Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap
Open accessThe DOI matches its Crossref record; 54 of the 57 references it cites were found in a registry or an index; 12 of the 159 sources its claims cite were checked for support.
Abstract
Industrial IoT (IIoT) is a novel concept of a fully connected, transparent, automated, and intelligent factory setup improving manufacturing processes and efficiency. To achieve this, existing hierarchical models must transition to a fully connected vertical model. Since IIoT is a novel approach, the environment is susceptible to cyber threat vectors, standardization, and interoperability issues, bridging the gaps at the IT/OT ICS level. This research enables an understanding of converged/hybrid cybersecurity standards, reviews the best practices, and provides a roadmap for identifying, aligning, mapping, converging, and implementing the right cybersecurity standards and strategies for securing M2M communications in the IIoT.
Overview
CoChat Summary
TL;DR
This paper surveys cyber threats and security standards for Industrial IoT/Industry 4.0 and argues that current standards are fragmented across IT, OT, and M2M communication layers. It proposes a unified IIoT standards roadmap to identify, align, map, and implement complementary standards and controls for securing smart manufacturing environments.
Key findings
- The authors reviewed over 90 papers published between 2016–2021, and 52 were within scope for securing M2M communications in IIoT.
- They report that around 48% of manufacturing industries have suffered a cyberattack, while 89% understand the importance of data standards but only 11% invest in relevant security controls and standards.
- The paper argues that IIoT environments remain vulnerable because IT and OT use different priorities and metrics: for IT, security is assessed as CIA, while for OT it is prioritized as AIC.
- The roadmap is intended to reduce gaps by aligning hybrid standards such as IEC 62443, OneM2M, ISO 27001, NIST 800-82, and others, and by using threat intelligence frameworks such as MITRE ATT&CK and IBM X-Force.
Methods
- Narrative review / survey of literature on standards, cybersecurity, and communications related to IIoT/I4.0.
- The paper is based on insights from an Industry 4.0 cybersecurity project; the authors say the work draws on that project’s insights.
- The main analysis is a qualitative comparison and mapping of cybersecurity standards, communication standards, threat landscapes, and IT/OT convergence issues, culminating in an author-designed unified IIoT standards roadmap.
Limitations
- The paper states that it is focused specifically on the IIoT/smart manufacturing industry, so its scope is not universal across all I4.0 sectors.
- It explicitly notes that gaps still exist even when standards and guidelines are implemented, because of issues such as lack of alignment, mapping, and understanding of the production environment.
- Evident from the text: the paper is a review and roadmap paper, not an empirical evaluation of the proposed roadmap in a real industrial deployment.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



![Figure 4 Hybrid security standards and controls adapted from [40].](https://figures.cochat.ai/paper-figures/2e0297bd974d457bbcf8dff61a93e48d/industrial-iot-cyber-threats-and-standards-landscape-evaluation-and-roadmap-figure-4.jpg)
![Figure 5 Cybersecurity standards coverage adapted from [40].](https://figures.cochat.ai/paper-figures/886c8da1f211426ab597bb7465a3763b/industrial-iot-cyber-threats-and-standards-landscape-evaluation-and-roadmap-figure-5.jpg)



Verification
Claims the paper makes
8 Valid · 22 Not valid · 97 Not checked · 73 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“There is a substantial gap between the existing information technology and operational technology (IT/OT) domains which makes the IIoT environment more vulnerable to existing security issues [5,6,7,8,9,10].”
§ Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap > 1. Industrial IoT (IIoT)
What the sources say
- Not checked — no full text of the sourcecites [5] Leander, B., Čaušević, A., and Hansson, H. (2019, January 26–29). Applicability of the IEC 62443 standard in Industry 4.0/IIoT. Proceedings of the 14th International Conference on Availability, Reliability and Security, Canterbury, UK. source
- Partly supportedcites [6] Gurtov, A., Liyanage, M., and Korzun, D. (2016). Secure Communication and Data Processing Challenges in the Industrial Internet. Balt. J. Mod. Comput., 4. sourceExperimental — accuracy not yet measured
The Introduction identifies an OT/IT divide that makes the Industrial Internet challenging to develop. Section 3.1 says that adopting IP connectivity introduced new security challenges to formerly isolated industrial networks, but it does not say that the OT/IT divide itself makes IIoT more vulnerable to existing security issues. No page numbers were available in our copy. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [7] Rak, J., and Hutchison, D. (2020). Guide to Disaster-Resilient Communication Networks, Springer. (Computer Communications and Networks). source
- Partly supportedcites [8] Martinez, 2019, A Square Peg in a Round Hole: The Complex Path for Wireless in the Manufacturing Industry, IEEE Commun. Mag. sourceExperimental — accuracy not yet measured
The paper describes interoperability problems with legacy industrial equipment (B. Undervalued industrial interests, p. 4) and security risks from wireless connections (D. Security, p. 3). It does not identify a substantial IT/OT-domain gap or say that such a gap makes IIoT more vulnerable to security issues. (LLM, conf=0.79)
- Not checked — no full text of the sourcecites [9] Sengupta, 2020, A Comprehensive Survey on Attacks, Security Issues and Blockchain Solutions for IoT and IIoT, J. Netw. Comput. Appl. source
- Partly supportedcites [10] Hameed, 2019, Understanding Security Requirements and Challenges in Internet of Things (IoT): A Review, J. Comput. Netw. Commun. sourceExperimental — accuracy not yet measured
Section 4.1 (page not provided) says that bringing Modbus and SCADA systems into IP-based networks is expected to increase attacks, supporting the claim of increased security risk in industrial systems. It does not identify a substantial gap between IT and OT domains as the cause. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Different NIST standards are implemented in IIoT, such as NIST 800-53, NIST 800-82, and NIST Cybersecurity Framework [43,44].”
§ Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap > 4. Standards > 4.2. Standardization Bodies
What the sources say
- Not matchedcites [43] Stouffer, K., Lightman, S., Pillitteri, V., Abrams, M., and Hahn, A. (2021, January 20). Guide to Industrial Control Systems (ICS) Security. NIST SP 800-82 Rev. 2, Available online: https://csrc.nist.gov/publications/detail/sp/800-82/rev-2/final.
We searched by its title and found no matching paper.
- Partly supportedcites [44] Hogan, M., and Piccarreta, B. (2018). Status of International Cybersecurity Standardization for the Internet of Things (IoT)—NISTIR 8200, NIST. sourceExperimental — accuracy not yet measured
The Cybersecurity Objectives section says NIST SP 800-82’s industrial-control security objectives can be adapted for IoT, and the Figure 10 discussion says a Cybersecurity Framework manufacturing profile may help manage IoT risks. SP 800-53 appears in a list of NIST publications, but the report does not establish that it—or all three named resources—is implemented in IIoT. The claim overstates the report’s discussion of applicability as implementation. (LLM, conf=0.84)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Implementing SIEM and SOAR tools at this layer will provide insights on the reactive approach to detect, prevent, and quickly recover from ICS attacks/failures [8].”
§ Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap > 7. The Unified IIoT Standards Roadmap
What the sources say
- Could not verifycites [8] Martinez, 2019, A Square Peg in a Round Hole: The Complex Path for Wireless in the Manufacturing Industry, IEEE Commun. Mag. sourceExperimental — accuracy not yet measured
The Security section (p. 3) discusses risks from wireless connections in factories, and Materializing security (p. 6) discusses secure wireless communications. Searches for SIEM, SOAR, ICS/SCADA, and incident response found no passage addressing whether those tools enable detection, prevention, or rapid recovery from ICS attacks or failures. (LLM, conf=0.75)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
In the paper
“Breaches happening in the industrial IoT domain would be critical due to specific exposures that are related to machine-to-machine (M2M) communication and environments [3].”
§ Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap > 1. Industrial IoT (IIoT)
What the sources say
- Not checked — no full text of the sourcecites [3] Bartoli, A., Dohler, M., Kountouris, A., and Barthel, D. (2015). Advanced security taxonomy for machine-to-machine (M2M) communications in 5G capillary networks. Machine-To-Machine (M2M) Communications, Woodhead Publishing. source
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“M2M communication networks are an integral part of connected factories involving high dependency on next generation wireless communication systems (5G, time sensitive networking, etc.) [4,5] and involving self-automated, self-driven, and self-learning network characteristics.”
§ Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap > 1. Industrial IoT (IIoT)
What the sources say
- Not matchedcites [4] Farkas, J., Varga, B., Miklós, G., and Sachs, J. (2019). 5G-TSN Integration Meets Networking Requirements for Industrial Automation, Ericsson.
We searched by its title and found no matching paper.
- Not checked — no full text of the sourcecites [5] Leander, B., Čaušević, A., and Hansson, H. (2019, January 26–29). Applicability of the IEC 62443 standard in Industry 4.0/IIoT. Proceedings of the 14th International Conference on Availability, Reliability and Security, Canterbury, UK. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
27 more claims
Create a free account to see all 200 claims and to verify the 14 references still open.
- It may state two separate claims as one. 80
- Probably not a substantial claim. 137
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Adaptive approaches implemented protection through complementary mechanisms: network segmentation isolated vulnerable protocols within secure zones, boundary firewalls with deep packet inspection filtered malicious commands, and protocol-aware monitoring detected anomalous communication patterns [18].”
From Manufacturing Cybersecurity for SMEs: Implementing Zero Trust in Legacy Industrial Environments (2026) · cites this paper as [18]
Experimental — accuracy not yet measured
Citations
Cites
Toward 6G Networks: Use Cases and Technologies
Giordani, M., Polese, M., Mezzavilla, M., Rangan, S., & Zorzi, M. (2020) · IEEE Communications Magazine · doi:10.1109/mcom.001.1900411 · Cited by 2,241 · cited 3×
“Looking at the future, it is likely that the growth in IoT communications will actively move toward 6G [56,57] which provides disruptive communication technologies and innovative network architectures.”
BackgroundGuide to Industrial Control Systems (ICS) Security
Stouffer, K., Pillitteri, V., Lightman, S., Abrams, M., & Hahn, A. (2015) · doi:10.6028/nist.sp.800-82r2 · Cited by 1,377 · cited 8×
“The National Institute of Standards and Technology (NIST) standards [43,62] are based on the best course of action and security controls to assist manufacturing industries to meet specific regulatory compliance requirements.”
BackgroundMethodInfluentialA Comprehensive Survey on Attacks, Security Issues and Blockchain Solutions for IoT and IIoT
Sengupta, J., Ruj, S., & Das Bit, S. (2020) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2019.102481 · Cited by 844
A review of industrial wireless networks in the context of Industry 4.0
Li, X., Li, D., Wan, J., Vasilakos, A. V., Lai, C.-F., & Wang, S. (2017) · Wireless Networks · doi:10.1007/s11276-015-1133-7 · Cited by 556 · cited 1×
“[95] outlines IWN (standards, QoS, real-time algorithms), security and data fusion issues in I4.”
BackgroundA roadmap for security challenges in the Internet of Things
Riahi Sfar, A., Natalizio, E., Challal, Y., & Chtourou, Z. (2018) · Digital Communications and Networks · doi:10.1016/j.dcan.2017.04.003 · Cited by 480 · cited 1×
“The use-case examples presented in [6,11,77] bring attention to wireless communication security and performance metrics for I4.”
MethodSecurity of smart manufacturing systems
Tuptuk, N., & Hailes, S. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.007 · Cited by 456 · cited 2×
“[83] discusses security of existing industrial and manufacturing systems and compares manufacturing and IT systems in terms of (systems, operations, security, and impact metrics) IIoT dependability metrics versus security metrics.”
BackgroundCurrent Standards Landscape for Smart Manufacturing Systems
Lu, Y., Morris, K., & Frechette, S. (2016) · doi:10.6028/nist.ir.8107 · Cited by 360 · cited 3×
“[28] discusses M2M standards (OneM2M, HyperCat, OMA Lightweight, ECLIPSE M2M, Weightless), cross-level standards (IEC 62443/ISA 99, ISO 9000, etc.) enabling technologies and key capabilities.”
BackgroundA survey of cyber security management in industrial control systems
Knowles, W., Prince, D., Hutchison, D., Disso, J. F. P., & Jones, K. (2015) · International Journal of Critical Infrastructure Protection · doi:10.1016/j.ijcip.2015.02.002 · Cited by 344 · cited 6×
“This is necessary because risk classification and security metrics need to be aligned with the industry’s Based on past attacks on IIoT ICS (shown in Figure 3) where Black Energy and Triton [46] affected huge amounts of manufacturing industries, it has become necessary to implement different security strategies and se…”
BackgroundInfluentialMachine-to-Machine Communications: Architectures, Standards and Applications
Chen, M. (2012) · KSII Transactions on Internet and Information Systems · doi:10.3837/tiis.2012.02.002 · Cited by 314 · cited 2×
“[97] mentions challenges associated with cellular M2M and capillary M2M communications using wireless standards.”
MethodCyber security risk assessment for SCADA and DCS networks
Ralston, P. A. S., Graham, J. H., & Hieb, J. L. (2007) · ISA Transactions · doi:10.1016/j.isatra.2007.04.003 · Cited by 267 · cited 1×
“ICS integrity is critical to OT security and the priority is to detect various security events and incidents, such as failure of devices and services exhausting resources early [100].”
Background
Research works printed but not linked: 6
- Stanley, D. (2020, October 20). IEEE 802.11 Standards: Wi-Fi 6 and Beyond. Available online: https://futurenetworks.ieee.org/images/files/pdf/FirstResponder/2019/Dorothy-Stanley.pdf.
- AIOTI Alliance for Internet of Things Innovation (2015, January 5). AIOTI WG03 IoT Standardisation. Proceedings of the Workshop “Platforms for connected Factories of the Future”, Brussels, Belgium. Available online: https://ec.europa.eu/information_society/newsroom/image/document/2015-44/11_heiles_11948.pdf.
- IEEE-SA (2021, January 03). IEEE Standards Activities for Advanced Manufacturing. Available online: www.standards.ieee.org.
- Sachs, J., Wallstedt, K., Alriksson, F., and Eneroth, G. (2019). Boosting smart manufacturing with 5G wireless connectivity. Ericsson Technol. Rev., Available online: https://www.ericsson.com/en/reports-and-papers/ericsson-technology-review/articles/boosting-smart-manufacturing-with-5g-wireless-connectivity.
- Kaur, 2014, Comparisons of Wired and Wireless Networks: A Review, Int. J. Adv. Eng. Technol., 5, 34
- Siemens (2020, December 01). Siemens and Qualcomm Technologies set up the first private standalone 5G network in an industrial environment. Report 2019. Available online: https://press.siemens.com/global/en/pressrelease/siemens-and-qualcomm-set-first-private-standalone-5g-network-industrial-environment.
Cited by
Ethical Dilemmas and Privacy Issues in Emerging Technologies: A Review
Dhirani, L. L., Mukhtiar, N., Chowdhry, B. S., & Newe, T. (2023) · Sensors · doi:10.3390/s23031151 · Cited by 320
“…such as: NIST Cybersecurity Framework (CSF), Risk Management Framework (RMF), etc. fit in. Industrial IoT, Cyber Threats, and Standards Landscape [14] Provides insights on Industry 4.0’s cybersecurity threat landscape and provides a roadmap for aligning data security standards and mitigating…”
BackgroundInfluentialSelf-citationApplication of Internet of Things (IoT) in Sustainable Supply Chain Management
Khan, Y., Su’ud, M. B. M., Alam, M. M., Ahmad, S. F., Ahmad (Ayassrah), A. Y. A. B., & Khan, N. (2022) · Sustainability · doi:10.3390/su15010694 · Cited by 188
“The IoT virtual network is created with the help of integrating products, processes, objects, workers, and systems that ensure communication in real-time [27].”
BackgroundIndustrial Internet of Things enabled technologies, challenges, and future directions
Ahmed, S. F., Alam, M. S. B., Hoque, M., Lameesa, A., Afrin, S., Farah, T., Kabir, M., Shafiullah, G., & Muyeen, S. M. (2023) · Computers and Electrical Engineering · doi:10.1016/j.compeleceng.2023.108847 · Cited by 179
Berghout, T., Benbouzid, M., & Muyeen, S. M. (2022) · International Journal of Critical Infrastructure Protection · doi:10.1016/j.ijcip.2022.100547 · Cited by 177
Cyber Threats Detection in Smart Environments Using SDN-Enabled DNN-LSTM Hybrid Framework
Razib, M. A., Javeed, D., Khan, M. T., Alkanhel, R. I., & Muthanna, M. S. A. (2022) · IEEE Access · doi:10.1109/access.2022.3172304 · Cited by 155
“Along with numerous benefits, the heterogeneous and prevalent nature of IoT also makes it susceptible to a variety of crucial security threats e.g. Denial of Services (DoS) attacks, data sniffing, spoofing, and network resource occupancy, etc [4, 5].”
BackgroundZhukabayeva, T. K., Zholshiyeva, L., Karabayev, N., Khan, S., & Alnazzawi, N. (2025) · Sensors · doi:10.3390/s25010213 · Cited by 204
Altulaihan, E., Almaiah, M. A., & Aljughaiman, A. (2022) · Electronics · doi:10.3390/electronics11203330 · Cited by 150
Stączek, P., Pizoń, J., Danilczuk, W., & Gola, A. (2021) · Sensors · doi:10.3390/s21237830 · Cited by 112
“Currently, the introduction of technologies and solutions associated with the Internet of Things (IoT), Cloud Computing, and Cyber-Physical Systems drives the Fourth Industrial Revolution [7].”
BackgroundInfluentialMachine Learning for Healthcare-IoT Security: A Review and Risk Mitigation
Khatun, M. A., Memon, S. F., Eising, C., & Dhirani, L. L. (2023) · IEEE Access · doi:10.1109/access.2023.3346320 · Cited by 179
“Legacy systems are most vulnerable to these attacks as they have limited memory [1].”
BackgroundMethodInfluentialSelf-citationSecuring the Internet of Things in Artificial Intelligence Era: A Comprehensive Survey
Humayun, M., Tariq, N., Alfayad, M., Zakwan, M., Alwakid, G. N., & Assiri, M. (2024) · IEEE Access · doi:10.1109/access.2024.3365634 · Cited by 119
The intersection of Artificial Intelligence and cybersecurity: Challenges and opportunities
Sontan, A. D., & Samuel, S. V. (2024) · World Journal of Advanced Research and Reviews · doi:10.30574/wjarr.2024.21.2.0607 · Cited by 98
“Furthermore, AI's capacity for predictive analytics and threat intelligence correlation enables it to anticipate emerging threats and recommend proactive countermeasures to bolster defences against future attacks [23].”
BackgroundCMAF-IIoT: Chaotic map-based authentication framework for Industrial Internet of Things
Tanveer, M., Badshah, A. A., Khan, A. U., Alasmary, H., & Chaudhry, S. A. (2023) · Internet of Things · doi:10.1016/j.iot.2023.100902 · Cited by 64
A Survey on Industrial Control System Digital Forensics: Challenges, Advances and Future Directions
Cook, M. M., Marnerides, A. K., Johnson, C., & Pezaros, D. P. (2023) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2023.3264680 · Cited by 88
“use of network technologies that enable wide-area and long range communications are being explored for ICS communications [203].”
BackgroundImran, M., Siddiqui, H. U. R., Raza, A., Raza, M. A., Rustam, F., & Ashraf, I. (2023) · Computers & Security · doi:10.1016/j.cose.2023.103445 · Cited by 91
5G in manufacturing: a literature review and future research
Cheng, J., Yang, Y., Zou, X., & Zuo, Y. N. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08990-y · Cited by 73
“Dhirani et al. put forward a unified roadmap to realize the industrial IoT, which is conducive to coordinating multi-level information security such as M2M communication, 5G, cloud computing, edge computing, etc. [17].”
IIoT Malware Detection Using Edge Computing and Deep Learning for Cybersecurity in Smart Factories
Kim, H.-M., & Lee, K. (2022) · Applied Sciences · doi:10.3390/app12157679 · Cited by 82
Al-Hawawreh, M. S., Alazab, M., Ferrag, M. A., & Hossain, M. S. (2023) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2023.103809 · Cited by 81
Review of Cyberattack Implementation, Detection, and Mitigation Methods in Cyber-Physical Systems
Mtukushe, N. F., Onaolapo, A. K., Aluko, A., & Dorrell, D. G. (2023) · Energies · doi:10.3390/en16135206 · Cited by 71
Shah, S., Madni, S. H. H., Hashim, S. Z. B. M., Ali, J., & Faheem, M. (2024) · IET Collaborative Intelligent Manufacturing · doi:10.1049/cim2.12093 · Cited by 69
FLDID: Federated Learning Enabled Deep Intrusion Detection in Smart Manufacturing Industries
Verma, P., Breslin, J. G., & O’Shea, D. (2022) · Sensors · doi:10.3390/s22228974 · Cited by 58
“SM industries are exposed to a variety of cyber attacks such as DoS, eavesdrop-ping, ransomware, side channel, port scan, passive replay, malicious code injection, buffer overflow and many more [6].”
An Intrusion Detection System for RPL-Based IoT Networks
Ribera, E. G., Alvarez, B. M., Samuel, C., Ioulianou, P. P., & Vassilakis, V. G. (2022) · Electronics · doi:10.3390/electronics11234041 · Cited by 61
IoT Vulnerabilities and Attacks: SILEX Malware Case Study
Mukhtar, B. I., Elsayed, M. S., Jurcut, A. D., & Azer, M. A. (2023) · Symmetry · doi:10.3390/sym15111978 · Cited by 50
Security in the Internet of Things Application Layer: Requirements, Threats, and Solutions
Abbasi, M., Plaza-Hernández, M., Prieto, J., & Corchado, J. M. (2022) · IEEE Access · doi:10.1109/access.2022.3205351 · Cited by 46
“These requirements have been identified through careful investigation of the papers related to the security 294 of IoT use cases and the security of IoT application pro-295 tocols [56], [57], [58], [59], [60], [61], [62], [63], [64] 296 (see Fig.”
BackgroundMethodA TabPFN-based intrusion detection system for the industrial internet of things
Ruiz-Villafranca, S., Roldán-Gómez, J., Gómez, J. M. C., Carrillo-Mondéjar, J., & Martínez, J. L. (2024) · The Journal of Supercomputing · doi:10.1007/s11227-024-06166-x · Cited by 47
“In addition, many of the devices found in such infrastructures are unlikely to be updated on a regular basis [5].”
A Brief Review on Internet of Things, Industry 4.0 and Cybersecurity
Rudenko, R., Pires, I. M., Oliveira, P., Barroso, J., & dos Reis, A. M. (2022) · Electronics · doi:10.3390/electronics11111742 · Cited by 40
“Dhirani et al. [29] conducted a study that presents a path to identify, align, map, converge, and implement appropriate cybersecurity standards and tactics to secure machine to machine communications in the IIoT.”
Mapping of Industrial IoT to IEC 62443 Standards
Cindrić, I., Jurčević, M., & Hadjina, T. (2025) · Sensors · doi:10.3390/s25030728 · Cited by 29
“Companies may rely too much on compliance with the standards instead of actively managing security risks [3].”
InfluentialKumar, G., & Altalbe, A. A. (2024) · Environment Development and Sustainability · doi:10.1007/s10668-024-04790-4 · Cited by 32
Khatun, M. A., Eising, C., & Dhirani, L. L. (2025) · IEEE Access · doi:10.1109/access.2025.3531659 · Cited by 43
“The future of a smart and sustainable healthcare ecosystem depends on the security of infrastructures enabled by the Industrial Internet of Things (IIoT) [1].”
Self-citationProtocol-Based and Hybrid Access Control for the IoT: Approaches and Research Opportunities
Pal, S., & Jadidi, Z. (2021) · Sensors · doi:10.3390/s21206832 · Cited by 30
“However, there is high heterogeneity of IIoT standards, techniques, and protocols, and hence, access control in this environment is challenging [101,112,113].”
BackgroundAjao, L. A., & Apeh, S. T. (2023) · Intelligent Systems with Applications · doi:10.1016/j.iswa.2023.200216 · Cited by 57
A Comprehensive Analysis of the Machine Learning Algorithms in IoT IDS Systems
Özdoğan, E. (2024) · IEEE Access · doi:10.1109/access.2024.3382539 · Cited by 27
“The confidentiality of the data transmitted in industrial IoT applications can be crucial as it may include sensitive information obtained from sensors [6], [7].”
BackgroundOpen Source IIoT Solution for Gas Waste Monitoring in Smart Factory
Waters, M., Waszczuk, P., Ayre, R., Dreze, A., McGlinchey, D., Alkali, B., & Morison, G. (2022) · Sensors · doi:10.3390/s22082972 · Cited by 29
“Industrial Internet of Things (IIoT) devices connect to a network in much the same way IT devices do, however there are key differences in the risk they present in terms of cybersecurity [30].”
BackgroundSecurity analysis of cyber physical system using digital forensic incident response
Binnar, P., Bhirud, S. G., & Kazi, F. (2023) · Cyber Security and Applications · doi:10.1016/j.csa.2023.100034 · Cited by 27
Deep learning-based stacked models for cyber-attack detection in industrial internet of things
Wang, W., Harrou, F., Benamar, B., Senouci, S., & Sun, Y. (2025) · Neural Computing and Applications · doi:10.1007/s00521-025-11418-9 · Cited by 28
Survey on Unified Threat Management (UTM) Systems for Home Networks
Siddiqui, A., Rimal, B. P., Reisslein, M., & Wang, Y. (2024) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2024.3382470 · Cited by 25
Ruiz-Villafranca, S., Carrillo-Mondéjar, J., Gómez, J. M. C., & Roldán-Gómez, J. (2023) · The Journal of Supercomputing · doi:10.1007/s11227-023-05098-2 · Cited by 21
“Another aspect to take into account is that many devices found in these infrastructures are not likely to be updated periodically [5].”
BackgroundKalpani, N., & Rodrigo, N. (2025) · Journal of Reliable Intelligent Environments · doi:10.1007/s40860-025-00264-0 · Cited by 20
“Exploring the rapidly evolving landscape of the IIoT, [36] emphasises its transformative impact on manufacturing through the integration of disruptive technologies such as IoT, cloud computing, and artificial intelligence.”
Gupta, S. (2023) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2023.100441 · Cited by 18
RetractedA Review of Hybrid Cyber Threats Modelling and Detection Using Artificial Intelligence in IIoT
Liu, Y., Li, S., Wang, X., & Xu, L. (2024) · Computer Modeling in Engineering & Sciences · doi:10.32604/cmes.2024.046473 · Cited by 31
“Dhirani et al. [12] reviewed general security standards and communication protocols of IoT in industry, and current challenges were presented.”
Seyedkolaei, A. A., Mahmoudi, F., & García, J. (2025) · Future Internet · doi:10.3390/fi17060230 · Cited by 19
Asset Management Method of Industrial IoT Systems for Cyber-Security Countermeasures
Matsumoto, N., Fujita, J., Endoh, H., Yamada, T., Sawada, K., & Kaneko, O. (2021) · Information · doi:10.3390/info12110460 · Cited by 13
“The studies are categorized by advanced security taxonomy for machine-to-machine communications [7], cyber threats and standards landscape for IIoT [8], trust management, privacy, authentication, threats and access control [9], and secure location-based authentication scheme in fog computing…”
BackgroundCyber-Resilience, Principles, and Practices
Meagher, H., & Dhirani, L. L. (2023) · Internet of things · doi:10.1007/978-3-031-45162-1_4 · Cited by 15
Self-citationHetmańczyk, M. P. (2024) · Applied Sciences · doi:10.3390/app14114380 · Cited by 22
MAS-LSTM: A Multi-Agent LSTM-Based Approach for Scalable Anomaly Detection in IIoT Networks
Qin, Z., Luo, Q., Nong, X., Chen, X., Zhang, H., & Wong, C. U. I. (2025) · Processes · doi:10.3390/pr13030753 · Cited by 20
The Development of Privacy Protection Standards for Smart Home
Liu, D., Wu, C., Yang, L., Zhao, X., & Sun, Q. (2022) · Wireless Communications and Mobile Computing · doi:10.1155/2022/9641143 · Cited by 12
“Device scenarios may set different goals for privacy protection, which need to be controlled by standards [32].”
BackgroundKour, K., Goswami, S., Sharma, D. M., Sivasankar, P. T., Vekariya, V., & Kumari, A. (2022) · International Journal of Communication Networks and Information Security (IJCNIS) · doi:10.17762/ijcnis.v14i3.5603 · Cited by 13
Ajao, L. A., & Apeh, S. T. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4178246 · Cited by 12
Ali, Z., Su, C., Terriche, Y., Rouhani, S. H., Hoang, L. Q. N., Sadiq, M., Tsao, S.-H., Abbas, S. Z., Ahmad, E., & Elsisi, M. (2025) · Neural Computing and Applications · doi:10.1007/s00521-025-11090-z · Cited by 19
“…privacy and prevent abnormal activities Requires the use of other countermeasures, not enough to prevent attacks alone Spread spectrum methods [123, 124] It provides a high level of protection and provides a solution to mitigate the detected attacks in MGs Complex implementations for smart grid…”
Hasan, K., Hossain, M. F., Amin, A., Sutradhar, Y., Jeny, I. J., & Mahmud, S. (2025) · Journal of Technologies Information and Communication · doi:10.55267/rtic/16176 · Cited by 16
Blockchain in IoT and Beyond: Case Studies on Interoperability and Privacy
Banerjee, A., Dutta, B., Mandal, T., Chakraborty, R., & Mondal, R. (2022) · Lecture notes on data engineering and communications technologies · doi:10.1007/978-981-16-9260-4_5 · Cited by 11
An IIoT-Based Networked Industrial Control System Architecture to Secure Industrial Applications
Sen, S. K., & Song, L. (2021) · IEEE Industrial Electronics and Applications Conference (IEACon) · doi:10.1109/ieacon51066.2021.9654520 · Cited by 11
КІБЕРБЕЗПЕКА В СФЕРІ МОРСЬКОГО СПОЛУЧЕННЯ
Qasim, N. H., Jawad, A. M., & Majeed, M. H. (2023) · Transport development · doi:10.33082/td.2023.3-18.05 · Cited by 10
Trust-Based Approaches Towards Enhancing IoT Security: A Systematic Literature Review
Okporokpo, O., Olajide, F., Ajienka, N., & Ma, X. (2023) · doi:10.5121/csit.2023.132103 · Cited by 20
Time Series Anomaly Detection with CNN for Environmental Sensors in Healthcare-IoT
Khatun, M. A., Bhattacharya, M., Eising, C., et al. (2024) · IEEE International Conference on Healthcare Informatics (ICHI) · doi:10.1109/ichi61247.2024.00075 · Cited by 10
“The Internet of Things (IoT) is a network of physical devices that communicate with each other through sensors, software, and connectivity [1], [2], [3].”
BackgroundSelf-citationSánchez-Solano, S., Camacho-Ruiz, E., Martínez‐Rodríguez, M. C., & Brox, P. (2022) · Sensors · doi:10.3390/s22052057 · Cited by 14
Building the Operational Technology (OT) Cybersecurity Workforce: What are Employers Looking for?
Ramezan, C. A., Coffy, P., & Lemons, J. (2023) · Journal of Cybersecurity Education Research and Practice · doi:10.32727/8.2023.31 · Cited by 10
Cybersecurity in Healthcare: New Threat to Patient Safety
Aldosari, B. (2025) · Cureus · doi:10.7759/cureus.83614 · Cited by 34
“Healthcare organizations must seamlessly integrate regulatory compliance, risk management, encryption, employee education, and robust incident response to foster a comprehensive defense posture [84].”
Zeydan, E., Arslan, Ş. S., Türk, Y., Hewa, T. M., & Liyanage, M. (2025) · IEEE Open Journal of the Communications Society · doi:10.1109/ojcoms.2025.3595403 · Cited by 13
Security of IoT Application Layer: Requirements, Threats, and Solutions
Abbasi, M., Plaza-Hernández, M., & Mezquita, Y. (2022) · Lecture notes in networks and systems · doi:10.1007/978-3-031-22356-3_9 · Cited by 13
Improving Method of Anomaly Detection Performance for Industrial IoT Environment
Kim, J., Shin, J., Park, K.-W., & Taek Seo, J. (2022) · Computers, Materials & Continua · doi:10.32604/cmc.2022.026619 · Cited by 8
Industrial Internet of Things (IIoT)
Schmitt, R., & Borck, C. (2022) · Springer eBooks · doi:10.1007/978-3-031-15428-7_25 · Cited by 8
Rajab, M. E., Yang, L., & Shami, A. A. (2024) · doi:10.36227/techrxiv.170475326.65758197/v1 · Cited by 8
Securing IoT Using Lightweight TCN for Edge Deployment on Raspberry Pi 4
Khatun, M. A., Eising, C., & Dhirani, L. L. (2025) · IEEE Open Journal of the Communications Society · doi:10.1109/ojcoms.2025.3649498 · Cited by 12
“The Internet of Things (IoT) encompasses physical devices equipped with sensors and software that exchange data over networks [2], [3].”
Self-citationModeling an edge computing arithmetic framework for IoT environments
Roig, P. J., Alcaraz, S., Gilly, K., Bernad, C., & Juiz, C. (2022) · Sensors · doi:10.3390/s22031084 · Cited by 7
“IIoT (Industrial Internet of Things): Edge computing and IoT allow a fully connected, automated and intelligent environment to improve efficiency applied to industrial processes [39].”
BackgroundMADESANT: malware detection and severity analysis in industrial environments
Jayalaxmi, P. L. S., Chakraborty, M., Saha, R., et al. (2024) · Cluster Computing · doi:10.1007/s10586-024-04527-y · Cited by 7
“The decryption of TLS in network security monitoring devices impacts network performance, high-lighting the need for advanced security detection methods beyond signature-based approaches, as noted by Dhirani [7].”
Cybersecurity Risks in Meat Processing Plant and Impacts on Total Productive Maintenance
Chundhoo, V., Chattopadhyay, G., Karmakar, G., & Kahandawa, G. C. (2021) · International Conference on Maintenance and Intelligent Asset Management (ICMIAM) · doi:10.1109/icmiam54662.2021.9715193 · Cited by 12
Review of Fuzzy Methods Application in IIoT Security—Challenges and Perspectives
Krzysztoń, E., Mikołajewski, D., & Prokopowicz, P. (2025) · Electronics · doi:10.3390/electronics14173475 · Cited by 14
Cyber Physical Systems Security: Bridging Privacy, Verification, Intelligence, and Forensics
Ramya, K., Rath, S., Venkataraman, P., & Kumar, R. (2026) · IEEE Access · doi:10.1109/access.2026.3668412 · Cited by 11
“Despite progress, systemic and standardization issues in CPS remain unresolved 1) Although baseline standards like ISO/IEC 27001 exist, they do not consider the unique properties of CPS, such as real time operation and safety critical dependencies [196], [205].”
Yamcharoen, P., Folorunsho, O. S., Bayewu, A., et al. (2023) · Advances in Multidisciplinary & Scientific Research Journal Publication · doi:10.22624/aims/cisdi/v14n1p2 · Cited by 6
Vedapradha, R., Joshi, D., & Ravi, H. (2024) · The International Journal of Logistics Management · doi:10.1108/ijlm-12-2023-0509 · Cited by 6
IoT – Assets Taxonomy, Threats Assessment and Potential Solutions
Zardari, S., Nisar, N., Fatima, Z., & Dhirani, L. L. (2023) · Global Conference on Wireless and Optical Technologies (GCWOT) · doi:10.1109/gcwot57803.2023.10064657 · Cited by 9
Self-citationSEADETEC: Advanced Service for Early Detection of Cybersecurity Events
Domínguez-Jiménez, J. J., Gómez Sánchez, R., Medina‐Bulo, I., et al. (2025) · Procedia Computer Science · doi:10.1016/j.procs.2025.07.087 · Cited by 5
Unraveling the Threat Landscape of CPS: Modbus TCP Vulnerabilities in the Era of I4.0
Lazaridis, G., Drosou, A., Chatzimisios, P., & Tzovaras, D. K. (2024) · IEEE International Conference on Cyber Security and Resilience (CSR) · doi:10.1109/csr61664.2024.10679453 · Cited by 8
“U) NIS Directive [17], a directive on security of network and information systems adopted on July 2016, its successor NIS2 [18], IEC 62443 [19] - ISO/IEC 27001 standards [20] provide a structured approach to managing and reducing cybersecurity risks.”
BackgroundHan, X., & Chen, X. (2025) · Scientific Reports · doi:10.1038/s41598-025-99777-0 · Cited by 4
Eryılmaz, E. E., Akleylek, S., Ertek, Y., & Kılıç, E. (2024) · MANAS Journal of Engineering · doi:10.51354/mjen.1197753 · Cited by 7
Security Principles in Smart and Agile Cybersecurity for IoT and IIoT Environments
Alshra’a, A. S., Sardy, L. A., Dibaei, M., & German, R. (2024) · Advances in information security, privacy, and ethics book series · doi:10.4018/979-8-3693-3451-5.ch001 · Cited by 4
Federated Learning Models for Intrusion Detection in Industrial IoT Networks
Prasad, S., Sharma, I., & RajendraPrasad, D. (2024) · International Conference on Circuit, Power and Computing Technologies · doi:10.1109/iccpct61902.2024.10672938 · Cited by 4
“Application of IIoT spans across various industries, including manufacturing, energy, transportation, healthcare, agriculture, and logistics [2].”
BackgroundExposing the Gaps: The State of Supply Chain Coverage in Current Security Standards
Mexis, N., Lill, B., Doleh, Y., & Katzenbeisser, S. (2025) · IFIP advances in information and communication technology · doi:10.1007/978-3-031-94924-1_14 · Cited by 5
An Improved Support Vector Machine Attack Detection Algorithm for Industry Controls System
Cui, S., & Feng, D. (2023) · IEEE International Conference on Power, Electronics and Computer Applications (ICPECA) · doi:10.1109/icpeca56706.2023.10076096 · Cited by 5
“Therefore, threats from external networks to ICS are increasing [1].”
BackgroundSecuring industry 5.0 using 6σ CYBERNETIC framework
Dhirani, L. L., & Newe, T. (2024) · Mehran University Research Journal of Engineering and Technology · doi:10.22581/muet1982.3202 · Cited by 14
Self-citationRobust Attack Detection Framework Using Pretrained CNN Model for the Edge Industrial IoT Networks
Alablani, I. A., & Alenazi, M. J. F. (2025) · Concurrency and Computation Practice and Experience · doi:10.1002/cpe.70206 · Cited by 3
BASHIR, S., Ahmad, M. W., Khan, Z. A., Zaman, T. U., Javaid, M., & Haleem, A. (2025) · Cure & Care · doi:10.1016/j.ccwv.2025.100008 · Cited by 3
Govindarajan, V., Ahmed, F., Faheem, Z. B., Bilal, M., Ayadi, M. F., & Ali, J. (2026) · ACM Transactions on Autonomous and Adaptive Systems · doi:10.1145/3787224 · Cited by 4
“Cyber-attacks on these IoT systems are highly risky [11], from data breaches to extreme industrial process disruptions.”
Post-Quantum Security Measures for the Internet of Things
Şafak, I., Alagöz, F., & Anarım, E. (2024) · Advances in information quality and management · doi:10.4018/978-1-6684-7366-5.ch075 · Cited by 5
I2DS: FPGA-Based Deep Learning Industrial Intrusion Detection System
Morianos, I., Georgopoulos, K., Brokalakis, A., Kyriakakis, T., & Ioannidis, S. (2025) · Lecture notes in computer science · doi:10.1007/978-3-031-78380-7_14 · Cited by 3
Artificial Intelligence Based Threat Detection in Industrial Internet of燭hings燛nvironment
Alruwaili, F. F. (2022) · Computers, materials & continua/Computers, materials & continua (Print) · doi:10.32604/cmc.2022.031613 · Cited by 3
A New Cybersecurity Assessment Framework for Private Networks
Alshehri, S., Alaidaros, H., Arafah, M., et al. (2022) · International Conference on Computational Intelligence and Communication Networks (CICN) · doi:10.1109/cicn56167.2022.10008317 · Cited by 3
“Six benchmark levels for these states are given in the following [13], [14].”
BackgroundArtificial Intelligence f or Cybersecurity in IoT-enabled Avionics: Challenges and Solutions
Mallah, R. A., Halabi, T., Alja’afreh, M., & Karime, A. (2022) · IEEE World Forum on Internet of Things (WF-IoT) · doi:10.1109/wf-iot54382.2022.10152241 · Cited by 3
“The research study in [11] provides an understanding of various standards of cybersecurity, a discussion of best practices, and a roadmap for implementing those standards and techniques for safeguarding M2M communications in IIoT.”
BackgroundDetecting Anomalies in Industrial Control Systems with LSTM Neural Networks and UEBA
Piñón-Blanco, C., Otero-Vázquez, F., Ortega-Fernandez, I., & Sestelo, M. (2023) · doi:10.23919/jnic58574.2023.10205609 · Cited by 4
“The proposed approach is based on the underlying assumption that both active cyber and physical threats tend to have a discernible impact on the normal functioning of the system, which may be detected by monitoring certain system variables [11].”
BackgroundSecurity Analysis of the Module Type Package Concept
Madsen, M., Palmin, A., Stutz, A., & Barth, M. (2023) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin51400.2023.10218151 · Cited by 3
Yarmilko, A., Розломій, І., & Naumenko, S. (2024) · Lecture notes on data engineering and communications technologies · doi:10.1007/978-3-031-71804-5_16 · Cited by 3
Tanyıldız, H., Şahin, C. B., & Dinler, Ö. B. (2024) · Applied Sciences · doi:10.3390/app14209287 · Cited by 4
Ileana, M., Oproiu, M. I., & Marian, C. V. (2024) · Advanced Topics on Measurement and Simulation (ATOMS) · doi:10.1109/atoms60779.2024.10921554 · Cited by 5
“This predictive capability is achieved by analyzing data collected by various sensors that can identify patterns and anomalies that indicate potential problems [6].”
Cyber Security for Internet of Things
Gupta, S., Nikam, V., Mukadam, T., et al. (2022) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2022.46981 · Cited by 3
AI Driven Cybersecurity for Industrial IoT Networks: Challenges, Innovations, and Future Directions
Khan, Z. U., Taj, S., Khan, F., Jamil, T., Aman, M., & Khan, J. A. (2025) · Advances in computational intelligence and robotics book series · doi:10.4018/979-8-3373-0583-7.ch003 · Cited by 4
Evaluating IoT Data Security Metrics and Emerging Trends
Taherdoost, H., Mohamed, N. A., & Farhaoui, Y. (2025) · International Journal of Service Science Management Engineering and Technology · doi:10.4018/ijssmet.388708 · Cited by 5
Residual temporal CNNs for emerging cyber threat detection in healthcare IoT
Khatun, M. A., Eising, C., & Dhirani, L. L. (2026) · Discover Internet of Things · doi:10.1007/s43926-025-00271-w · Cited by 5
Self-citationAnn, S., Kim, H. J., Park, S., Cho, S.-J., Kim, J., & Cho, H. (2026) · Electronics · doi:10.3390/electronics15020371 · Cited by 3
BBNAC: Blockchain Based Network Access Control for IT/OT Infrastructures
Korkuç, Ç., Genç, Y., Dogantuna, T., Afacan, E., & Dener, M. (2026) · Journal of Network and Systems Management · doi:10.1007/s10922-026-10033-w · Cited by 2
“These threats affect not only the field of information technologies (IT) but also operational technologies (OT) [3, 4].”
Metadata
- Authors
- Dhirani, L. L., Armstrong, E., & Newe, T.
- Affiliations
- University of Limerick (IE)
- Corresponding author
- Dhirani, Lubna Luxmi
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2021-06-05
- Volume
- 21
- Issue
- 11
- Pages
- 3901
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC8200965
- OpenAlex
- W3167618552
- Semantic Scholar
- 3bb2ae803b96dbd05f1840e0b2707838bcdbd25e
- Cited by
- 172
- References
- 57
- Citations by year
- 2026: 32 · 2025: 37 · 2024: 32 · 2023: 34 · 2022: 31 · 2021: 6
- FWCI
- 2.40
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Arrow@dit (Dublin Institute of Technology) (acceptedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion, cc-by-nc-sa)
- University of Limerick Institutional Repository (University of Limerick) (submittedVersion, cc-by-nc-sa)
- Funders
- Science Foundation Ireland (16/RC/3918)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Computer Science › Computer Networks and Communications › IoT and Edge/Fog Computing
- Physical Sciences › Computer Science › Information Systems › Information and Cyber Security
- Keywords
- Industrial Internet of Things, cyber threats, cybersecurity standards, interoperability, IT-OT convergence, industrial control systems, machine-to-machine communication, 5G, time-sensitive networking, self-driving networks, vulnerability assessment, risk assessment, Industry 4.0
- MeSH terms
- Automobile Driving, Industry, Reference Standards, Technology, Computer Security
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.