The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
The Life Cycle Assessment for Polylactic Acid (PLA) to Make It a Low-Carbon Material
Open accessAbstract
The massive plastic production worldwide leads to a global concern for the pollution made by the plastic wastes and the environmental issues associated with them. One of the best solutions is replacing the fossil-based plastics with bioplastics. Bioplastics such as polylactic acid (PLA) are biodegradable materials with less greenhouse gas (GHG) emissions. PLA is a biopolymer produced from natural resources with good mechanical and chemical properties, therefore, it is used widely in packaging, agriculture, and biomedical industries. PLA products mostly end up in landfills or composting. In this review paper, the existing life cycle assessments (LCA) for PLA were comprehensively reviewed and classified. According to the LCAs, the energy and materials used in the whole life cycle of PLA were reported. Finally, the GHG emissions of PLA in each stage of its life cycle, including feedstock acquisition and conversion, manufacturing of PLA products, the PLA applications, and the end of life (EoL) options, were described. The most energy-intensive stage in the life cycle of PLA is its conversion. By optimizing the conversion process of PLA, it is possible to make it a low-carbon material with less dependence on energy sources.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · cited 2×
“As can be seen in Table 1, there is a range for each property due to different types of PLA isomers, different used natural sources, and different production procedures [33].”
BackgroundProperties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
Zaaba, N. F., & Jaafar, M. (2020) · Polymer Engineering & Science · doi:10.1002/pen.25511 · Cited by 683
Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
Karamanlioglu, M., Preziosi, R., & Robson, G. D. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.009 · Cited by 636
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Life cycle assessment of bio-based and fossil-based plastic: A review
Walker, S., & Rothman, R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121158 · Cited by 480
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · Materials · doi:10.3390/ma10080952 · Cited by 447
Thermal and mechanical properties of chemical crosslinked polylactide (PLA)
Yang, S.-L., Wu, Z.-H., Yang, W., & Yang, M.-B. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.08.009 · Cited by 412
Bishop, G., Styles, D., & Lens, P. N. L. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105451 · Cited by 401
A Brief History of Marine Litter Research
Ryan, P. G. (2015) · Marine Anthropogenic Litter · doi:10.1007/978-3-319-16510-3_1 · Cited by 316
Roy, S., & Rhim, J.-W. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.08.094 · Cited by 311
Madival, S., Auras, R., Singh, S. P., & Narayan, R. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.03.015 · Cited by 298
Cosate de Andrade, M. F., Souza, P. M. S., Cavalett, O., & Morales, A. R. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0787-2 · Cited by 275
Benavides, P. T., Lee, U., & Zarè-Mehrjerdi, O. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124010 · Cited by 274
Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ™ Polylactide Production
Vink, E. T. H., & Davies, S. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0003 · Cited by 256
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Biopolymer production and end of life comparisons using life cycle assessment
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.03.002 · Cited by 255
Papong, S., Malakul, P., Trungkavashirakun, R., Wenunun, P., Chom-in, T., Nithitanakul, M., & Sarobol, E. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.09.030 · Cited by 250
Biomedical Applications of Poly(Lactic Acid)
P. Pawar, R., U. Tekale, S., U. Shisodia, S., T. Totre, J., & J. Domb, A. (2014) · Recent Patents on Regenerative Medicine · doi:10.2174/2210296504666140402235024 · Cited by 248
Life Cycle Impact Assessment of Polylactic Acid (PLA) Produced from Sugarcane in Thailand
Morão, A., & de Bie, F. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01525-9 · Cited by 240
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Improvement of thermal behaviors of biodegradable poly(lactic acid) polymer: A review
Jin, F.-L., Hu, R.-R., & Park, S.-J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.078 · Cited by 233
Zhao, P., Rao, C., Gu, F., Sharmin, N., & Fu, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.275 · Cited by 224
Life cycle assessment of recycling options for polylactic acid
Maga, D., Hiebel, M., & Thonemann, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.05.018 · Cited by 211
Rossi, V., Cleeve-Edwards, N., Lundquist, L., Schenker, U., Dubois, C., Humbert, S., & Jolliet, O. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.08.049 · Cited by 209
Antimicrobial poly(lactic acid)/cellulose bionanocomposite for food packaging application: A review
Gan, I., & Chow, W. S. (2018) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2018.06.012 · Cited by 191
Drug carriers in biology and medicine
Gregoriadis, G. (1979) · Academic Press eBooks · Cited by 186
Mehrabi Mazidi, M., Edalat, A., Berahman, R., & Hosseini, F. S. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00557 · Cited by 170
Foroughi, F., Ghomi, E. R., Dehaghi, F. M., Borayek, R., & Ramakrishna, S. (2021) · Materials · doi:10.3390/ma14040714 · Cited by 163
Self-citationThe role of three-dimensional printing in healthcare and medicine
Kholgh Eshkalak, S., Rezvani Ghomi, E., Dai, Y., Choudhury, D., & Ramakrishna, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108940 · Cited by 162
Self-citationBenavides, P. T., Dunn, J. B., Han, J., Biddy, M., & Markham, J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00750 · Cited by 161
Future of additive manufacturing in healthcare
Rezvani Ghomi, E., Khosravi, F., Neisiany, R. E., Singh, S., & Ramakrishna, S. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.100255 · Cited by 161
Self-citationBioplastic Wastes: The Best Final Disposition for Energy Saving
Piemonte, V. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0343-z · Cited by 150
State of art review on Life Cycle Assessment of polymers
Ramesh, P., & Vinodh, S. (2020) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2020.1802623 · Cited by 150
Scaffaro, R., Botta, L., Maio, A., & Gallo, G. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.10.058 · Cited by 140
Mallet, B., Lamnawar, K., & Maazouz, A. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23610 · Cited by 138
Changes of physical properties of PLA-based blends during early stage of biodegradation in compost
Sedničková, M., Pekařová, S., Kucharczyk, P., Bočkaj, J., Janigová, I., Kleinová, A., Mošková, D. J., Omaníková, L., Perďochová, D., Koutný, M., et al. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.078 · Cited by 135
Khosravi, A., Fereidoon, A., Khorasani, M. M., Naderi, G., Saeb, M. R., Zarrintaj, P., Saeb, M. R., & Gutiérrez, T. J. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100429 · Cited by 133
Catalytic chemical recycling of biodegradable polyesters
Féghali, E., Tauk, L., Ortiz, P. A., Vanbroekhoven, K., & Eevers, W. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109241 · Cited by 131
A Comparative Life Cycle Assessment of Meat Trays Made of Various Packaging Materials
Maga, D., Hiebel, M., & Aryan, V. (2019) · Sustainability · doi:10.3390/su11195324 · Cited by 121
Carbon Footprint of Packaging Films Made from LDPE, PLA, and PLA/PBAT Blends in South Korea
Choi, B., Yoo, S., & Park, S. (2018) · Sustainability · doi:10.3390/su10072369 · Cited by 115
Wang, X., Pan, Y., Yuan, H., Su, M., Shao, C., Liu, C., Guo, Z., Shen, C., & Liu, X. (2019) · Chinese Chemical Letters · doi:10.1016/j.cclet.2019.07.044 · Cited by 115
Suwanmanee, U., Varabuntoonvit, V., Chaiwutthinan, P., Tajan, M., Mungcharoen, T., & Leejarkpai, T. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0479-7 · Cited by 111
Lorite, G. S., Rocha, J. M., Miilumäki, N., Saavalainen, P., Selkälä, T., Morales‐Cid, G., Gonçalves, M. P., Pongrácz, É., Rocha, C. M. R., & Tóth, G. (2016) · LWT · doi:10.1016/j.lwt.2016.09.004 · Cited by 107
Penadés-Plà, V., Martí, J. V., García-Segura, T., & Yepes, V. (2017) · Sustainability · doi:10.3390/su9101864 · Cited by 91
Blanco, I., Ingrao, C., & Siracusa, V. (2020) · Polymers · doi:10.3390/polym12061212 · Cited by 84
Correa‐Pacheco, Z. N., Solis, J. B., Gudiño, P. O., Sabino, M. A., Benitez, J. J., Barajas-Cervantes, A., Bautista‐Baños, S., & Colmenares, L. B. H. (2019) · Polymers · doi:10.3390/polym12010038 · Cited by 81
Life Cycle Assessment of Bottled Water: A Case Study of Green2O Products
Horowitz, N., Frago, J., & Mu, D. (2018) · Waste Management · doi:10.1016/j.wasman.2018.02.043 · Cited by 80
Benetto, E., Jury, C., Igos, E., Carton, J., Hild, P., Vergne, C., & Martino, J. D. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.056 · Cited by 79
Chitaka, T. Y., Russo, V., & von Blottnitz, H. (2020) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-020-01786-w · Cited by 73
Mahalle, L., Alemdar, A., Mihai, M., & Legros, N. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-014-0731-4 · Cited by 72
Haylock, R., & Rosentrater, K. A. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1041-2 · Cited by 71
Rodríguez, L. J., Fabbri, S., Orrego, C. E., & Owsianiak, M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110493 · Cited by 71
Nitkiewicz, T., Wojnarowska, M., Sołtysik, M., Kaczmarski, A., Witko, T., Ingrao, C., & Guzik, M. W. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141279 · Cited by 70
Rojas‐Bringas, P. M., De-la-Torre, G. E., & Torres, F. G. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144869 · Cited by 68
The Impact of Biodegradable Plastics in the Properties of Recycled Polyethylene Terephthalate
Aldás, M., Pavón, C., de la Rosa‐Ramírez, H., Ferri, J. M., Bertomeu, D., Samper, M. D., & López, J. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02073-x · Cited by 61
Lim, J. S., Park, K.-I., Chung, G. S., & Kim, J. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.01.030 · Cited by 58
Biobased Economy and Climate Change—Important Links, Pitfalls, and Opportunities
Carus, M. (2017) · Industrial Biotechnology · doi:10.1089/ind.2017.29073.mca · Cited by 55
Wan, L., & Zhang, Y. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.08.016 · Cited by 55
The Effect of Poly (Ethylene glycol) Emulation on the Degradation of PLA/Starch Composites
Momeni, S., Ghomi, E. R., Shakiba, M., Navid, S. S., Abdouss, M., Bigham, A., Khosravi, F., Ahmadi, Z., Faraji, M., Abdouss, H., et al. (2021) · Polymers · doi:10.3390/polym13071019 · Cited by 54
Self-citationLüedtke, J., Gaugler, M., Grigsby, W. J., & Krause, A. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.10.069 · Cited by 49
Jaszkiewicz, A., Bledzki, A. K., van der Meer, R., Franciszczak, P., & Meljon, A. (2014) · Polymer Bulletin · doi:10.1007/s00289-014-1148-8 · Cited by 45
Bałdowska-Witos, P., Piotrowska, K., Kruszelnicka, W., Błaszczak, M., Tomporowski, A., Opielak, M., Kasner, R., & Flizikowski, J. (2020) · Polymers · doi:10.3390/polym12061320 · Cited by 43
Circular Economy: a Comparison Between the Case of Singapore and France
Ghomi, E. R., Khosravi, F., Tahavori, M. A., & Ramakrishna, S. (2021) · Materials Circular Economy · doi:10.1007/s42824-020-00016-w · Cited by 42
Self-citationEnvironmental Impact Assessment of Polylactide(PLA)/Chicken Feathers Biocomposite Materials
Durán, G. M., del Castillo, M. D. Á., Soriano, N. G., Macanás, J., & Carrillo, F. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0982-9 · Cited by 41
Bałdowska-Witos, P., Kruszelnicka, W., Kasner, R., Tomporowski, A., Flizikowski, J., Kłos, Z., Piotrowska, K., & Markowska, K. (2020) · Polymers · doi:10.3390/polym12020388 · Cited by 41
Tsuji, H., & Kondoh, F. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.05.016 · Cited by 36
Influence of time and room temperature on mechanical and thermal degradation of poly(lactic) acid
Karamanlioglu, M., & Alkan, Ü. (2019) · Thermal Science · doi:10.2298/tsci181111051k · Cited by 24
Meng, Q.-K., Heuzey, M., & Carreau, P. J. (2012) · International Polymer Processing · doi:10.3139/217.2647 · Cited by 23
Pavezi, K. J. P., Rocha, A., Bonafé, E. G., & Martins, A. F. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114448 · Cited by 23
Cited by
Bioplastic production in terms of life cycle assessment: A state-of-the-art review
Ali, S. S., Abdelkarim, E. A., Elsamahy, T., Al-Tohamy, R., Li, F., Kornaros, M., Zuorro, A., Zhu, D., & Sun, J. (2023) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2023.100254 · Cited by 361
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
Licea-Saucedo, D. C., Rodrigue, D., Cisneros-López, E. O., & González-Núñez, R. (2023) · Journal of Plastic Film & Sheeting · doi:10.1177/87560879231153702 · Cited by 9
Metadata
- Authors
- Rezvani Ghomi, E. R., Khosravi, F., Saedi Ardahaei, A. S., Dai, Y., Neisiany, R. E., Foroughi, F., Wu, M., Das, O., & Ramakrishna, S.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-06-02
- Volume
- 13
- Issue
- 11
- Pages
- 1854
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3171586889
- Cited by
- 295
- References
- 78
- FWCI
- 8.02
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.