · cited 2×
“Bioinks must degrade at a rate that allows cells to deposit their own ECM while maintaining structural integrity [49].”
Direct ink writing of particle-based multiphase materials: From rheology to functionality
Smedt, S. D., Attaianese, B., & Cardinaels, R. (2024) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2024.101889 · Cited by 32 · cited 1×
“On the contrary, insufficient viscosity compromises the shape fidelity and structural stability of printed constructs [31].”
Oh, D., Shirzad, M., Kim, M. C., Chung, E., & Nam, S. Y. (2023) · International Journal of Bioprinting · doi:10.36922/ijb.1280 · Cited by 30 · cited 3×
“These approaches facilitate the optimization of processing con-Gels ditions to minimize cellular damage while maximizing print fidelity through strategic manipulation of rheological parameters [35,41–43].”
Carpio, M. B., González‐Martínez, E., Dabaghi, M., Ungureanu, J., Tafoya, A. A., Martinez, D. A. G., Hirota, J. A., & Moran-Mirabal, J. M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10092 · Cited by 30 · cited 1×
“These approaches facilitate the optimization of processing con-Gels ditions to minimize cellular damage while maximizing print fidelity through strategic manipulation of rheological parameters [35,41–43].”
Zheng, L., Li, D., & Wang, L. (2025) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.70125 · Cited by 29 · cited 2×
“The rheological characterization of bioinks requires both fundamental rheometric techniques and application-specific printability assessments to fully evaluate material performance in extrusion-based bioprinting systems [25,32].”
Kumar, P., Sharma, J., Kumar, R., Najser, J., Frantík, J., Manuja, A., Sunnam, N., & Praveenkumar, S. (2025) · Biomaterials Science · doi:10.1039/d4bm01606h · Cited by 28 · cited 1×
“For example, Kumar et al. [114] explored nanocomposite bioink combining gelatin, polycaprolactone, and hydroxyapatite to improve both mechanical strength and osteoinductive potential.”
Development of an alginate–gelatin bioink enhancing osteogenic differentiation by gelatin release
Kim, J., Choi, Y., Gal, C. W., Sung, A., Park, H., & Yun, H. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.660 · Cited by 26
Modified ECM-Based Bioink for 3D Printing of Multi-Scale Vascular Networks
Cohen, R., Baruch, E., Cabilly, I., Shapira, A., & Dvir, T. (2023) · Gels · doi:10.3390/gels9100792 · Cited by 26 · cited 1×
“Other adhesion motifs, such as YIGSR and GFOGER, can also be incorporated to promote cell-specific adhesion [64].”
Kitana, W., Levario‐Diaz, V., Cavalcanti‐Adam, E. A., & Ionov, L. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202303343 · Cited by 26 · cited 2×
“This temporal aspect of rheological behavior is particularly valuable for controlling material properties throughout the printing process and subsequent maturation phases [14,28,29].”
Recent trends in embedded 3D bioprinting of vascularized tissue constructs
Cho, W.-W., Park, W., & Cho, D. (2025) · Biofabrication · doi:10.1088/1758-5090/adafdd · Cited by 25
3D Bioprinting: a review of materials, processes and bioink properties
FONTES, A. B. D. S., & Marcomini, R. F. (2020) · The Journal of Engineering and Exact Sciences · doi:10.18540/jcecvl6iss5pp0617-0639 · Cited by 24 · cited 1×
“Additionally, the bioinks must possess gelation kinetics that enables rapid solidification or crosslinking upon printing, stabilizing the printed construct and preventing deformation or collapse before tissue maturation [16,17].”
Akhtar, Z. B. (2024) · Journal of Electronics Electromedical Engineering and Medical Informatics · doi:10.35882/jeeemi.v6i1.351 · Cited by 22 · cited 1×
“The significance of bioink development extends beyond regenerative medicine, encompassing diverse applications such as drug screening, disease modeling, personalized tissue implants, and organ replacement [8–10].”
Xu, Y., Jia, L., Wang, Z., Jiang, G., Zhou, G., Chen, W., & Chen, R. (2020) · Materials Letters · doi:10.1016/j.matlet.2020.127609 · Cited by 21 · cited 1×
“Similarly, Xu et al. [118] investigated the effect of injectable photo-crosslinking cartilage decellularized extracellular matrix through 8 weeks of subcutaneous implantation in nude mice for cartilage tissue regeneration.”
Qavi, I., Halder, S., & Tan, G. Z. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00828-1 · Cited by 20 · cited 1×
“In most recent times, the combination of artificial intelligence (AI) and machine learning (ML) is transforming the development of bioinks [102,103].”
Rheology of high internal phase ratio emulsions and foams
Pal, R. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103426 · Cited by 18
Bridging the gap: how patient-derived lung cancer organoids are transforming personalized medicine
Liu, C., Shi, C., Wang, S., Qi, R., Gu, W., Yu, F., Zhang, G., & Qiu, F. X. (2025) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2025.1554268 · Cited by 18 · cited 1×
“Furthermore, patient-specific tissue constructs hold great promise for precision medicine, enabling tailored treatments based on an individual’s biological profile [11–13].”
Application of tissue-derived bioink for articular cartilage lesion repair
Wu, J., Han, Y., Fu, Q., Hong, Y., Li, L., Cao, J., Li, H., Liu, Y., Chen, Y., Zhu, J., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138292 · Cited by 17 · cited 1×
“Wu et al. [117] fabricated cell-laden bioink containing dCECM, infrapatellar fat pad adipose-derived stem cells (IPFP-ADSC), gelMA and sodium alginate for chondrogenesis and found that bioink facilitated chondrogenic differentiation by providing a favorable cell matrix for stem cell proliferation…”
Effect of viscosity of gelatin methacryloyl-based bioinks on bone cells
Rashad, A., Gomez, A., Gangrade, A., Zehtabi, F., Mandal, K., Maity, S., Ma, C., Li, B., Khademhosseini, A., & de Barros, N. R. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d91 · Cited by 16 · cited 1×
“…through their impact on elastic recovery and die swell effects, where materials with pronounced elastic character may exhibit dimensional instability immediately post-extrusion, requiring a careful balance of storage and loss moduli to achieve optimal flow and retention characteristics [36–38].”
Nosenko, M. A., Moysenovich, A. M., Arkhipova, A. Y., Atretkhany, K. N., Nedospasov, S. A., Drutskaya, M. S., & Moisenovich, M. M. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.016 · Cited by 15 · cited 1×
“…of bioactive agents, such as growth factors, cytokines, cell adhesion molecules, and signaling peptides, further enhances the biological functionality of the bioinks, promoting tissue-specific responses and facilitating cell differentiation into functional tissue architectures [22–24].”
Extrusion-based bioprinting: considerations toward gelatin-alginate bioink
Abedi, K., Keshvari, H., & Solati‐Hashjin, M. (2024) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2023-0207 · Cited by 15 · cited 1×
“…through their impact on elastic recovery and die swell effects, where materials with pronounced elastic character may exhibit dimensional instability immediately post-extrusion, requiring a careful balance of storage and loss moduli to achieve optimal flow and retention characteristics [36–38].”
Chirianni, F., Vairo, G., & Marino, M. (2024) · Meccanica · doi:10.1007/s11012-024-01862-7 · Cited by 15
Tong, X., Ayushman, M., Lee, H. P., & Yang, F. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123112 · Cited by 14 · cited 1×
“Recently, Tong et al. [107] demonstrated that thermal and ionic modulation techniques effectively fine-tuned the viscoelastic properties of bioinks, enhancing extrusion consistency while promoting chondrogenic activity.”
Machour, M., Meretzki, R., Moshe-Haizler, Y., Shuhmaher, M., Safina, D., Levy, M. M., & Levenberg, S. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123406 · Cited by 14
Drug‐releasing Microspheres for Stem Cell Differentiation
Sharma, R., Benwood, C., & Willerth, S. M. (2021) · Current Protocols · doi:10.1002/cpz1.331 · Cited by 12 · cited 1×
“Controlled release of these factors can be achieved through various methods, such as encapsulation within microparticles or covalent attachment to the bioinks matrix [71,72].”
An Anti-Oxidative Bioink for Cartilage Tissue Engineering Applications
Chen, X., Yang, M., Zhou, Z. Y., Sun, J., Meng, X., Huang, Y., Zhu, W., Zhu, S., He, N., Zhu, X., et al. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15020037 · Cited by 12 · cited 1×
“Additionally, mechanical properties, including elasticity and stiffness, should closely mimic those of the target tissue, providing support to the printed structure during maturation and fostering cellular interactions [83–86].”
Zamora‐Ledezma, C., Narváez‐Muñoz, C., Almeida-Arellano, F. A., Voiry, D., Salameh, C., Medina, E. A., Carrión, L., Navas-León, D. G., Vizuete, K. S., Debut, A., et al. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104796 · Cited by 10 · cited 1×
“The relative magnitudes of these moduli determine whether a material behaves predominantly as an elastic solid (G ′ > G ′′ ) or viscous liquid (G ′′ > G ′ ) [30,33].”
Self-citationKafili, G., Tamjid, E., Niknejad, H., & Simchi, A. (2024) · Journal of Materials Science Materials in Engineering · doi:10.1186/s40712-024-00153-z · Cited by 9 · cited 1×
“…that the relationship between viscosity, print speed, and applied pressure influences print fidelity in alginate hydrogels, while Kafili et al. [90] demonstrated that higher levels of decellularized amniotic membrane (dAM) enhanced mechanical strength but diminished cell proliferation-again…”
Compendium of 3D Bioprinting Technology
Mohanan, P. V. (2024) · CRC Press eBooks · doi:10.1201/9781003505198 · Cited by 5
Jeon, O., Park, H., Lee, M. S., & Alsberg, E. (2025) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2025.03.17.643708 · Cited by 4 · cited 1×
“…between bioink microporosity, low extrusion stress, and high cellular density and concluded that these pre-vascularized constructs exhibited mechanical stability and long-term osteogenic differentiation in mouse calvarial bone defect models, demonstrating successful vascular integration [111].”
Chaubey, A., Sharma, S., Chauhan, L., & Tyagi, A. (2024) · International Journal of Pharmaceutical Research and Development · doi:10.33545/26646862.2024.v6.i2b.68 · Cited by 3 · cited 2×
“Additionally, optimizing printing speed, nozzle diameter, and extrusion pressure can significantly improve cell survival rates [52].”
Design and modeling of an oxygen-releasing hydrogel for myocardial infarction treatment.
Mangiatordi, M. (2020) · Cited by 1
Development of collagen-based bioinks for cartilage tissue engineering applications
O’Donnell, S., & Levingstone, T. J. (2024) · AIP conference proceedings · doi:10.1063/5.0214990 · Cited by 1 · cited 1×
“O’Donnell et al. [108] optimized the printing parameters of hyaluronic acid-sodium alginate-collagen-chondroitin sulfate bioink for cartilage regeneration and disclosed that optimal printing 22G nozzle, highlighting how thermal and ionic modulation techniques can fine-tune viscoelastic properties…”
Machour, M., Meretzki, R., Moshe-Haizler, Y., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.5020260 · Cited by 1
Tissue Engineering and Regenerative Medicine
Kamble, S. D., Singh, S., Kumar, A., & Dwivedi, G. (2025) · CRC Press eBooks · doi:10.1201/9781003536352 · Cited by 1
Research works printed but not linked: 1
- (2025, April 25). GlobeNewswire FluidForm Bio Announces Advance in Bioprinted Tissue Therapies with Landmark Publication in Science Advances. Available online: https://www.biospace.com/press-releases/fluidform-bio-announces-advance-in-bioprinted-tissue-therapies-with-landmark-publication-in-science-advances.
Cited by
Next generation bioprinting with artificial intelligence in the healthcare industry
Dhiman, B., Bammidi, R., Kumar, M., Rangappa, S. M., & Siengchin, S. (2026) · Next Bioengineering · doi:10.1016/j.nxbio.2026.100015 · Cited by 27
Bioprinted Scaffolds for Biomimetic Applications: A State-of-the-Art Technology
Gebeshuber, I. C., Khawas, S., Sharma, R., & Sharma, N. (2025) · Biomimetics · doi:10.3390/biomimetics10090595 · Cited by 26
“Together, these approaches demonstrate that careful tuning of the material composition, crosslinking, and rheology is essential to fabricate scaffolds that are mechanically robust while supporting cell proliferation, differentiation, and tissue development [50].”
InfluentialPrakash, A., Malviya, R., Sridhar, S. B., Wadhwa, T., Shareef, J., & Tripathy, D. B. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101255 · Cited by 23
Quantitative Assessment of Hydrogel Printability in Extrusion Bioprinting
Yu, S., Luo, Y., Chen, S., Fan, J., & Zhang, H. (2026) · Gels · doi:10.3390/gels12030189 · Cited by 18
“The successful implementation of extrusion-based bioprinting relies on the synergistic optimization of multiple parameters, necessitating the establishment of a comprehensive evaluation framework that integrates rheological properties, structural fidelity, and biological performance [79,84,85].”
Cutting-Edge Smart Hydrogel Platforms for Improved Wound Healing
Sharma, A., Puri, V., Dheer, D., Kaur, M., Huanbutta, K., & Sangnim, T. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18040406 · Cited by 9
Metadata
- Authors
- Elango, J., & Zamora-Ledezma, C.
- Affiliations
- Universidad Católica de Murcia (ES)
- Bioengineering & Regenerative Medicine Research Group (Bio-ReM), Escuela de Ingeniería, Arquitectura y Diseño (EIAD), Universidad Alfonso X el Sabio (UAX), Avenida de la Universidad 1, Villanueva de la Cañada, 28691 Madrid, Spain
- Corresponding author
- Elango, Jeevithan
- Venue
- Gels
- Publisher
- MDPI AG
- Published
- 2025-08-19
- Volume
- 11
- Issue
- 8
- Pages
- 659
- ISSN
- 2310-2861 (ISSN-L)
- PMC
- PMC12385449
- OpenAlex
- W4413309813
- Cited by
- 75
- References
- 121
- Citations by year
- 2026: 71 · 2025: 4
- FWCI
- 6.01
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Gels (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Era-Min Cofund 2023 (MCIU/AEI/10.13039/501,100,011,033/UE)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- 3D bioprinting, rheology, printability, cell viability, cell proliferation, tissue maturation, vascularization, shape fidelity, structural integrity, regenerative medicine
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.