The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Inkjet Printing—Process and Its Applications
Abstract
In this Progress Report we provide an update on recent developments in inkjet printing technology and its applications, which include organic thin‐film transistors, light‐emitting diodes, solar cells, conductive structures, memory devices, sensors, and biological/pharmaceutical tasks. Various classes of materials and device types are in turn examined and an opinion is offered about the nature of the progress that has been achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Semiconductor Devices: Physics and Technology
Sze, S. M. (1985) · Cited by 4,096
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Dewetting of conducting polymer inkjet droplets on patterned surfaces
Wang, J. Z., Zheng, Z. H., Li, H. W., Huck, W. T. S., & Sirringhaus, H. (2004) · Nature Materials · doi:10.1038/nmat1073 · Cited by 583
Downscaling of self-aligned, all-printed polymer thin-film transistors
Noh, Y.-Y., Zhao, N., Caironi, M., & Sirringhaus, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.365 · Cited by 549
Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics
Huang, D., Liao, F., Molesa, S., Redinger, D., & Subramanian, V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1582466 · Cited by 524
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Electronics based on two-dimensional materials
Fiori, G., Bonaccorso, F., Iannaccone, G., Palacios, T., Neumaier, D., Seabaugh, A., Banerjee, S. K., & Colombo, L. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.207 · Cited by 3,176
π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
Facchetti, A. (2011) · Chemistry of Materials · doi:10.1021/cm102419z · Cited by 2,348
Skin electronics from scalable fabrication of an intrinsically stretchable transistor array
Wang, S., Xu, J., Wang, W., Wang, G.-J. N., Rastak, R., Molina-Lopez, F., Chung, J. W., Niu, S., Feig, V. R., Lopez, J., et al. (2018) · Nature · doi:10.1038/nature25494 · Cited by 2,198
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
A New Frontier of Printed Electronics: Flexible Hybrid Electronics
Khan, Y., Thielens, A., Muin, S., Ting, J., Baumbauer, C., & Arias, A. C. (2020) · Advanced Materials · doi:10.1002/adma.201905279 · Cited by 891
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Quantum‐Dot Light‐Emitting Diodes for Large‐Area Displays: Towards the Dawn of Commercialization
Dai, X., Deng, Y., Peng, X., & Jin, Y. (2017) · Advanced Materials · doi:10.1002/adma.201607022 · Cited by 859
Polymer–fullerene bulk heterojunction solar cells
Deibel, C., & Dyakonov, V. (2010) · Reports on Progress in Physics · doi:10.1088/0034-4885/73/9/096401 · Cited by 825
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Yang, G., Xie, L., Mäntysalo, M., Zhou, X., Pang, Z., Xu, L. D., Kao-Walter, S., Chen, Q., & Zheng, L.-R. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2307795 · Cited by 696
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Morphology control strategies for solution-processed organic semiconductor thin films
Diao, Y., Shaw, L., Bao, Z., & Mannsfeld, S. C. B. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00688g · Cited by 670
Abdollahi, A., Roghani-Mamaqani, H., Razavi, B., & Salami-Kalajahi, M. (2020) · ACS Nano · doi:10.1021/acsnano.0c07289 · Cited by 643
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Liang, J., Tong, K., & Pei, Q. (2016) · Advanced Materials · doi:10.1002/adma.201600772 · Cited by 535
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Kumar, P., Singh, S., & Gupta, B. K. (2016) · Nanoscale · doi:10.1039/c5nr06965c · Cited by 529
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Energy Harvesters for Wearable and Stretchable Electronics: From Flexibility to Stretchability
Wu, H., Huang, Y., Xu, F., Duan, Y., & Yin, Z. (2016) · Advanced Materials · doi:10.1002/adma.201602251 · Cited by 520
Photodeformable Azobenzene‐Containing Liquid Crystal Polymers and Soft Actuators
Pang, X., Lv, J., Zhu, C., Qin, L., & Yu, Y. (2019) · Advanced Materials · doi:10.1002/adma.201904224 · Cited by 514
Zhang, C., Wang, B., Li, W., Huang, S., Kong, L., Li, Z., & Li, L. (2017) · Nature Communications · doi:10.1038/s41467-017-01248-2 · Cited by 511
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Inkjet printing of conductive materials: a review
Cummins, G., & Desmulliez, M. P. Y. (2012) · Circuit World · doi:10.1108/03056121211280413 · Cited by 504
Paper‐Based Inkjet‐Printed Microfluidic Analytical Devices
Yamada, K., Henares, T. G., Suzuki, K., & Citterio, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411508 · Cited by 501
Production and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Infrared Colloidal Quantum Dots for Photovoltaics: Fundamentals and Recent Progress
Tang, J., & Sargent, E. H. (2011) · Advanced Materials · doi:10.1002/adma.201001491 · Cited by 488
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Evaporation of a Droplet: From physics to applications
Zang, D., Tarafdar, S., Tarasevich, Y. Y., Dutta Choudhury, M., & Dutta, T. (2019) · Physics Reports · doi:10.1016/j.physrep.2019.01.008 · Cited by 475
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
All-inkjet-printed, solid-state flexible supercapacitors on paper
Choi, K.-H., Yoo, J., Lee, C. K., & Lee, S.-Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00966b · Cited by 449
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
High-speed and large-scale intrinsically stretchable integrated circuits
Zhong, D., Wu, C., Jiang, Y., Yuan, Y., Kim, M.-G., Nishio, Y., Shih, C.-C., Wang, W., Lai, J.-C., Ji, X., et al. (2024) · Nature · doi:10.1038/s41586-024-07096-7 · Cited by 429
Printed Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
Solution processing of transparent conductors: from flask to film
Pasquarelli, R. M., Ginley, D. S., & O'Hayre, R. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15065k · Cited by 403
Monolithic optical microlithography of high-density elastic circuits
Zheng, Y.-Q., Liu, Y., Zhong, D., Nikzad, S., Liu, S., Yu, Z., Liu, D., Wu, H.-C., Zhu, C., Li, J., et al. (2021) · Science · doi:10.1126/science.abh3551 · Cited by 401
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Bolotsky, A., Butler, D., Dong, C., Gerace, K., Glavin, N. R., Muratore, C., Robinson, J. A., & Ebrahimi, A. (2019) · ACS Nano · doi:10.1021/acsnano.9b03632 · Cited by 381
Wen, Y., & Xu, J. (2017) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.28482 · Cited by 378
Dai, J., Ogbeide, O., Macadam, N., Sun, Q., Yu, W., Li, Y., Su, B.-L., Hasan, T., Huang, X., & Huang, W. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00459a · Cited by 378
Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection
Seekaew, Y., Lokavee, S., Phokharatkul, D., Wisitsoraat, A., Kerdcharoen, T., & Wongchoosuk, C. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.08.044 · Cited by 373
Clogging of microfluidic systems
Dressaire, E., & Sauret, A. (2017) · Soft Matter · doi:10.1039/c6sm01879c · Cited by 370
Star-shaped π-conjugated oligomers and their applications in organic electronics and photonics
Kanibolotsky, A. L., Perepichka, I. F., & Skabara, P. J. (2010) · Chemical Society Reviews · doi:10.1039/b918154g · Cited by 366
Recent Progress in Micro‐LED‐Based Display Technologies
Anwar, A. R., Sajjad, M. T., Johar, M. A., Hernández‐Gutiérrez, C. A., Usman, M., & Łepkowski, S. P. (2022) · Laser & Photonics Reviews · doi:10.1002/lpor.202100427 · Cited by 352
The role of smart packaging system in food supply chain
Chen, S., Brahma, S., Mackay, J., Cao, C., & Aliakbarian, B. (2020) · Journal of Food Science · doi:10.1111/1750-3841.15046 · Cited by 348
Zhang, L., Wu, J., Hedhili, M. N., Yang, X., & Wang, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05862c · Cited by 347
Self-powered integrated microfluidic point-of-care low-cost enabling (SIMPLE) chip
Yeh, E.-C., Fu, C.-C., Hu, L., Thakur, R., Feng, J., & Lee, L. P. (2017) · Science Advances · doi:10.1126/sciadv.1501645 · Cited by 347
2D Black Phosphorus Saturable Absorbers for Ultrafast Photonics
Zhang, M., Wu, Q., Zhang, F., Chen, L., Jin, X., Hu, Y., Zheng, Z., & Zhang, H. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800224 · Cited by 333
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Resonant-enhanced full-color emission of quantum-dot-based micro LED display technology
Han, H.-V., Lin, H.-Y., Lin, C.-C., Chong, W.-C., Li, J.-R., Chen, K.-J., Yu, P., Chen, T.-M., Chen, H.-M., Lau, K.-M., et al. (2015) · Optics Express · doi:10.1364/oe.23.032504 · Cited by 330
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Yao, S., Ren, P., Song, R., Liu, Y., Huang, Q., Dong, J., O'Connor, B. T., & Zhu, Y. (2020) · Advanced Materials · doi:10.1002/adma.201902343 · Cited by 324
Noninvasive in vivo 3D bioprinting
Chen, Y., Zhang, J., Liu, X., Wang, S., Tao, J., Huang, Y., Wu, W., Li, Y., Zhou, K., Wei, X., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba7406 · Cited by 316
Organic–Inorganic Hybrid Halide Perovskites for Memories, Transistors, and Artificial Synapses
Choi, J., Han, J. S., Hong, K., Kim, S. Y., & Jang, H. W. (2018) · Advanced Materials · doi:10.1002/adma.201704002 · Cited by 314
Recent Progress in Inkjet‐Printed Thin‐Film Transistors
Chung, S., Cho, K., & Lee, T. (2019) · Advanced Science · doi:10.1002/advs.201801445 · Cited by 312
Recent developments of advanced micro-supercapacitors: design, fabrication and applications
Bu, F., Zhou, W., Xu, Y., Du, Y., Guan, C., & Huang, W. (2020) · npj Flexible Electronics · doi:10.1038/s41528-020-00093-6 · Cited by 311
Large-Area Soft e-Skin: The Challenges Beyond Sensor Designs
Dahiya, R., Yogeswaran, N., Liu, F., Manjakkal, L., Burdet, E., Hayward, V., & Jörntell, H. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2941366 · Cited by 309
Tin and germanium monochalcogenide IV–VI semiconductor nanocrystals for use in solar cells
Antunez, P. D., Buckley, J. J., & Brutchey, R. L. (2011) · Nanoscale · doi:10.1039/c1nr10084j · Cited by 310
Fast Fabrication of Flexible Functional Circuits Based on Liquid Metal Dual‐Trans Printing
Wang, Q., Yu, Y., Yang, J., & Liu, J. (2015) · Advanced Materials · doi:10.1002/adma.201502200 · Cited by 310
Printed subthreshold organic transistors operating at high gain and ultralow power
Jiang, C., Choi, H. W., Cheng, X., Ma, H., Hasko, D., & Nathan, A. (2019) · Science · doi:10.1126/science.aav7057 · Cited by 308
Chemical formation of soft metal electrodes for flexible and wearable electronics
Wang, D., Zhang, Y., Lu, X., Ma, Z., Xie, C., & Zheng, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00192d · Cited by 307
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
Tran, T. S., Dutta, N. K., & Choudhury, N. R. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.09.003 · Cited by 298
Inkjet-printed stretchable and low voltage synaptic transistor array
Molina-Lopez, F., Gao, T. Z., Kraft, U., Zhu, C., Öhlund, T., Pfattner, R., Feig, V. R., Kim, Y., Wang, S., Yun, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10569-3 · Cited by 296
Shen, W., Zhang, X., Huang, Q., Xu, Q., & Song, W. (2014) · Nanoscale · doi:10.1039/c3nr05479a · Cited by 288
Wei, C., Su, W., Li, J., Xu, B., Shan, Q., Wu, Y., Zhang, F., Luo, M., Xiang, H., Cui, Z., et al. (2022) · Advanced Materials · doi:10.1002/adma.202107798 · Cited by 284
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
High efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen, T. M., Galagan, Y., Biezemans, A. F. K. V., Slaats, T. M. W. L., Voorthuijzen, W. P., Kommeren, S., Shanmugam, S., Teunissen, J. P., Hadipour, A., Verhees, W. J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00540j · Cited by 275
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Ma, G., Wang, L., & Ju, Y. (2018) · Science China Technological Sciences · doi:10.1007/s11431-016-9077-7 · Cited by 261
Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance
Guo, Y., Patanwala, H. S., Bognet, B., & Ma, A. W. K. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0076 · Cited by 258
A Natural Silk Fibroin Protein‐Based Transparent Bio‐Memristor
Hota, M. K., Bera, M. K., Kundu, B., Kundu, S. C., & Maiti, C. K. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200073 · Cited by 258
Integrating Electronics and Microfluidics on Paper
Hamedi, M. M., Ainla, A., Güder, F., Christodouleas, D. C., Fernández‐Abedul, M. T., & Whitesides, G. M. (2016) · Advanced Materials · doi:10.1002/adma.201505823 · Cited by 257
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Zhang, J., Wehrle, E., Rubert, M., & Müller, R. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083971 · Cited by 257
Colloidal quantum dots for optoelectronics
Litvin, A. P., Martynenko, I. V., Purcell-Milton, F., Baranov, A. V., Fedorov, A. V., & Gun'ko, Y. K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02076g · Cited by 255
Ma, G., & Wang, L. (2018) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-017-0430-x · Cited by 253
Metadata
- Authors
- Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2010-02-04
- Volume
- 22
- Issue
- 6
- Pages
- 673-685
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2125795420
- Cited by
- 2,375
- References
- 35
- FWCI
- 51.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.