Advances and Challenges in Polymer-Based Scaffolds for Bone Tissue Engineering: A Path Towards Personalized Regenerative Medicine
Open accessThe DOI matches its Crossref record; 76 of the 78 references it cites were found in a registry or an index.
Abstract
Polymers have become essential in advancing bone tissue engineering, providing adaptable bone healing and regeneration solutions. Their biocompatibility and biodegradability make them ideal candidates for creating scaffolds that mimic the body’s natural extracellular matrix (ECM). However, significant challenges remain, including degradation by-products, insufficient mechanical strength, and suboptimal cellular interactions. This article addresses these challenges by evaluating the performance of polymers like poly(lactic-co-glycolic acid) (PLGA), polycaprolactone (PCL), and polylactic acid (PLA) in scaffold development. It also explores recent innovations, such as intelligent polymers, bioprinting, and the integration of bioactive molecules to enhance scaffold efficacy. We propose that overcoming current limitations requires a combination of novel biomaterials, advanced fabrication techniques, and tailored regulatory strategies. The future potential of polymer-based scaffolds in personalised regenerative medicine is discussed, focusing on their clinical applicability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 Hierarchical organisation of Type I collagen fibres in human bone [20].](https://figures.cochat.ai/paper-figures/94caab33a70d45ff959c7b73af5f633b/advances-and-challenges-in-polymer-based-scaffolds-for-bone-tissue-engineering-a-figure-3.jpg)
![Figure 4 Schematic representation of the synthesis, characterisation, and application of alginate/chitosan/mesoporous silica nanoparticle (MSN) composite scaffolds for bone tissue engineering. The scaffolds are fabricated using a freeze-drying process, resulting in a porous structure with enhanced mechanical strength, swelling capacity, and controlled degradation. Biological evaluations include cell attachment and proliferation assays (MTT assay) and osteogenic differentiation assessments using alkaline phosphatase activity and Alizarin red staining. The scaffolds show potential for applications in craniofacial bone defects, periodontal and peri-implant bone defects, and tooth extraction sockets. Adopted from [24].](https://figures.cochat.ai/paper-figures/a1677949ab2b4919b9b66885336aff8c/advances-and-challenges-in-polymer-based-scaffolds-for-bone-tissue-engineering-a-figure-4.jpg)
![Figure 5 Applications of polymer-based materials in dental and bone tissue engineering. Polymers serve diverse roles, including TMJ reconstruction, periodontitis treatment, drug delivery, maxillary sinus augmentation, alveolar socket preservation, and ridge augmentation. They support bone regeneration, osseointegration, and whole-tooth regeneration and provide scaffolds for regenerative endodontics and treating peri-implantitis and oral mucositis. These versatile materials offer promising solutions for complex dental and orthopaedic challenges [69].](https://figures.cochat.ai/paper-figures/828e7ea744dd4e2d8ebbf999c234851f/advances-and-challenges-in-polymer-based-scaffolds-for-bone-tissue-engineering-a-figure-5.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866 · cited 3×
“By employing additive manufacturing (AM), polymers such as PLA, PCL, and PEG are commonly used to create scaffolds that support bone regeneration [56,57].”
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345 · cited 8×
“However, due to its fast degradation, it is often combined with other polymers or materials to optimise its performance for longer-term applications [53].”
Influential3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332 · cited 6×
“Limitations Polymer-based scaffolds face significant These challenges include biodegradation, mechanical strength, cellular interactions, and scalability [1,67,70]. challenges in bone tissue engineering, limiting applicability.”
InfluentialScaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Porous scaffolds for bone regeneration
Abbasi, N., Hamlet, S., Love, R. M., & Nguyen, N.-T. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.007 · Cited by 858
Silk fibroin as biomaterial for bone tissue engineering
Melke, J., Midha, S., Ghosh, S., Ito, K., & Hofmann, S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.005 · Cited by 789 · cited 3×
“It boasts high tensile strength and elasticity, providing essential structural support during healing [30].”
Microbial response to acid stress: mechanisms and applications
Guan, N., & Liu, L. (2020) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-019-10226-1 · Cited by 662 · cited 1×
“Accumulation of acidic degradation products, for instance, can lead to local pH changes, negatively impacting cell viability and bone health [72] Additionally, the immune response to scaffold degradation products is a critical factor.”
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661 · cited 2×
“By employing additive manufacturing (AM), polymers such as PLA, PCL, and PEG are commonly used to create scaffolds that support bone regeneration [56,57].”
Cited by
Items 101–158 of 158
Parvathy, G. H., Nidhish Kumar, P., Y.V, S., Mathew, C. T., & Thomas, J. K. (2025) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2025.2605323 · Cited by 1
Carbon-Based Nanocomposites: Advanced Materials for Tissue Engineering Applications
Raja, V., Katal, D., Kour, G., Kaur, S., & Malik, A. Q. (2026) · Lecture notes in nanoscale science and technology · doi:10.1007/978-3-032-10637-7_4
Jeyaraman, M., Jeyaraman, N., Nallakumarasamy, A., Murugan, S., & Muthu, S. (2026) · World Journal of Methodology · doi:10.5662/wjm.v16.i1.109784
Exploring the Role of Natural, Synthetic, and Biodegradable Polymers in Biomedical Applications
Shrivastav, A., & Das, S. (2026) · IGI Global eBooks · doi:10.4018/979-8-3373-9454-1.ch009
Nanobubbles for bone-targeted drug delivery: Biodistribution imaging and osteoporotic therapy
Sotoudehbagha, P., Faze, T., Larraza, A., Mata, A. A., & Razavi, M. (2026) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2026.108152
Bian, T., Yibo, X., Hongli, L., & Xing, H. (2026) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2026.132280
Sekar, S., Sadhasivam, S., Sekar, S., Lee, Y., Balaji, M., Vaithilingam, S., Srinivasan, N., Krishnan, E., & Lee, S. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.03.133
Artificial ovaries and the future of women's health: Shaping novel functions
Parra, J. P. R. L. L., Abuna, R. P. F., Miglino, M. A., Arantes, L. B., Laurindo, L. F., Damous, L. L., Garcia, M. H. H., Barbalho, S. M., Meirelles, F. V., Direito, R., et al. (2026) · Translational research · doi:10.1016/j.trsl.2026.03.003
Engineering Gallium-Silk Fibroin-Gelatin Porous Scaffolds for Tissue Regenration
Abdulla, E., Al-Ani, A., Ali, A. A., Chan, V., & Truong, V. K. (2025) · International Conference on Health Science and Technology (ICHST) · doi:10.1109/ichst66555.2025.11428463
Bioactive materials and drug delivery in 3D printing for bone regeneration
Wang, K., Khalid, M., Lv, H., & Song, R. (2026) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-026-00276-4 · Cited by 2
“Pure PLGA is non-osteoinductive, can release acidic byproducts, and is thermally unstable at high temperatures, which led to the use of composites, including calcium sul - fate, HA, or collagen, to enhance mechanical properties and biological performance [69, 86].”
Serova, V. A., Mankaev, B. N., Chernikova, E., Berkovich, A., Alekseyev, R., & Karlov, S. S. (2025) · Polymer Science Series B · doi:10.1134/s1560090425601074
Suaebah, E., Yunata, E. E., Arifin, R., Maftuhin, W., Putri, N. P., Fitriana, F., & Munasir, M. (2026) · Digest Journal of Nanomaterials and Biostructures · doi:10.31083/djnb51673
Saravanan, L., Sabira, A. M., Srinivasan, S., Vijayalekha, A., & Pandurangan, A. K. (2026) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-026-00585-3 · Cited by 1
Nikhil, A., Bohns, F. R., Beato, P. S., Akhtar, R., & Kalaskar, D. M. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c02458
Injectable grafts for hard tissue engineering: current trends and future perspectives
Ranjan, R., Kumar, V., & Katyayan, A. (2026) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2026.2659235
Sun, Z., Li, W., Wang, X., Wu, H., Wang, X., Shen, Y., & Zhou, D. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115792
Toward next-generation hip implants: From failure mechanisms to translational design
Luo, Y., Turgeon, T. R., & Polyzois, I. (2026) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2026.101122 · Cited by 3
“…formulation, crystallinity control, graded porosity and strut geometry, and graded or segmental coatings — each offering a route to engineer a stiffness – degradation trajectory that maintains early mechanical competence while enabling progressive load transfer to regenerating bone [123,124].”
Valorization of food side streams for sustainable cultivated meat production
Xie, X., Jing, L., Huang, D., & Liu, S.-Q. (2026) · Bioresource Technology · doi:10.1016/j.biortech.2026.135076 · Cited by 1
Assessing the efficacy of biocompatible materials in restorative dentistry
Deshpande, P. R., Pansare, B. S., Darekar, S., Baheti, R. R., & Cengiz, K. (2026) · AIP conference proceedings · doi:10.1063/5.0328276
Mazurek, Ł., Konop, M., & Guastaldi, F. P. S. (2026) · Journal of Biomaterials Applications · doi:10.1177/08853282261459552
“5 These challenges have led to the search for new solutions, with bone tissue engineering becoming an important area of research.”
A review on thiolated sodium carboxymethyl cellulose scaffolds in bone tissue engineering
Tendolkar, Y. U., Rahaman, J., & Mukherjee, D. (2026) · Medicine in Novel Technology and Devices · doi:10.1016/j.medntd.2026.100447
Marwan-Abdelbaset, E., Lu, X., & Tan, D. (2026) · Biomolecules · doi:10.3390/biom16060889
“Scaffolds serve as essential biomaterials that promote cell-biomaterial interaction, allow the passage of nutrients and gases, and biodegrade at a rate synchronized with tissue regeneration [42–44].”
Translational Progress and Clinical Challenges in Bioengineered Bone and Joint Repair
Sunkara, A., McCloskey, C. P., Dias, D. A., Kalala, S., Peterson, J. T., Latshaw, M. J., Movva, A. K., & Anastasio, A. T. (2026) · Biomedicines · doi:10.3390/biomedicines14061374
Surface Functionalization of Biomedical Textiles Through Laser-Induced Coatings
Sahani, S. (2026) · IGI Global eBooks · doi:10.4018/979-8-3373-4104-0.ch008
Faridghiasi, F., Esmailabad, S. G., Moeinzadeh, A., Shamlou, S., & Kiani, J. (2026) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-026-00599-x
Polymeric nanomaterials and their applications in cancer therapy
Shakeran, Z. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-32888-6.00009-8
Romero-Grifaldo, G. P., Pérez‐Sánchez, L., Ramírez-Ruiz, F., López‐Villegas, E. O., Álvarez-Pérez, M. A., & Serrano‐Bello, J. (2026) · Emergent Materials · doi:10.1007/s42247-026-01454-z
Sultana, N., Akash, M. H., Mrittika, B. M., Das, H., Fatema, K., Maisha, M. N., Muntasir, M. J. A., & Alamgir, M. (2026) · RSC Advances · doi:10.1039/d6ra02127a
Bioorganometallic Polymers as Next-Generation Biodegradable and Bioactive Biomaterials
Khan, S. A. (2026) · IGI Global eBooks · doi:10.4018/979-8-2600-0060-1.ch006
Commercialized Natural Biopolymeric Composites for Tissue Engineering and Drug Delivery
Kaliannagounder, V. K. (2026) · Springer eBooks · doi:10.1007/978-981-95-9909-7_13
Bioactive Natural Compounds: A Review of Their Integration into Bone Tissue Engineering Scaffolds
Elwadood, A. N. A., Kenawy, M. Y., Ghareeb, D. A., & Hussein, A. (2026) · Annals of Biomedical Engineering · doi:10.1007/s10439-026-04283-7
Maharani, A. P., Kusumaningrum, W. B., Adhikara, A. G., Adriani, A., Puspitasari, A., Nuswantoro, N. F., Sudarmanto, S., Purnomo, D., Saksono, B., Tjong, D. H., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7164168
Advancements in pediatric tissue engineering: scaffold-based and cell-driven approaches
Sayed, U., Ali, A. M., Jyothi, S. R., Panigrahi, R., Arora, V., Nanda, A., Singla, S., & Sinha, A. (2026) · Cell and Tissue Banking · doi:10.1007/s10561-026-10241-3
“Synthetic scaffolds offer considerable versatility in terms of tunable physical and biological properties and are advantageous for their reproducibility and scalability in manufacturing (Farjaminejad et al. 2024).”
Carrascal-Hernández, D. C., Ortiz, J., Córdoba, A., Zapata, P. A., Valencia-Llano, C. H., Tenorio, D. L., Porras, D. P. N., Delgado‐Ospina, J., Cortes, E., Macías, J. D. R., et al. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27156856
Shaikh, S. I., Nadar, N. R., Shivakumar, S., & Sharma, S. (2026) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-026-00310-5
“Although complete remodelling required months to years, coordinated activity of osteoclasts and osteoblasts progressively reshaped the hard callus into mature bone, resulting in regained biomechanical strength and stability [4].”
Wang, X., Xie, W., Wang, Z., Zhang, H., Li, J., Gao, X., Zhou, D., Jiang, H., Huang, S., Zhao, Q., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.77690
Priwintoko, B., Palanisamy, S., Nugroho, S., Ismail, R., Batcha, A. A., Fitriyana, D. F., Muhamadin, R. C., Siregar, J. P., Palaniappan, M., Karuppusamy, M., et al. (2026) · Polymers for Advanced Technologies · doi:10.1002/pat.70683
“Therefore, evaluating creep behavior is essential to understand the long-term dimensional stability and mechanical reliability of biodegradable scaffolds [27, 148].”
Gonnella, G., O’Rourke, S. A., Dunne, A., & Kelly, D. J. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c00404 · Cited by 1
Hariawan, B. S., Cahyani, D. M., Utomo, W. P., Farida, N., Rozafia, A. I., Purbowati, R., Miatmoko, A., & Hartanto, D. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.103264
Kazemi, M., & Maralbashi, S. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00500
Jose, M. S., & Sumathi, S. (2026) · ChemNanoMat · doi:10.1002/cnma.70361
Hydrogels and Scaffold Fabrication and Optimization
Verma, A. K., Shankhwar, N., Singh, T., Singh, S., & Sharma, N. R. (2026) · Wiley eBooks · doi:10.1002/9781394355396.ch7
Азаматов, Т., Крупнин, А. Е., Pobezhimov, V. V., Malakhov, S. N., Несмелов, А. А., Сорокин, Ф. Д., & Chvalun, S. N. (2026) · Nanobiotechnology Reports · doi:10.1134/s2635167626602895
Moghaddam, M. M., Heydarinasab, H., Mohammadloo, H. E., Ramezanzadeh, B., & Deshmukh, K. (2026) · Sustainable materials and technologies · doi:10.1016/j.susmat.2026.e02251
Olmos-Villanueva, D., Noris-Suárez, K., & Suffo, M. (2026) · Polymers · doi:10.3390/polym18182266
“[5,7–9,13,25,32,35–37]”
Naveen, S. N., Mohanta, M., & Thirugnanam, A. (2026) · Fibers and Polymers · doi:10.1007/s12221-026-01570-x
“Other studies on porous polymer scaffolds for bone tissue engineering have found that higher porosity improves the scaffold’s interaction with body fluids [61].”
Product Liability for Smart Polymers and Responsive Biomaterials in Medical Devices
Shehab, R. M., Al-Dargazaly, R. A. A., & Bondazhevska, L. (2026) · Communications in computer and information science · doi:10.1007/978-3-032-39720-1_19
He, H., Chen, Z., Liu, H., Qiao, Z., Yang, S., Yang, H., Chen, X., Yang, Y., Wang, Z., & Li, Z. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1957296
“…have evaluated systems such as HA/ β -TCP–collagen, and general bone-engineering studies show hybrid systems can overcome single-material limitations (Yeo and Kim, 2012; Nie et al., 2015; Dhand et al., 2016; Ho et al., 2016; Farjaminejad et al., 2024; Hamdy et al., 2025; Kim D. W. et al., 2025).”
Soni, B., Garg, I., Kumar, G., Raj, R., Saifi, N., Verma, M., & Chauhan, I. (2026) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2026.2736161
The Role of Membranes in Tissue Regeneration Therapy: State of the Art and Future Perspectives
da Silva, R. F., de Castro, R. R., Teixeira, G. W., Soares, P. D. S., de Sousa, V. P., Rodrigues, C. R., do Carmo, F. A., & Cabral, L. M. (2026) · ACS Omega · doi:10.1021/acsomega.6c07202
Omar, H., Lugo, P. B. G., Bonfini, R., Antala, L., Fainor, M., Gullbrand, S. E., & Hast, M. W. (2026) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.70164
Pazhamannil, R. V., Idiculla, V. M., Anees, V. V. M., & AlKhedher, M. A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00789-9
Pharmaceutical and biomedical applications of polysaccharides
Gharibzahedi, S. M. T. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-44049-6.00015-6
Avances de los biomateriales para la regeneración ósea: revisión narrativa
Michilena-Molina, B. A., Salazar-Noboa, A. Y., & Cueva, G. V. U. (2026) · Sanitas. Revista arbitrada de ciencias de la salud. · doi:10.62574/zri7d7ao
Células madre en la endodoncia regenerativa: revisión sistemática
Jiménez-Aroca, E. D., & Mendoza-Valladares, J. P. (2026) · Cuaderno de odontología. Revista científica. · doi:10.62574/b022qnjg
Polysaccharide esters in drug delivery: Translation from laboratory scale toward clinical use
Gintsburg, D., Kosti, E.-M., Bernkop‐Schnürch, A., & Kali, G. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125941
Mwaanga, P., Ahmad, T., Danish, M., Manikandan, S., Dadi, M., Yasir, M., Deena, S. R., Subbaiya, R., & Karmegam, N. (2026) · Polymers for Advanced Technologies · doi:10.1002/pat.70767
Bioceramics in Dentistry: Applications, Advantages, and Clinical Challenges
Cedillo, J., Bangash, A. A., Agrawal, N. S., Sakhi, S., Tasneem, N., & Ameersheti, Y. (2026) · Cureus · doi:10.7759/cureus.118686
Metadata
- Authors
- Farjaminejad, S., Farjaminejad, R., Hasani, M., Garcia-Godoy, F., Abdouss, M., Marya, A., Harsoputranto, A., & Jamilian, A.
- Affiliations
- City, University of London (GB)
- Islamic Azad University, Tehran (IR)
- Department of Bioscience Research, Bioscience Research Center, College of Dentistry, University of Tennessee Health Science Center, 875 Union Avenue, Memphis, TN 38163, USA
- Amirkabir University of Technology (IR)
- University of Greater Manchester (GB)
- Corresponding author
- Jamilian, Abdolreza
- ORCID
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2024-11-26
- Volume
- 16
- Issue
- 23
- Pages
- 3303
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC11644794
- OpenAlex
- W4404761964
- Cited by
- 158
- References
- 78
- Citations by year
- 2026: 88 · 2025: 69 · 2024: 1
- FWCI
- 5.66
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- polymer scaffolds, bone tissue engineering, PLGA, polycaprolactone, polylactic acid, mechanical strength, extracellular matrix mimicry, bioprinting, bioactive compounds, biomaterials, clinical translation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.