The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
3D‐Printing of Lightweight Cellular Composites
Open accessAbstract
A new epoxy-based ink is reported, which enables 3D printing of lightweight cellular composites with controlled alignment of multiscale, high-aspectratio fiber reinforcement to create hierarchical structures inspired by balsa wood. Young's modulus values up to 10 times higher than existing commercially available 3D-printed polymers are attainable, while comparable strength values are maintained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Self-citationThe hierarchical structure and mechanics of plant materials
Gibson, L. J. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2012.0341 · Cited by 1,215
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Self-citation
Cited by
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citation3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Self-citationDirect Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Current characterization methods for cellulose nanomaterials
Foster, E. J., Moon, R. J., Agarwal, U. P., Bortner, M. J., Bras, J., Camarero-Espinosa, S., Chan, K. J., Clift, M. J. D., Cranston, E. D., Eichhorn, S. J., et al. (2018) · Chemical Society Reviews · doi:10.1039/c6cs00895j · Cited by 1,021
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 873
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Structural Design Elements in Biological Materials: Application to Bioinspiration
Naleway, S. E., Porter, M. M., McKittrick, J., & Meyers, M. A. (2015) · Advanced Materials · doi:10.1002/adma.201502403 · Cited by 730
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
Self-citationAdditive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Recent advances in three-dimensional graphene based materials for catalysis applications
Qiu, B., Xing, M., & Zhang, J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00904f · Cited by 502
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
De novo composite design based on machine learning algorithm
Gu, G. X., Chen, C.-T., & Buehler, M. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.10.001 · Cited by 470
Prediction of composite microstructure stress-strain curves using convolutional neural networks
Yang, C., Kim, Y., Ryu, S., & Gu, G. X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108509 · Cited by 446
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
A review on functionally graded structures and materials for energy absorption
Xu, F., Zhang, X., & Zhang, H. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.094 · Cited by 421
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Self-citationLi, Y., Gao, T., Yang, Z., Chen, C., Kuang, Y., Song, J., Jia, C., Hitz, E. M., Yang, B., & Hu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.034 · Cited by 416
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
Wearable piezoresistive pressure sensors based on 3D graphene
Cao, M., Su, J., Fan, S., Qiu, H., Su, D., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126777 · Cited by 373
Additive Manufacturing of Piezoelectric Materials
Chen, C., Wang, X., Wang, Y., Yang, D., Yao, F., Zhang, W., Wang, B., Sewvandi, G. A., Yang, D., & Hu, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005141 · Cited by 371
Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
Arefin, A. M. E., Khatri, N. R., Kulkarni, N., & Egan, P. F. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 361
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Ghaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 358
Siddique, S. H., Hazell, P. J., Wang, H., Escobedo, J. P., & Ameri, A. A. H. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.103051 · Cited by 339
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Hao, W., Liu, Y., Zhou, H., Chen, H., & Fang, D. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2017.11.004 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Machine learning for composite materials
Chen, C.-T., & Gu, G. X. (2019) · MRS Communications · doi:10.1557/mrc.2019.32 · Cited by 311
Yu, Z.-L., Yang, N., Zhou, L.-C., Ma, Z.-Y., Zhu, Y.-B., Lu, Y.-Y., Qin, B., Xing, W.-Y., Ma, T., Li, S.-C., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat7223 · Cited by 310
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang, Y., Li, X., Chu, M., Sun, H., Jin, J., Yu, K., Wang, Q., Zhou, Q., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aau9490 · Cited by 310
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Self-citationRotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Self-citationRecent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering
Zhang, Y., Liu, X., Zeng, L., Zhang, J., Zuo, J., Zou, J., Ding, J., & Chen, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903279 · Cited by 294
Tensile strength of commercial polymer materials for fused filament fabrication 3D printing
Tanikella, N. G., Wittbrodt, B., & Pearce, J. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.03.005 · Cited by 287
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Light to Shape the Future: From Photolithography to 4D Printing
del Barrio, J., & Sánchez‐Somolinos, C. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900598 · Cited by 258
3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
Lv, J., Gong, Z., He, Z., Yang, J., Chen, Y., Tang, C., Liu, Y., Fan, M., & Lau, W.-M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02202f · Cited by 257
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
A review on 3D printed matrix polymer composites: its potential and future challenges
Saroia, J., Wang, Y., Wei, Q., Lei, M., Li, X., Guo, Y., & Zhang, K. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04534-z · Cited by 253
Ahrens, J. H., Uzel, S. G. M., Skylar‐Scott, M., Mata, M. M., Lu, A., Kroll, K. T., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202200217 · Cited by 143
Self-citationNerger, B. A., Brun, P.-T., & Nelson, C. M. (2019) · Soft Matter · doi:10.1039/c8sm02605j · Cited by 111
Ma, S., Jiang, Y., Fu, S., He, P., Sun, C., Duan, X., Jia, D., Colombo, P., & Zhou, Y. (2023) · Journal of Advanced Ceramics · doi:10.26599/jac.2023.9220700 · Cited by 88
Applications of cellulose nanofibrils in drug delivery
Gopi, S., Balakrishnan, P., Geethamma, V. G., Pius, A., & Thomas, S. (2018) · Applications of Nanocomposite Materials in Drug Delivery · doi:10.1016/b978-0-12-813741-3.00004-2 · Cited by 13
Metadata
- Authors
- Compton, B. G., & Lewis, J. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2014-06-18
- Volume
- 26
- Issue
- 34
- Pages
- 5930-5935
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2109494119
- Cited by
- 1,626
- References
- 21
- FWCI
- 96.82
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.