Mapping of Industrial IoT to IEC 62443 Standards
Open accessThe DOI matches its Crossref record; 99 of the 99 references it cites were found in a registry or an index; 17 of the 54 sources its claims cite were checked for support.
Abstract
This paper examines the applicability of the ISA/IEC 62443 series of standards, traditionally used for securing industrial automation and control systems, to the IIoT environment. For each requirement described in the ISA/IEC 62443 standards, relevant research on that subject is reviewed and presented in a table-like manner. Based on this table, areas for future research are identified, including system hardening, asset inventory, safety instrumented system isolation, risk assessment methodologies, change management systems, data storage security, and incident response procedures.
Overview
CoChat Summary
## TL;DR
This paper maps IEC/ISA 62443 requirements onto the Industrial IoT (IIoT), reviewing research for each requirement and judging whether it applies to IIoT. It concludes that most requirements do apply, but important gaps remain, especially for hardening.
## Key findings
- The paper found that 83 papers were relevant after screening 107 documents; 89 met the initial criteria, and those 83 were analyzed in detail.
- It concludes that most IEC 62443 requirements are applicable to IIoT, but there are still significant gaps because IIoT has low-power devices, many more devices than standard IACS environments, and common use of cloud/edge/AI technologies.
- The paper identifies future research needs in system hardening, asset inventory, safety instrumented system isolation, risk assessment methodologies, change management systems, data storage security, and incident response procedures.
- The authors state that hardening is one of the most critical areas needing further research and that there is no comprehensive guide or framework found for fully hardening an IIoT environment.
## Methods
- The study performs a requirement-by-requirement mapping of the ISA/IEC 62443 series onto IIoT, using the IEC 62443 requirements as the basis and expanding across the available parts of the series.
- The literature search used Google Scholar, IEEE Xplore, ScienceDirect, SpringerLink, ResearchGate, and MDPI; search terms combined IIoT synonyms with each requirement area.
- For each requirement, the authors reviewed relevant research and presented it in a table-like manner to assess both research coverage and applicability to IIoT.
## Limitations
- The paper states that no specific standard for IIoT exists to date, so the mapping is done against an OT-focused standard rather than an IIoT-native one.
- It also notes that many IEC 62443 requirements are broad or only partially adaptable to IIoT, and some areas remain insufficiently researched; these are stated in the paper.
- Evident from the text: the review is based on a literature-based mapping, not an experimental validation or deployment study; this is not explicitly framed as a limitation by the authors, but it follows from the method used.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
Verification
Claims the paper makes
17 Valid · 10 Not valid · 32 Not checked · 63 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Several risk analysis methods commonly used in regular IT systems have proven to be insufficient for IIoT environments.”
§ Mapping of Industrial IoT to IEC 62443 Standards > 5. Mapping IEC 62443 Requirements onto IIoT > 5.3. Risk Assessment
What the sources say
- Partly supportedcites [38] Hassani, 2021, Vulnerability and security risk assessment in a IIoT environment in compliance with standard IEC 62443, Procedia Comput. Sci. sourceExperimental — accuracy not yet measured
The Introduction identifies EBIOS and MEHARI as risk-analysis methods designed for information systems and describes IEC 62443 as specific to industrial cybersecurity. It does not say that those methods have proven insufficient for IIoT environments; the Proposed Evaluation Model (§3.1) even adopts steps described as common to information-system risk methods. No page numbers are available in our copy. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Traditional asset management methods for conventional IT systems are difficult to implement for IIoT systems due to the variety of network protocols, devices, and technologies involved.”
§ Mapping of Industrial IoT to IEC 62443 Standards > 5. Mapping IEC 62443 Requirements onto IIoT > 5.1. Asset Inventory
What the sources say
- Supportedcites [43] Matsumoto, N., Fujita, J., Endoh, H., Yamada, T., Sawada, K., and Kaneko, O. (2021). Asset Management Method of Industrial IoT Systems for Cyber-Security Countermeasures. Information, 12. source
The Abstract directly says that asset management methods used for conventional IT systems are difficult to implement for IIoT systems because IIoT systems comprise various network protocols, devices, and open technologies. The claim accurately paraphrases that statement. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“One of the biggest identified risks for this type of environment is the fact that IoT devices have no or limited authentication capability.”
§ Mapping of Industrial IoT to IEC 62443 Standards > 5. Mapping IEC 62443 Requirements onto IIoT > 5.3. Risk Assessment
What the sources say
- Partly supportedcites [38] Hassani, 2021, Vulnerability and security risk assessment in a IIoT environment in compliance with standard IEC 62443, Procedia Comput. Sci. sourceExperimental — accuracy not yet measured
Section 3.2 (Testbed; page unavailable) reports absent or weak authentication in several zones, and Table 5 rates unauthorized access as a very important risk in Zone 1. But these are findings about authentication implemented in this testbed, not evidence that IoT devices generally lack authentication capability; the same section describes hardened authentication in Zone 4. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Hassani et al. [38] only focus on two parts of the IEC 62443 series, namely IEC 62443-3-2 and IEC 62443-4-2.”
§ Mapping of Industrial IoT to IEC 62443 Standards > 4. Related Work
What the sources say
- Supportedcites [38] Hassani, 2021, Vulnerability and security risk assessment in a IIoT environment in compliance with standard IEC 62443, Procedia Comput. Sci. source
The Abstract (page unavailable) says the authors’ proposed approach is based on IEC 62443-3-2 and IEC 62443-4-2. The mention of IEC 62443-3-3 in Related works describes another paper, not an additional basis for Hassani et al.’s approach. (LLM, conf=0.91)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“However, complete separation in a modern IIoT environment is not possible [76].”
§ Mapping of Industrial IoT to IEC 62443 Standards > 5. Mapping IEC 62443 Requirements onto IIoT > 5.9. Safety Instrumented Systems
What the sources say
- Supportedcites [76] Onshus, 2022, Security and Independence of Process Safety and Control Systems in the Petroleum Industry, J. Cybersecur. Priv. source
Section 6.2, “New Dependencies and Links,” says that even a dedicated safety network has connection points and cannot fully protect safety-related information because communication over shared networks is needed. It also says that network segmentation does not guarantee full independence, while IIoT solutions add links across zones. This supports the claim as a paraphrase about connected modern systems. (LLM, conf=0.88)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
15 more claims
Create a free account to see all 122 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 35
- Probably not a substantial claim. 88
Citations
Cites
The industrial internet of things (IIoT): An analysis framework
Boyes, H., Hallaq, B., Cunningham, J., & Watson, T. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.04.015 · Cited by 1,486 · cited 1×
“Boyes et al. [70] use the Purdue model to divide the IIoT into logical zones through the use of firewalls and conduits based on factors such as device location, connectivity, and functionality.”
Guide to Industrial Control Systems (ICS) Security
Stouffer, K., Pillitteri, V., Lightman, S., Abrams, M., & Hahn, A. (2015) · doi:10.6028/nist.sp.800-82r2 · Cited by 1,377 · cited 6×
“High availability is a critical requirement that requires, among other things, thorough pre-deployment testing as well as planned testing [20].”
InfluentialA survey of intrusion detection in Internet of Things
Zarpelão, B. B., Miani, R. S., Kawakani, C. T., & de Alvarenga, S. C. (2017) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2017.02.009 · Cited by 1,022
Blockchain-Assisted Secure Device Authentication for Cross-Domain Industrial IoT
Shen, M., Liu, H., Zhu, L., Xu, K., Yu, H., Du, X., & Guizani, M. (2020) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2020.2980916 · Cited by 411 · cited 1×
“To avoid having to rely on a third-party certificate authority, Shen et al. [98] use a blockchain-based authentication and key agreement mechanism called BASA (Blockchain-Assisted Secure Authentication).”
Cybersecurity for industrial control systems: A survey
Bhamare, D., Zolanvari, M., Erbad, A., Jain, R., Khan, K., & Meskin, N. (2020) · Computers & Security · doi:10.1016/j.cose.2019.101677 · Cited by 394 · cited 1×
“However, it is considered the least important of the three, especially when the data in question are only sensor data that are processed by the SCADA (Supervisory Control and Data Acquisition) system [19].”
A survey on internet of things security: Requirements, challenges, and solutions
HaddadPajouh, H., Dehghantanha, A., M. Parizi, R., Aledhari, M., & Karimipour, H. (2021) · Internet of Things · doi:10.1016/j.iot.2019.100129 · Cited by 368 · cited 4×
“Availability deficiencies may often be tolerated, depending on the specific use of the system [16].”
InfluentialChallenges and Opportunities in Securing the Industrial Internet of Things
Serror, M., Hack, S., Henze, M., Schuba, M., & Wehrle, K. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3023507 · Cited by 362 · cited 1×
“Serror et al. [91] warn that there may be many long-lived legacy components and an increasing number of devices.”
Iqbal, W., Abbas, H., Daneshmand, M., Rauf, B., & Bangash, Y. A. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.2997651 · Cited by 356 · cited 5×
“Downtime can lead to interruptions and operational inefficiencies [17].”
InfluentialInternet of Things intrusion detection systems: a comprehensive review and future directions
Heidari, A., & Jabraeil Jamali, M. A. (2023) · Cluster Computing · doi:10.1007/s10586-022-03776-z · Cited by 340 · cited 1×
“Analyzing encryption without breaking the encryption is important in a network with a large number of edge devices, such as an IIoT network [110,111].”
Trustworthiness in Industrial IoT Systems Based on Artificial Intelligence
Lv, Z., Han, Y., Singh, A. K., Manogaran, G., & Lv, H. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2994747 · Cited by 320 · cited 1×
“Cyber-physical systems are becoming increasingly connected through the integration of more and more IIoT devices, and, therefore, the physical world can be affected by digital problems, as Lyu et al. [56] state.”
Fu, J.-S., Liu, Y., Chao, H.-C., Bhargava, B. K., & Zhang, Z.-J. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2793350 · Cited by 281 · cited 1×
“Fu et al. [82] describe securing data in cloud and fog computing environments.”
Industrial Control Systems: Cyberattack trends and countermeasures
Alladi, T., Chamola, V., & Zeadally, S. (2020) · Computer Communications · doi:10.1016/j.comcom.2020.03.007 · Cited by 265 · cited 4×
“Confidentiality is important when the system contains proprietary data, personal information, and critical operational data [18].”
InfluentialRadanliev, P., Roure, D. D., Page, K., Nurse, J. R. C., Montalvo, R. M., Santos, O., Maddox, L., & Burnap, P. (2020) · Cybersecurity · doi:10.1186/s42400-020-00052-8 · Cited by 225 · cited 1×
“Radanliev et al. [51] emphasize that supply-chain security should be considered in risk assessment.”
Cyber Threats to Industrial IoT: A Survey on Attacks and Countermeasures
Tsiknas, K., Taketzis, D., Demertzis, K., & Skianis, C. (2021) · IoT · doi:10.3390/iot2010009 · Cited by 196 · cited 2×
“The documents mentioned earlier state that the security of wireless devices can be improved through the use of SDN, encryption, intrusion detection systems, secure communication standards, and the separation of wireless devices from wired devices through zones and conduits [52,63,71–73].”
Industrial IoT, Cyber Threats, and Standards Landscape: Evaluation and Roadmap
Dhirani, L. L., Armstrong, E., & Newe, T. (2021) · Sensors · doi:10.3390/s21113901 · Cited by 172 · cited 5×
“Companies may rely too much on compliance with the standards instead of actively managing security risks [3].”
InfluentialGyamfi, E., & Jurcut, A. (2022) · Sensors · doi:10.3390/s22103744 · Cited by 171 · cited 1×
“Analyzing encryption without breaking the encryption is important in a network with a large number of edge devices, such as an IIoT network [110,111].”
Secure Multifactor Authenticated Key Agreement Scheme for Industrial IoT
Vinoth, R., Deborah, L. J., Vijayakumar, P., & Kumar, N. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3024703 · Cited by 161 · cited 2×
“To deal with the resource constraints of IIoT devices, R. et al. [104] propose the use of multi-factor authentication that combines passwords, biometrics, and smart cards to identify users and devices.”
Yu, K., Tan, L., Yang, C., Choo, K. R., Bashir, A. K., Rodrigues, J. J. P. C., & Sato, T. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3125190 · Cited by 161 · cited 1×
“Yu et al. [116] propose STCCHain, which uses the Shamir threshold to split private keys into encrypted fragments that are stored across blockchain nodes.”
Kandasamy, K., Srinivas, S., Achuthan, K., & Rangan, V. P. (2020) · EURASIP Journal on Information Security · doi:10.1186/s13635-020-00111-0 · Cited by 160 · cited 1×
“Kandasamy et al. [54] warn that regular assessments of IoT systems have their limitations due to the drastic changes that can take place in such a system in a short period.”
Alotaibi, B. (2023) · doi:10.20944/preprints202307.0771.v1 · Cited by 128 · cited 2×
“Therefore, maintaining uptime and data accuracy has traditionally taken precedence over data confidentiality [10,11].”
Cybersecurity and privacy in standards for smart grids – A comprehensive survey
Leszczyna, R. (2017) · Computer Standards & Interfaces · doi:10.1016/j.csi.2017.09.005 · Cited by 118 · cited 1×
“Finally, even a combination of several standards may not be able to fully meet the specific needs of the industry [7].”
Cybersecurity for Industrial IoT (IIoT): Threats, countermeasures, challenges and future directions
Mekala, S. H., Baig, Z., Anwar, A., & Zeadally, S. (2023) · Computer Communications · doi:10.1016/j.comcom.2023.06.020 · Cited by 111 · cited 5×
“Mitigation is accomplished by isolating compromised devices, using automated threat response mechanisms, updating firmware and software, encrypting communications, access control mechanisms, and updating systems based on lessons learned from incidents [4,16,17,20,21].”
InfluentialFan, K. G., Bao, Z., Liu, M., Vasilakos, A. V., & Shi, W. (2019) · Future Generation Computer Systems · doi:10.1016/j.future.2019.10.014 · Cited by 110 · cited 1×
“To ensure data integrity, Fan et al. [58] developed Dredas, a decentralized, reliable, and efficient audit system for outsourced data.”
Threat modeling of industrial control systems: A systematic literature review
Khalil, S. M., Bahşi, H., & Korõtko, T. (2023) · Computers & Security · doi:10.1016/j.cose.2023.103543 · Cited by 102 · cited 1×
“Therefore, maintaining uptime and data accuracy has traditionally taken precedence over data confidentiality [10,11].”
Lara, E., Aguilar, L., Sanchez, M. A., & García, J. A. (2020) · Sensors · doi:10.3390/s20020501 · Cited by 96 · cited 1×
“Lara et al. [97] propose the use of the Lightweight Authentication and Key Distribution (LAKD) protocol, which was developed specifically for resource-constrained IIoT devices.”
Evolving techniques in cyber threat hunting: A systematic review
Mahboubi, A., Luong, K., Aboutorab, H., Bui, H. T., Jarrad, G., Bahutair, M., Camtepe, S., Pogrebna, G., Ahmed, E., Barry, B., et al. (2024) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2024.104004 · Cited by 94 · cited 1×
“Machine learning techniques are used to detect abnormal traffic within a network [4,17,20,21,23].”
Physical Security and Safety of IoT Equipment: A Survey of Recent Advances and Opportunities
Yang, X., Shu, L., Liu, Y., Hancke, G. P., Ferrag, M. A., & Huang, K. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3141408 · Cited by 93 · cited 1×
“Yang et al. [78] categorize physical threats and discuss possible countermeasures.”
A Study on Security and Privacy Guidelines, Countermeasures, Threats: IoT Data at Rest Perspective
Abdulghani, H. A., Nijdam, N. A., Collen, A., & Konstantas, D. (2019) · Symmetry · doi:10.3390/sym11060774 · Cited by 87 · cited 1×
“Abdulghani et al. [79] provide a framework for data at rest.”
Applicability of the IEC 62443 standard in Industry 4.0 / IIoT
Leander, B., Čaušević, A., & Hansson, H. (2019) · Proceedings of the 14th International Conference on Availability, Reliability and Security · doi:10.1145/3339252.3341481 · Cited by 82 · cited 2×
“Leander et al. [41] examine how the IEC 62443 standard can be applied to IIoT environments.”
Sabillón, R., Serra-Ruiz, J., Cavaller, V., et al. (2017) · International Conference on Information Systems and Computer Science (INCISCOS) · doi:10.1109/inciscos.2017.20 · Cited by 82 · cited 1×
“The CSAM was proposed by Sabillon et al. [57].”
Accurate threat hunting in industrial internet of things edge devices
Yazdinejad, A., Zolfaghari, B., Dehghantanha, A., Karimipour, H., Srivastava, G., & Parizi, R. M. (2022) · Digital Communications and Networks · doi:10.1016/j.dcan.2022.09.010 · Cited by 82 · cited 1×
“Maintaining confidentiality is difficult in Industrial IoT environments because devices do not have the computing power and security features required for adequate confidentiality [15].”
Industrial IoT Monitoring: Technologies and Architecture Proposal
Raposo, D., Rodrigues, A., Sinche, S., Silva, J. S., & Boavida, F. (2018) · Sensors · doi:10.3390/s18103568 · Cited by 81 · cited 1×
“To secure an industrial wireless sensor network (IWSN), Raposo et al. [74] propose a flexible, cross-standard monitoring architecture that minimizes the burden on sensor node resources and leverages already-available network metrics and widely used management standards.”
Data security storage mechanism based on blockchain industrial Internet of Things
Wang, J., Chen, J., Ren, Y., Sharma, P. K., Alfarraj, O., & Tolba, A. K. R. (2021) · Computers & Industrial Engineering · doi:10.1016/j.cie.2021.107903 · Cited by 79 · cited 1×
“To ensure the integrity and confidentiality of data, both they and Wang et al. [80] suggest the use of blockchain-based technology.”
Requirements for Testing and Validating the Industrial Internet of Things
Antão, L., Pinto, R., Reis, J., & Gonçalves, G. (2018) · IEEE International Conference on Software Testing, Verification and Validation Workshops (ICSTW) · doi:10.1109/icstw.2018.00036 · Cited by 70 · cited 1×
“To test critical functions in an IIoT environment, Antão et al. [119] propose using established methods such as hardware-in-the-loop (HiL) testing and adapting them to IIoT environments.”
Developing a Security Testbed for Industrial Internet of Things
Al-Hawawreh, M., & Sitnikova, E. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3032093 · Cited by 69 · cited 1×
“Al-Hawawreh and Sitnikovas [117] provide a test environment that mimics real industrial environments, called the Brown-IIoTbed.”
Security Issues and Software Updates Management in the Industrial Internet of Things (IIoT) Era
Mugarza, I., Flores, J. L., & Montero, J. L. (2020) · Sensors · doi:10.3390/s20247160 · Cited by 65 · cited 2×
“Mugarza et al. [49] propose a structured patch lifecycle model for testing, approval, and installation that is compatible with IEC 62443.”
Dataflow Management in the Internet of Things: Sensing, Control, and Security
Wei, D., Ning, H., Shi, F., Wan, Y., Xu, J., Yang, S., & Zhu, L. (2021) · Tsinghua Science & Technology · doi:10.26599/tst.2021.9010029 · Cited by 64 · cited 1×
“To ensure the security of the data flow, Wei et al. [81] propose the use of mechanisms such as Information Flow Control (IFC), where the data sent are tagged with administrative flags to control who can access the data.”
Securing IIoT using Defence-in-Depth: Towards an End-to-End secure Industry 4.0
Mosteiro-Sanchez, A., Barcelo, M., Astorga, J., & Urbieta, A. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.10.011 · Cited by 64 · cited 1×
“One of the biggest problems with applying security to OT systems is that they often contain legacy devices that either do not support security features such as authentication, encryption, and monitoring, do not have them, or are underpowered, according to Mosteiro-Sanchez et al. [62].”
Understanding IoT Systems: A Life Cycle Approach
Rahman, L. F., Özçelebi, T., & Lukkien, J. J. (2018) · Procedia Computer Science · doi:10.1016/j.procs.2018.04.148 · Cited by 60 · cited 1×
“Rahman et al. [121] provide guidelines for the proper decommissioning of a device.”
Kebande, V. R. (2022) · Forensic Science International Reports · doi:10.1016/j.fsir.2022.100257 · Cited by 58
Benis, A., Nelke, S. A., & Winokur, M. (2021) · Sensors · doi:10.3390/s21092905 · Cited by 57 · cited 1×
“Benis et al. [94] emphasize the need for continuous learning and updating the curriculum taught to students.”
Bi, J., He, S., Luo, F., Meng, W., Ji, L., & Huang, D.-W. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3231406 · Cited by 41 · cited 1×
“Bi et al. [109] evaluate defense strategies based on the total system loss and total cost of the defender.”
Access Control in the Industrial Internet of Things
Salonikias, S., Gouglidis, A., Mavridis, I. K., & Gritzalis, D. (2019) · Advanced sciences and technologies for security applications · doi:10.1007/978-3-030-12330-7_5 · Cited by 37
Automated Microsegmentation for Lateral Movement Prevention in Industrial Internet of Things (IIoT)
Arifeen, M., Petrovski, A., & Petrovski, S. (2021) · International Conference on Security of Information and Networks (SIN) · doi:10.1109/sin54109.2021.9699232 · Cited by 36 · cited 1×
“Since micro-segmentation has advantages but is a complicated process, Arifeen et al. [66] propose to automate it using the OPTICS (Ordering Points To Identify the Clustering Structure) clustering algorithm based on traffic patterns.”
Hassani, H. L., Bahnasse, A., Martin, E., Roland, C., Bouattane, O., & Mehdi Diouri, M. E. (2021) · Procedia Computer Science · doi:10.1016/j.procs.2021.07.008 · Cited by 35 · cited 2×
“Hassani et al. [38] only focus on two parts of the IEC 62443 series, namely IEC 62443-3-2 and IEC 62443-4-2.”
Nakamura, E. T., & Ribeiro, S. L. (2018) · Global Internet of Things Summit (GIoTS) · doi:10.1109/giots.2018.8534521 · Cited by 33 · cited 1×
“Nakamura and Ribeiro [50] propose a risk assessment that considers security, integrity, and reliability to calculate risks.”
Cybersecurity Model Based on Hardening for Secure Internet of Things Implementation
Echeverría, A., Cevallos, C., Ortiz-Garces, I., & Andrade, R. O. (2021) · Applied Sciences · doi:10.3390/app11073260 · Cited by 31
Data security storage model for fog computing in large-scale IoT application
He, S., Cheng, B. H., Wang, H., Xiao, X., Cao, Y., & Chen, J. (2018) · IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS) · doi:10.1109/infcomw.2018.8406927 · Cited by 30 · cited 1×
“The Fog Computing Security Storage Model (FCDSSM) proposed by He et al. [106] secures the storage of data in fog nodes.”
An Overview of Secure Network Segmentation in Connected IIoT Environments
Baligodugula, V. V., Ghimire, A., & Amsaad, F. (2024) · Computing&AI Connect · doi:10.69709/caic.2024.193182 · Cited by 30
Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities
Maximilian, L., Markl, E., & Mohamed, A. S. (2018) · Journal of Information Technology & Software Engineering · doi:10.4172/2165-7866.1000250 · Cited by 27 · cited 2×
“Lackner et al. [46] note that a lack of professionals covering such a range of expertise is a challenge.”
Aman, M. N., Javaid, U., & Sikdar, B. (2021) · IEEE Systems Journal · doi:10.1109/jsyst.2021.3070404 · Cited by 27 · cited 1×
“According to Aman et al. [92], the testing of applied patches is crucial.”
A Survey on Verification of Security and Safety in IoT Systems
Abuserrieh, L., & Alalfi, M. H. (2024) · IEEE Access · doi:10.1109/access.2024.3413071 · Cited by 26 · cited 1×
“Abuserrieh and Alalfi [77] provide an overview of existing technologies and mechanisms for safety and protection.”
Goto, S., Yoshie, O., & Fujimura, S. (2017) · IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) · doi:10.1109/ieem.2017.8289864 · Cited by 24
A Fault-Tolerant Transmission Scheme in SDN-Based Industrial IoT (IIoT) over Fiber-Wireless Networks
Zhou, Q., Zhao, T., Chen, X., Zhong, Y., & Luo, H. (2022) · Entropy · doi:10.3390/e24020157 · Cited by 24 · cited 1×
“To deal with faults within a system, Zhou et al. [83] developed a fault-tolerant transmission mechanism for SDN-based IIoT fiber-optic networks.”
An Efficient Intrusion Detection Framework for Industrial Internet of Things Security
AlShathri, S. I., El‐Sayed, A., El‐Shafai, W., & Hemdan, E. E. (2023) · Computer Systems Science and Engineering · doi:10.32604/csse.2023.034095 · Cited by 24 · cited 1×
“The documents mentioned earlier state that the security of wireless devices can be improved through the use of SDN, encryption, intrusion detection systems, secure communication standards, and the separation of wireless devices from wired devices through zones and conduits [52,63,71–73].”
Internet of Things in Asset Management: Insights from Industrial Professionals and Academia
Kinnunen, S.-K., Ylä-Kujala, A., Marttonen-Arola, S., Kärri, T., & Baglee, D. (2018) · International Journal of Service Science, Management, Engineering, and Technology · doi:10.4018/ijssmet.2018040105 · Cited by 24
Industrial Internet of Things: Trends and Challenges
Serpanos, D. (2024) · Computer · doi:10.1109/mc.2023.3331552 · Cited by 23 · cited 3×
“The IIoT market as a whole is expected to exceed USD one trillion within the next three to five years [1].”
Scarfone, K. A., Benigni, D. R., & Grance, T. (2008) · Wiley Handbook of Science and Technology for Homeland Security · doi:10.1002/9780470087923.hhs439 · Cited by 22 · cited 2×
“As defined in the NIST (National Institute of Standards and Technology) book Cyber Security Standards , “A cybersecurity standard is a document that defines both the functional and security requirements for a product, system, process, or technology environment” [5].”
IoT-based Application of Information Security Triad
Reshan, M. S. A. (2021) · International Journal of Interactive Mobile Technologies (iJIM) · doi:10.3991/ijim.v15i24.27333 · Cited by 22 · cited 1×
“The CIA triad consists of three basic security requirements against which a system can be assessed: confidentiality, integrity, and availability [9].”
Laszka, A., Abbas, W., Vorobeychik, Y., & Koutsoukos, X. (2020) · Cyber-Physical Systems · doi:10.1080/23335777.2019.1624620 · Cited by 22 · cited 1×
“Laszka et al. [107] use a layered approach to system hardening that includes redundancy, diversity, secure coding, firewalls, and penetration testing.”
Bhanji, S., Shotz, H., Tadanki, S. R., et al. (2021) · ASME/IEEE Joint Rail Conference (JRC) · doi:10.1115/jrc2021-58346 · Cited by 20 · cited 1×
“Bhanji et al. [45] emphasize the importance of connections within systems and note that current technologies cannot predict how a single device will affect the entire system.”
Industrial CyberSecurity 4.0: Preparing the Operational Technicians for Industry 4.0
Κarampidis, K., Panagiotakis, S., Vasilakis, M., Markakis, E., & Papadourakis, G. M. (2019) · IEEE International Workshop on Computer Aided Modeling and Design of Communication Links and Networks (CAMAD) · doi:10.1109/camad.2019.8858454 · Cited by 19 · cited 1×
“Karampidis et al. [93] note that there is a shortage of technical staff in the labor market who are familiar with both cyber risks and operational requirements.”
Wireless Networks and Industrial IoT
Al-Ahmed, S. A., Ahmed, T., Zhu, Y., et al. (2020) · Springer eBooks · doi:10.1007/978-3-030-51473-0 · Cited by 19
Shaaban, A. M., Chlup, S., El-Araby, N., & Schmittner, C. (2022) · Applied Sciences · doi:10.3390/app12115653 · Cited by 18 · cited 1×
“Shaaban et al. [42] propose a novel algorithm to optimize the security measures for IoT devices in smart agriculture.”
Application of IEC 62443 for IoT Components
Shaaban, A. M., Kristen, E., & Schmittner, C. (2018) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-99229-7_19 · Cited by 16 · cited 1×
“Shaaban et al. [40] show how the concept of zones and conduits, normally used at the system level, can be applied at the component level to improve security.”
Role-based visualization of industrial IoT-based systems
Mahmoodpour, M., Lobov, A., Lanz, M., Makela, P., & Rundas, N. (2018) · 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA) · doi:10.1109/mesa.2018.8449183 · Cited by 15 · cited 1×
“Mahmoodpour et al. [48] developed a dashboard that gives management better insight into the performance metrics of the system.”
Defense-in-depth against insider attacks in cyber-physical systems
Ning, X., & Jiang, J. (2022) · Internet of Things and Cyber-Physical Systems · doi:10.1016/j.iotcps.2022.12.001 · Cited by 14 · cited 2×
“Ning and Jiang [63] talk about the use of defense in depth to limit access by potential insider threats.”
Preuveneers, D., Joosen, W., & Ilie‐Zudor, E. (2017) · ACM Symposium on Applied Computing · doi:10.1145/3019612.3019861 · Cited by 13 · cited 1×
“The framework, built on the ForgeRock Open Identity Stack from Preuveneers et al. [103], unifies the identities of users, cloud services, and devices to ensure that each of these entities can be authenticated, be authorized, and operate with appropriate permissions.”
Shaabany, G., & Anderl, R. (2018) · International Conference on System Science and Engineering · doi:10.1109/icsse.2018.8520195 · Cited by 13 · cited 1×
“Shaabany and Anderl [114] demonstrated how the secure development process can be applied to a real-life example of a liquid mixing machine.”
Asset Management Method of Industrial IoT Systems for Cyber-Security Countermeasures
Matsumoto, N., Fujita, J., Endoh, H., Yamada, T., Sawada, K., & Kaneko, O. (2021) · Information · doi:10.3390/info12110460 · Cited by 13 · cited 1×
“Matsumoto et al. [43] propose an asset configuration management method that supports automation in diverse control system configurations and meets their specific requirements.”
Bajramović, E., Gupta, D., Guo, Y., et al. (2019) · Gesellschaft für Informatik (GI) · doi:10.18420/inf2019_ws28 · Cited by 12 · cited 4×
“IT/OT integration introduces new vulnerabilities that did not previously exist, making it essential to implement robust confidentiality measures to prevent data breaches [2].”
InfluentialManaging incident response in the industrial internet of things
Cook, A., Maglaras, L. A., Smith, R., et al. (2018) · International Journal of Internet Technology and Secured Transactions · doi:10.1504/ijitst.2018.093336 · Cited by 12
Kopytko, M. I., Liubokhynets, L., Kalinin, A., et al. (2023) · International Journal of Safety and Security Engineering · doi:10.18280/ijsse.130317 · Cited by 12 · cited 1×
“Kopytko et al. [96] present a human resource management mechanism that includes planning, control, continuous analysis, and motivation systems to increase the efficiency, safety, and security of personnel and to improve the system.”
Cloud Computing Storage Backup and Recovery Strategy Based on Secure IoT and Spark
Chang, D., Li, L., Chang, Y., et al. (2021) · Mobile Information Systems · doi:10.1155/2021/9505249 · Cited by 12
Business Continuity Management Framework of Internet of Things (IoT)
Ali, J. A., Nasir, Q., & Dweiri, F. T. (2019) · 2019 Advances in Science and Engineering Technology International Conferences (ASET) · doi:10.1109/icaset.2019.8714483 · Cited by 10 · cited 2×
“Ali et al. [88] talk about ensuring business continuity by managing various aspects of business, but they mention that there is a lack of frameworks and guidelines when it comes to creating policies and procedures for the IIoT.”
IIoT-ARAS: IIoT/ICS Automated Risk Assessment System for Prediction and Prevention
Zahran, B., Hussaini, A., & Ali-Gombe, A. (2021) · Proceedings of the Eleventh ACM Conference on Data and Application Security and Privacy · doi:10.1145/3422337.3450320 · Cited by 10 · cited 1×
“With the introduction of the IIoT, the traditionally compartmentalized OT environment is now exposed to multiple points of attack, as Zahran et al. [53] note.”
How to Survive Identity Management in the Industry 4.0 Era
Astorga, J., Barceló, M., Urbieta, A., & Jacob, E. (2021) · IEEE Access · doi:10.1109/access.2021.3092203 · Cited by 10 · cited 1×
“To ease the load on end devices, Astorga et al. [102] developed a scalable identity management system for IIoT environments known as the Certificate Lifecycle Management (CLM) server, which is based on X.509 certificates.”
Security and Independence of Process Safety and Control Systems in the Petroleum Industry
Onshus, T., Bodsberg, L., Hauge, S., Jaatun, M. G., Lundteigen, M. A., Myklebust, T., Ottermo, M. V., Petersen, S., & Wille, E. (2022) · Journal of Cybersecurity and Privacy · doi:10.3390/jcp2010003 · Cited by 10 · cited 2×
“However, complete separation in a modern IIoT environment is not possible [76].”
Model-based validation and testing of industry 4.0 plants
Glock, T., Sillman, B., Kobold, M., et al. (2018) · 2020 IEEE International Systems Conference (SysCon) · doi:10.1109/syscon.2018.8369563 · Cited by 9 · cited 1×
“Glock et al. [118] propose a model-based validation approach.”
Wireless Technologies and Applications for Industrial Internet of Things: A Review
Bahri, N., Saadaoui, S., Tabaa, M., Sadik, M., & Medromi, H. (2021) · Advances in Intelligent Systems and Computing · doi:10.1007/978-981-15-6048-4_44 · Cited by 9
A Cybersecurity Prospective on Industry 4.0: Enabler Role of Identity and Access Management
Alsaadoun, O. (2019) · International Petroleum Technology Conference · doi:10.2523/iptc-19072-ms · Cited by 9
ThreatGet: Ensuring the Implementation of Defense-in-Depth Strategy for IIoT Based on IEC 62443
Schmittner, C., Shaaban, A. M., & Macher, G. (2022) · 2022 IEEE 5th International Conference on Industrial Cyber-Physical Systems (ICPS) · doi:10.1109/icps51978.2022.9816864 · Cited by 7 · cited 3×
“Schmittner et al. [39] suggest using the modeling tool ThreatGet to automate the threat analysis process.”
InfluentialMohaghegh, M., & Ngo, V. (2024) · International Conference on Information Networking · doi:10.1109/icoin59985.2024.10572097 · Cited by 7 · cited 1×
“To deal with the low power of typical IIoT devices, Mohaghegh and Ngo [101] propose physical layer authentication that is lightweight.”
Towards an approach for assuring machinery safety in the IIoT-age
Kivelä, T., Golder, M., & Furmans, K. (2024) · Landscape Journal · doi:10.2195/lj_proc_kivelae_en_201811_01 · Cited by 6 · cited 1×
“Regarding the lifecycle of machines, Kivelä et al. [55] say that safety and security should be assessed together and cyclically throughout a machine’s lifecycle based on FMVEA (Failure Mode, Vulnerabilities, and Effects Analysis) and STRIDE.”
Depth in Defense: A Multi-layered Approach to Cybersecurity for SCADA Systems in Industry 4.0
Wai, E., & Lee, C. K. M. (2024) · Book Publisher International (a part of SCIENCEDOMAIN International) · doi:10.9734/bpi/strufp/v2/12542f · Cited by 6
Change Management Strategy for Organization in the Era of Industry 4.0
Information Systems Department, S. O. I. S., Sugandi*, L., Kurniawan, Y., Information Systems Department, S. O. I. S., Asalla, L., & Information Systems Department, S. O. I. S. (2020) · International Journal of Recent Technology and Engineering (IJRTE) · doi:10.35940/ijrte.d9108.018520 · Cited by 4 · cited 1×
“According to Sugandi et al. [59], there are a number of issues with implementing a change management system in an IIoT environment.”
Internet of Things in Asset Management: Insights from Industrial Professionals and Academia
Kinnunen, S.-K., Ylä-Kujala, A., Marttonen-Arola, S., Kärri, T., & Baglee, D. (2018) · Sunderland Repository (University of Sunderland) · Cited by 4
Lee, S., & Chung, T. (2017) · doi:10.1109/infoc.2017.8001669 · Cited by 3 · cited 1×
“Lee and Chung [86] propose an automatic method of selecting backup nodes to minimize recovery time.”
A Secure Method for Industrial IoT Development
Filho, S. B. B., & César, C. D. A. C. (2022) · SN Computer Science · doi:10.1007/s42979-022-01061-9 · Cited by 3 · cited 1×
“IgniteSec, a method specifically for the IIoT, was developed by Filho and Cesar [112].”
Hopper: Per-Device Nano Segmentation for the Industrial IoT
Vaere, P. D., Tulimiero, A., & Perrig, A. (2022) · ACM Asia Conference on Computer and Communications Security (ASIA CCS) · doi:10.1145/3488932.3501277 · Cited by 3 · cited 1×
“Nano-segmentation or per-device segmentation, called Hopper, is a solution proposed by De Vaere et al. [67].”
Synchronization for Industrial Internet of Things Using Resilient Fault-Tolerant Control Design
Priyanka, S., Shobana, N., Alfarhood, S., Pankajavalli, P. B., Sakthivel, R., & Safran, M. (2024) · IEEE Access · doi:10.1109/access.2024.3462492 · Cited by 3 · cited 1×
“Priyanka et al. [84] propose a fault-tolerant system for time synchronization based on packet-coupled oscillators (PkCOs).”
Suresh, S. A., & Priyadarsini, R. J. (2022) · International Journal of Computer Networks And Applications · doi:10.22247/ijcna/2022/211632 · Cited by 3
Towards a modeling and analysis environment for industrial IoT systemsPreprint
Ihirwe, F., Ruscio, D. D., Mazzini, S., et al. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2105.14136 · Cited by 3
Towards Sustainable IoT: Challenges, Solutions, and Future Directions for Device LongevityPreprint
Shirvani, G., & Ghasemshirazi, S. (2024) · arXiv (Cornell University) · doi:10.48550/arxiv.2405.16421 · Cited by 3
Enhancing Security and Reliability in Industrial IoT Networks through Machine Learning
Barekar, P. V. (2024) · Journal of Electrical Systems · doi:10.52783/jes.771 · Cited by 2 · cited 1×
“To ensure the security and reliability of IIoT systems, Barekar et al. [108] use machine learning techniques to monitor network traffic, detect anomalies and intrusions, and predict system failures in real time.”
Resilience in Industrial Internet of Things Systems: A Communication PerspectivePreprint
Wu, H., Miao, Y., Zhang, P., et al. (2022) · arXiv (Cornell University) · doi:10.48550/arxiv.2206.00217 · Cited by 2
Industrial IoT: Challenges and Mitigation Policies
Kumar, P., Singh, A., & Sengupta, A. (2021) · Lecture Notes on Data Engineering and Communications Technologies · doi:10.1007/978-981-16-0965-7_13 · Cited by 1 · cited 2×
“Threat mitigation can be achieved through secure development practices by using authentication, secret management procedures, encrypted network communication, ACLs, regular updates, VPNs, and user awareness, according to Kumar et al. [90].”
Security Analysis of Web Application for Industrial Internet of Things
Narayana, S. (2022) · Theseus (Ammattikorkeakoulujen) · Cited by 1
Steve, P. (2014) · NATO Science for Peace and Security Series - D: Information and Communication Security · doi:10.3233/978-1-61499-372-8-97
Research works printed but not linked: 4
- Bajramovic, E., Gupta, D., Guo, Y., Waedt, K., and Bajramovic, A. (2019, January 23–26). Security Challenges and Best Practices for IIoT. Proceedings of the INFORMATIK 2019: 50 Jahre Gesellschaft für Informatik–Informatik für Gesellschaft (Workshop-Beiträge), Kassel, Germany.
- Idris Khan, F., and Hameed, S. (2018). Understanding Security Requirements and Challenges in Internet of Things (IoTs): A Review. arXiv.
- Farina, 2021, Managing change towards Industry 4.0: How organizations design and implement Industry 4.0 projects, Int. J. Syst. Innov., 6, 18
- Fitsilis, 2018, Industry 4.0: Required personnel competences, Industry 4.0, 3, 130
Cited by
Leveraging Digital Twins and AI for Enhanced Gearbox Condition Monitoring in Wind Turbines: A Review
Habbouche, H., Amirat, Y., & Benbouzid, M. (2025) · Applied Sciences · doi:10.3390/app15105725 · Cited by 14
Nazir, I., Mushtaq, N., & Amin, W. (2025) · Energies · doi:10.3390/en18195076 · Cited by 18
Itu, A. (2025) · Applied Sciences · doi:10.3390/app151910823 · Cited by 20
Manufacturing Management Processes Integration Framework
Pereira, M. Â., Vieira, G., Varela, L., Putnik, G. D., Cruz-Cunha, M., Santos, A. S., Dieguez, T., Pereira, F. A. D. S., Leal, N., & Machado, J. (2025) · Applied Sciences · doi:10.3390/app15169165 · Cited by 8
Satpathy, P. R., & Ramachandaramurthy, V. K. (2026) · Applied Energy · doi:10.1016/j.apenergy.2026.128129 · Cited by 10
Metadata
- Authors
- Cindrić, I., Jurčević, M., & Hadjina, T.
- Affiliations
- University of Zagreb (HR)
- Faculty of Mechanical Engineering and Naval Architecture in Zagreb (HR)
- Corresponding author
- Jurčević, Marko
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2025-01-25
- Volume
- 25
- Issue
- 3
- Pages
- 728
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC11820253
- OpenAlex
- W4406920088
- Cited by
- 29
- References
- 98
- Citations by year
- 2026: 20 · 2025: 9
- FWCI
- 4.45
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Computer Science › Information Systems › Information and Cyber Security
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Control and Systems Engineering › Industrial Automation and Control Systems
- Keywords
- Industrial Internet of Things, IEC 62443, industrial cybersecurity, industrial automation and control systems, system hardening, asset inventory, risk assessment, change management, secure data storage, incident response, standards mapping
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

