The DOI matches its Crossref record; 146 of the 146 references it cites were found in a registry or an index.
Poly-l-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications
Open accessAbstract
Synthetic biopolymers are effective cues to replace damaged tissue in the tissue engineering (TE) field, both for in vitro and in vivo application. Among them, poly-l-lactic acid (PLLA) has been highlighted as a biomaterial with tunable mechanical properties and biodegradability that allows for the fabrication of porous scaffolds with different micro/nanostructures via various approaches. In this review, we discuss the structure of PLLA, its main properties, and the most recent advances in overcoming its hydrophobic, synthetic nature, which limits biological signaling and protein absorption. With this aim, PLLA-based scaffolds can be exposed to surface modification or combined with other biomaterials, such as natural or synthetic polymers and bioceramics. Further, various fabrication technologies, such as phase separation, electrospinning, and 3D printing, of PLLA-based scaffolds are scrutinized along with the in vitro and in vivo applications employed in various tissue repair strategies. Overall, this review focuses on the properties and applications of PLLA in the TE field, finally affording an insight into future directions and challenges to address an effective improvement of scaffold properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
Scaffolds and cells for tissue regeneration: different scaffold pore sizes—different cell effects
Bružauskaitė, I., Bironaitė, D., Bagdonas, E., & Bernotienė, E. (2016) · Cytotechnology · doi:10.1007/s10616-015-9895-4 · Cited by 797
Khorshidi, S., Solouk, A., Mirzadeh, H., Mazinani, S., Lagaron, J. M., Sharifi, S., & Ramakrishna, S. (2016) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1978 · Cited by 546
A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications
Casalini, T., Rossi, F., Castrovinci, A., & Perale, G. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00259 · Cited by 500
Hydrolytic Degradation and Erosion of Polyester Biomaterials
Woodard, L. N., & Grunlan, M. A. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00424 · Cited by 477
PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications
Siddiqui, N., Asawa, S., Birru, B., Baadhe, R., & Rao, S. (2018) · Molecular Biotechnology · doi:10.1007/s12033-018-0084-5 · Cited by 461
Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer
Gregor, A., Filová, E., Novák, M., Kronek, J., Chlup, H., Buzgo, M., Blahnová, V., Lukášová, V., Bartoš, M., Nečas, A., et al. (2017) · Journal of Biological Engineering · doi:10.1186/s13036-017-0074-3 · Cited by 406
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 325
Tissue Engineering: Toward a New Era of Medicine
Shafiee, A., & Atala, A. (2017) · Annual Review of Medicine · doi:10.1146/annurev-med-102715-092331 · Cited by 296
Poly(Vinyl Alcohol)-Based Nanofibrous Electrospun Scaffolds for Tissue Engineering Applications
Teixeira, M. A., Amorim, M. T. P., & Felgueiras, H. P. (2019) · Polymers · doi:10.3390/polym12010007 · Cited by 287
Cross-Linking Strategies for Electrospun Gelatin Scaffolds
Campiglio, C. E., Contessi Negrini, N., Farè, S., & Draghi, L. (2019) · Materials · doi:10.3390/ma12152476 · Cited by 277
The minor collagens in articular cartilage
Luo, Y., Sinkeviciute, D., He, Y., Karsdal, M., Henrotin, Y., Mobasheri, A., Önnerfjord, P., & Bay-Jensen, A. (2017) · Protein & Cell · doi:10.1007/s13238-017-0377-7 · Cited by 261
Fabrication of scaffolds in tissue engineering: A review
Zhao, P., Gu, H., Mi, H., Rao, C., Fu, J., & Turng, L.-S. (2018) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0496-8 · Cited by 246
Gupte, M. J., Swanson, W. B., Hu, J., Jin, X., Ma, H., Zhang, Z., Liu, Z., Feng, K., Feng, G., Xiao, G., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.016 · Cited by 243
Review: Polymeric-Based 3D Printing for Tissue Engineering
Wu, G.-H., & Hsu, S.-H. (2015) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-015-0038-3 · Cited by 239
BIODEGRADABLE POLY-EPSILON-CAPROLACTONE (PCL) FOR TISSUE ENGINEERING APPLICATIONS: A REVIEW
Abedalwafa, M. A., Wang, F., Wang, L., & Li, C. (2012) · Cited by 238
Maji, K., Dasgupta, S., Pramanik, K., & Bissoyi, A. (2016) · International Journal of Biomaterials · doi:10.1155/2016/9825659 · Cited by 224
Advanced fabrication for electrospun three-dimensional nanofiber aerogels and scaffolds
Chen, Y., Shafiq, M., Liu, M., Morsi, Y., & Mo, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.06.023 · Cited by 224
Sultana, A., Ghosh, S. K., Sencadas, V., Zheng, T., Higgins, M. J., Middya, T. R., & Mandal, D. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01439b · Cited by 178
Donate, R., Monzón, M., & Alemán-Domínguez, M. E. (2020) · e-Polymers · doi:10.1515/epoly-2020-0046 · Cited by 173
Zeinali, R., del Valle, L. J., Torras, J., & Puiggalí, J. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22073504 · Cited by 161
Exquisite design of injectable Hydrogels in Cartilage Repair
Wu, J., Chen, Q., Deng, C., Xu, B., Zhang, Z., Yang, Y., & Lu, T. (2020) · Theranostics · doi:10.7150/thno.46450 · Cited by 154
Hochleitner, G., Chen, F., Blum, C., Dalton, P. D., Amsden, B. G., & Gröll, J. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.023 · Cited by 146
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143
Growth Factor and Its Polymer Scaffold-Based Delivery System for Cartilage Tissue Engineering
Chen, L., Liu, J., Guan, M., Zhou, T., Duan, X., & Xiang, Z. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s249829 · Cited by 141
Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships
Scaffaro, R., Lopresti, F., Maio, A., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.11.005 · Cited by 132
Self-citationMamidi, N., & Delgadillo, R. M. V. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111819 · Cited by 125
Mechanical behavior of polymer-based vs. metallic-based bioresorbable stents
Ang, H. Y., Huang, Y., Lim, S. T., Wong, P. E. H., Joner, M., & Foin, N. (2017) · Journal of Thoracic Disease · doi:10.21037/jtd.2017.06.30 · Cited by 124
Scaffolds for the repair of bone defects in clinical studies: a systematic review
Zeng, J., Liu, S., Xiong, L., Qiu, P., Ding, L., Xiong, S., Li, J.-T., Liao, X., & Tang, Z. (2018) · Journal of Orthopaedic Surgery and Research · doi:10.1186/s13018-018-0724-2 · Cited by 123
Carrow, J. K., Kerativitayanan, P., Jaiswal, M. K., Lokhande, G. K., & Gaharwar, A. K. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00013-x · Cited by 122
Effects of plasma treatment to nanofibers on initial cell adhesion and cell morphology
Liu, W., Zhan, J., Su, Y., Wu, T. S., Wu, C., Ramakrishna, S., Mo, X., Al-Deyab, S. S., & El-Newehy, M. H. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.08.031 · Cited by 121
Zhang, Z., Gupte, M. J., Jin, X., & Ma, P. X. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201402618 · Cited by 119
Dinarvand, P., Seyedjafari, E., Shafiee, A., Jandaghi, A. B., Doostmohammadi, A., Fathi, M. H., Farhadian, S., & Soleimani, M. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201212u · Cited by 118
Wang, X., Tolba, E., Schröder, H. C., Neufurth, M., Feng, Q., Diehl‐Seifert, B., & Müller, W. E. G. (2014) · PLoS ONE · doi:10.1371/journal.pone.0112497 · Cited by 114
Scaffaro, R., Lopresti, F., & Botta, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.09.016 · Cited by 111
Self-citationAdvances in the Fabrication of Scaffold and 3D Printing of Biomimetic Bone Graft
Bisht, B., Hope, A., Mukherjee, A., & Paul, M. K. (2021) · Annals of Biomedical Engineering · doi:10.1007/s10439-021-02752-9 · Cited by 111
Mamidi, N., Elı́as-Zúñiga, A., & Castrejon, J. V. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110928 · Cited by 109
Ju, J., Peng, X., Huang, K., Li, L., Liu, X., Chitrakar, C., Chang, L., Gu, Z., & Kuang, T. (2019) · Polymer · doi:10.1016/j.polymer.2019.121707 · Cited by 108
Singh, D., Babbar, A., Jain, V., Gupta, D., Saxena, S., & Dwibedi, V. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-1625-y · Cited by 107
Pavia, F. C., Carrubba, V. L., Piccarolo, S., & Brucato, V. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31621 · Cited by 106
Capuana, E., Lopresti, F., Pavia, F. C., Brucato, V., & Carrubba, V. L. (2021) · Polymers · doi:10.3390/polym13132041 · Cited by 103
Self-citationVascular tissue engineering: biodegradable scaffold platforms to promote angiogenesis
Serbo, J. V., & Gerecht, S. (2013) · Stem Cell Research & Therapy · doi:10.1186/scrt156 · Cited by 102
The journey of multifunctional bone scaffolds fabricated from traditional toward modern techniques
Bigham, A., Foroughi, F., Ghomi, E. R., Rafienia, M., Neisiany, R. E., & Ramakrishna, S. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00094-4 · Cited by 101
Mamidi, N., Delgadillo, R. M. V., & Barrera, E. V. (2021) · Pharmaceuticals · doi:10.3390/ph14040291 · Cited by 101
Rajzer, I., Kurowska, A., Jabłoński, A., Jatteau, S., Śliwka, M., Ziąbka, M., & Menaszek, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.012 · Cited by 100
Polymer-based hydrogel scaffolds for skin tissue engineering applications: a mini-review
Jeong, K.-H., Park, D., & Lee, Y. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1278-4 · Cited by 98
Influence of the Rigid Amorphous Fraction and Crystallinity on Polylactide Transport Properties
Sangroniz, A., Chaos, A., Iriarte, M., del Río, J., Sarasua, J.-R., & Etxeberria, A. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00833 · Cited by 98
Mariano, M., Pilate, F., de Oliveira, F. B., Khelifa, F., Dúbois, P., Raquez, J., & Dufresne, A. (2017) · ACS Omega · doi:10.1021/acsomega.7b00387 · Cited by 90
Manufacture and Characterisation of Porous PLA Scaffolds
Rodrigues, N., Benning, M., Ferreira, A. M., Dixon, L. I., & Dalgarno, K. W. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.07.025 · Cited by 88
Lu, H., Oh, H. H., Kawazoe, N., Yamagishi, K., & Chen, G. (2012) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/13/6/064210 · Cited by 86
Mamidi, N., González-Ortiz, A., Romo‐López, I., & Barrera, E. V. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11120621 · Cited by 84
Park, S. A., Lee, S. J., Seok, J. M., Lee, J. H., Kim, W. D., & Kwon, I. K. (2018) · Journal of Bionic Engineering · doi:10.1007/s42235-018-0034-8 · Cited by 83
Javanmard, S. H., Anari, J., Kharazi, A. Z., & Vatankhah, E. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216652068 · Cited by 81
Effects of mechanical loading on human mesenchymal stem cells for cartilage tissue engineering
Choi, J. R., Yong, K. W., & Choi, J. Y. (2017) · Journal of Cellular Physiology · doi:10.1002/jcp.26018 · Cited by 81
Zhu, L., Chen, S., Liu, K., Wen, W., Lu, L., Ding, S., Zhou, C., & Luo, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123524 · Cited by 81
Engineering of carbon nano-onion bioconjugates for biomedical applications
Mamidi, N., Delgadillo, R. M. V., & González-Ortiz, A. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111698 · Cited by 80
Fabrication of piezoelectric poly(l-lactic acid)/BaTiO3 fibre by the melt-spinning process
Oh, H., Kim, D.-K., Choi, Y.-C., Lim, S.-J., Jeong, J., Ko, J., Hahm, W., Kim, S.-W., Lee, Y.-J., Kim, H., et al. (2020) · Scientific Reports · doi:10.1038/s41598-020-73261-3 · Cited by 79
Applications of Nanobiotechnology
Stoytcheva, M., & Zlatev, R. K. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.82976 · Cited by 78
Integration of PCL and PLA in a monolithic porous scaffold for interface tissue engineering
Scaffaro, R., Lopresti, F., Botta, L., et al. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.06.021 · Cited by 77
Self-citationMeng, J., Boschetto, F., Yagi, S., Marin, E., Adachi, T., Chen, X.-F., Pezzotti, G., Sakurai, S., Yamane, H., & Xu, H. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110063 · Cited by 73
Morphology and performance control of PLLA-based porous membranes by phase separation
Xing, Q., Dong, X., Li, R., Yang, H., Han, C. C.-C., & Wang, D. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.007 · Cited by 69
Salehi, M., Farzamfar, S., Bastami, F., & Tajerian, R. (2016) · Biomedical Engineering Applications Basis and Communications · doi:10.4015/s1016237216500356 · Cited by 67
Szustakiewicz, K., Gazińska, M. A., Kryszak, B., Grzymajło, M., Pigłowski, J., Wiglusz, R. J., & Okamoto, M. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.01.073 · Cited by 65
Zhang, K., Huang, D., Yan, Z., & Wang, C. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36053 · Cited by 62
PLLA-PHB fiber membranes obtained by solvent-free electrospinning for short-time drug delivery
Cao, K., Liu, Y., Olkhov, A. A., Siracusa, V., & Иорданский, А. Л. (2017) · Drug Delivery and Translational Research · doi:10.1007/s13346-017-0463-7 · Cited by 60
Pavia, F. C., Conoscenti, G., Greco, S., Carrubba, V. L., Ghersi, G., & Brucato, V. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.08.007 · Cited by 60
Mamidi, N., Castrejon, J. V., & González-Ortiz, A. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103696 · Cited by 60
Effects of hydroxyapatite filler on long-term hydrolytic degradation of PLLA/PCL porous scaffolds
Ródenas‐Rochina, J., Vidaurre, A., Cortázar, I. C., & Lebourg, M. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.04.015 · Cited by 59
Effects of designed PLLA and 50:50 PLGA scaffold architectures on bone formation in vivo
Saito, E., Liao, E. E., Hu, W., Krebsbach, P. H., & Hollister, S. J. (2011) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.497 · Cited by 58
Material Characterization of PCL:PLLA Electrospun Fibers Following Six Months Degradation In Vitro
Shamsah, A. H., Cartmell, S. H., Richardson, S. M., & Bosworth, L. A. (2020) · Polymers · doi:10.3390/polym12030700 · Cited by 58
Huang, Q., Liu, Y., Ouyang, Z., & Feng, Q. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.06.018 · Cited by 57
Degradable Three Dimensional-Printed Polylactic Acid Scaffold with Long-Term Antibacterial Activity
Li, X., Wang, Y., Guo, M., Wang, Z., Shao, N., Zhang, P., Chen, X., & Huang, Y. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03464 · Cited by 55
Ghorbani, F., Zamanian, A., & Nojehdehian, H. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.175 · Cited by 54
Pore size regulates mesenchymal stem cell response to Bioglass-loaded composite scaffolds
Vissers, C. A. B., Harvestine, J. N., & Leach, J. K. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00947b · Cited by 53
Melt Processed PCL/PEG Scaffold With Discrete Pore Size Gradient for Selective Cellular Infiltration
Scaffaro, R., Lopresti, F., Botta, L., Rigogliuso, S., & Ghersi, G. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500289 · Cited by 53
Self-citationMicrostructure and properties of nano-fibrous PCL-b-PLLA scaffolds for cartilage tissue engineering
Li, H., Liu, B., Xipeng, G., Xie, G., Liao, S., Quan, D., Cai, D., Lu, J., & Ramakrishna, S. (2009) · European Cells and Materials · doi:10.22203/ecm.v018a06 · Cited by 53
Ciapetti, G., Granchi, D., Devescovi, V., Baglio, S. R., Leonardi, E., Martini, D., Jurado, M. J., Olalde, B., Armentano, I., Kenny, J. M., et al. (2012) · International Journal of Molecular Sciences · doi:10.3390/ijms13022439 · Cited by 50
Neumann, I., Flores‐Sahagun, T. H. S., & Ribeiro, A. M. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.013 · Cited by 50
Mamidi, N., Delgadillo, R. M. V., & Castrejon, J. V. (2021) · Environmental Science Nano · doi:10.1039/d1en00354b · Cited by 50
Pisanti, P., Yeatts, A. B., Cardea, S., Fisher, J. P., & Reverchon, E. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34191 · Cited by 49
Poly-L-lactic Acid (PLLA)-Chitosan-Collagen Electrospun Tube for Vascular Graft Application
Fiqrianti, I. A., Widiyanti, P., Manaf, M. A., Savira, C. Y., Cahyani, N. R., & Bella, F. R. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9020032 · Cited by 49
Wu, H., Lei, P., Liu, G., Zhang, Y. S., Yang, J., Zhang, L., Xie, J., Niu, W., Liu, H., Ruan, J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00506-z · Cited by 48
Lopresti, F., Pavia, F. C., Ceraulo, M., Capuana, E., Brucato, V., Ghersi, G., Botta, L., & Carrubba, V. L. (2021) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37199 · Cited by 46
Self-citationCarrubba, V. L., Pavia, F. C., Brucato, V., & Piccarolo, S. (2008) · International Journal of Material Forming · doi:10.1007/s12289-008-0332-5 · Cited by 45
ECM Decorated Electrospun Nanofiber for Improving Bone Tissue Regeneration
Fu, Y., Liu, L., Cheng, R., & Cui, W. (2018) · Polymers · doi:10.3390/polym10030272 · Cited by 45
Chuaponpat, N., Ueda, T., Ishigami, A., Kurose, T., & Itô, H. (2020) · Polymers · doi:10.3390/polym12051083 · Cited by 43
Niu, Y., Guo, L., Liu, J., Shen, H., Su, J., An, X., Yu, B., Wei, J., Shin, J., Guo, H., et al. (2015) · Journal of Materials Chemistry B · doi:10.1039/c4tb01796j · Cited by 42
Rainer, A., Spadaccio, C., Sedati, P., Marco, F. D., Carotti, S., Lusini, M., Vadalà, G., Martino, A. C. D., Morini, S., Chello, M., et al. (2011) · Annals of Biomedical Engineering · doi:10.1007/s10439-011-0289-2 · Cited by 40
Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication
Shivalkar, S., & Singh, S. (2017) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0002-5 · Cited by 40
Fabrication of highly porous biodegradable biomimetic nanocomposite as advanced bone tissue scaffold
Abdal‐hay, A., Khalil, K. A., Hamdy, A. S., & Aljassir, F. F. (2016) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2016.09.021 · Cited by 39
Kang, E. Y., Lih, E., Kim, I. H., Joung, Y. K., & Han, D. K. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0054-6 · Cited by 38
Biodegradable Polymer Scaffold for Tissue Engineering
Tateishi, T., & Chen, G. (2005) · Key engineering materials · doi:10.4028/www.scientific.net/kem.288-289.59 · Cited by 38
Wang, W., Nie, W., Liu, D., Du, H., Zhou, X., Chen, L., Wang, H., Mo, X., Li, L., & He, C. (2018) · International Journal of Nanomedicine · doi:10.2147/ijn.s183463 · Cited by 38
Lin, S., Dong, P., Zhou, C., Dallan, L. A. P., Zimin, V. N., Pereira, G. T. R., Lee, J., Gharaibeh, Y., Wilson, D. L., Bezerra, H. G., et al. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0093 · Cited by 38
Electrospun fibrous silk fibroin/poly(L-lactic acid) scaffold for cartilage tissue engineering
Liu, W., Li, Z., Zheng, L., Zhang, X., Liu, P., Yang, T., & Han, B. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-9099-9 · Cited by 37
Naseem, R., Zhao, L., Liu, Y., & Silberschmidt, V. V. (2017) · Mechanics of Advanced Materials and Modern Processes · doi:10.1186/s40759-017-0028-y · Cited by 37
Conoscenti, G., Pavia, F. C., Ciraldo, F. E., Liverani, L., Brucato, V., Carrubba, V. L., & Boccaccini, A. R. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1743-9 · Cited by 36
Wang, J., Zhan, L., Zhang, X., Wu, R., Liao, L., & Wei, J. (2020) · Frontiers in Pharmacology · doi:10.3389/fphar.2020.00431 · Cited by 36
Namini, M. S., Bayat, N., Tajerian, R., Ebrahimi‐Barough, S., Azami, M., Irani, S., Jangjoo, S., Shirian, S., & Ai, J. (2018) · Journal of Orthopaedic Surgery and Research · doi:10.1186/s13018-018-0754-9 · Cited by 35
Huang, W., Hibino, T., Suye, S., & Fujita, S. (2021) · RSC Advances · doi:10.1039/d0ra08353d · Cited by 35
Kang, H., Dong, J., Liu, Z., Zhang, S., Liu, F., Li, F., & Yan, G. (2021) · Nanomaterials · doi:10.3390/nano11123215 · Cited by 35
Mashhadikhan, M., Soleimani, M., Parivar, K., & Yaghmaei, P. (2015) · PubMed Central · Cited by 34
Poly Lactic Acid Based Scaffolds for Vascular Tissue Engineering
Pavia, F. C., Rigogliuso, S., Carrubba, V. L., et al. (2012) · Chemical engineering transactions · doi:10.3303/cet1227069 · Cited by 33
Zhang, B., Bian, X., Xiang, S., Li, G., & Chen, X. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.11.022 · Cited by 32
PLLA scaffolds with controlled architecture as potential microenvironment for in vitro tumor model
Lombardo, M. E., Pavia, F. C., Vitrano, I., Ghersi, G., Brucato, V., Rosei, F., & Carrubba, V. L. (2019) · Tissue and Cell · doi:10.1016/j.tice.2019.04.004 · Cited by 31
Growth factor loading on aliphatic polyester scaffolds
Shen, H., & Hu, X. (2021) · RSC Advances · doi:10.1039/d0ra10232f · Cited by 31
Bahçecioğlu, G., Hasırcı, N., & Hasırcı, V. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa77f · Cited by 30
Girija, A. R., Palaninathan, V., Strudwick, X. L., Balasubramanian, S., Nair, S. D., & Cowin, A. J. (2020) · RSC Advances · doi:10.1039/d0ra04648e · Cited by 30
Cruz, F. (2010) · Biopolymers · doi:10.5772/10264 · Cited by 28
Yang, Z., Song, Z., Nie, X., Guo, K., & Gu, Y. (2020) · Stem Cell Research & Therapy · doi:10.1186/s13287-020-02042-6 · Cited by 28
Pavia, F. C., Carrubba, V. L., & Brucato, V. (2012) · Polymer Bulletin · doi:10.1007/s00289-012-0861-4 · Cited by 27
Yin, A., Bowlin, G. L., Luo, R., Zhang, X., Wang, Y., & Mo, X. (2016) · Regenerative Biomaterials · doi:10.1093/rb/rbw026 · Cited by 27
Ahmadi, M., Seyedjafari, E., Zargar, S. J., Birhanu, G., Zandi‐Karimi, A., Beiki, B., & Tuzlakoğlu, K. (2017) · EXCLI journal · doi:10.17179/excli2016-741 · Cited by 26
PLLA Porous Microsphere-Reinforced Silk-Based Scaffolds for Auricular Cartilage Regeneration
Zeng, Y., Li, X., Liu, X., Yang, Y., Zhou, Z., Fan, J., & Jiang, H. (2021) · ACS Omega · doi:10.1021/acsomega.0c05890 · Cited by 25
Research into biodegradable polymeric stents: a review of experimental and modelling work
Qiu, T., & Zhao, L. (2018) · Vessel Plus · doi:10.20517/2574-1209.2018.13 · Cited by 24
Pavia, F. C., Palumbo, F. S., Carrubba, V. L., Bongiovì, F., Brucato, V., Pitarresi, G. L., & Giammona, G. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.040 · Cited by 23
Evaluation of poly(L-lactide) and chitosan composite scaffolds for cartilage tissue regeneration
Mallick, S. P., Pal, K., Rastogi, A., & Srivastava, P. (2016) · Designed Monomers & Polymers · doi:10.1080/15685551.2015.1136535 · Cited by 22
Baimark, Y., Pasee, S., Rungseesantivanon, W., & Prakymoramas, N. (2019) · Journal of Polymer Research · doi:10.1007/s10965-019-1881-7 · Cited by 22
Teng, L., Nie, W., Zhou, Y., Song, L., & Chen, P. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42213 · Cited by 20
Ge, M., Li, X., Nie, T., Ma, H., & Zhang, J. (2016) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2016.1229901 · Cited by 20
Kim, S. J., Lee, J., Hwang, M. P., Wang, Y., & Kim, K. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.06.044 · Cited by 20
Ramesh, B., Cherian, K. M., & Fakoya, A. O. J. (2019) · Methods in molecular biology · doi:10.1007/7651_2019_213 · Cited by 19
Lopresti, F., Keraite, I., Ongaro, A. E., Howarth, N. M., Carrubba, V. L., & Kersaudy-Kerhoas, M. (2021) · Membranes · doi:10.3390/membranes11090680 · Cited by 18
Self-citationTuning of biodegradation rate of PLLA scaffolds via blending with PLA
Pavia, F. C., Carrubba, V. L., & Brucato, V. (2009) · International Journal of Material Forming · doi:10.1007/s12289-009-0574-x · Cited by 17
Weng, W., Song, S., Cao, L., Chen, X., Cai, Y., Li, H., Zhou, Q., Zhang, J., & Su, J. (2014) · Journal of Nanomaterials · doi:10.1155/2014/935149 · Cited by 17
Mahboudi, H., Hosseini, F. S., Kehtari, M., Hassannia, H., Enderami, S. E., & Nojehdehi, S. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2019.1600516 · Cited by 17
Zhang, Y., Li, F., Yu, Q., Ni, C., Gu, X., Li, Y., & You, J. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900316 · Cited by 17
He, X., Kawazoe, N., & Chen, G. (2014) · BioMed Research International · doi:10.1155/2014/106082 · Cited by 15
He, R., Wang, K., Ren, J., Zhang, W., Wang, Z., Deng, K., Shi, Y., Luo, Y., Yuan, Y., Xu, T., et al. (2019) · Materials Technology · doi:10.1080/10667857.2019.1709286 · Cited by 15
Melo, P., Naseem, R., Corvaglia, I., Montalbano, G., Pontremoli, C., Azevedo, A., Quadros, P. A., Gentile, P., Ferreira, A. M., Dalgarno, K. W., et al. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.601645 · Cited by 15
Choi, J. W., Kim, Y. S., Park, J. K., Song, E. H., Park, J. H., Kim, M. S., Shin, Y. S., & Kim, C. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600163 · Cited by 14
Sohn, D. G., Hong, M. W., Kim, Y., & Cho, Y. (2015) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(14)60146-3 · Cited by 13
Pavia, F., Dibella, M., Brucato, V., Blanda, V., Zummo, F., Vitrano, I., Liegro, C. D., Ghersi, G., Diliegro, I., & Schiera, G. (2019) · Molecular Medicine Reports · doi:10.3892/mmr.2019.10351 · Cited by 13
Development of injectable and durable kefiran hydro-alcoholic gels
Sabatino, M. A., Pavia, F. C., Rigogliuso, S., Giacomazza, D., Ghersi, G., Carrubba, V. L., & Dispenza, C. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.244 · Cited by 13
Mobarra, N., Soleimani, M., Pakzad, R., Enderami, S. E., & Pasalar, P. (2018) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2018.1505747 · Cited by 12
Volokhova, A. A., Fedorishin, D. A., Khvastunova, A. O., Spiridonova, T. I., Kozelskaya, A. I., Kzhyshkowska, J. G., Tverdokhlebov, S. I., & Kurzina, I. A. (2022) · Polymers · doi:10.3390/polym14030373 · Cited by 10
Zhu, M., Gu, J. H., He, L., Mahar, F. K., Kim, I. S., & Wei, K. (2019) · Fibers and Polymers · doi:10.1007/s12221-019-1188-7 · Cited by 9
Preparation and Drug-Release Kinetics of Porous Poly(L-lactic acid)/Rifampicin Blend Particles
Sasaki, T., Matsuura, H., & Tanaka, K. (2014) · ISRN Polymer Science · doi:10.1155/2014/128154 · Cited by 7
Pastore, G., Gabrielli, S., Cecchi, T., Giuliani, A., Cimarelli, C., Menchi, A., & Marcantoni, E. (2021) · RSC Advances · doi:10.1039/d0ra10637b · Cited by 7
Three Dimensional Porous Scaffolds: Mechanical and Biocompatibility Properties
Basu, B. (2016) · Indian Institute of Metals series · doi:10.1007/978-981-10-3059-8_10 · Cited by 6
Establishment of a pulmonary epithelial barrier on biodegradable poly-L-lactic-acid membranes
Montesanto, S., Smithers, N. P., Bucchieri, F., Brucato, V., Carrubba, V. L., Davies, D. E., & Conforti, F. (2019) · PLoS ONE · doi:10.1371/journal.pone.0210830 · Cited by 6
Albano, C., González, G., Palacios, J. K., Karam, A. R., Castillo, R. V., & Covis, M. (2013) · Revista de la Facultad de Ingeniería Universidad Central de Venezuela · Cited by 5
Guidotti, G., Soccio, M., Gazzano, M., Salatelli, E., Lotti, N., & Munari, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109306 · Cited by 5
Nano-Fibrous and Tubular Poly (Lactic Acid) Scaffolds for Vascular Tissue Engineering
Fattahı, F. S., Khoddamı, A., & Avinç, O. (2019) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22034/nmrj.2019.03.003 · Cited by 3
Pandey, A. K., & Sakurai, S. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.97088 · Cited by 1
Cited by
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Injectable “Skin Boosters” in Aging Skin Rejuvenation: A Current Overview
Rho, N.-K., Kim, H.-S., Kim, S.-Y., & Lee, W. (2024) · Archives of Plastic Surgery · doi:10.1055/a-2366-3436 · Cited by 50
Metadata
- Authors
- Capuana, E., Lopresti, F., Ceraulo, M., & La Carrubba, V.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-03-14
- Volume
- 14
- Issue
- 6
- Pages
- 1153
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4220743944
- Cited by
- 301
- References
- 146
- FWCI
- 15.72
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.