The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
4D‐Printed Biodegradable and Remotely Controllable Shape Memory Occlusion Devices
Abstract
Implantation of occlusion devices is an effective approach for the treatment of congenital heart diseases in the clinic. However, most commercial clinical occlusion devices are currently made of nondegradable metals, which may lead to complications such as perforation, allergies, and erosion. In this work, 4D‐printed novel, biodegradable, remotely controllable, and personalized shape memory occlusion devices are demonstrated and atrial septal defect occluders are exemplified. By incorporating Fe 3 O 4 magnetic particles into the shape memory poly(lactic acid) matrix, the deployment of the occluders can be controlled remotely after implantation. The excellent cytocompatibility and histocompatibility are conducive to cell adhesion and ingrowth of granulation tissues into the occluders, thus facilitating rapid endothelialization. In addition, personalized shape memory occluders ensure an ideal fit and provide sufficient support for defects. Therefore, 4D‐printed shape memory occluders can be used as a potential substitute for metal occlusion devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2 retracted
Retracted: 3D Printing of Bilineage Constructive Biomaterials for Bone and Cartilage Regeneration
Deng, C., Yao, Q., Feng, C., Li, J., Wang, L., Cheng, G., Shi, M., Chen, L., Chang, J., & Wu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703117 · Cited by 99
Self-citationRetractedRetracted: 3D Printing of Bilineage Constructive Biomaterials for Bone and Cartilage Regeneration
Deng, C., Yao, Q., Feng, C., Li, J., Wang, L., Cheng, G., Shi, M., Chen, L., Chang, J., & Wu, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900376 · Cited by 64
Self-citationRetractedApplications of magnetic nanoparticles in biomedicine
Pankhurst, Q. A., Connolly, J., Jones, S. K., & Dobson, J. (2003) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/36/13/201 · Cited by 5,881
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Self-citationPoly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Congenital Heart Disease in 56,109 Births Incidence and Natural History
MITCHELL, S. C., KORONES, S. B., & BERENDES, H. W. (1971) · Circulation · doi:10.1161/01.cir.43.3.323 · Cited by 1,331
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Electrospun poly(ɛ-caprolactone)/gelatin nanofibrous scaffolds for nerve tissue engineering
Ghasemi-Mobarakeh, L., Prabhakaran, M. P., Morshed, M., Nasr-Esfahani, M.-H., & Ramakrishna, S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.007 · Cited by 1,152
Magnetic Hydrogels and Their Potential Biomedical Applications
Li, Y., Huang, G., Zhang, X., Li, B., Chen, Y., Lu, T., Lu, T. J., & Xu, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201708 · Cited by 721
Self-citationYakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Biocompatibility and safety of PLA and its copolymers
Ramot, Y., Haim-Zada, M., Domb, A. J., & Nyska, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.012 · Cited by 576
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Yao, Q., Cosme, J. G. L., Xu, T., Miszuk, J. M., Picciani, P. H. S., Fong, H., & Sun, H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.018 · Cited by 543
Cardiac 3D Printing and its Future Directions
Vukicevic, M., Mosadegh, B., Min, J. K., & Little, S. H. (2017) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2016.12.001 · Cited by 535
Magnetic hydrogel nanocomposites for remote controlled pulsatile drug release
SATARKAR, N., & HILT, J. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.06.008 · Cited by 505
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Electrospun nanostructured scaffolds for bone tissue engineering
Prabhakaran, M. P., Venugopal, J., & Ramakrishna, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.007 · Cited by 430
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Jiang, L., Zhang, J., & Wolcott, M. P. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.001 · Cited by 396
2D‐Black‐Phosphorus‐Reinforced 3D‐Printed Scaffolds:A Stepwise Countermeasure for Osteosarcoma
Yang, B., Yin, J., Chen, Y., Pan, S., Yao, H., Gao, Y., & Shi, J. (2018) · Advanced Materials · doi:10.1002/adma.201705611 · Cited by 392
Biocompatibility of implantable synthetic polymeric drug carriers: focus on brain biocompatibility
Fournier, E., Passirani, C., Montero-Menei, C. N., & Benoit, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00161-3 · Cited by 353
Shape memory polymers and their composites in biomedical applications
Zhao, W., Liu, L., Zhang, F., Leng, J., & Liu, Y. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.12.054 · Cited by 313
Self-citationHu, Y., Li, J., Liu, P., Chen, X., Guo, D.-H., Li, Q.-S., & Rahman, K. (2012) · Journal of Biomedicine and Biotechnology · doi:10.1155/2012/728342 · Cited by 311
Self-citationCold hibernated elastic memory foams for endovascular interventions
Metcalfe, A., Desfaits, A.-C., Salazkin, I., Yahia, L., Sokolowski, W. M., & Raymond, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00362-9 · Cited by 307
Evaluating 3D‐Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M., Cinar, A., Mehdizadeh, H., Somo, S., Dean, D., Brey, E. M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403943 · Cited by 301
Biomedical applications of distally controlled magnetic nanoparticles
Corchero, J. L., & Villaverde, A. (2009) · Trends in Biotechnology · doi:10.1016/j.tibtech.2009.04.003 · Cited by 281
Evaluation of a degradable shape-memory polymer network as matrix for controlled drug release
Wischke, C., Neffe, A. T., Steuer, S., & Lendlein, A. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.05.027 · Cited by 248
Kumar, A., Mandal, S., Barui, S., Vasireddi, R., Gbureck, U., Gelinsky, M., & Basu, B. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.01.001 · Cited by 225
Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds
Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A., & Navarro, M. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.003 · Cited by 206
Ackland, D. C., Robinson, D. L., Redhead, M., Lee, P. V. S., Moskaljuk, A., & Dimitroulis, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.048 · Cited by 206
Programmed Shape‐Morphing Scaffolds Enabling Facile 3D Endothelialization
Zhao, Q., Wang, J., Cui, H., Chen, H., Wang, Y., & Du, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801027 · Cited by 195
Low density biodegradable shape memory polyurethane foams for embolic biomedical applications
Singhal, P., Small, W., Cosgriff-Hernandez, E., Maitland, D. J., & Wilson, T. S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.09.027 · Cited by 189
3D Printing of Personalized Artificial Bone Scaffolds
Jariwala, S. H., Lewis, G. S., Bushman, Z. J., Adair, J. H., & Donahue, H. J. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0001 · Cited by 164
Biphasic Ferrogels for Triggered Drug and Cell Delivery
Cezar, C. A., Kennedy, S. M., Mehta, M., Weaver, J. C., Gu, L., Vandenburgh, H., & Mooney, D. J. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400095 · Cited by 159
Plastic deformation modes in rigid polyurethane foam under static loading
Tu, Z. H., Shim, V. P. W., & Lim, C. T. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00213-x · Cited by 127
Fang, C., Kievit, F. M., Omid Veiseh, A., Stephen, Z. R., Wang, T., Lee, D., Ellenbogen, R. G., & Zhang, M. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.06.028 · Cited by 103
Wong, Y. S., Salvekar, A. V., Zhuang, K. D., Liu, H., Birch, W. R., Tay, K. H., Huang, W., & Venkatraman, S. S. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.014 · Cited by 96
3D-printed flexible polymer stents for potential applications in inoperable esophageal malignancies
Lin, M., Firoozi, N., Tsai, C.-T., Wallace, M. B., & Kang, Y. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.035 · Cited by 93
Self-fitting shape memory polymer foam inducing bone regeneration: A rabbit femoral defect study
Xie, R., Hu, J., Hoffmann, O., Zhang, Y., Ng, M. C. F., Qin, T., & Guo, X. (2018) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2018.01.013 · Cited by 86
Self‐Unfolding Flexible Microelectrode Arrays Based on Shape Memory Polymers
Wang, J., Zhao, Q., Wang, Y., Zeng, Q., Wu, T., & Du, X. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900566 · Cited by 77
Tunable shape memory polymer mold for multiple microarray replications
Wang, J., Zhao, Q., Cui, H., Wang, Y., Chen, H., & Du, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04763d · Cited by 61
Boyle, A. J., Landsman, T. L., Wierzbicki, M. A., Nash, L. D., Hwang, W., Miller, M. W., Tüzün, E., Hasan, S. M., & Maitland, D. J. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33489 · Cited by 60
3D-printed “fistula stent” designed for management of enterocutaneous fistula: An advanced strategy
Huang, J., Ren, J., Wang, G., Li, Z., Wu, X., Ren, H., & Liu, S. (2017) · World Journal of Gastroenterology · doi:10.3748/wjg.v23.i41.7489 · Cited by 53
Biomaterials and design in occlusion devices for cardiac defects: A review
Huang, Y., Kong, J. F., & Venkatraman, S. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.003 · Cited by 49
Hoehn, R., Hesse, C., İnce, H., & Peuster, M. (2009) · Catheterization and Cardiovascular Interventions · doi:10.1002/ccd.22233 · Cited by 30
Lu, W., Ouyang, W., Wang, S., Liu, Y., Zhang, F., Wang, W., & Pan, X. (2018) · Journal of Interventional Cardiology · doi:10.1111/joic.12550 · Cited by 28
Self-citationShape Memory Ankle–Foot Orthoses
Chen, J., Hu, J., Leung, K. L., Chen, C., Zhang, J. P., Zhang, Y., Zhu, Y., & Han, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08851 · Cited by 25
Huang, Y., Wong, Y. S., Wu, J., Kong, J. F., Chan, J. N., Khanolkar, L., Rao, D. P., Boey, F. Y. C., & Venkatraman, S. S. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.04.012 · Cited by 21
Liu, R., Zhang, Q., Zhou, Q., Zhang, P., & Dai, H. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.02.010 · Cited by 17
Cited by
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Self-citationAdditive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Zhang, B., Li, H., Cheng, J., Ye, H., Sakhaei, A. H., Yuan, C., Rao, P., Zhang, Y., Chen, Z., Wang, R., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101298 · Cited by 330
Metadata
- Authors
- Lin, C., Lv, J., Li, Y., Zhang, F., Li, J., Liu, Y., Liu, L., & Leng, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-10-08
- Volume
- 29
- Issue
- 51
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2979759590
- Cited by
- 272
- References
- 52
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.