Bioprinted Hydrogels for Fibrosis and Wound Healing: Treatment and Modeling
Open accessThe DOI matches its Crossref record; 62 of the 65 references it cites were found in a registry or an index.
Abstract
Three-dimensional (3D) printing has been used to fabricate biomaterial scaffolds with finely controlled physical architecture and user-defined patterning of biological ligands. Excitingly, recent advances in bioprinting have enabled the development of highly biomimetic hydrogels for the treatment of fibrosis and the promotion of wound healing. Bioprinted hydrogels offer more accurate spatial recapitulation of the biochemical and biophysical cues that inhibit fibrosis and promote tissue regeneration, augmenting the therapeutic potential of hydrogel-based therapies. Accordingly, bioprinted hydrogels have been used for the treatment of fibrosis in a diverse array of tissues and organs, including the skin, heart, and endometrium. Furthermore, bioprinted hydrogels have been utilized for the healing of both acute and chronic wounds, which present unique biological microenvironments. In addition to these therapeutic applications, hydrogel bioprinting has been used to generate in vitro models of fibrosis in a variety of soft tissues such as the skin, heart, and liver, enabling high-throughput drug screening and tissue analysis at relatively low cost. As biological research begins to uncover the spatial biological features that underlie fibrosis and wound healing, bioprinting offers a powerful toolkit to recapitulate spatially defined pro-regenerative and anti-fibrotic cues for an array of translational applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 3D printed patch for cardiac fibrosis treatment, with user-defined spatial patterning of cardiac progenitor cells and mesenchymal stem cells. (A) Schematic of extrusion-based 3D printing system. (B) Photograph of extrusion printer. (C) Patterning of distinct bioink formulations and cell types within each layer. (D) 3D printed patch, including zoom-ins of layer-based geometry and distribution of cell types within printed fibers. Top-left scale bar represents 1 mm, while bottom scale bar represents 200 μm. Adapted with permission from [27], 2017, Jang et al.](https://figures.cochat.ai/paper-figures/6259a457f3824474be872fc36932b43c/bioprinted-hydrogels-for-fibrosis-and-wound-healing-treatment-and-modeling-figure-1.jpg)
![Figure 2 Gelatin methacrylate (GelMA) hydrogel with encapsulated platelet lysate (PL) and human dermal fibroblasts (HDFs) for acute wound healing. (A) Schematic of hydrogel bioprinting. Incorporation of PL resulted in sustained release of angiogenic PDGF-BB over 14 days. (B) 3D printed constructs were cytocompatible and promoted dermal cell attachment and matrix deposition. Adapted with permission from [38], 2021, Daikuara et al.](https://figures.cochat.ai/paper-figures/ebc397377abc47b4802347db4e82a26e/bioprinted-hydrogels-for-fibrosis-and-wound-healing-treatment-and-modeling-figure-2.jpg)
![Figure 3 Bioprinting of geometrically complex hydrogel for chronic wound treatment, including conjugated polylysines for antibacterial effects and reduction of reactive oxygen species (ROS) at the wound site. Adapted with permission from [42], 2021, Wang et al.](https://figures.cochat.ai/paper-figures/8ee98cacf1c943c2a1e478d46e223dd5/bioprinted-hydrogels-for-fibrosis-and-wound-healing-treatment-and-modeling-figure-3.jpg)
![Figure 4 Machine-learning-based optimization of scaffold design and 3D printing parameters for wound healing. (A) Schematic of extrusion printing and layer-based photo acquisition. (B) Modeling of printed morphology based on input parameters. (C) Identification of input parameters for desired morphologies. (D) Generation of variable layer geometries using optimized printing conditions. (E) Association of macroscopic hydrogel properties with biological outcomes in wound healing. Adapted with permission from [43], 2022, Chen et al.](https://figures.cochat.ai/paper-figures/334faafc83684498bb967ebbb203bbab/bioprinted-hydrogels-for-fibrosis-and-wound-healing-treatment-and-modeling-figure-4.jpg)
![Figure 5 3D printing of decellularized liver matrix with biomimetic morphology and user-defined patterning of regional stiffness. Greater stiffness resulted in enhanced tumor cell invasion into surrounding regions (bottom right). Adapted with permission from [60], 2018, Ma et al.](https://figures.cochat.ai/paper-figures/26fd90d3c5dd46ed9b5494a1cbc72d54/bioprinted-hydrogels-for-fibrosis-and-wound-healing-treatment-and-modeling-figure-5.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“While liver transplantation and pharmacological treatments are the primary therapeutic options, liver transplantation faces several obstacles, including a shortage of organ donors, immune rejection, and the high costs associated with the procedure [16–19].”
From Constructing biomimetic microenvironments for liver regeneration (2025) · doi:10.1186/s12951-025-03729-9 · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gurtner, G. C., Werner, S., Barrandon, Y., & Longaker, M. T. (2008) · Nature · doi:10.1038/nature07039 · Cited by 6,542 · cited 5×
“Chronic wounds, in contrast, are characterized by a stark absence of dermal regeneration and often occur as a consequence of prolonged inflammation, oxidative stress, diabetic conditions, necrotic tissue accumulation, pressure injury, or other factors that inhibit progression of the typical wound-healing sequence [33,…”
BackgroundSelf-citationChallenges in the Treatment of Chronic Wounds
Frykberg, R. G., & Banks, J. (2015) · Advances in Wound Care · doi:10.1089/wound.2015.0635 · Cited by 2,437 · cited 7×
“Chronic wounds are frequently associated with vascular disease and/or diabetes, and are characterized by a number of common biological features such as prolonged inflammation, susceptibility to infection, and accumulation of reactive oxygen species (ROS) [34].”
BackgroundInfluentialHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805 · cited 1×
“Freeform reversible embedding of suspended hydrogels (FRESH), for instance, utilizes a gelatin microparticle support bath to physically support the deposition of soft, biologically relevant materials, including collagen and fibrin, which is followed by removal of the support bath through temperature elevation [13].”
BackgroundThe pathogenesis of cardiac fibrosis
Kong, P., Christia, P., & Frangogiannis, N. G. (2014) · Cellular and Molecular Life Sciences · doi:10.1007/s00018-013-1349-6 · Cited by 1,567 · cited 3×
“Another promising route of investigation may be the targeted modulation of activated fibroblast subpopulations, which are largely responsible for fibrotic ECM deposition [1,24].”
BackgroundMultivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396 · cited 2×
“in 3D printing technology, such as the adoption of cytocompatible photoabsorbers to spatially constrain light-induced polymerization, may be able to address this by enabling more geometrically complex architectures to be printed using stereolithography and other light-based techniques [9,61].”
Background3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862 · cited 2×
“Inkjet printing, in contrast, involves the piezoelectric and/or thermal deposition of small droplets of bioink onto a substrate [6,11].”
BackgroundDesign and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725 · cited 2×
“Many bioprinting approaches to mimicking the skin have therefore featured sequential deposition of layer-specific cell types such as fibroblasts and keratinocytes for the dermis and epidermis, respectively [11,48,54].”
BackgroundJang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673 · cited 5×
“Adapted with permission from [27], 2017, Jang et al.”
BackgroundMethodInfluentialSkin tissue engineering — In vivo and in vitro applications
Groeber, F., Holeiter, M., Hampel, M., Hinderer, S., & Schenke-Layland, K. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.01.005 · Cited by 633 · cited 1×
“While local cell proliferation and ECM deposition are required for skin regeneration, these processes often must be balanced by inhibition of wound contraction, local inflammation, and other factors that drive fibrotic tissue growth [35].”
BackgroundPreventing Engrailed-1 activation in fibroblasts yields wound regeneration without scarring
Mascharak, S., desJardins-Park, H. E., Davitt, M. F., Griffin, M., Borrelli, M. R., Moore, A. L., Chen, K., Duoto, B., Chinta, M., Foster, D. S., et al. (2021) · Science · doi:10.1126/science.aba2374 · Cited by 617 · cited 5×
“Future research may be able to build upon recent scRNA-seq analyses of acute and chronic wounds to target more specific cell subpopulations, including transcriptionally defined fibroblast subtypes, that modulate these unique wound microenvironments [1,18,19].”
BackgroundSelf-citationBiofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613 · cited 1×
“Lastly, while hydrogel bioprinting has successfully produced small-scale tissue constructs for research and modeling, translation to the clinic will require improvements to the scalability of bioprinting processes, with additional consideration of factors such as oxygen diffusion, structural integrity, and print speed…”
BackgroundFocal adhesion kinase links mechanical force to skin fibrosis via inflammatory signaling
Wong, V. W., Rustad, K. C., Akaishi, S., Sorkin, M., Glotzbach, J. P., Januszyk, M., Nelson, E. R., Levi, K., Paterno, J., Vial, I. N., et al. (2012) · Nature Medicine · doi:10.1038/nm.2574 · Cited by 515 · cited 2×
“Alternatively, given the near-universal relevance of mechanobiological factors to fibrosis in various organs, bioprinted hydrogels may be adapted to target specific mechanotransduction pathways such as FAK and YAP/TAZ [18,32].”
BackgroundSelf-citationReview of Intrauterine Adhesions
Deans, R., & Abbott, J. (2010) · Journal of Minimally Invasive Gynecology · doi:10.1016/j.jmig.2010.04.016 · Cited by 500 · cited 3×
“lated to reproductive health, including miscarriage and infertility [28].”
BackgroundIn vitro models for liver toxicity testing
Soldatow, V. Y., LeCluyse, E. L., Griffith, L. G., & Rusyn, I. (2013) · Toxicol. Res. · doi:10.1039/c2tx20051a · Cited by 472 · cited 3×
“brogenesis, have immense value for academic and industrial research [58].”
BackgroundInfluentialDaly, A. C., Davidson, M. D., & Burdick, J. A. (2021) · Nature Communications · doi:10.1038/s41467-021-21029-2 · Cited by 470 · cited 2×
“modulated the relative concentrations of cardiomyocytes and cardiac fibroblasts in distinct areas of a 3D printed, spheroid-based microtissue to mimic the localized onset of fibrotic regions [56].”
BackgroundMethodNguyen, D. G., Funk, J., Robbins, J. B., Crogan-Grundy, C., Presnell, S. C., Singer, T., & Roth, A. B. (2016) · PLOS ONE · doi:10.1371/journal.pone.0158674 · Cited by 379 · cited 4×
“extrusion-printed liver models using a similar composition of cell phenotypes, producing 3D tissues that outperformed 2D cell-culture models in replicating native intercellular hepatocyte junctions and endothelial networks [59].”
BackgroundInfluentialJoshi, N., Watanabe, S., Verma, R., Jablonski, R. P., Chen, C.-I., Cheresh, P., Markov, N. S., Reyfman, P. A., McQuattie-Pimentel, A. C., Sichizya, L., et al. (2020) · European Respiratory Journal · doi:10.1183/13993003.00646-2019 · Cited by 344
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337 · cited 2×
“To reduce the imposed shear force on bioinks and/or pressure required for extrusion, hydrogels can be formulated using shear thinning materials, modulated in temperature to reduce viscosity, or deposited as low-viscosity monomeric solutions for crosslinking after printing [7,10].”
BackgroundDirect 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282 · cited 2×
“, instead, printed fibroblast- and keratinocyte-loaded bioinks within a transient gelatin support bath and PCL scaffold to maintain the structural stability of their skin construct during printing [54].”
BackgroundMa, X., Yu, C., Wang, P., Xu, W., Wan, X., Lai, C. S. E., Liu, J., Koroleva-Maharajh, A., & Chen, S. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.026 · Cited by 281 · cited 3×
“, for instance, used digital light processing to print liver dECM hydrogels that promoted variable degrees of hepatocellular carcinoma cell proliferation, invasion, and metastatic gene expression depending on regional material stiffness (Figure 5) [60].”
BackgroundMethodInfluentialValverde, I., Gomez-Ciriza, G., Hussain, T., Suarez-Mejias, C., Velasco-Forte, M. N., Byrne, N., Ordoñez, A., Gonzalez-Calle, A., Anderson, D., Hazekamp, M. G., et al. (2017) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezx208 · Cited by 280 · cited 2×
“mography scans to print anatomical constructs of the heart using fused deposition modeling, which were used for patient-specific surgical planning [57].”
Method3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Jang, T.-S., Jung, H.-D., Pan, H. M., Han, W. T., Chen, S., & Song, J. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.126 · Cited by 251
Multi-omic analysis reveals divergent molecular events in scarring and regenerative wound healing
Mascharak, S., Talbott, H. E., Januszyk, M., Griffin, M., Chen, K., Davitt, M. F., Demeter, J., Henn, D., Bonham, C. A., Foster, D. S., et al. (2022) · Cell Stem Cell · doi:10.1016/j.stem.2021.12.011 · Cited by 240
Self-citationMelt electrowriting with additive manufacturing principles
Dalton, P. D. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.007 · Cited by 237 · cited 1×
“Other 3D printing modalities that have been applied to hydrogels include laser-assisted bioprinting, which utilizes periodic laser excitation to heat a donor substrate and release spatially defined droplets of bioink adsorbed to the substrate, and melt electrowriting, in which an applied voltage is used to generate sp…”
MethodSkin Structure–Function Relationships and the Wound Healing Response to Intrinsic Aging
Blair, M. J., Jones, J. D., Woessner, A. E., & Quinn, K. P. (2020) · Advances in Wound Care · doi:10.1089/wound.2019.1021 · Cited by 228 · cited 1×
“Skin is a heterogeneous and multilayered organ, with variations in cellular and biochemical composition from the subdermal to dermal and epidermal layers [53].”
BackgroundLin, X., Zhao, X., Xu, C., Wang, L., & Xia, Y. (2022) · Journal of Polymer Science · doi:10.1002/pol.20220154 · Cited by 226 · cited 1×
“Thus, researchers are pursuing strategies for mechanical enhancement of hydrogels such as polymeric fiber reinforcement and co-printing of support scaffolds [16].”
BackgroundAlginate Hydrogels with Embedded ZnO Nanoparticles for Wound Healing Therapy
Cleetus, C. M., Alvarez Primo, F., Fregoso, G., Lalitha Raveendran, N., Noveron, J. C., Spencer, C. T., Ramana, C. V., & Joddar, B. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s255937 · Cited by 190 · cited 1×
“3D printed alginate hydrogels with doped ZnO nanoparticles, which decreased bacterial growth but did not affect mammalian cell viability [40].”
BackgroundThree-dimensional printing of multilayered tissue engineering scaffolds
Bittner, S. M., Guo, J. L., Melchiorri, A., & Mikos, A. G. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.006 · Cited by 185 · cited 8×
“Many bioprinting approaches to mimicking the skin have therefore featured sequential deposition of layer-specific cell types such as fibroblasts and keratinocytes for the dermis and epidermis, respectively [11,48,54].”
BackgroundMethodSelf-citationShin, Y. J., Shafranek, R. T., Tsui, J. H., Walcott, J., Nelson, A., & Kim, D.-H. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.006 · Cited by 174 · cited 1×
“4–89 kPa by the variation of PEG concentration [49].”
BackgroundHydrogel‐Based 3D Bioprinting for Bone and Cartilage Tissue Engineering
Abdollahiyan, P., Oroojalian, F., Mokhtarzadeh, A., & de la Guardia, M. (2020) · Biotechnology Journal · doi:10.1002/biot.202000095 · Cited by 158 · cited 2×
“For instance, bonetargeted bioinks may include tissue-specific ratios of calcium phosphates and angiogenic factors, while cartilage-targeted bioinks may instead contain chondrogenic factors and angiostatic factors [15].”
Backgroundde Hilster, R. H. J., Sharma, P. K., Jonker, M. R., White, E. S., Gercama, E. A., Roobeek, M., Timens, W., Harmsen, M. C., Hylkema, M. N., & Burgess, J. K. (2020) · American Journal of Physiology-Lung Cellular and Molecular Physiology · doi:10.1152/ajplung.00451.2019 · Cited by 153
Spatial transcriptomics and proteomics technologies for deconvoluting the tumor microenvironment
Wang, N., Li, X., Wang, R., & Ding, Z. (2021) · Biotechnology Journal · doi:10.1002/biot.202100041 · Cited by 146
Norona, L. M., Nguyen, D. G., Gerber, D. A., Presnell, S. C., & LeCluyse, E. L. (2016) · Toxicological Sciences · doi:10.1093/toxsci/kfw169 · Cited by 144 · cited 2×
“fibrogenesis in response to methotrexate and thioacetamide exposure [50].”
BackgroundChen, B., Dong, J., Ruelas, M., Ye, X., He, J., Yao, R., Fu, Y., Liu, Y., Hu, J., Wu, T., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201843 · Cited by 135 · cited 6×
“that maximized tissue regeneration both in vitro and in vivo [43].”
BackgroundMethodInfluential3D Bioprinting a human iPSC-derived MSC-loaded scaffold for repair of the uterine endometrium
Ji, W., Hou, B., Lin, W., Wang, L., Zheng, W., Li, W., Zheng, J., Wen, X., & He, P. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.09.012 · Cited by 132
Wang, X., Qi, J., Zhang, W., Pu, Y., Yang, R., Wang, P., Liu, S., Tan, X., & Chi, B. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.115 · Cited by 130 · cited 3×
“eration in a rat model of chronic wounds (Figure 3) [42].”
BackgroundMethodInfluentialThe Spectrum of Scarring in Craniofacial Wound Repair
desJardins-Park, H. E., Mascharak, S., Chinta, M. S., Wan, D. C., & Longaker, M. T. (2019) · Frontiers in Physiology · doi:10.3389/fphys.2019.00322 · Cited by 119 · cited 10×
“The resulting scar tissue is poorly functional compared to healthy skin, exhibiting inferior mechanical properties, hair follicle development, gland formation, and more [1].”
BackgroundSelf-citationRecent Progress in Electrospun Polyacrylonitrile Nanofiber-Based Wound Dressing
Huang, C., Xu, X., Fu, J., Yu, D.-G., & Liu, Y. (2022) · Polymers · doi:10.3390/polym14163266 · Cited by 115
Wu, Z., & Hong, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14090 · Cited by 114 · cited 2×
“similarly incorporated silver nanoparticles in bioprinted polyacrylamide hydrogels, which produced superior healing in Staphylococcus aureus-infected chronic wounds [41].”
BackgroundJang, M. J., Bae, S. K., Jung, Y.-S., Kim, J. C., Kim, J. S., Park, S. K., Suh, J. S., Yi, S., Ahn, S. H., & Lim, J. O. (2021) · Biomedical Materials · doi:10.1088/1748-605x/abf1a8 · Cited by 113 · cited 2×
“Given the importance of angiogenesis to wound healing, many bioprinted hydrogels have also incorporated pro-angiogenic factors [33,38,39].”
BackgroundElectrospun hierarchical structural films for effective wound healing
Xu, H., Zhang, F., Wang, M., Lv, H., Yu, D., Liu, X., & Shen, H. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212795 · Cited by 113 · cited 1×
“Additionally, composite constructs have been utilized to provide secondary benefits to tissue regeneration such as anti-microbial treatment during skin wound healing [3,4].”
BackgroundChen, Z., Wu, H., Wang, H., Zaldivar-Silva, D., Agüero, L., Liu, Y., Zhang, Z., Yin, Y., Qiu, B., Zhao, J., et al. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.112422 · Cited by 96 · cited 1×
“Additionally, composite constructs have been utilized to provide secondary benefits to tissue regeneration such as anti-microbial treatment during skin wound healing [3,4].”
BackgroundBioengineered 3D Models to Recapitulate Tissue Fibrosis
Sacchi, M., Bansal, R., & Rouwkema, J. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.010 · Cited by 92 · cited 3×
“For instance, the effects of fibrotic drug treatment on individual cell types of interest, such as activated fibroblasts, can be studied in isolation using bioprinted models [46].”
BackgroundEngineered Biomaterial Platforms to Study Fibrosis
Davidson, M. D., Burdick, J. A., & Wells, R. G. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901682 · Cited by 89 · cited 1×
“Compared to animal models, these in vitro bioprinted models also offer finer control over microenvironmental factors such as biochemical composition, mechanical loading, and cell phenotypic ratio [46,47].”
Machine Learning in Tissue Engineering
Guo, J. L., Januszyk, M., & Longaker, M. T. (2022) · Tissue Engineering Part A · doi:10.1089/ten.tea.2022.0128 · Cited by 86 · cited 2×
“Neverth less, ML analysis has not yet been widely adopted in bioprinting research [45].”
BackgroundMethodSelf-citationSpatiotemporal control of growth factors in three-dimensional printed scaffolds
Bittner, S. M., Guo, J. L., & Mikos, A. G. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00032 · Cited by 80 · cited 10×
“Beyond structural support, composite constructs can offer a more biologically relevant mixture of mechanical and biological properties for heterogeneous tissue types such as osteochondral tissue [9].”
BackgroundSelf-citationIbañez, R. I. R., do Amaral, R. J. F. C., Reis, R. L., Marques, A. P., Murphy, C. M., & O’Brien, F. J. (2021) · Polymers · doi:10.3390/polym13152510 · Cited by 74 · cited 2×
“While many bioprinted hydrogels have been developed for purposes of skin tissue engineering, a few have been designed specifically to reduce scar formation at the site of injury [11,21,22].”
BackgroundSwelling Behaviors of 3D Printed Hydrogel and Hydrogel-Microcarrier Composite Scaffolds
Bittner, S. M., Pearce, H. A., Hogan, K. J., Smoak, M. M., Guo, J. L., Melchiorri, A. J., Scott, D. W., & Mikos, A. G. (2021) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0377 · Cited by 71 · cited 1×
“To reduce the imposed shear force on bioinks and/or pressure required for extrusion, hydrogels can be formulated using shear thinning materials, modulated in temperature to reduce viscosity, or deposited as low-viscosity monomeric solutions for crosslinking after printing [7,10].”
BackgroundSelf-citationBersini, S., Gilardi, M., Ugolini, G. S., Sansoni, V., Talò, G., Perego, S., Zanotti, S., Ostano, P., Mora, M., Soncini, M., et al. (2018) · Cell Reports · doi:10.1016/j.celrep.2018.11.092 · Cited by 70
Daikuara, L. Y., Yue, Z., Skropeta, D., & Wallace, G. G. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.01.021 · Cited by 64 · cited 3×
“Adapted with permission from [38], 2021, Daikuara et al.”
BackgroundMethodFeng, M., Hu, S., Qin, W., Tang, Y., Guo, R., & Han, L. (2021) · ACS Omega · doi:10.1021/acsomega.1c02117 · Cited by 60 · cited 2×
“to IUA formation following injury in a rat model [29].”
BackgroundMethodA multifunctional nanofiber reinforced photo-crosslinking hydrogel for skin wound healing
Yu, F., Khan, A. U. R., Li, Y., Zhao, B., Xie, X., El-Newehy, M. H., El‐Hamshary, H., Morsi, Y., Li, J., Pan, J., et al. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110294 · Cited by 58 · cited 1×
“, on the other hand, printed gelatin hydrogels doped with polycaprolactone (PCL) nanofibers, which present low fiber diameter and high porosity that mimic healthy skin and inhibit fibrosis [37].”
BackgroundMelhem, M. R., Park, J., Knapp, L., Reinkensmeyer, L., Cvetkovic, C., Flewellyn, J., Lee, M. K., Jensen, T. W., Bashir, R., Kong, H., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00176 · Cited by 55 · cited 2×
“used stereolithography to print poly(ethylene glycol) (PEG) hydrogels with patterned microchannels for the delivery of MSC secreted paracrine factors [26].”
BackgroundMethodChen, L., Li, Z., Zheng, Y., Zhou, F., Zhao, J., Zhai, Q., Zhang, Z., Liu, T., Chen, Y., & Qi, S. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.09.008 · Cited by 54 · cited 2×
“, for instance, printed decellularized ECM (dECM) hydrogels that retained the topological and mechanical properties of healthy dermal matrix, which effectively reduced skin contraction and scar formation upon implantation [21].”
BackgroundWen, J., Hou, B., Lin, W., Guo, F., Cheng, M., Zheng, J., He, P., & Ji, W. (2022) · Biomaterials Science · doi:10.1039/d2bm00109h · Cited by 53 · cited 8×
“IUAs can lead to a number of negative consequences re- lated to reproductive health, including miscarriage and infertility [28].”
BackgroundMethodInfluentialIbañez, R. I. R., do Amaral, R. J. F. C., Simpson, C. R., Casey, S. M., Reis, R. L., Marques, A. P., Murphy, C. M., & O’Brien, F. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109915 · Cited by 49 · cited 2×
“Nevertheless, most bioprinted hydrogels have incorporated a limited array of cell phenotypes and biological ligands—typically, those relevant to angiogenesis, healthy tissue regeneration, or inhibition of inflammatory processes [8,23,25,30].”
BackgroundParacrine and cell autonomous signalling in pancreatic cancer progression and metastasis
Thomas, S. K., Lee, J., & Beatty, G. L. (2020) · EBioMedicine · doi:10.1016/j.ebiom.2020.102662 · Cited by 47 · cited 1×
“Furthermore, each of these biological processes is dependent on complex interactions between cells, biological ligands, and extracellular matrix (ECM) structures at multiple length-scales [1,2].”
BackgroundNavarro, J., Clohessy, R. M., Holder, R. C., Gabard, A. R., Herendeen, G. J., Christy, R. J., Burnett, L., & Fisher, J. P. (2019) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0181 · Cited by 45 · cited 2×
“The resulting hydrogels produced superior non-fibrotic wound healing, including gland and hair follicle formation, in a porcine thermal burn model [36].”
BackgroundGuan, G., Huo, D., Li, Y., Zhao, X., Li, Y., Qin, Z., Sun, D., Yang, G., Yang, M., Tan, J., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.04.010 · Cited by 38 · cited 4×
“Nevertheless, most bioprinted hydrogels have incorporated a limited array of cell phenotypes and biological ligands—typically, those relevant to angiogenesis, healthy tissue regeneration, or inhibition of inflammatory processes [8,23,25,30].”
BackgroundInfluentialGuo, J. L., Díaz-Gómez, L. A., Xie, V. Y., Bittner, S. M., Jiang, E. Y., Wang, B., & Mikos, A. G. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00136 · Cited by 26 · cited 1×
“, cartilage, blood vessels, and bone—within the osteochondral unit [9,14].”
BackgroundSelf-citationModeling human hypertrophic scars with 3D preformed cellular aggregates bioprinting
Yao, B., Zhu, D., Xiaoli, C., Jirigala, E., Song, W., Li, Z., Hu, T. H., Ping, Z., Jian-jun, L., Wang, Y., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.09.004 · Cited by 25 · cited 2×
“developed in vitro models of scar tissue using extrusion printing of pre-cultured aggregates of scar-derived fibroblasts and scar-derived dECM [55].”
BackgroundChae, H. J., Lee, S. H., Son, H., Han, S., & Lim, T. (2022) · IEEE Computer Society Conference on Computer Vision and Pattern Recognition/Proceedings - IEEE Computer Society Conference on Computer Vision and Pattern Recognition/Proceedings · doi:10.1109/cvpr52688.2022.00257 · Cited by 20
Cited by
3D Printing‐Based Hydrogel Dressings for Wound Healing
Zhou, X., Yu, X., You, T., Zhao, B., Dong, L., Huang, C., Zhou, X., Xing, M. M. Q., Qian, W., & Luo, G. (2024) · Advanced Science · doi:10.1002/advs.202404580 · Cited by 198
Recent Developments in 3D-(Bio)printed Hydrogels as Wound Dressings
Kammona, O., Tsanaktsidou, E., & Kiparissides, C. A. (2024) · Gels · doi:10.3390/gels10020147 · Cited by 73
Modelling and targeting mechanical forces in organ fibrosis
Mascharak, S., L. Guo, J., Griffin, M., E. Berry, C., C. Wan, D., & T. Longaker, M. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-023-00144-3 · Cited by 59
“For example, pro-regenerative scaffolds can be fabricated from natural biopolymers, such as gelatin, dextran and hyaluronic acid, to provide porous structural support for cell infiltration and tissue regeneration following injury 138–140 .”
InfluentialSelf-citationTehrany, P. M., Rahmanian, P., Rezaee, A., Ranjbarpazuki, G., Fard, F. S., salmanpour, Y. A., Zandieh, M. A., Ranjbarpazuki, A., Asghari, S., Javani, N., et al. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117087 · Cited by 67
Ding, N., Fu, X., Gui, Q., Wu, M., Niu, Z., Du, A., Liu, J., Wu, H., Wang, Y., Yue, X., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202303192 · Cited by 22
Metadata
- Authors
- Guo, J. L., & Longaker, M. T.
- Affiliations
- Stanford Medicine (US)
- Corresponding author
- Longaker, Michael T.
- Venue
- Gels
- Publisher
- MDPI AG
- Published
- 2022-12-27
- Volume
- 9
- Issue
- 1
- Pages
- 19
- ISSN
- 2310-2861 (ISSN-L)
- PMC
- PMC9857994
- OpenAlex
- W4312226674
- Cited by
- 23
- References
- 65
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 9 · 2023: 4
- FWCI
- 0.38
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Gels (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Hagey Laboratory for Pediatric Regenerative Medicine (1R01GM136659-01)
- Wu Tsai Human Performance Alliance (1R01GM136659-01)
- National Institutes of Health (1R01GM136659-01)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Wound Healing and Treatments
- Keywords
- fibrosis, wound healing, biomimetic scaffolds, tissue regeneration, in vitro fibrosis model, chronic wounds, skin fibrosis, myocardial fibrosis, endometrial fibrosis, liver fibrosis, drug screening, biophysical cues
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.