The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Abstract
The ability to print defined patterns of cells and extracellular‐matrix components in three dimensions has enabled the engineering of simple biological tissues; however, bioprinting functional solid organs is beyond the capabilities of current biofabrication technologies. An alternative approach would be to bioprint the developmental precursor to an adult organ, using this engineered rudiment as a template for subsequent organogenesis in vivo. This study demonstrates that developmentally inspired hypertrophic cartilage templates can be engineered in vitro using stem cells within a supporting gamma‐irradiated alginate bioink incorporating Arg‐Gly‐Asp adhesion peptides. Furthermore, these soft tissue templates can be reinforced with a network of printed polycaprolactone fibers, resulting in a ≈350 fold increase in construct compressive modulus providing the necessary stiffness to implant such immature cartilaginous rudiments into load bearing locations. As a proof‐of‐principal, multiple‐tool biofabrication is used to engineer a mechanically reinforced cartilaginous template mimicking the geometry of a vertebral body, which in vivo supported the development of a vascularized bone organ containing trabecular‐like endochondral bone with a supporting marrow structure. Such developmental engineering approaches could be applied to the biofabrication of other solid organs by bioprinting precursors that have the capacity to mature into their adult counterparts over time in vivo.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Foreign body reaction to biomaterials
Anderson, J. M., Rodriguez, A., & Chang, D. T. (2008) · Seminars in Immunology · doi:10.1016/j.smim.2007.11.004 · Cited by 5,138
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Regulation of Rate of Cartilage Differentiation by Indian Hedgehog and PTH-Related Protein
Vortkamp, A., Lee, K., Lanske, B., Segre, G. V., Kronenberg, H. M., & Tabin, C. J. (1996) · Science · doi:10.1126/science.273.5275.613 · Cited by 1,994
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Endochondral ossification: How cartilage is converted into bone in the developing skeleton
Mackie, E. J., Ahmed, Y. A., Tatarczuch, L., Chen, K.-S., & Mirams, M. (2008) · The International Journal of Biochemistry & Cell Biology · doi:10.1016/j.biocel.2007.06.009 · Cited by 1,022
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
The in vivo degradation, absorption and excretion of PCL-based implant
Sun, H., Mei, L., Song, C., Cui, X., & Wang, P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.09.019 · Cited by 976
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Awad, H. A., Quinn Wickham, M., Leddy, H. A., Gimble, J. M., & Guilak, F. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.045 · Cited by 794
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
The mechanical properties of trabecular bone: Dependence on anatomic location and function
Goldstein, S. A. (1987) · Journal of Biomechanics · doi:10.1016/0021-9290(87)90023-6 · Cited by 687
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Atala, A., Kasper, F. K., & Mikos, A. G. (2012) · Science Translational Medicine · doi:10.1126/scitranslmed.3004890 · Cited by 544
Cell-interactive Alginate Hydrogels for Bone Tissue Engineering
Alsberg, E., Anderson, K. W., Albeiruti, A., Franceschi, R. T., & Mooney, D. J. (2001) · Journal of Dental Research · doi:10.1177/00220345010800111501 · Cited by 540
Self-citationScotti, C., Tonnarelli, B., Papadimitropoulos, A., Scherberich, A., Schaeren, S., Schauerte, A., Lopez-Rios, J., Zeller, R., Barbero, A., & Martin, I. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1000302107 · Cited by 477
Simmons, C. A., Alsberg, E., Hsiong, S., Kim, W. J., & Mooney, D. J. (2004) · Bone · doi:10.1016/j.bone.2004.02.027 · Cited by 413
Self-citationAlsberg, E., Anderson, K. W., Albeiruti, A., Rowley, J. A., & Mooney, D. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192291499 · Cited by 391
Self-citationRegulating Bone Formation via Controlled Scaffold Degradation
Alsberg, E., Kong, H. J., Hirano, Y., Smith, M. K., Albeiruti, A., & Mooney, D. J. (2003) · Journal of Dental Research · doi:10.1177/154405910308201111 · Cited by 327
Self-citationEngineering of a functional bone organ through endochondral ossification
Scotti, C., Piccinini, E., Takizawa, H., Todorov, A., Bourgine, P., Papadimitropoulos, A., Barbero, A., Manz, M. G., & Martin, I. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220108110 · Cited by 321
Engineering thick tissues - the vascularisation problem
Graduate School of Biomedical Engineering, U. O. N. S. W., Ko, H., Milthorpe, B., & McFarland, C. (2007) · European Cells and Materials · doi:10.22203/ecm.v014a01 · Cited by 238
Towards organ printing: engineering an intra-organ branched vascular tree
Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V. (2010) · Expert Opinion on Biological Therapy · doi:10.1517/14712590903563352 · Cited by 224
Park, J. Y., Shim, J.-H., Choi, S.-A., Jang, J., Kim, M., Lee, S. H., & Cho, D.-W. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00637f · Cited by 188
Visser, J., Gawlitta, D., Benders, K. E. M., Toma, S. M. H., Pouran, B., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.020 · Cited by 187
Vinardell, T., Sheehy, E. J., Buckley, C. T., & Kelly, D. J. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0544 · Cited by 168
Self-citationSheehy, E. J., Buckley, C. T., & Kelly, D. J. (2011) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2011.11.105 · Cited by 156
Self-citationBoere, K. W. M., Visser, J., Seyednejad, H., Rahimian, S., Gawlitta, D., van Steenbergen, M. J., Dhert, W. J. A., Hennink, W. E., Vermonden, T., & Malda, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.041 · Cited by 155
Elangovan, S., D’Mello, S., Hong, L., Ross, R. D., Allamargot, C., Dawson, D. V., Stanford, C. M., Johnson, G. K., Sumner, D. R., & Salem, A. K. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.10.021 · Cited by 144
Bone histomorphometry using free and commonly available software
Egan, K. P., Brennan, T. A., & Pignolo, R. J. (2012) · Histopathology · doi:10.1111/j.1365-2559.2012.04333.x · Cited by 129
Raftery, R. M., Walsh, D. P., Castaño, I. M., Heise, A., Duffy, G. P., Cryan, S., & O’Brien, F. J. (2016) · Advanced Materials · doi:10.1002/adma.201505088 · Cited by 124
Metabolic programming of mesenchymal stromal cells by oxygen tension directs chondrogenic cell fate
Leijten, J., Georgi, N., Teixeira, L. M., van Blitterswijk, C., Post, J. N., & Karperien, M. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1410977111 · Cited by 123
Jeon, O., Sok, C., Ahmed, S. M., & Alsberg, E. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0096 · Cited by 122
Self-citationChemically modified RNA activated matrices enhance bone regeneration
Elangovan, S., Khorsand, B., Do, A., Hong, L., Dewerth, A., Kormann, M., Ross, R. D., Sumner, D. R., Allamargot, C., & Salem, A. K. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.050 · Cited by 118
Structure, formation and role of cartilage canals in the developing bone
Blumer, M. J. F., Longato, S., & Fritsch, H. (2008) · Annals of Anatomy - Anatomischer Anzeiger · doi:10.1016/j.aanat.2008.02.004 · Cited by 115
Meyer, E. G., Buckley, C. T., Thorpe, S. D., & Kelly, D. J. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.05.020 · Cited by 103
Self-citationEngineering cartilage or endochondral bone: A comparison of different naturally derived hydrogels
Sheehy, E. J., Mesallati, T., Vinardell, T., & Kelly, D. J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.031 · Cited by 98
Self-citationOxidized alginate hydrogels for bone morphogenetic protein-2 delivery in long bone defects
Priddy, L. B., Chaudhuri, O., Stevens, H. Y., Krishnan, L., Uhrig, B. A., Willett, N. J., & Guldberg, R. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.015 · Cited by 98
Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Cohen, D. L., Lo, W. M., Tsavaris, A. M., Peng, D. H., Lipson, H., & Bonassar, L. J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0093 · Cited by 87
Blumer, M. J. F., Longato, S., Richter, E., et al. (2005) · Journal of Anatomy · doi:10.1111/j.1469-7580.2005.00404.x · Cited by 81
Guillaume, O., Naqvi, S. M., Lennon, K., & Buckley, C. T. (2014) · Journal of Biomaterials Applications · doi:10.1177/0885328214557905 · Cited by 60
Tissue engineering scaled-up, anatomically shaped osteochondral constructs for joint resurfacing
Mesallati, T., Sheehy, E. J., Vinardell, T., Buckley, C. T., & Kelly, D. J. (2015) · European Cells and Materials · doi:10.22203/ecm.v030a12 · Cited by 46
Self-citationTissue Engineering Whole Bones Through Endochondral Ossification: Regenerating the Distal Phalanx
Sheehy, E. J., Mesallati, T., Kelly, L., Vinardell, T., Buckley, C. T., & Kelly, D. J. (2015) · BioResearch open access · doi:10.1089/biores.2015.0014 · Cited by 43
Self-citationCunniffe, G. M., Vinardell, T., Thompson, E. M., Daly, A. C., Matsiko, A., O’Brien, F. J., & Kelly, D. J. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.021 · Cited by 38
Self-citationSheehy, E. J., Vinardell, T., Toner, M. E., Buckley, C. T., & Kelly, D. J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0090716 · Cited by 38
Self-citation
Cited by
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Applications of Alginate-Based Bioinks in 3D Bioprinting
Axpe, E., & Oyen, M. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121976 · Cited by 663
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Metadata
- Authors
- Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2016-06-09
- Volume
- 5
- Issue
- 18
- Pages
- 2353-2362
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2414171917
- Cited by
- 272
- References
- 46
- FWCI
- 13.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.