The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Inkjet Printing of Polymers: State of the Art and Future Developments
Abstract
Inkjet printing is considered to be a key technology in the field of defined polymer deposition. This article provides an introduction to inkjet printing technology and a short overview of the available instrumentation. Examples of polymer inkjet printing are given, including the manufacturing of multicolor polymer light‐emitting diode displays, polymer electronics, three‐dimensional printing, and oral dosage forms for controlled drug release. Special emphasis is placed upon the utilized polymers and conditions, such as polymer structure, molar mass, solvents, and concentration. Studies on viscoelastic fluid jets and the formation of viscoelastic droplets under gravity indicate that strain hardening is the key parameter that determines the inkjet printability of polymer solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Pattern formation in drying drops
Deegan, R. D. (2000) · Physical Review E · doi:10.1103/physreve.61.475 · Cited by 1,297
Progress and Trends in Ink-jet Printing Technology
Le, H. P. (1998) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.1998.42.1.art00007 · Cited by 720
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573
Self-Aligned, Vertical-Channel, Polymer Field-Effect Transistors
Stingelin, N., Friend, R. H., & Sirringhaus, H. (2003) · Science · doi:10.1126/science.1081279 · Cited by 563
Microarray fabrication with covalent attachment of DNA using Bubble Jet technology
Okamoto, T., Suzuki, T., & Yamamoto, N. (2000) · Nature Biotechnology · doi:10.1038/74507 · Cited by 440
Solid free-form fabrication of drug delivery devices
Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., & Cima, M. J. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00173-5 · Cited by 361
Cited by
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Color Control in π-Conjugated Organic Polymers for Use in Electrochromic Devices
Beaujuge, P. M., & Reynolds, J. R. (2010) · Chemical Reviews · doi:10.1021/cr900129a · Cited by 1,881
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Materials and Applications for Large Area Electronics: Solution-Based Approaches
Arias, A. C., MacKenzie, J. D., McCulloch, I., Rivnay, J., & Salleo, A. (2010) · Chemical Reviews · doi:10.1021/cr900150b · Cited by 1,733
Marangoni Effect Reverses Coffee-Ring Depositions
Hu, H., & Larson, R. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0609232 · Cited by 1,645
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Yunker, P. J., Still, T., Lohr, M. A., & Yodh, A. G. (2011) · Nature · doi:10.1038/nature10344 · Cited by 1,618
Transparent conductors as solar energy materials: A panoramic review
Granqvist, C. G. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.04.031 · Cited by 1,566
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
One-dimensional ZnO nanostructures: Solution growth and functional properties
Xu, S., & Wang, Z. L. (2011) · Nano Research · doi:10.1007/s12274-011-0160-7 · Cited by 1,361
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic
Cho, J. H., Lee, J., Xia, Y., Kim, B., He, Y., Renn, M. J., Lodge, T. P., & Daniel Frisbie, C. (2008) · Nature Materials · doi:10.1038/nmat2291 · Cited by 1,178
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Gate Dielectrics for Organic Field‐Effect Transistors: New Opportunities for Organic Electronics
Facchetti, A., Yoon, M. ‐., & Marks, T. J. (2005) · Advanced Materials · doi:10.1002/adma.200500517 · Cited by 1,032
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Flexible Electronics: The Next Ubiquitous Platform
Nathan, A., Ahnood, A., Cole, M. T., Lee, S., Suzuki, Y., Hiralal, P., Bonaccorso, F., Hasan, T., Garcia-Gancedo, L., Dyadyusha, A., et al. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190168 · Cited by 1,000
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Polymers for flexible displays: From material selection to device applications
Choi, M.-C., Kim, Y., & Ha, C.-S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.11.004 · Cited by 981
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
Self-citationSurface acoustic wave microfluidics
Ding, X., Li, P., Lin, S.-C. S., Stratton, Z. S., Nama, N., Guo, F., Slotcavage, D., Mao, X., Shi, J., Costanzo, F., et al. (2013) · Lab on a Chip · doi:10.1039/c3lc50361e · Cited by 926
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Quantum‐Dot Light‐Emitting Diodes for Large‐Area Displays: Towards the Dawn of Commercialization
Dai, X., Deng, Y., Peng, X., & Jin, Y. (2017) · Advanced Materials · doi:10.1002/adma.201607022 · Cited by 859
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Self-citationInkjet-Printed Microfluidic Multianalyte Chemical Sensing Paper
Abe, K., Suzuki, K., & Citterio, D. (2008) · Analytical Chemistry · doi:10.1021/ac800604v · Cited by 766
Recent Developments in the Application of Phosphorescent Iridium(III) Complex Systems
Ulbricht, C., Beyer, B., Friebe, C., Winter, A., & Schubert, U. S. (2009) · Advanced Materials · doi:10.1002/adma.200803537 · Cited by 746
Self-citationInfluence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Nanoparticulate Functional Materials
Goesmann, H., & Feldmann, C. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903053 · Cited by 733
Fundamental Fluid Dynamics Challenges in Inkjet Printing
Lohse, D. (2022) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-022321-114001 · Cited by 727
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
MOF positioning technology and device fabrication
Falcaro, P., Ricco, R., Doherty, C. M., Liang, K., Hill, A. J., & Styles, M. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00089g · Cited by 710
Foldable Printed Circuit Boards on Paper Substrates
Siegel, A. C., Phillips, S. T., Dickey, M. D., Lu, N., Suo, Z., & Whitesides, G. M. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901363 · Cited by 705
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Abdollahi, A., Roghani-Mamaqani, H., Razavi, B., & Salami-Kalajahi, M. (2020) · ACS Nano · doi:10.1021/acsnano.0c07289 · Cited by 643
Patterning: Principles and Some New Developments
Geissler, M., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400835 · Cited by 641
The dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
LaFratta, C. N., Fourkas, J. T., Baldacchini, T., & Farrer, R. A. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603995 · Cited by 589
Fully Plastic Actuator through Layer‐by‐Layer Casting with Ionic‐Liquid‐Based Bucky Gel
Fukushima, T., Asaka, K., Kosaka, A., & Aida, T. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462318 · Cited by 576
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Direct writing of copper conductive patterns by ink-jet printing
Park, B. K., Kim, D., Jeong, S., Moon, J., & Kim, J. S. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.142 · Cited by 555
Jeong, S., Woo, K., Kim, D., Lim, S., Kim, J. S., Shin, H., Xia, Y., & Moon, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700902 · Cited by 529
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Paper‐Based Inkjet‐Printed Microfluidic Analytical Devices
Yamada, K., Henares, T. G., Suzuki, K., & Citterio, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411508 · Cited by 501
Inkjet Printing of Well-Defined Polymer Dots and Arrays
de Gans, B.-J., & Schubert, U. S. (2004) · Langmuir · doi:10.1021/la049469o · Cited by 499
Self-citationDirect writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Huang, L., Huang, Y., Liang, J., Wan, X., & Chen, Y. (2011) · Nano Research · doi:10.1007/s12274-011-0123-z · Cited by 458
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
A manufacturing perspective on graphene dispersions
Johnson, D. W., Dobson, B. P., & Coleman, K. S. (2015) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2015.11.004 · Cited by 440
Materials and Devices toward Fully Solution Processable Organic Light-Emitting Diodes
Zhong, C., Duan, C., Huang, F., Wu, H., & Cao, Y. (2011) · Chemistry of Materials · doi:10.1021/cm101937p · Cited by 436
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Sekitani, T., Noguchi, Y., Zschieschang, U., Klauk, H., & Someya, T. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0708340105 · Cited by 424
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
An experimental study of drop-on-demand drop formation
Dong, H., Carr, W. W., & Morris, J. F. (2006) · Physics of Fluids · doi:10.1063/1.2217929 · Cited by 395
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Electric-double-layer field-effect transistors with ionic liquids
Fujimoto, T., & Awaga, K. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50755f · Cited by 392
Printable All‐Organic Electrochromic Active‐Matrix Displays
Andersson, P., Forchheimer, R., Tehrani, P., & Berggren, M. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601241 · Cited by 382
Wen, Y., & Xu, J. (2017) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.28482 · Cited by 378
Patterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
Direct Desktop Printed-Circuits-on-Paper Flexible Electronics
Zheng, Y., He, Z., Gao, Y., & Liu, J. (2013) · Scientific Reports · doi:10.1038/srep01786 · Cited by 370
Functionalized Organic Thin Film Transistors for Biosensing
Wang, N., Yang, A., Fu, Y., Li, Y., & Yan, F. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00448 · Cited by 361
Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1250605 · Cited by 354
The role of smart packaging system in food supply chain
Chen, S., Brahma, S., Mackay, J., Cao, C., & Aliakbarian, B. (2020) · Journal of Food Science · doi:10.1111/1750-3841.15046 · Cited by 348
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
3D printing electronic components and circuits with conductive thermoplastic filament
Flowers, P. F., Reyes, C., Ye, S., Kim, M. J., & Wiley, B. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.002 · Cited by 333
2D Black Phosphorus Saturable Absorbers for Ultrafast Photonics
Zhang, M., Wu, Q., Zhang, F., Chen, L., Jin, X., Hu, Y., Zheng, Z., & Zhang, H. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800224 · Cited by 333
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Electrochemical nanoarchitectonics and layer-by-layer assembly: From basics to future
Rydzek, G., Ji, Q., Li, M., Schaaf, P., Hill, J. P., Boulmedais, F., & Ariga, K. (2015) · Nano Today · doi:10.1016/j.nantod.2015.02.008 · Cited by 326
Inkjet printing for flexible electronics: Materials, processes and equipments
Yin, Z., Huang, Y., Bu, N., Wang, X., & Xiong, Y. (2010) · Chinese Science Bulletin · doi:10.1007/s11434-010-3251-y · Cited by 321
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Recent Progress in Inkjet‐Printed Thin‐Film Transistors
Chung, S., Cho, K., & Lee, T. (2019) · Advanced Science · doi:10.1002/advs.201801445 · Cited by 312
Inkjet-printed silver tracks: low temperature curing and thermal stability investigation
Perelaer, B. J., de Laat, A. W. M., Hendriks, C. E., & Schubert, U. S. (2008) · Journal of Materials Chemistry · doi:10.1039/b720032c · Cited by 308
Self-citationLithography‐Free, Self‐Aligned Inkjet Printing with Sub‐Hundred‐Nanometer Resolution
Sele, C. W., von Werne, T., Friend, R. H., & Sirringhaus, H. (2005) · Advanced Materials · doi:10.1002/adma.200401285 · Cited by 304
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Jang, J., Ha, J., & Cho, J. (2007) · Advanced Materials · doi:10.1002/adma.200602127 · Cited by 296
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Polymer based organic solar cells using ink-jet printed active layers
Aernouts, T., Aleksandrov, T., Girotto, C., Genoe, J., & Poortmans, J. (2008) · Applied Physics Letters · doi:10.1063/1.2833185 · Cited by 292
Kyobula, M., Adedeji, A., Alexander, M. R., Saleh, E., Wildman, R., Ashcroft, I., Gellert, P. R., & Roberts, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.025 · Cited by 288
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Self-citationRapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials
Hahn, V., Kiefer, P., Frenzel, T., Qu, J., Blasco, E., Barner‐Kowollik, C., & Wegener, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907795 · Cited by 285
High-Performance Flexible Hybrid Field-Effect Transistors Based on Cellulose Fiber Paper
Fortunato, E., Correia, N., Barquinha, P., Pereira, L., Goncalves, G., & Martins, R. (2008) · IEEE Electron Device Letters · doi:10.1109/led.2008.2001549 · Cited by 283
Toward 3D Printing of Pure Metals by Laser‐Induced Forward Transfer
Visser, C. W., Pohl, R., Sun, C., Römer, G., Huis in ‘t Veld, B., & Lohse, D. (2015) · Advanced Materials · doi:10.1002/adma.201501058 · Cited by 282
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
Self-citationXiong, R., Grant, A. M., Ma, R., Zhang, S., & Tsukruk, V. V. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.01.002 · Cited by 276
Teichler, A., Perelaer, J., & Schubert, U. S. (2013) · Journal of Materials Chemistry C · doi:10.1039/c2tc00255h · Cited by 271
Self-citationNanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Li, H., & Liang, J. (2020) · Advanced Materials · doi:10.1002/adma.201805864 · Cited by 263
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Self-citationIntegrating Electronics and Microfluidics on Paper
Hamedi, M. M., Ainla, A., Güder, F., Christodouleas, D. C., Fernández‐Abedul, M. T., & Whitesides, G. M. (2016) · Advanced Materials · doi:10.1002/adma.201505823 · Cited by 257
Personalised dosing: Printing a dose of one’s own medicine
Alomari, M., Mohamed, F. H., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.006 · Cited by 257
A review on flexible gas sensors: From materials to devices
Alrammouz, R., Podlecki, J., Abboud, P., Sorli, B., & Habchi, R. (2018) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2018.10.036 · Cited by 255
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
The arrival of commercial bioprinters – Towards 3D bioprinting revolution!
Choudhury, D., Anand, S., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.139 · Cited by 189
Metadata
- Authors
- de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2004-02-03
- Volume
- 16
- Issue
- 3
- Pages
- 203-213
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2108064844
- Cited by
- 1,906
- References
- 16
- FWCI
- 49.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.