The Adsorption Selectivity of Short and Long Per- and Polyfluoroalkyl Substances (PFASs) from Surface Water Using Powder-Activated Carbon
Open accessThe DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
Nine per- and polyfluoroalkyl substances (PFASs), including six perfluoroalkyl carboxylic acids (PFCAs) and three perfluoroalkyl sulfonic acids (PFSAs), were tested to find their adsorption selectivity from surface water and the feasibility of the powder activated carbon (PAC) process between the perchlorination and coagulation processes by operating parameters such as mixing intensity, dosage, contact time, initial pH, and concentration of perchlorination. The removal efficiency of four types of PAC revealed that the coal-based activated carbon was clearly advanced for all of the PFASs, and the thermal regenerated PAC did not exhibit a significant reduction in adsorption capacity. The longer carbon chain or the higher molecular weight (MW) obtained a higher adsorption capacity and the MW exhibited a more proportional relationship with the removal efficiency than the carbon chain number, regardless of the PFCA and PFSA species. Approximately 80% and 90% equilibria were accomplished within 60 and 120 min for the long chain carbon PFAS, respectively, while for the short chain PFAS, 240 min was required to reach 85% equilibrium. The effect of mixing intensity (rpm) was not considered for the removal of the PFAS, although it was relatively influenced in the short PFAS species. Due to the surface charge of the PAC and the properties of protonation of the PFASs, the acid condition increased the PFASs’ adsorption capacity. The prechlorination decreased the removal efficiency, and the reduction rate was more significantly influenced for the short chain PFAS than for the long chain PFAS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Buck, R. C., Franklin, J., Berger, U., Conder, J. M., Cousins, I. T., de Voogt, P., Jensen, A. A., Kannan, K., Mabury, S. A., & van Leeuwen, S. P. (2011) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.258 · Cited by 4,641
Global Distribution of Perfluorooctane Sulfonate in Wildlife
Giesy, J. P., & Kannan, K. (2001) · Environmental Science & Technology · doi:10.1021/es001834k · Cited by 2,750 · cited 1×
“Among PFASs, perfluorooctane sulfonic acid, C8F17SO3H (PFOS), was first identified in 2001 by Giesy and Kannan [4] and, simultaneously, the presence of perfluorooctanoic acid (PFOA, C7F15COOH) was also recognized in numerous samples of human blood [5].”
BackgroundSources, fate and transport of perfluorocarboxylates
Prevedouros, K., Cousins, I. T., Buck, R. C., & Korzeniowski, S. H. (2006) · Environmental Science & Technology · doi:10.1021/es0512475 · Cited by 2,594
Vadivelan, V., & Kumar, K. V. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.01.007 · Cited by 1,643
Gagliano, E., Sgroi, M., Falciglia, P. P., Vagliasindi, F. G. A., & Roccaro, P. (2020) · Water Research · doi:10.1016/j.watres.2019.115381 · Cited by 1,249 · cited 2×
“Among them, both electrostatic interaction a d hydrophobicity are strongly considered to be mai driving forces for the adsorption of PFOAs and PFOSs on AC [23,31,32].”
BackgroundCompound-specific, quantitative characterization of organic fluorochemicals in biological matrices
Hansen, K. J., Clemen, L. A., Ellefson, M. E., & Johnson, H. O. (2001) · Environmental Science & Technology · doi:10.1021/es001489z · Cited by 923 · cited 1×
“Among PFASs, perfluorooctane sulfonic acid, C8F17SO3H (PFOS), was first identified in 2001 by Giesy and Kannan [4] and, simultaneously, the presence of perfluorooctanoic acid (PFOA, C7F15COOH) was also recognized in numerous samples of human blood [5].”
BackgroundPolyfluoroalkyl compounds in the aquatic environment: a review of their occurrence and fate
Ahrens, L. (2011) · J. Environ. Monit. · doi:10.1039/c0em00373e · Cited by 759 · cited 1×
“Widespread application in industries such as electroplating, surface coating, and aqueous film-forming foams has resulted in their frequent occurrence in air, soil, and water, and an accumulation in the environment and in humans [8,9].”
BackgroundLi, F., Duan, J., Tian, S., Ji, H., Zhu, Y., Wei, Z., & Zhao, D. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122506 · Cited by 707
Self-citationPerfluorinated Surfactants and the Environmental Implications of Their Use in Fire-Fighting Foams
Moody, C. A., & Field, J. A. (2000) · Environmental Science & Technology · doi:10.1021/es991359u · Cited by 707
Perfluoroalkyl and polyfluoroalkyl substances in consumer products
Kotthoff, M., Müller, J., Jürling, H., Schlummer, M., & Fiedler, D. (2015) · Environmental Science and Pollution Research · doi:10.1007/s11356-015-4202-7 · Cited by 613 · cited 1×
“Widespread application in industries such as electroplating, surface coating, and aqueous film-forming foams has resulted in their frequent occurrence in air, soil, and water, and an accumulation in the environment and in humans [8,9].”
BackgroundPark, M., Wu, S., Lopez, I. J., Chang, J. Y., Karanfil, T., & Snyder, S. A. (2020) · Water Research · doi:10.1016/j.watres.2019.115364 · Cited by 549
The p K a Values of PFOA and Other Highly Fluorinated Carboxylic Acids
Goss, K.-U. (2008) · Environmental Science & Technology · doi:10.1021/es702192c · Cited by 471 · cited 1×
“For PFOA, different pKa values were reported to be −0.1, −3.8, and 2.8 by Burns et al. (2008) and Goss (2008), respectively [22,23].”
BackgroundInfluentialZaggia, A., Conte, L., Falletti, L., Fant, M., & Chiorboli, A. (2016) · Water Research · doi:10.1016/j.watres.2015.12.039 · Cited by 410 · cited 1×
“Some studies using IX concluded that IX can adsorb more than GAC [13,17,18] depending on the operating condition of the initial experiment.”
BackgroundA review of the emerging treatment technologies for PFAS contaminated soils
Mahinroosta, R., & Senevirathna, L. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109896 · Cited by 352 · cited 1×
“However, a strong bond between C–F and a high melting point of the PFAS led to a low removal restriction of the application in the lab and the field [50].”
BackgroundEschauzier, C., Beerendonk, E., Scholte-Veenendaal, P., & De Voogt, P. (2012) · Environmental Science & Technology · doi:10.1021/es201662b · Cited by 318
Ion exchange resin for PFAS removal and pilot test comparison to GAC
Woodard, S., Berry, J., & Newman, B. (2017) · Remediation Journal · doi:10.1002/rem.21515 · Cited by 250 · cited 1×
“For example, these include coagulation using alum, ferric chloride, and polyaluminum chloride (PACl) [10], oxidation using electrochemicals [11] and photocatalytics [12], and adsorption using activated carbon (AC) [13] and ion exchange (IX) [13,14].”
MethodFlores, C., Ventura, F., Martin-Alonso, J., & Caixach, J. (2013) · Science of The Total Environment · doi:10.1016/j.scitotenv.2013.05.026 · Cited by 221
Sorption of perfluorinated compounds from contaminated water to activated carbon
Hansen, M. C., Børresen, M. H., Schlabach, M., & Cornelissen, G. (2010) · Journal of Soils and Sediments · doi:10.1007/s11368-009-0172-z · Cited by 175 · cited 1×
“4% removal [15]; the application of powder activated carbon (PAC) showed a higher capacity due to its greater surface area, shorter internal diffusion, better site accessibility, and faster adsorption kinetics than GAC [16,17].”
Background
Cited by
Dey, D., Shafi, T., Chowdhury, S., Dubey, B. K., & Sen, R. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.141164 · Cited by 65
Zhang, H., Chen, Y., Liu, Y., Bowden, J. A., Townsend, T. G., & Solo-Gabriele, H. M. (2022) · Waste Management · doi:10.1016/j.wasman.2022.07.030 · Cited by 25
Olomukoro, A. A., Eitzmann, D. R., Anderson, J. L., & Gionfriddo, E. (2025) · Analytical Chemistry · doi:10.1021/acs.analchem.4c06522 · Cited by 6
Metadata
- Authors
- Son, H., Kim, T., Yoom, H.-S., Zhao, D., & An, B.
- Venue
- Water
- Publisher
- MDPI AG
- Published
- 2020-11-23
- Volume
- 12
- Issue
- 11
- Pages
- 3287
- ISSN
- 2073-4441 (ISSN-L)
- OpenAlex
- W3109580850
- Cited by
- 106
- References
- 18
- FWCI
- 3.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.