The DOI matches its Crossref record; 132 of the 132 references it cites were found in a registry or an index.
Recent Advancements in Materials and Coatings for Biomedical Implants
Open accessAbstract
Metallic materials such as stainless steel (SS), titanium (Ti), magnesium (Mg) alloys, and cobalt-chromium (Co-Cr) alloys are widely used as biomaterials for implant applications. Metallic implants sometimes fail in surgeries due to inadequate biocompatibility, faster degradation rate (Mg-based alloys), inflammatory response, infections, inertness (SS, Ti, and Co-Cr alloys), lower corrosion resistance, elastic modulus mismatch, excessive wear, and shielding stress. Therefore, to address this problem, it is necessary to develop a method to improve the biofunctionalization of metallic implant surfaces by changing the materials’ surface and morphology without altering the mechanical properties of metallic implants. Among various methods, surface modification on metallic surfaces by applying coatings is an effective way to improve implant material performance. In this review, we discuss the recent developments in ceramics, polymers, and metallic materials used for implant applications. Their biocompatibility is also discussed. The recent trends in coatings for biomedical implants, applications, and their future directions were also discussed in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Toxicity, mechanism and health effects of some heavy metals
Jaishankar, M., Tseten, T., Anbalagan, N., Mathew, B. B., & Beeregowda, K. N. (2014) · Interdisciplinary Toxicology · doi:10.2478/intox-2014-0009 · Cited by 6,402
Heavy Metal Pollution in the Environment and Their Toxicological Effects on Humans
Briffa, J., Sinagra, E., & Blundell, R. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e04691 · Cited by 4,402
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Nickel: Human Health and Environmental Toxicology
Genchi, G., Carocci, A., Lauria, G., Sinicropi, M. S., & Catalano, A. (2020) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph17030679 · Cited by 1,602
Bioactive calcium phosphate materials and applications in bone regeneration
Jeong, J., Kim, J. H., Shim, J. H., Hwang, N. S., & Heo, C. Y. (2019) · Biomaterials Research · doi:10.1186/s40824-018-0149-3 · Cited by 1,054
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Corrosion of Metallic Biomaterials: A Review
Eliaz, N. (2019) · Materials · doi:10.3390/ma12030407 · Cited by 984
Biomedical applications of titanium and its alloys
Elias, C. N., Lima, J. H. C., Valiev, R., & Meyers, M. A. (2008) · JOM · doi:10.1007/s11837-008-0031-1 · Cited by 983
Chitosan: A Natural Biopolymer with a Wide and Varied Range of Applications
Jiménez-Gómez, C. P., & Cecilia, J. A. (2020) · Molecules · doi:10.3390/molecules25173981 · Cited by 817
Alloying design of biodegradable zinc as promising bone implants for load-bearing applications
Yang, H., Jia, B., Zhang, Z., Qu, X., Li, G., Lin, W., Zhu, D., Dai, K., & Zheng, Y. (2020) · Nature Communications · doi:10.1038/s41467-019-14153-7 · Cited by 756
Supramolecular Adhesive Hydrogels for Tissue Engineering Applications
Zhao, Y., Song, S., Ren, X., Zhang, J., Lin, Q., & Zhao, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00815 · Cited by 711
Review of magnesium-based biomaterials and their applications
Sezer, N., Evis, Z., Kayhan, S. M., Tahmasebifar, A., & Koç, M. (2018) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.02.003 · Cited by 704
The role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Metallic Biomaterials: Current Challenges and Opportunities
Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., Cao, A., et al. (2017) · Materials · doi:10.3390/ma10080884 · Cited by 662
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Sarraf, M., Ghomi, E. R., Alipour, S., Ramakrishna, S., & Sukiman, N. L. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00170-3 · Cited by 538
Biomedical applications of diamond‐like carbon coatings: A review
Roy, R. K., & Lee, K. (2007) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30768 · Cited by 496
Biodegradable Materials and Metallic Implants—A Review
Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., & Berzina-Cimdina, L. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8040044 · Cited by 493
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Problem of Stress Shielding and Improvement to the Hip Implant Designs: A Review
Ridzwan, M. I. Z., Shuib, S., Hassan, A. Y., Shokri, A. A., & Ibrahim, M. N. M. (2007) · Journal of Medical Sciences(Faisalabad) · doi:10.3923/jms.2007.460.467 · Cited by 358
Aortic Bioprosthetic Valve Durability
Rodriguez-Gabella, T., Voisine, P., Puri, R., Pibarot, P., & Rodés-Cabau, J. (2017) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2017.07.715 · Cited by 351
Joyce, K., Fabra, G. T., Bozkurt, Y., & Pandit, A. (2021) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-021-00512-8 · Cited by 316
Mechanical Strength and Biocompatibility of Ultrafine-Grained Commercial Purity Titanium
Estrin, Y., Kim, H.-E., Lapovok, R., Ng, H. P., & Jo, J.-H. (2013) · BioMed Research International · doi:10.1155/2013/914764 · Cited by 313
Hydroxyapatite for Biomedical Applications: A Short Overview
Fiume, E., Magnaterra, G., Rahdar, A., Verné, E., & Baino, F. (2021) · Ceramics · doi:10.3390/ceramics4040039 · Cited by 313
Passivation of metal alloys using sol–gel-derived materials — a review
Metroke, T. L., Parkhill, R. L., & Knobbe, E. T. (2001) · Progress in Organic Coatings · doi:10.1016/s0300-9440(01)00134-5 · Cited by 285
Quinn, J., McFadden, R., Chan, C.-W., & Carson, L. (2020) · iScience · doi:10.1016/j.isci.2020.101745 · Cited by 285
Functionalized ceramics for biomedical, biotechnological and environmental applications
Treccani, L., Yvonne Klein, T., Meder, F., Pardun, K., & Rezwan, K. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.036 · Cited by 284
Bekmurzayeva, A., Duncanson, W. J., Azevedo, H. S., & Kanayeva, D. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.08.049 · Cited by 284
Prasadh, S., & Wong, R. C. W. (2018) · Oral Science International · doi:10.1016/s1348-8643(18)30005-3 · Cited by 283
Biodegradable metallic bone implants
Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., & Gao, C. (2019) · Materials Chemistry Frontiers · doi:10.1039/c8qm00507a · Cited by 275
Hydrogel as a Biomaterial for Bone Tissue Engineering: A Review
Yue, S., He, H., Li, B., & Hou, T. (2020) · Nanomaterials · doi:10.3390/nano10081511 · Cited by 274
Biodegradable magnesium‐based biomaterials: An overview of challenges and opportunities
Amukarimi, S., & Mozafari, M. (2021) · MedComm · doi:10.1002/mco2.59 · Cited by 258
Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review
Liu, C., Ren, Z., Xu, Y., Pang, S., Zhao, X., & Zhao, Y. (2018) · Scanning · doi:10.1155/2018/9216314 · Cited by 246
Recent Trends in the Development of Bone Regenerative Biomaterials
Tang, G., Liu, Z., Liu, Y., Yu, J., Wang, X., Tan, Z., & Ye, X. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.665813 · Cited by 242
Metals for Biomedical Applications
Hermawan, H., Ramdan, D., & P. Djuansjah, J. R. (2011) · Biomedical Engineering - From Theory to Applications · doi:10.5772/19033 · Cited by 238
Singh, N., Hameed, P., Ummethala, R., Manivasagam, G., Prashanth, K. G., & Eckert, J. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2020.100097 · Cited by 229
Potential Causes of Titanium Particle and Ion Release in Implant Dentistry: A Systematic Review
Delgado-Ruiz, R., & Romanos, G. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19113585 · Cited by 224
Biological properties of calcium phosphate biomaterials for bone repair: a review
Lu, J., Yu, H., & Chen, C. (2018) · RSC Advances · doi:10.1039/c7ra11278e · Cited by 214
Surface Modification of Polymer Substrates for Biomedical Applications
Neděla, O., Slepička, P., & Švorčík, V. (2017) · Materials · doi:10.3390/ma10101115 · Cited by 213
Ofudje, E. A., Adeogun, A. I., Idowu, M. A., & Kareem, S. O. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01716 · Cited by 213
Metal/metal oxide nanocomposites for bactericidal effect: A review
Pachaiappan, R., Rajendran, S., Show, P. L., Manavalan, K., & Naushad, M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2020.128607 · Cited by 207
Biomaterial applications in cardiovascular tissue repair and regeneration
Lam, M. T., & Wu, J. C. (2012) · Expert Review of Cardiovascular Therapy · doi:10.1586/erc.12.99 · Cited by 203
Biomaterials and bioengineering tomorrow’s healthcare
Bhat, S., & Kumar, A. (2013) · Biomatter · doi:10.4161/biom.24717 · Cited by 186
Metals for bone implants: safety, design, and efficacy
Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Haberland, C., Huff, S., Miller, M., Elahinia, M., & Dean, D. (2016) · Biomanufacturing Reviews · doi:10.1007/s40898-016-0001-2 · Cited by 184
A Review of Bioactive Glass/Natural Polymer Composites: State of the Art
Sergi, R., Bellucci, D., & Cannillo, V. (2020) · Materials · doi:10.3390/ma13235560 · Cited by 181
Cadosch, D., Chan, E., Gautschi, O. P., & Filgueira, L. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32625 · Cited by 180
Liu, W., Liu, S., & Wang, L. (2019) · Coatings · doi:10.3390/coatings9040249 · Cited by 177
Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing
Łyczkowska, E., Szymczyk‐Ziółkowska, P., Dybała, B., & Chlebus, E. (2014) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2014.03.001 · Cited by 176
Wear Debris Characterization and Corresponding Biological Response: Artificial Hip and Knee Joints
Nine, M. J., Choudhury, D., Hee, A. C., Mootanah, R., & Osman, N. A. A. (2014) · Materials · doi:10.3390/ma7020980 · Cited by 172
Polyetheretherketone and Its Composites for Bone Replacement and Regeneration
Liao, C., Li, Y., & Tjong, S. C. (2020) · Polymers · doi:10.3390/polym12122858 · Cited by 170
Kazimierczak, P., & Przekora, A. (2020) · Coatings · doi:10.3390/coatings10100971 · Cited by 159
Functional Coatings or Films for Hard-Tissue Applications
Wang, G., & Zreiqat, H. (2010) · Materials · doi:10.3390/ma3073994 · Cited by 155
Preparation Methods for Improving PEEK’s Bioactivity for Orthopedic and Dental Application: A Review
Almasi, D., Iqbal, N., Sadeghi, M., Izman, S., Kadir, M. R. A., & Kamarul, T. (2016) · International Journal of Biomaterials · doi:10.1155/2016/8202653 · Cited by 144
Chitosan as an Underrated Polymer in Modern Tissue Engineering
Kołodziejska, M., Jankowska, K., Klak, M., & Wszola, M. (2021) · Nanomaterials · doi:10.3390/nano11113019 · Cited by 139
Advancement of Biomaterial-Based Postoperative Adhesion Barriers
Chandel, A. K. S., Shimizu, A., Hasegawa, K., & Ito, T. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202000395 · Cited by 138 · cited 1×
“By applying the appropriate modification on the surface of the material, one can tailor and improve the biocompatibility, cell interactions, and adhesion [14].”
MethodRaghavendra, G. M., Varaprasad, K., & Jayaramudu, T. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-32889-0.00002-9 · Cited by 138
Research and development of metals for medical devices based on clinical needs
Hanawa, T. (2012) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/13/6/064102 · Cited by 135
Cao, Y., Zi, T., Zhao, X.-R., Liu, C., Ren, Q., Fang, J., Li, W., & Li, A. (2020) · Scientific Reports · doi:10.1038/s41598-020-70352-z · Cited by 132
Accioni, F., Vázquez, J., Merinero, M., Begines, B., & Alcudia, A. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020455 · Cited by 127
Cerium-doped hydroxyapatite/collagen coatings on titanium for bone implants
Ciobanu, G., & Harja, M. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.07.290 · Cited by 126
Plecko, M., Sievert, C., Andermatt, D., Frigg, R., Kronen, P., Klein, K., Stübinger, S., Nuss, K. M. R., Bürki, A., Ferguson, S. J., et al. (2012) · BMC Musculoskeletal Disorders · doi:10.1186/1471-2474-13-32 · Cited by 124
Potential bioactive coating system for high-performance absorbable magnesium bone implants
Sarian, M. N., Iqbal, N., Sotoudehbagha, P., Razavi, M., Ahmed, Q. U., Sukotjo, C., & Hermawan, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.10.034 · Cited by 121
Lam, M., Migonney, V., & Falentin‐Daudre, C. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.020 · Cited by 120
Noyama, Y., Miura, T., Ishimoto, T., Itaya, T., Niinomi, M., & Nakano, T. (2012) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.m2011358 · Cited by 114
Mishra, V. K., Bhattacharjee, B. N., Parkash, O., Kumar, D., & Rai, S. B. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.082 · Cited by 101
Current and future biocompatibility aspects of biomaterials for hip prosthesis
Aherwar, A., Singh, A. K., & Patnaik, A. (2015) · AIMS bioengineering · doi:10.3934/bioeng.2016.1.23 · Cited by 101
Rehman, M. A. U., Baştan, F. E., Haider, B., & Boccaccini, A. R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.045 · Cited by 101
Chandel, A. K. S., Kumar, C. U., & Jewrajka, S. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10675 · Cited by 98
Kiran, A. S., Kumar, T. S. S., Sanghavi, R., Doble, M., & Ramakrishna, S. (2018) · Nanomaterials · doi:10.3390/nano8100860 · Cited by 98
Antibacterial effects of silver-doped hydroxyapatite thin films sputter deposited on titanium
Trujillo, N. A., Oldinski, R. A., Ma, H., Bryers, J. D., Williams, J. D., & Popat, K. C. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.05.012 · Cited by 96
Chandel, A. K. S., Nutan, B., Raval, I., & Jewrajka, S. K. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00015 · Cited by 95
3D printing of cell-laden visible light curable glycol chitosan bioink for bone tissue engineering
Chang, H. K., Yang, D. H., Ha, M. Y., Kim, H. J., Kim, C. H., Kim, S. H., Choi, J. W., & Chun, H. J. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119328 · Cited by 81
Ahirwar, H., Zhou, Y., Mahapatra, C., Ramakrishna, S., Kumar, P., & Nanda, H. S. (2020) · Coatings · doi:10.3390/coatings10030264 · Cited by 80
Niu, Q. L., Zheng, X., Ming, W., & Chen, M. (2012) · Tribology Transactions · doi:10.1080/10402004.2012.729296 · Cited by 79
Tallet, L., Gribova, V., Ploux, L., Vrana, N. E., & Lavall�e, P. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001199 · Cited by 79
Kaliaraj, G. S., Siva, T., & Ramadoss, A. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01301g · Cited by 79
Islam, M., Lantada, A. D., Mager, D., & Korvink, J. G. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101834 · Cited by 75
Toughening of Bioceramic Composites for Bone Regeneration
Abbas, Z., Dapporto, M., Tampieri, A., & Sprio, S. (2021) · Journal of Composites Science · doi:10.3390/jcs5100259 · Cited by 71
Hatem, A., Lin, J., Wei, R., Torres, R. D., Laurindo, C. A. H., & Junior, P. C. S. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.07.004 · Cited by 70
Diamond-like carbon thin films prepared by pulsed-DC PE-CVD for biomedical applications
Derakhshandeh, M. R., Eshraghi, M. J., Hadavi, M., Javaheri, M., Khamseh, S., Sari, M. G., Zarrintaj, P., Saeb, M. R., & Mozafari, M. (2018) · Surface Innovations · doi:10.1680/jsuin.17.00069 · Cited by 66
Ionescu, R. N., Totan, A., Imre, M. M., Țâncu, A. M. C., Pantea, M., Butucescu, M., & Farcașiu, A.-T. (2022) · Materials · doi:10.3390/ma15031016 · Cited by 65
Biomedical Alloys and Physical Surface Modifications: A Mini-Review
Yan, X., Cao, W., & Li, H. (2021) · Materials · doi:10.3390/ma15010066 · Cited by 62
Wang, Q., Li, P., Tang, P., Ge, X., Ren, F., Zhao, C., Fang, J., Wang, K., Fang, L., Li, Y., et al. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.110359 · Cited by 59
Zhang, B., Li, B., Gao, S., Li, Y., Cao, R., Cheng, J., Li, R., Wang, E., Guo, Y., Zhang, K., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108758 · Cited by 57
Çevik, P., Schimmel, M., & Yılmaz, B. (2022) · BioMed Research International · doi:10.1155/2022/3074182 · Cited by 57
Wilson, J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102205-4.00001-5 · Cited by 56
Zinc Doped Hydroxyapatite Thin Films Prepared by Sol–Gel Spin Coating Procedure
Predoi, D., Iconaru, S. L., Predoi, M. V., Buton, N., & Motelica‐Heino, M. (2019) · Coatings · doi:10.3390/coatings9030156 · Cited by 55
Bociąga, D., Sobczyk‐Guzenda, A., Komorowski, P., Balcerzak, J., Jastrzębski, K., Rosińska, K., & Kaczmarek, A. (2019) · Nanomaterials · doi:10.3390/nano9060812 · Cited by 54
Bociąga, D., Sobczyk‐Guzenda, A., Szymański, W., Jędrzejczak, A., Jastrzębska, A., Kaczmarek, A., Świątek, L., & Jastrzębski, K. (2017) · Vacuum · doi:10.1016/j.vacuum.2017.06.027 · Cited by 51
Xian, P., Chen, Y., Gao, S., Qian, J., Zhang, W., Udduttula, A., Huang, N., & Wan, G. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126282 · Cited by 51
Material Design and Surface Engineering for Bio-implants
Ralls, A. M., Kumar, P., Misra, M., & Menezes, P. L. (2019) · JOM · doi:10.1007/s11837-019-03687-2 · Cited by 50
Corrosion Behavior and Biocompatibility of Diamond-like Carbon-Coated Zinc: An In Vitro Study
Peng, F., Lin, Y., Zhang, D., Ruan, Q., Tang, K., Li, M., Liu, X., Chu, P. K.-H., & Zhang, Y. (2021) · ACS Omega · doi:10.1021/acsomega.1c00531 · Cited by 50
Wachesk, C. C., Seabra, S. H., dos Santos, T. A. T., Trava-Airoldi, V. J., Lobo, A. O., & Marciano, F. R. (2021) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-021-06596-6 · Cited by 50
Ohta, S., Mitsuhashi, K., Chandel, A. K. S., Qi, P., Nakamura, N., Nakamichi, A., Yoshida, H., Yamaguchi, G., Hara, Y., Sasaki, R., et al. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119289 · Cited by 50
Antibacterial Effect of Au Implantation in Ductile Nanocomposite Multilayer (TiAlSiY)N/CrN Coatings
Pogrebnjak, A. D., Kong, C., Webster, R. F., Tilley, R. D., Takeda, Y., Oyoshi, K., Bondar, O. V., Buranich, V. V., Konstantinov, S. V., Baimoldanova, L. S., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16328 · Cited by 49
Hamza, R. Z., Gobouri, A. A., Al-Yasi, H. M., Al-Talhi, T., & El‐Megharbel, S. M. (2021) · Coatings · doi:10.3390/coatings11060680 · Cited by 47
Berni, M., Lopomo, N. F., Marchiori, G., Gambardella, A., Boi, M., Bianchi, M., Visani, A., Pavan, P. G., Russo, A., & Marcacci, M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.02.014 · Cited by 46
Corrosion of magnesium and magnesium–calcium alloy in biologically-simulated environment
Harrison, R. P., Maradze, D., Lyons, S., Zheng, Y., & Liu, Y. (2014) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2014.08.010 · Cited by 45
Sankar, M., Suwas, S., Subramanian, B., & Manivasagam, G. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.10.077 · Cited by 45
Pană, I., Braic, V., Dinu, M., Mouele, E. S. M., Pârău, A. C., Petrik, L. F., & Braic, M. T. (2020) · Coatings · doi:10.3390/coatings10080710 · Cited by 45
Durgalakshmi, D., Kaliaraj, G. S., Jagannathan, M., Rakkesh, R. A., Aruna, P., Ganesan, S., & Balakumar, S. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112459 · Cited by 45
Materials used for hip and knee implants
Kaivosoja, E., Tiainen, V., Takakubo, Y., Rajchel, B., Sobiecki, J. R., Konttinen, Y. T., & Takagi, M. (2012) · Elsevier eBooks · doi:10.1533/9780857096128.1.178 · Cited by 43
Cu and Si co-doped microporous TiO2 coating for osseointegration by the coordinated stimulus action
He, X., Zhang, G., Zhang, H., Hang, R., Huang, X., Yao, X., & Zhang, X. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144072 · Cited by 43
Nanostructured diamond coatings for orthopaedic applications
Catledge, S. A., Thomas, V., & Vohra, Y. K. (2013) · Elsevier eBooks · doi:10.1533/9780857093516.2.105 · Cited by 41
Li, K., Liu, S., Yang, X., Zhang, L., & Han, Y. N. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01096c · Cited by 40
Chai, M., An, M., & Zhang, X. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112416 · Cited by 40
Nanosystems for drug delivery of coenzyme Q10
Paroha, S., Chandel, A. K. S., & Dubey, R. D. (2017) · Environmental Chemistry Letters · doi:10.1007/s10311-017-0664-9 · Cited by 37
Biomineralization of osteoblasts on DLC coated surfaces for bone implants
Subramanian, B., Rajan, S. T., Martin, P., Vaithilingam, V., Bean, P. A., Evans, M. D. M., & Bendavid, A. (2018) · Biointerphases · doi:10.1116/1.5007805 · Cited by 37
Shafiee, B. M., Torkaman, R., Mahmoudi, M., Emadi, R., Derakhshan, M., Karamian, E., & Tavangarian, F. (2020) · Coatings · doi:10.3390/coatings10121220 · Cited by 37
Mo, S., Zhao, F., Gao, A., Wu, Y., Liao, Q., Xie, L., Pan, H., Tong, L., Chu, P. K.-H., & Wang, H. (2021) · Smart Materials in Medicine · doi:10.1016/j.smaim.2021.07.004 · Cited by 36
Endosseous Dental Implant Materials and Clinical Outcomes of Different Alloys: A Systematic Review
Fiorillo, L., Cicciù, M., Tözüm, T. F., Saccucci, M., Orlando, C., Romano, G. L., D’Amico, C., & Cervino, G. (2022) · Materials · doi:10.3390/ma15051979 · Cited by 35
Nutan, B., Chandel, A. K. S., & Jewrajka, S. K. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00461 · Cited by 34
Silver-Doped Hydroxyapatite Thin Layers Obtained by Sol-Gel Spin Coating Procedure
Prodan, A. M., Iconaru, S. L., Predoi, M. V., Predoi, D., Motelica‐Heino, M., Turculeţ, C. Ş., & Beuran, M. (2019) · Coatings · doi:10.3390/coatings10010014 · Cited by 33
Synthesis of Chemically Cross-Linked pH-Sensitive Hydrogels for the Sustained Delivery of Ezetimibe
Khan, R., Zaman, M., Salawi, A., Khan, M. A., Iqbal, M. O., Riaz, R., Ahmed, M. M., Butt, M. H., Alvi, M. N., Almoshari, Y., et al. (2022) · Gels · doi:10.3390/gels8050281 · Cited by 30
Estrada-Cabrera, E., Torres-Ferrer, L. R., Aztatzi-Aguilar, O. G., Vizcaya‐Ruíz, A. D., Meraz‐Ríos, M. A., Zárate-Triviño, D. G., Arizmendi-Morquecho, A. M., Bugallo, A. D. L., Prokhorov, E., & Luna‐Bárcenas, G. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.07.002 · Cited by 29
Poly(N-Isopropylacrylamide) Based Electrically Conductive Hydrogels and Their Applications
Deng, Z., Guo, Y., Zhao, X., Du, T., Zhu, J., Xie, Y., Wu, F., Wang, Y., & Guan, M. (2022) · Gels · doi:10.3390/gels8050280 · Cited by 29
Su, S., Chen, W., Zheng, M., Lu, G., Tang, W. D., Huang, H., & Qu, D. (2022) · ACS Omega · doi:10.1021/acsomega.1c05908 · Cited by 26
Romischke, J., Scherkus, A., Saemann, M., Krueger, S., Bader, R., Kragl, U., & Meyer, J. (2022) · Gels · doi:10.3390/gels8050296 · Cited by 20
The Use of Ceramics as Bone Substitutes in Revision Hip Arthroplasty
Whitehouse, M. R., & Blom, A. W. (2009) · Materials · doi:10.3390/ma2041895 · Cited by 19
Progress in Bioactive Metal and, Ceramic Implants for Load- Bearing Application
Elbadawi, M., Meredith, J. O., Hopkins, L., & Reaney, I. M. (2016) · InTech eBooks · doi:10.5772/62598 · Cited by 19
Exploring the Extracellular Matrix to Create Biomaterials
Vigier, S., & Fülöp, T. (2016) · InTech eBooks · doi:10.5772/62979 · Cited by 18
Blood Compatibility of ZrO2 Particle Reinforced PEEK Coatings on Ti6Al4V Substrates
Song, J., Liao, Z., Shi, H., Xiang, D., Xu, L., Liu, Y., Mu, X., & Liu, W. (2017) · Polymers · doi:10.3390/polym9110589 · Cited by 18
Effect of copper-doped titanium nitride coating on angiogenesis
Liu, H., Zhang, X., Jin, S., Zhao, Y., Ren, L., & Yang, K. (2020) · Materials Letters · doi:10.1016/j.matlet.2020.127634 · Cited by 18
Dinu, M., Pană, I., Scripca, P., et al. (2020) · Coatings · doi:10.3390/coatings10050495 · Cited by 18
Ashok Raja, C., Balakumar, S., Anandkumar, B., George, R. P., & Mudali, U. K. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101666 · Cited by 17
Hosseini, S., & Farnoush, H. (2018) · Materials Research Express · doi:10.1088/2053-1591/aaedfe · Cited by 16
Reduced graphene oxide/nano-Bioglass composites: processing and super-anion oxide evaluation
raja, C. A., Balakumar, S., Durgalakshmi, D., George, R. P., Anandkumar, B., & Mudali, U. K. (2016) · RSC Advances · doi:10.1039/c5ra27160f · Cited by 13
7.11 Trends in Materials for Spine Surgery
Marcolongo, M. S., Sarkar, S., & Ganesh, N. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100691-7.00269-x · Cited by 13
Wang, S., Han, Z. H., Nie, Y., et al. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab27ee · Cited by 8
Nanotechnology Delivery Systems of Coenzyme Q10: Pharmacokinetic and Clinical Implications
Paroha, S., Chandel, A. K. S., & Dubey, R. D. (2017) · Sustainable agriculture reviews · doi:10.1007/978-3-319-53112-0_6 · Cited by 7
Barnes, D. H., Moavenian, A., Sharma, A., & Best, S. M. (2012) · ASM International eBooks · doi:10.31399/asm.hb.v23.a0005655 · Cited by 7
Pyrocarbon for joint replacement
Ross, M., Williams, D. H., Couzens, G. B., & Klawitter, J. J. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821082-6.00005-4 · Cited by 2
Metadata
- Authors
- Amirtharaj Mosas, K. K., Chandrasekar, A. R., Dasan, A., Pakseresht, A., & Galusek, D.
- Venue
- Gels
- Publisher
- MDPI AG
- Published
- 2022-05-21
- Volume
- 8
- Issue
- 5
- Pages
- 323
- ISSN
- 2310-2861 (ISSN-L)
- OpenAlex
- W4281250197
- Cited by
- 256
- References
- 132
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.