The DOI matches its Crossref record; 109 of the 109 references it cites were found in a registry or an index.
Metallic Scaffolds for Bone Regeneration
Open accessAbstract
Bone tissue engineering is an emerging interdisciplinary field in Science, combining expertise in medicine, material science and biomechanics. Hard tissue engineering research is focused mainly in two areas, osteo and dental clinical applications. There is a lot of exciting research being performed worldwide in developing novel scaffolds for tissue engineering. Although, nowadays the majority of the research effort is in the development of scaffolds for non-load bearing applications, primarily using soft natural or synthetic polymers or natural scaffolds for soft tissue engineering; metallic scaffolds aimed for hard tissue engineering have been also the subject of in vitro and in vivo research and industrial development. In this article, descriptions of the different manufacturing technologies available to fabricate metallic scaffolds and a compilation of the reported biocompatibility of the currently developed metallic scaffolds have been performed. Finally, we highlight the positive aspects and the remaining problems that will drive future research in metallic constructs aimed for the reconstruction and repair of bone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomechanics. Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1982) · Journal of Applied Mechanics · doi:10.1115/1.3162171 · Cited by 6,025
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Novel Regulators of Bone Formation: Molecular Clones and Activities
Wozney, J. M., Rosen, V., Celeste, A. J., Mitsock, L. M., Whitters, M. J., Kriz, R. W., Hewick, R. M., & Wang, E. A. (1988) · Science · doi:10.1126/science.3201241 · Cited by 3,903
Manufacture, characterisation and application of cellular metals and metal foams
Banhart, J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00002-5 · Cited by 3,780
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Buser, D., Schenk, R. K., Steinemann, S., Fiorellini, J. P., Fox, C. H., & Stich, H. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820250708 · Cited by 1,719
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
(2001) · CRC Press eBooks · doi:10.1201/b14263 · Cited by 1,451
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
In vitro and in vivo corrosion measurements of magnesium alloys
Witte, F., Fischer, J., Nellesen, J., Crostack, H.-A., Kaese, V., Pisch, A., Beckmann, F., & Windhagen, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.037 · Cited by 1,386
Saris, N.-E. L., Mervaala, E., Karppanen, H., Khawaja, J. A., & Lewenstam, A. (2000) · Clinica Chimica Acta · doi:10.1016/s0009-8981(99)00258-2 · Cited by 1,366
Role of material surfaces in regulating bone and cartilage cell response
Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331
Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements
Rho, J. Y., Ashman, R. B., & Turner, C. H. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90042-d · Cited by 1,283
Mechanical Design in Organisms
Wainwright, S. A., Biggs, W. D., Currey, J. D., & Gosline, J. M. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv143mdjg · Cited by 1,263
Trabecular bone modulus–density relationships depend on anatomic site
Morgan, E. F., Bayraktar, H. H., & Keaveny, T. M. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00071-x · Cited by 1,209 · cited 1×
“6 g/cm [15].”
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial
Bobyn, J. D., Stackpool, G. J., Hacking, S. A., Tanzer, M., & Krygier, J. J. (1999) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.81b5.0810907 · Cited by 1,037
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
THE ROLE OF GROWTH FACTORS IN THE REPAIR OF BONE: BIOLOGY AND CLINICAL APPLICATIONS
LIEBERMAN, J. R., DALUISKI, A., & EINHORN, T. A. (2002) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200206000-00022 · Cited by 932
Erbel, R., Di Mario, C., Bartunek, J., Bonnier, J., de Bruyne, B., Eberli, F. R., Erne, P., Haude, M., Heublein, B., Horrigan, M., et al. (2007) · The Lancet · doi:10.1016/s0140-6736(07)60853-8 · Cited by 907
Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?
Heublein, B., Rohde, R., Kaese, V, Niemeyer, M., Hartung, W., & Haverich, A. (2003) · Heart · doi:10.1136/heart.89.6.651 · Cited by 806
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Mechanical Testing of Bone and the Bone-Implant Interface
(1999) · CRC Press eBooks · doi:10.1201/9781420073560 · Cited by 709
Boden, S. D., Zdeblick, T. A., Sandhu, H. S., & Heim, S. E. (2000) · Spine · doi:10.1097/00007632-200002010-00020 · Cited by 667
The Mechanical Properties of Cortical Bone
REILLY, D. T., & BURSTEIN, A. H. (1974) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197456050-00012 · Cited by 653
Davies, J. E. (1991) · University of Toronto Press eBooks · doi:10.3138/9781442671508 · Cited by 644
Biodegradable magnesium–hydroxyapatite metal matrix composites
Witte, F., Feyerabend, F., Maier, P., Fischer, J., Störmer, M., Blawert, C., Dietzel, W., & Hort, N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.12.027 · Cited by 642
The mechanical properties of bone.
Evans, F. G. (1969) · PubMed · Cited by 587
Cellular materials as porous scaffolds for tissue engineering
Freyman, T. M., Yannas, I. V., & Gibson, L. J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00018-9 · Cited by 584
Mechanical properties of porous titanium compacts prepared by powder sintering
Oh, I.-H., Nomura, N., Masahashi, N., & Hanada, S. (2003) · Scripta Materialia · doi:10.1016/j.scriptamat.2003.08.018 · Cited by 569
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Reilly, D. T., Burstein, A. H., & Frankel, V. H. (1974) · Journal of Biomechanics · doi:10.1016/0021-9290(74)90018-9 · Cited by 504
Wirtz, D. C., Schiffers, N., Pandorf, T., Radermacher, K., Weichert, D., & Forst, R. (2000) · Journal of Biomechanics · doi:10.1016/s0021-9290(00)00069-5 · Cited by 500
Design and Development of Three-Dimensional Scaffolds for Tissue Engineering
Liu, C., Xia, Z., & Czernuszka, J. T. (2007) · Chemical Engineering Research and Design · doi:10.1205/cherd06196 · Cited by 483
Processing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
BUCKWALTER, J. A., GLIMCHER, M. J., COOPER, R. R., & RECKER, R. (1995) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199508000-00019 · Cited by 454
Low stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Li, L., Gao, J., & Wang, Y. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.01.004 · Cited by 441
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Biodegradable magnesium scaffolds: Part 1: Appropriate inflammatory response
Witte, F., Ulrich, H., Rudert, M., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31170 · Cited by 409
Bone ingrowth in porous titanium implants produced by 3D fiber deposition
Li, J. P., Habibovic, P., van den Doel, M., Wilson, C. E., de Wijn, J. R., van Blitterswijk, C. A., & de Groot, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.020 · Cited by 393
Bio-CAD modeling and its applications in computer-aided tissue engineering
Sun, W., Starly, B., Nam, J., & Darling, A. (2005) · Computer-Aided Design · doi:10.1016/j.cad.2005.02.002 · Cited by 386
Nonallograft Osteoconductive Bone Graft Substitutes
Bucholz, R. W. (2002) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200202000-00006 · Cited by 356
Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering
Mathieu, L. M., Mueller, T. L., Bourban, P.-E., Pioletti, D. P., Müller, R., & Månson, J.-A. E. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.015 · Cited by 349
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Ryan, G. E., Pandit, A. S., & Apatsidis, D. P. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.05.032 · Cited by 340
Sittig, C., Textor, M., Spencer, N. D., Wieland, M., & Vallotton, P. H. (1999) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008840026907 · Cited by 332
Tissue Engineering of Bone: Cell Based Strategies
Bruder, S. P., & Fox, B. S. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00008 · Cited by 324
Biodegradable magnesium scaffolds: Part II: Peri‐implant bone remodeling
Witte, F., Ulrich, H., Palm, C., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31293 · Cited by 312
Bone bonding at natural and biomaterial surfaces
Davies, J. E. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.049 · Cited by 309
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288
Kujala, S., Ryhänen, J., Danilov, A., & Tuukkanen, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00359-4 · Cited by 284
Tissue response to porous tantalum acetabular cups
Bobyn, J., Toh, K.-K., Hacking, S. A., Tänzer, M., & Krygier, J. J. (1999) · The Journal of Arthroplasty · doi:10.1016/s0883-5403(99)90062-1 · Cited by 281
Collagen‐crystal relationships in bone as seen in the electron microscope
Robinson, R. A., & Watson, M. L. (1952) · The Anatomical Record · doi:10.1002/ar.1091140302 · Cited by 275
Barrère, F., van der Valk, C. M., Meijer, G., Dalmeijer, R. A. J., de Groot, K., & Layrolle, P. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10057 · Cited by 274
Tensile yield in compact bone is determined by strain, post-yield behaviour by mineral content
Currey, J. D. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.08.008 · Cited by 272
Structure and function of bone collagen fibrils
Katz, E. P., & Li, S.-T. (1973) · Journal of Molecular Biology · doi:10.1016/0022-2836(73)90230-1 · Cited by 265
In vivo evaluation of biodegradable magnesium alloy bone implant in the first 6 months implantation
Zhang, E., Xu, L., Yu, G., Pan, F., & Yang, K. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32132 · Cited by 256
Osteogenecity of octacalcium phosphate coatings applied on porous metal implants
Barrère, F., van der Valk, C. M., Dalmeijer, R. A. J., Meijer, G., van Blitterswijk, C. A., de Groot, K., & Layrolle, P. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10454 · Cited by 248
TSAO, A. K., ROBERSON, J. R., CHRISTIE, M. J., DORE, D. D., HECK, D. A., ROBERTSON, D. D., & POGGIE, R. A. (2005) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200511002-00003 · Cited by 242
Hybrid bone implants: Self-assembly of peptide amphiphile nanofibers within porous titanium
Sargeant, T. D., Guler, M. O., Oppenheimer, S. M., Mata, A., Satcher, R. L., Dunand, D. C., & Stupp, S. I. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.012 · Cited by 235
High strength, low stiffness, porous NiTi with superelastic properties
Greiner, C., Oppenheimer, S., & Dunand, D. C. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.07.005 · Cited by 234
The performance of human dental pulp stem cells on different three-dimensional scaffold materials
Zhang, W., Frank Walboomers, X., van Kuppevelt, T. H., Daamen, W. F., Bian, Z., & Jansen, J. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.013 · Cited by 229
Lane, J. M., Tomin, E., & Bostrom, M. P. G. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00011 · Cited by 228
Kneser, U., Schaefer, D. J., Munder, B., Klemt, C., Andree, C., & Stark, G. B. (2002) · Minimally Invasive Therapy & Allied Technologies · doi:10.1080/136457002320174177 · Cited by 228
Biological performance of uncoated and octacalcium phosphate-coated Ti6Al4V
Habibovic, P., Li, J., van der Valk, C. M., Meijer, G., Layrolle, P., van Blitterswijk, C. A., & de Groot, K. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.026 · Cited by 222
Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds
Jones, J. R., Poologasundarampillai, G., Atwood, R., Bernard, D., & Lee, P. D. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.014 · Cited by 206
Jaecques, S. V. N., Van Oosterwyck, H., Muraru, L., Van Cleynenbreugel, T., De Smet, E., Wevers, M., Naert, I., & Vander Sloten, J. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00516-7 · Cited by 186
Growth factor-loaded scaffolds for bone engineering
Jansen, J. A., Vehof, J. W. M., Ruhé, P. Q., Kroeze-Deutman, H., Kuboki, Y., Takita, H., Hedberg, E. L., & Mikos, A. G. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.07.005 · Cited by 185
Lopez-Heredia, M. A., Sohier, J., Gaillard, C., Quillard, S., Dorget, M., & Layrolle, P. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.021 · Cited by 182
In vivo performance of selective electron beam‐melted Ti‐6Al‐4V structures
Ponader, S., von Wilmowsky, C., Widenmayer, M., Lutz, R., Heinl, P., Körner, C., Singer, R. F., Nkenke, E., Neukam, F. W., & Schlegel, K. A. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32337 · Cited by 179
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Surface modifications of bone implants through wet chemistry
Duan, K., & Wang, R. (2006) · Journal of Materials Chemistry · doi:10.1039/b517634d · Cited by 169
Review: Gene- and Stem Cell–Based Therapeutics for Bone Regeneration and Repair
Kimelman, N. B., Pelled, G., Helm, G. A., Huard, J., Schwarz, E. M., & Gazit, D. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0096 · Cited by 163
Structure and Development of the Skeleton
Marks, S. C., & Odgren, P. R. (2002) · Principles of Bone Biology · doi:10.1016/b978-012098652-1.50103-7 · Cited by 160
Ford, C. M., & Keaveny, T. M. (1996) · Journal of Biomechanics · doi:10.1016/0021-9290(96)00062-0 · Cited by 158
Biomaterials in craniofacial reconstruction
Cho, Y. R., & Gosain, A. K. (2004) · Clinics in Plastic Surgery · doi:10.1016/j.cps.2004.03.001 · Cited by 153
Michiardi, A., Aparicio, C., Planell, J. A., & Gil, F. J. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30441 · Cited by 150
Journal of Bone and Mineral Research
Robey, P. G., Fedarko, N. S., Hefferan, T. E., Bianco, P., Vetter, U. K., Grzesik, W. J., Friedenstein, A. J., van der Pluijm, G., Mintz, K. P., Young, M. F., et al. (1993) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.5650081310 · Cited by 144
Wu, S., Liu, X., Hu, T., Chu, P. K.-H., Ho, J., Chan, Y., Yeung, K., Chu, C. L., Hung, T., Huo, K., et al. (2008) · Nano Letters · doi:10.1021/nl802145n · Cited by 144
Zdeblick, T. A., & Phillips, F. M. (2003) · Spine · doi:10.1097/01.brs.0000076841.93570.78 · Cited by 141
Bone tissue reconstruction using titanium fiber mesh combined with rat bone marrow stromal cells
van den Dolder, J., Farber, E., Spauwen, P. H. M., & Jansen, J. A. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00537-9 · Cited by 130
Bone formation in calcium-phosphate-coated titanium mesh
Vehof, J. W. M., Spauwen, P. H. M., & Jansen, J. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00094-6 · Cited by 125
Sikavitsas, V. I., van den Dolder, J., Bancroft, G. N., Jansen, J. A., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10126 · Cited by 124
Morphological characterization and in vitro biocompatibility of a porous nickel–titanium alloy
Prymak, O., Bogdanski, D., Köller, M., Esenwein, S. A., Muhr, G., Beckmann, F., Donath, T., Assad, M., & Epple, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.029 · Cited by 120
Producing metal parts with selective laser sintering/hot isostatic pressing
Das, S., Wohlert, M., Beaman, J. J., & Bourell, D. L. (1998) · JOM · doi:10.1007/s11837-998-0299-1 · Cited by 120
Biocompatibility and hemocompatibility of surface‐modified NiTi alloys
Armitage, D. A., Parker, T. L., & Grant, D. M. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10549 · Cited by 110
Scaffold-based bone engineering by using genetically modified cells
Hutmacher, D. W., & Garcı́a, A. J. (2005) · Gene · doi:10.1016/j.gene.2004.12.040 · Cited by 90
Zou, X., Li, H., Bünger, M., Egund, N., Lind, M., & Bünger, C. E. (2004) · The Spine Journal · doi:10.1016/s1529-9430(03)00407-8 · Cited by 83
Mishra, S. K., & Tate, M. L. K. (2003) · The Anatomical Record Part A Discoveries in Molecular Cellular and Evolutionary Biology · doi:10.1002/ar.a.10079 · Cited by 76
Use of bone morphogenetic proteins in traumatology
Westerhuis, R. J., van Bezooijen, R. L., & Kloen, P. (2005) · Injury · doi:10.1016/j.injury.2005.02.047 · Cited by 73
Properties and medical applications of shape memory alloys.
Tarniţă, D., Tarniţă, D., Bîzdoacă, N. G., Mîndrilă, I., & Vasilescu, M. (2009) · PubMed · Cited by 66
Ectopic bone formation in rats: the importance of the carrier
Hartman, E. H. M., Vehof, J. W. M., Spauwen, P. H. M., & Jansen, J. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.016 · Cited by 60
Alam, S., Ueki, K., Marukawa, K., Ohara, T., Hase, T., Takazakura, D., & Nakagawa, K. (2006) · Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology · doi:10.1016/j.tripleo.2006.01.019 · Cited by 58
Nadeau, M., Séguin, C., Theodoropoulos, J. S., & Harvey, E. J. (2020) · McGill Journal of Medicine · doi:10.26443/mjm.v10i1.462 · Cited by 54
Studies and applications of NiTi shape memory alloys in the medical field in China
Dai, K., & Chu, Y. (1996) · Bio-Medical Materials and Engineering · doi:10.3233/bme-1996-6402 · Cited by 54
A new porous titanium-nickel alloy: Part 1. Cytotoxicity and genotoxicity evaluation.
Assad, M., Chernyshov, A. V., Leroux, M. A., & Rivard, C. (2002) · PubMed · Cited by 53
Li, J., de Wijn, J. R., van Blitterswijk, C., & de Groot, K. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-4723-6 · Cited by 44
Bone tissue induction, using a COLLOSS®-filled titanium fibre mesh-scaffolding material
Walboomers, X. F., & Jansen, J. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.029 · Cited by 35
Chondroconductive potential of tantalum trabecular metal
Gordon, W. J., Conzemius, M. G., Birdsall, E., Wannemuehler, Y. M., Mallapragada, S. K., Lewallen, D. G., Yaszemski, M. J., & O’Driscoll, S. W. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30242 · Cited by 33
Faria, P. E. P., Carvalho, A. L., Felipucci, D. N. B., Wen, C., Sennerby, L., & Salata, L. A. (2008) · Clinical Implant Dentistry and Related Research · doi:10.1111/j.1708-8208.2008.00132.x · Cited by 30
Development of a Biologic Prosthetic Composite for Cartilage Repair
MARDONES, R. M., Reinholz, G. G., Fitzsimmons, J. S., Zobitz, M. E., An, K., Lewallen, D. G., Yaszemski, M. J., & O’Driscoll, S. W. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1368 · Cited by 28
Chen, F., Feng, X., Wu, W. T., Ouyang, H., Gao, Z., Cheng, X., Hou, R., & Mao, T. (2007) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2007.06.019 · Cited by 23
Canine Carpal Joint Fusion: A Model for Four-Corner Arthrodesis Using a Porous Tantalum Implant
Adams, J. E., Zobitz, M. E., Reach, J. S., An, K., Lewallen, D. G., & Steinmann, S. P. (2005) · The Journal Of Hand Surgery · doi:10.1016/j.jhsa.2005.08.008 · Cited by 20
Local computed tomography via iterative deblurring
Wang, G., Snyder, L., & Vanner, M. W. (1996) · Scanning · doi:10.1002/sca.4950180808 · Cited by 16
Mechanical properties of porous metal total hip prostheses.
Crowninshield, R. D. (1986) · PubMed · Cited by 10
Cited by
Biomimetic porous scaffolds for bone tissue engineering
Wu, S., Liu, X., Yeung, K. W. K., Liu, C., & Yang, X. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.04.001 · Cited by 1,159
Manufacturing and processing of NiTi implants: A review
Elahinia, M. H., Hashemi, M., Tabesh, M., & Bhaduri, S. B. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.11.001 · Cited by 1,067
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Biomaterials for bone tissue engineering scaffolds: a review
Qu, H., Fu, H., Han, Z., & Sun, Y. (2019) · RSC Advances · doi:10.1039/c9ra05214c · Cited by 827
Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., & Yeong, W. Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.094 · Cited by 514
Metadata
- Authors
- Alvarez, K., & Nakajima, H.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2009-07-23
- Volume
- 2
- Issue
- 3
- Pages
- 790-832
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2060193264
- Cited by
- 505
- References
- 109
- FWCI
- 4.08
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.