The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Open accessAbstract
Compared to the common selective laser sintering (SLS) manufacturing method, fused deposition modeling (FDM) seems to be an economical and efficient three-dimensional (3D) printing method for high temperature polymer materials in medical applications. In this work, a customized FDM system was developed for polyether-ether-ketone (PEEK) materials printing. The effects of printing speed, layer thickness, printing temperature and filling ratio on tensile properties were analyzed by the orthogonal test of four factors and three levels. Optimal tensile properties of the PEEK specimens were observed at a printing speed of 60 mm/s, layer thickness of 0.2 mm, temperature of 370 °C and filling ratio of 40%. Furthermore, the impact and bending tests were conducted under optimized conditions and the results demonstrated that the printed PEEK specimens have appropriate mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Durgun, I., & Ertan, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2012-0091 · Cited by 530
Extrusion-based additive manufacturing of PEEK for biomedical applications
Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 406
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Selective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Wu, W., Ye, W., Wu, Z., Geng, P., Wang, Y., & Zhao, J. X. (2017) · Materials · doi:10.3390/ma10080970 · Cited by 144
(2012) · InTech eBooks · doi:10.5772/2397 · Cited by 125
Wu, W., Geng, P., Zhao, J., Zhang, Y., Rosen, D. W., & Zhang, H. B. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000898 · Cited by 123
Cicala, G., Latteri, A., Curto, B. D., Russo, A. L., Recca, G., & Farè, S. (2017) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000343 · Cited by 114
Mechanical Properties of Additively Manufactured PEEK Components Using Fused Filament Fabrication
Rahman, K. M., Letcher, T. M., & Reese, R. (2015) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2015-52209 · Cited by 107
On the mechanical behaviour of PEEK and HA cranial implants under impact loading
Garcia‐Gonzalez, D., Jayamohan, J., Sotiropoulos, S. N., Yoon, S.-H., Cook, J. E. T., Siviour, C. R., Árias, A., & Jérusalem, A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.012 · Cited by 95
Wang, Y., Rouholamin, D., Davies, R., & Ghita, O. R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.094 · Cited by 59
Elements and Materials Improve the FDM Products: A Review
Bala, A. S., Wahab, S., & Ahmad, M. (2016) · Advanced engineering forum · doi:10.4028/www.scientific.net/aef.16.33 · Cited by 48
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Popescu, D., Zapciu, A., Amza, C., Baciu, F., & Marinescu, R. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.05.020 · Cited by 1,015
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Han, X., Yang, D., Yang, C., Spintzyk, S., Scheideler, L., Li, P., Li, D., Geis-Gerstorfer, J., & Rupp, F. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8020240 · Cited by 361
Metadata
- Authors
- Deng, X., Zeng, Z., Peng, B., Yan, S., & Ke, W.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-01-30
- Volume
- 11
- Issue
- 2
- Pages
- 216
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2793177870
- Cited by
- 265
- References
- 15
- FWCI
- 13.14
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.