Advances and Challenges in Polymer-Based Scaffolds for Bone Tissue Engineering: A Path Towards Personalized Regenerative Medicine
Open accessThe DOI matches its Crossref record; 76 of the 78 references it cites were found in a registry or an index.
Abstract
Polymers have become essential in advancing bone tissue engineering, providing adaptable bone healing and regeneration solutions. Their biocompatibility and biodegradability make them ideal candidates for creating scaffolds that mimic the body’s natural extracellular matrix (ECM). However, significant challenges remain, including degradation by-products, insufficient mechanical strength, and suboptimal cellular interactions. This article addresses these challenges by evaluating the performance of polymers like poly(lactic-co-glycolic acid) (PLGA), polycaprolactone (PCL), and polylactic acid (PLA) in scaffold development. It also explores recent innovations, such as intelligent polymers, bioprinting, and the integration of bioactive molecules to enhance scaffold efficacy. We propose that overcoming current limitations requires a combination of novel biomaterials, advanced fabrication techniques, and tailored regulatory strategies. The future potential of polymer-based scaffolds in personalised regenerative medicine is discussed, focusing on their clinical applicability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 Hierarchical organisation of Type I collagen fibres in human bone [20].](https://figures.cochat.ai/paper-figures/94caab33a70d45ff959c7b73af5f633b/advances-and-challenges-in-polymer-based-scaffolds-for-bone-tissue-engineering-a-figure-3.jpg)
![Figure 4 Schematic representation of the synthesis, characterisation, and application of alginate/chitosan/mesoporous silica nanoparticle (MSN) composite scaffolds for bone tissue engineering. The scaffolds are fabricated using a freeze-drying process, resulting in a porous structure with enhanced mechanical strength, swelling capacity, and controlled degradation. Biological evaluations include cell attachment and proliferation assays (MTT assay) and osteogenic differentiation assessments using alkaline phosphatase activity and Alizarin red staining. The scaffolds show potential for applications in craniofacial bone defects, periodontal and peri-implant bone defects, and tooth extraction sockets. Adopted from [24].](https://figures.cochat.ai/paper-figures/a1677949ab2b4919b9b66885336aff8c/advances-and-challenges-in-polymer-based-scaffolds-for-bone-tissue-engineering-a-figure-4.jpg)
![Figure 5 Applications of polymer-based materials in dental and bone tissue engineering. Polymers serve diverse roles, including TMJ reconstruction, periodontitis treatment, drug delivery, maxillary sinus augmentation, alveolar socket preservation, and ridge augmentation. They support bone regeneration, osseointegration, and whole-tooth regeneration and provide scaffolds for regenerative endodontics and treating peri-implantitis and oral mucositis. These versatile materials offer promising solutions for complex dental and orthopaedic challenges [69].](https://figures.cochat.ai/paper-figures/828e7ea744dd4e2d8ebbf999c234851f/advances-and-challenges-in-polymer-based-scaffolds-for-bone-tissue-engineering-a-figure-5.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866 · cited 3×
“By employing additive manufacturing (AM), polymers such as PLA, PCL, and PEG are commonly used to create scaffolds that support bone regeneration [56,57].”
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345 · cited 8×
“However, due to its fast degradation, it is often combined with other polymers or materials to optimise its performance for longer-term applications [53].”
Influential3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332 · cited 6×
“Limitations Polymer-based scaffolds face significant These challenges include biodegradation, mechanical strength, cellular interactions, and scalability [1,67,70]. challenges in bone tissue engineering, limiting applicability.”
InfluentialScaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Porous scaffolds for bone regeneration
Abbasi, N., Hamlet, S., Love, R. M., & Nguyen, N.-T. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.007 · Cited by 858
Silk fibroin as biomaterial for bone tissue engineering
Melke, J., Midha, S., Ghosh, S., Ito, K., & Hofmann, S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.005 · Cited by 789 · cited 3×
“It boasts high tensile strength and elasticity, providing essential structural support during healing [30].”
Microbial response to acid stress: mechanisms and applications
Guan, N., & Liu, L. (2020) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-019-10226-1 · Cited by 662 · cited 1×
“Accumulation of acidic degradation products, for instance, can lead to local pH changes, negatively impacting cell viability and bone health [72] Additionally, the immune response to scaffold degradation products is a critical factor.”
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661 · cited 2×
“By employing additive manufacturing (AM), polymers such as PLA, PCL, and PEG are commonly used to create scaffolds that support bone regeneration [56,57].”
Cited by
Parvin, N., Aslam, M., Joo, S., & Mandal, T. K. (2025) · Molecules · doi:10.3390/molecules30153177 · Cited by 197
“Synthetic polymers like PLGA, PLA, PCL, and PEGylated derivatives are prized for their tunable degradation rates, mechanical properties, and reproducibility [67,68].”
Abdulsalam, L., Abubakar, S., Permatasari, I., Lawal, A. A., Uddin, S., Ullah, S., & Ahmad, I. (2025) · Polymers · doi:10.3390/polym17212901 · Cited by 154
Parvin, N., Joo, S. W., & Mandal, T. K. (2025) · Gels · doi:10.3390/gels11060383 · Cited by 97
“However, alginate lacks inherent cell-adhesion motifs, often necessitating chemical modification or blending with bioactive molecules to improve cellular interactions [24].”
Regenerative Endodontic Therapies: Harnessing Stem Cells, Scaffolds, and Growth Factors
Farjaminejad, R., Farjaminejad, S., & Garcı́a-Godoy, F. (2025) · Polymers · doi:10.3390/polym17111475 · Cited by 32
Self-citationAdvanced biomaterials in immune modulation: The future of regenerative therapies
Biglari, N., Razzaghi, M., Afkham, Y., Azimi, G., Gross, J. D., & Samadi, A. (2025) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2025.125972 · Cited by 39
Farjaminejad, S., & Dingle, A. M. (2025) · Bioelectronic Medicine · doi:10.1186/s42234-025-00180-x · Cited by 39
“However, they often suffer from limitations such as donor site morbidity, immune rejection, and poor integration (Farjaminejad et al. 2024a; Sun et al. 2023; Herculano et al. 2009).”
Self-citationStrategies for craniofacial tissue engineering: innovations for scalable bone regeneration
Vignolo, S. M., Roth, D. M., Wu, L., Cosgrove, J., & Bertassoni, L. E. (2025) · Plastic and Aesthetic Research · doi:10.20517/2347-9264.2025.09 · Cited by 76
“[156,175] Demineralized bone matrix (DBM), derived from decalcified allograft bone, retains embedded growth factors like BMPs, supporting osteoinduction.”
kaleshtari, A. H., Farjaminejad, S., Hasani, M., Farjaminejad, R., Foroozandeh, A., Abdouss, M., & Hasanzadeh, M. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100692 · Cited by 27
Self-citationKumar, P., Sharma, J., Kumar, R., Najser, J., Frantík, J., Manuja, A., Sunnam, N., & Praveenkumar, S. (2025) · Biomaterials Science · doi:10.1039/d4bm01606h · Cited by 28
Kruczkowska, W., Gałęziewska, J., Grabowska, K. H., Gromek, P., Czajkowska, K., Rybicki, M., Kciuk, M., & Kłosiński, K. K. (2025) · Molecules · doi:10.3390/molecules30051017 · Cited by 24
“Variability in therapeutic effects across models, combined with limitations in biopolymer mechanical properties and the potential for inflammatory or toxic responses, necessitates further research to optimize scaffolds for neuroprotection [141–143].”
Polymer-Based Scaffolds as an Implantable Material in Regenerative Dentistry: A Review
Leško, Ľ., Jungová, P., Culenova, M., Thurzo, A., & Danišovič, Ľ. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16030080 · Cited by 23
“The integration of nanotechnology and stimuli-responsive materials is expected to offer dynamic platforms that can modulate the release of growth factors or other bioactive agents in response to environmental cues, thereby enhancing the regenerative process [100,177].”
Farjaminejad, S., Farjaminejad, R., Sotoudehbagha, P., & Razavi, M. (2025) · Journal of Composites Science · doi:10.3390/jcs9080400 · Cited by 21
Self-citationPremjit, Y., Lawrence, M., Goyal, A., Ferreira, C., Jones, E., & Ganguly, P. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16070238 · Cited by 16
Aghayan, A. H., Mohammadi, D., Atashi, A., & Jamalpoor, Z. (2025) · Journal of Translational Medicine · doi:10.1186/s12967-025-06712-y · Cited by 23
Sultan, M. A., Aized, T., Farooq, M., Anwar, S., Ahmad, N., Tauseef, A., & Riaz, F. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1549191 · Cited by 18
Mierzejewska, Ż. A., Veselinović, V., Trtić, N., Marin, S., Borys, J., & Antonowicz, B. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17010044 · Cited by 16
“PLGA and PCL are highly effective carriers for osteogenic and angiogenic molecules [44,45].”
The Role of Tissue Engineering in Orthodontic and Orthognathic Treatment: A Narrative Review
Farjaminejad, R., Farjaminejad, S., Hasani, M., García-Godoy, F., Sayahpour, B., Marya, A., & Jamilian, A. (2025) · Oral · doi:10.3390/oral5010021 · Cited by 14
“Each material is selected for its unique properties: polymers for their flexibility and ease of manipulation, composites for their enhanced mechanical strength and osteoconductivity, and ceramics for their biocompatibility and bone-bonding capabilities [44–46].”
Self-citationDual-Function Biomaterials for Postoperative Osteosarcoma: Tumor Suppression and Bone Regeneration
Dong, H. F., Zhang, Q., Feng, Z.-Y., Huang, K., Nie, R., Li, L., Duan, H., & Xie, H.-Q. (2025) · Research · doi:10.34133/research.0978 · Cited by 15
Compaired, P. M., Fernández, Á., Seral, B., Torres-Campos, A., Remacha-Andrés, M., & Pérez, M. Á. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.115136 · Cited by 11
Strong living scaffolds for load-bearing musculoskeletal tissue regeneration
Chen, N., Wu, M., Williams, R., Yan, J., Zhou, J., Zhu, D., & Ding, Y. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102571 · Cited by 18
“Hydrolytic degradation of PLA, PGA, PLGA, and PLLA generates acidic byproducts, which can reduce local pH and provoke chronic inflammatory responses in vivo [96].”
Karamanlı, İ. A. (2026) · Polymers · doi:10.3390/polym18020236 · Cited by 13
Advancing biomedical applications: integrating textile innovations with tissue engineering
Ghosh, J., Rupanty, N. S., Asif, T. R., Noor, T., Islam, T., & Reukov, V. V. (2025) · Biomedical Materials · doi:10.1088/1748-605x/adda81 · Cited by 14
“These synthetic polymers, which combine innovative biomaterials with improved production techniques, have considerable potential for individualized regenerative medicine and clinical applications in load-bearing TE [ 65].”
Biodegradable Natural Polymer‐Based Drug Delivery Systems for Bone Tissue Engineering
Jo, H., Kang, S., Yang, J. E., Kim, I., & Lee, S. S. (2026) · Medicinal Research Reviews · doi:10.1002/med.70039 · Cited by 14
“…collagen sources to address immunogenicity concerns, implementing Artificial Intelligence (AI)‐assisted scaffold design for precision medicine applications, and creating multifunctional platforms that combine sustained drug delivery with enhanced osteogenesis and angiogenesis [131–134].”
Rajzer, I., Kurowska, A., Nikodem, A., Janusz, J., Jabłoński, A., Ziąbka, M., Menaszek, E., Franková, J., Piekarczyk, W., & Fabia, J. (2025) · Materials · doi:10.3390/ma18081826 · Cited by 9
Advancements in synthetic polymers for 3D bioprinting materials, applications, and future prospects
Agarwalla, A., Ahmed, W. K., Al-Marzouqi, A. H., Zaneldin, E. K., Rizvi, T. A., & Khan, M. (2025) · International Journal of Polymeric Materials · doi:10.1080/00914037.2025.2562081 · Cited by 12
“Nevertheless, there are certain risks associated with the clinical use of synthetic polymers, which should also be taken into consideration, in spite of the benefits described [28] .”
Farjaminejad, S., Farjaminejad, R., Hasani, M., & Shojaei, S. (2025) · Journal of Bionic Engineering · doi:10.1007/s42235-025-00739-z · Cited by 11
“A wide range of biocompatible materials—such as PLGA, PCL, and hydro-gel-based bioinks incorporating HA—are compatible with 3D printing and have been successfully used for the controlled release of drugs and growth factors [48, 50, 54].”
Self-citationModern Approaches and Emerging Biological Therapies to Treat Fracture Nonunion
Wier, J. R., Shelby, H., Bergren, S., Patterson, J. T., & Lieberman, J. R. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17111457 · Cited by 11
“To overcome these limitations, hybrid approaches incorporating natural polymers with ceramics, synthetic polymers, or growth factors have been explored to optimize scaffold mechanical integrity, degradation profile, and osteoinductive capacity in the treatment of bone nonunion [155].”
3D In Vitro Models of the Bone Marrow Niche
Scala, P., Serio, B., & Giudice, V. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01421 · Cited by 14
Alkandari, M., Alkandari, M., Atia, G. A. N., El-Halim, E. A., Ghobashy, M. M., Shalaby, H. K., Rokaya, D., Foda, T., Hendy, K. A. E. K., Danishuddin, et al. (2025) · Growth Factors · doi:10.1080/08977194.2025.2606675 · Cited by 7
Manu, D. R., Portan, D. V., Vuță, M., & Dobreanu, M. (2025) · Biomimetics · doi:10.3390/biomimetics10070438 · Cited by 7
“In addition, various bioactive materials have been employed to create injectable hydrogel scaffolds for cartilage regeneration [187,199].”
Biofunctional Testing of a Degradable Implant Made by Mg-Nd and Mg-Zn Alloys Used for Bone Defects
Mănescu, V., Antoniac, A., Păltânea, G., Antoniac, I., Páll, E., Moraru, M.-C., Dreancă, A., Sevastre, B., Ștefănoiu, R., Ciocoiu, R. C., et al. (2026) · Biomimetics · doi:10.3390/biomimetics11030169 · Cited by 6
Khan, R., Haider, S., Wahit, M. U., Haider, A., Aqif, M., Khan, S. U., Yadav, R., & Razak, S. I. A. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.152080 · Cited by 8
Mamaghani, K. R., Parvin, N., & Rajabzadeh, M. (2025) · Nano Trends · doi:10.1016/j.nwnano.2025.100159 · Cited by 7
Okwuwa, C. C., Olunusi, S. O., Abutu, D., Umunnawuike, C., Amenaghawon, A. N., & Ighalo, J. O. (2026) · Biopolymers · doi:10.1002/bip.70086 · Cited by 8
“However, problems concerning the selection of a suitable solvent, regulation of viscosity, and alignment of fibers have to be addressed to obtain the optimum performance of the scaffolds [62].”
kaleshtari, A. H., Hasani, M., Farjaminejad, S., Farjaminejad, R., Foroozandeh, A., Abdouss, M., & Hasanzadeh, M. (2026) · RSC Advances · doi:10.1039/d6ra01314g · Cited by 5
Self-citationÁngel-Sánchez, K. D., Treviño-Pacheco, A. V., Perales-Martínez, I. A., Romero, O. M., Olvera-Trejo, D., & Elías-Zúñiga, A. (2025) · Polymers · doi:10.3390/polym17111520 · Cited by 5
“Hydrogels form the soft skeleton of bone tissue engineering, providing hydrophilicity and flexibility [11].”
3D bioprinting for facial reconstruction: Advances and challenges
Eskandar, K. (2025) · Regenesis repair rehabilitation. · doi:10.1016/j.rerere.2025.04.002 · Cited by 5
Šebová, E., Leal, F., Klusáček Rampichová, M., Nirwan, V. P., Fahmi, A., Costa, P. F., & Filová, E. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26115383 · Cited by 4
“It is not only nature-based polymers which are used in bone tissue engineering; synthetic ones offer versatility based on their structure degradation rates and their tunable properties [10,19].”
Chong, W. J., Sola, A., Li, Y., Wright, P., & Wen, C. (2025) · ACS Polymers Au · doi:10.1021/acspolymersau.5c00102 · Cited by 5
Bakthavachalam, B., & Elsen, S. R. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.108344 · Cited by 4
Yun, X., Li, Z., Yan, Z., Li, S., Dai, Z., Hu, J., Ren, Y., Huang, L., Wang, Q., Zhang, C., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102621 · Cited by 5
“Compared to strategies relying on chemical factor release, surface structural signals provide benefits such as precise spatial localization, high stability, and resistance to enzymatic degradation [57].”
Emami, A., & Oskouie, I. M. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70476 · Cited by 4
Tang, S., Lv, L., Liu, N., Xu, X., Khan, Q., & Yu, S. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.103202 · Cited by 4
“Natural polymers like chitosan, alginate, collagen, gelatin, and hyaluronic acid contain bioactive motifs that enhance tissue integration, migration, and immune cell adhesion include [13,14].”
Integrating Physical and Biochemical Cues for Muscle Engineering: Scaffolds and Graft Durability
Yousefi, F., Foster, L. A., Selim, O. A., & Zhao, C. (2024) · Bioengineering · doi:10.3390/bioengineering11121245 · Cited by 5
Efficacy of Three-Dimensional Bioactive Composites in Long Bone Repair with Photobiomodulation
Júnior, S. J. R., dos Santos, L. C., Buchaim, D. V., Duarte, M. A. H., Alcalde, M. P., Barraviera, B., Ferreira, R. S., Plepis, A. M. D. G., Martins, V. D. C. A., Santos, P. S. D. S., et al. (2025) · Materials · doi:10.3390/ma18081704 · Cited by 5
“This improvement is evidenced by the alignment, orientation, and density of collagen fibers, as provided by oriented anisotropic birefringence [88–92].”
Mohammadzadeh, M., Labbaf, S., Kermanpur, A., & Esmaeili, J. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500084 · Cited by 5
“Furthermore, PLGA exhibits superior biocompatibility, excellent mechanical processability, and broader versatility compared to more hydrophobic polymers such as PCL, supporting better cell attachment and proliferation [21, 22].”
Mangano, C., Riberti, N., Orilisi, G., Tecco, S., Furlani, M., Giommi, C., Mengucci, P., Giorgini, E., & Giuliani, A. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16070237 · Cited by 6
“Moreover, an optimal biomaterial should degrade gradually, being fully replaced by vital bone tissue, with the resorption rate matched to the rate of new bone formation; excessively rapid degradation can impair regenerative outcomes [7,8].”
Advances in lignin and lignin-based composites in biomedical applications
Taib, M. N. A. M., Osman, S., Solihat, N. N., Arnata, I. W., Sartika, D., Jamal, T., & Saji, V. S. (2026) · Biomaterials Science · doi:10.1039/d5bm01439e · Cited by 4
Microstructure refinement and in vivo evaluation of biodegradable magnesium metal matrix composites
Sotoudehbagha, P., Grise, A., Romero, A., Larraza, A., Latt, S., Flores, A. C., Romero, K., Lovejoy, J., & Razavi, M. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.09.116 · Cited by 4
Tripathy, D., Rout, S. R., Saha, I., Halder, J., Rajwar, T. K., Rai, V. K., Pradhan, D., Mishra, A. K., Mahanty, R., Dash, P., et al. (2025) · Current Pharmaceutical Design · doi:10.2174/0113816128433361251009063909 · Cited by 6
Polymeric Materials in Biomedical Engineering: A Bibliometric Mapping
Veres, C., Tănase, M., & Szabo, D. A. (2025) · Polymers · doi:10.3390/polym17212886 · Cited by 7
Microbially derived (γ-PGA) poly-γ-glutamic acid: applications and commercial uses across industries
Rajput, R., Saha, S., Gill, H. S., Rajeev, M., & Pandit, S. (2025) · Preparative Biochemistry & Biotechnology · doi:10.1080/10826068.2025.2604635 · Cited by 3
“[56] For cartilage repair, γ-PGA scaffolds replicate key features of native hydrated matrix environments, supporting chondrocyte proliferation and extracellular matrix formation with morphology comparable to native cartilage tissues.”
The Future of Biomaterials in Dentistry: Innovations in Drug Delivery and Regenerative Medicine
Farjaminejad, R., Farjaminejad, S., Garcia-Godoy, F., HASSANI, M., & Rahimikia, K. (2025) · Journal of Applied Dentistry and Oral Sciences · doi:10.1177/30497418251410635 · Cited by 5
Self-citationElectrically active biomaterials for osteochondral tissue engineering: a review
Yeni, Ş. B., Erarslan, A., & Özerol, E. A. (2026) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2026.2638414 · Cited by 3
Saha, R. K., Hassan, M., Ali, M. R., Islam, M. M., & Das, A. (2026) · Biomedical Engineering Advances · doi:10.1016/j.bea.2026.100216 · Cited by 5
Babu, S., Shanmugavadivu, A., Lekhavadhani, S., & Selvamurugan, N. (2026) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2026.102029 · Cited by 5
Impact of Poly(Lactic Acid) and Graphene Oxide Nanocomposite on Cellular Viability and Proliferation
Pomini, K. T., Ferreira, J. C., da Silva, L. M. D., Totti, P. G. F., Alves, M. G., Pereira, E. D. S. B. M., Soares, M. M., Maria, D. A., & Rici, R. E. G. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17070892 · Cited by 3
Biomaterials and Tissue Engineering in Neurosurgery: Current Innovations and Future Directions
Golubović, J., & Vučurović, D. G. (2025) · BioTech · doi:10.3390/biotech14030065 · Cited by 2
“Regulatory pathways will demand a demonstration of safety and efficacy for each new device or scaffold, meaning only the most robust technologies will reach trials [43,44].”
Guo, A., Zhao, H., Zhao, Y., Lin, W., Guo, S., Xing, H., Chen, Q., & Lai, Q. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214629 · Cited by 2
Enhancing female fertility by biomaterial-based regeneration of uterine tubes
Culenova, M., & Kleinová, M. (2025) · Cell Transplantation · doi:10.1177/09636897251397047 · Cited by 3
“Furthermore, some synthetic polymers can produce acidic degradation byproducts that may induce in situ inflammation 56 .”
Hybrid PCL/Ha/Sep 3D Printed Scaffolds With Improved Surface and Bioactivity for Bone Tissue Repair
Neto, J. D. F. G., Salvo, L. C., Lima, T. D. P. D. L., Micocci, K. C., Marini, J., & Backes, E. H. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70471 · Cited by 2
Neto, J. D. F. G., Moura, B. P., Lima, T. D. P. D. L., Marega, F. M., Pinto, L. A., Granja, P. L., Pessan, L. A., & Backes, E. H. (2026) · ACS Omega · doi:10.1021/acsomega.5c09061 · Cited by 2
Zhou, Y., Xu, T., Han, P., Wang, C., Bartold, P. M., & Ivanovski, S. (2026) · Journal of Periodontal Research · doi:10.1111/jre.70078 · Cited by 5
Narrative Review of Endodontic Biomaterials
Farjaminejad, R., Farjaminejad, S., García-Godoy, A., & Garcia-Godoy, F. (2026) · Biomimetics · doi:10.3390/biomimetics11030179 · Cited by 2
“The combination of smart biomaterials, computational modeling, and patient-specific data is expected to refine prognosis prediction and support biologically conservative endodontic interventions [67,68].”
Self-citationBone tissue engineering, scaffold requirements and the utilization of natural polymers
Fadahunsi, A. A., Johnson, M., Rahman, S., & Mason, M. D. (2026) · Cellulose · doi:10.1007/s10570-026-06985-6 · Cited by 2
Jenvoraphot, T., Tangamatakul, K., Chotjumlong, P., Pinthonglor, P., Supanchart, C., Molloy, R., Derry, M. J., Topham, P. D., Tighe, B. J., Worajittiphon, P., et al. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c01986 · Cited by 2
Recapitulating Endochondral Ossification for Bone Repair: From Development to Engineering Strategy
Su, Y., He, Z., Chen, Q., Chen, L., Wei, C., Zhou, Z., Lin, J., Li, H., & Xing, D. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71155 · Cited by 2
AI-Powered Biomaterial Design for Tissue Engineering
Egbon, E. (2026) · Artificial intelligence · doi:10.5772/intechopen.1015273 · Cited by 2
Santos, J. D. A., & Coelho, A. D. A. (2025) · Journal of Pharmaceutical and BioTech Industry · doi:10.3390/jpbi2030015 · Cited by 2
Golrokhian, M., Rezaei, H. F., Rezaeianjam, M., Moslem, B., Naderpour, K., & Seraji, A. A. (2025) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2025.118590 · Cited by 3
Saud, A. N., Koç, E., Özdemir, O., Yıldızhan, Y., Colak, M., & Çetin, Y. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.11.206 · Cited by 1
Preparation of 3D printed PLA bone repair scaffolds based on in situ foamed technology
Yu, H., Zhang, S., Zhongxing, L., Ling, S. L., Jin-long, L., Li, X., & Cao, J. (2025) · Materials Letters · doi:10.1016/j.matlet.2025.139800 · Cited by 1
Блинов, А. В., Рехман, З. А., Sizonenko, M., Askerova, A., Golik, D., Serov, A. V., Bocharov, N., Rusev, N., Кузнецов, Е. Е., Ryazantsev, I., et al. (2025) · Journal of Composites Science · doi:10.3390/jcs9120655 · Cited by 2
“Recent studies have demonstrated the high efficiency of composite scaffolds in bone tissue regeneration [17–20].”
Saha, S., Kumar, N. V., Enugula, S., Sudhakaran, S. V., Datla, A., Vadrevu, S., Rath, S. N., & Chameettachal, S. (2025) · Biofabrication · doi:10.1088/1758-5090/ae2d9d · Cited by 1
“PCL is also valued for its slower rate of degradation than other synthetic bio-polymers, such as poly lactic-co-glycolic acid (PLGA) and poly L-lactic acid (PLLA) [17].”
Development and Characterization of Biodegradable Polymer Filaments for Additive Manufacturing
Balint, T., Živčák, J., Hudák, R., Schnitzer, M., Kohan, M., Danko, M., Staško, R., Szedlák, P., Jałbrzykowski, M., Leszczyńska, K., et al. (2025) · Polymers · doi:10.3390/polym17243328 · Cited by 1
Reyes, R. L., Yu, S.-G., Kang, N.-U., Sohn, D., Kim, H. W., & Cho, Y.-S. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.10.235 · Cited by 1
Jagitay, M. B., Ustundag, G., Celik, Z. D., Onur, A., Bedir, T., Torun, S. S., Ilhan, E., & Gündüz, O. (2026) · Polymer Bulletin · doi:10.1007/s00289-026-06303-x · Cited by 1
Jadid, N., Mariroh, A. L., Mawardani, A. N., & Taufany, F. (2026) · Annals of Biomedical Engineering · doi:10.1007/s10439-026-04100-1 · Cited by 1
Naderer, C., Priglinger, E., Ramsauer, M., Bergmayr, C., Gotterbarm, T., Danilchenko, S., Sivun, D., & Jacak, J. (2026) · Small · doi:10.1002/smll.202512037 · Cited by 3
Role of polymeric nanocomposite for tissue engineering applications
NAIK, S. R., Palanikumar, U., Ramesh, A., Dalimba, U., Revanasiddappa, B. C., Madhyastha, H., Nair, A., Lobo, W. L., & Prabhu, P. P. (2026) · RSC Advances · doi:10.1039/d6ra01646d · Cited by 2
Liu, F., Chen, X., Ren, Z., Wang, Y., Xie, H., Zhang, K., Liang, H., & Yuan, C. (2026) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2026.133710 · Cited by 1
Piezoelectric scaffolds for bone regeneration: a systematic review of preclinical studies
Minelli, M. M., Micalizzi, S., Longobardi, V., Kon, E., Oliva, P., & Rocca, F. D. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1848820 · Cited by 1
“Nevertheless, they offer several advantages, including greater flexibility and a biomimetic extracellular matrix-like environment that promotes cell adhesion and proliferation (Bakhtiari et al., 2023; Fan et al., 2023; Farjaminejad et al., 2024).”
Vita, A., Tiberio, F., Sibilia, D., Salvati, M., Tosi, D. D., Pietro, L. D., Alliva, A., Mariella, C., Parolini, O., & Lattanzi, W. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17070336 · Cited by 1
“…into routine laboratory consumables and cell culture workflows may be limited by material-dependent constraints, including sterilization sensitivity, degradation-related changes in surface and mechanical properties, and variability in long-term stability under culture conditions [10,11].”
Aghabarari, R., Alizadeh, R., Bohlouli, M., & Fernandéz‐Blázquez, J. P. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.6c00690 · Cited by 2
Vyas, J., Raytthatha, N., Vyas, P., Shah, N. V., & Modi, D. (2026) · Frontiers in Biomaterials Science · doi:10.3389/fbiom.2026.1861958 · Cited by 1
Praveen, H. S., Naik, P., Bhavya, B. S., Sudarshan, H. S., & Prakash Goudanavar, S. O. P. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102968 · Cited by 2
Fontana, G., Innamorati, G., & Giacomello, L. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27167259 · Cited by 1
“However, while these materials offer robust structural integrity, their bio-inert nature often results in poor cell adhesion and suboptimal tissue integration unless functionalized with bioactive additives or ceramics [4].”
Khrustaleva, A., Yedrissov, A., Khrustalev, D. P., Chernykh, I. V., Самородов, А. В., AKHMETOVA, S., Savelyev, A., Kiikbayev, M., Rusyaeva, P., Kazantsev, V., et al. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18091055 · Cited by 1
Singh, P., Kaul, S., Jain, N., Nagaich, U., Elella, M. H. A., Faia, P. M., & Araújo, E. S. (2026) · Ceramics · doi:10.3390/ceramics9100104 · Cited by 1
Furlani, M., Notarstefano, V., Riberti, N., D’Amico, E., Pierfelice, T. V., Mangano, C., Giorgini, E., Iezzi, G., & Giuliani, A. (2025) · Bioengineering · doi:10.3390/bioengineering12080848 · Cited by 2
“Furthermore, an optimal biomaterial should degrade gradually, ideally being entirely supplanted by vital bone tissue, with its resorption rate precisely synchronized with the rate of new bone formation; indeed, excessively rapid degradation can substantially compromise regenerative outcomes [15,16].”
Hybrid MPL Scaffolds with Nanoscale Mechanobiology for Bone-on-ChipPreprint
Naderer, C., Priglinger, E., Ramsauer, M., Bergmayr, C., Gotterbarm, T., Sivun, D., & Jacak, J. (2025) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2025.08.28.672808 · Cited by 1
Antunes, B. S. L., Pedrini, F., Komatsu, D., Asami, J., Dicko, C., & Duek, E. A. R. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.154129
Bioresorbable polymers and their types
Akram, A., Khanna, A., Sharma, N., & Butola, B. S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-31606-7.00011-9
Special Issue “Synthesis, Properties and Applications of Polymers”
Sapozhnikov, D. A. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms262010147
Role of Biopolymer in Bone Regeneration & Replacement
Singh, S. K., & Maddesiya, S. (2025) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9798898811419125010013
Barisón, M. J., Bandini, T. B., Berti, L. F., Stimamiglio, M. A., & Correa, A. (2025) · Stem Cell Reviews and Reports · doi:10.1007/s12015-025-11020-5 · Cited by 1
Balasubramanian, M., Kandaswamy, R., & Ganesan, S. M. (2025) · New Journal of Chemistry · doi:10.1039/d5nj03644e · Cited by 2
Balasubramanian, M., Ganesan, S. M., Thangavel, V. C., Sankaralingam, P., & Kandaswamy, R. (2025) · Biomedical engineering · doi:10.5772/intechopen.1012729
Amphiphilic Copolymers—A Turning Point on the Way to Functional Nanocomposites and Technologies
Kausar, A. (2025) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2025.2595269
“…performance macromolecular hybrids depicted valuable structural, microscopic and physical characteristics; thereby leading to applications in the fields of energy production and storage, [11,12] water purification membranes, [13] shape memory, [14] drug delivery/tissue scaffolding, [15,16] etc.”
John, A., Shetty, A. M., Vadakkepushpakath, A. N., Ashtekar, H., SUMUKH, P. R., Menon, G., Saldanha, M. C., & Gandhi, K. S. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101517
Metadata
- Authors
- Farjaminejad, S., Farjaminejad, R., Hasani, M., Garcia-Godoy, F., Abdouss, M., Marya, A., Harsoputranto, A., & Jamilian, A.
- Affiliations
- City, University of London (GB)
- Islamic Azad University, Tehran (IR)
- Department of Bioscience Research, Bioscience Research Center, College of Dentistry, University of Tennessee Health Science Center, 875 Union Avenue, Memphis, TN 38163, USA
- Amirkabir University of Technology (IR)
- University of Greater Manchester (GB)
- Corresponding author
- Jamilian, Abdolreza
- ORCID
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2024-11-26
- Volume
- 16
- Issue
- 23
- Pages
- 3303
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC11644794
- OpenAlex
- W4404761964
- Cited by
- 158
- References
- 78
- Citations by year
- 2026: 88 · 2025: 69 · 2024: 1
- FWCI
- 5.66
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- polymer scaffolds, bone tissue engineering, PLGA, polycaprolactone, polylactic acid, mechanical strength, extracellular matrix mimicry, bioprinting, bioactive compounds, biomaterials, clinical translation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.