The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Abstract
Commercial deployment of lithium anodes has been severely impeded by the poor battery safety, unsatisfying cycling lifespan, and efficiency. Recently, building artificial interfacial layers over a lithium anode was regarded as an effective strategy to stabilize the electrode. However, the fabrications reported so far have mostly been conducted directly upon lithium foil, often requiring stringent reaction conditions with indispensable inert environment protection and highly specialized reagents due to the high reactivity of metallic lithium. Besides, the uneven lithium‐ion flux across the lithium surface should be more powerfully tailored via mighty interfacial layer materials. Herein, g‐C 3 N 4 is employed as a Li+‐modulating material and a brand‐new autotransferable strategy to fabricate this interfacial layer for Li anodes without any inert atmosphere protection and limitation of chemical regents is developed. The g‐C 3 N 4 film is filtrated on the separator in air using a common alcohol solution and then perfectly autotransferred to the lithium surface by electrolyte wetting during normal cell assembly. The abundant nitrogen species within g‐C 3 N 4 nanosheets can form transient LiN bonds to powerfully stabilize the lithium‐ion flux and thus enable a CE over 99% for 900 cycles and smooth deposition at high current densities and capacities, surpassing most previous works.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Self-citationNegating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Self-citationA facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Kang, Y., Yang, Y., Yin, L., Kang, X., Liu, G., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201501939 · Cited by 924
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Niu, P., Yin, L., Yang, Y., Liu, G., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201404057 · Cited by 764
Self-citationA Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Self-citationUltrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
The Lithium/Air Battery: Still an Emerging System or a Practical Reality?
Grande, L., Paillard, E., Hassoun, J., Park, J., Lee, Y., Sun, Y., Passerini, S., & Scrosati, B. (2015) · Advanced Materials · doi:10.1002/adma.201403064 · Cited by 618
Zhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Self-citationPolymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Self-citationLiu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
Self-citationWang, X., Zeng, W., Hong, L., Xu, W., Yang, H., Wang, F., Duan, H., Tang, M., & Jiang, H. (2018) · Nature Energy · doi:10.1038/s41560-018-0104-5 · Cited by 499
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Self-citationA consideration of the morphology of electrochemically deposited lithium in an organic electrolyte
Yamaki, J.-I., Tobishima, S.-I., Hayashi, K., Saito, K., Nemoto, Y., & Arakawa, M. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00067-6 · Cited by 483
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Self-citationEffects of Polymer Coatings on Electrodeposited Lithium Metal
Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06047 · Cited by 452
Self-citationYe, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Self-citationDefect-induced plating of lithium metal within porous graphene networks
Mukherjee, R., Thomas, A. V., Datta, D., Singh, E., Li, J., Eksik, O., Shenoy, V. B., & Koratkar, N. (2014) · Nature Communications · doi:10.1038/ncomms4710 · Cited by 436
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
Luo, J., Fang, C., & Wu, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701482 · Cited by 390
MXene Aerogel Scaffolds for High‐Rate Lithium Metal Anodes
Zhang, X., Lv, R., Wang, A., Guo, W., Liu, X., & Luo, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808714 · Cited by 354
Zhang, C., Lv, W., Zhou, G., Huang, Z., Zhang, Y., Lyu, R., Wu, H., Yun, Q., Kang, F., & Yang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703404 · Cited by 351
Zou, P., Wang, Y., Chiang, S.-W., Wang, X., Kang, F., & Yang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-02888-8 · Cited by 319
A “cation-anion regulation” synergistic anode host for dendrite-free lithium metal batteries
Zhang, W., Zhuang, H. L., Fan, L., Gao, L., & Lu, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar4410 · Cited by 299
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Wu, S., Zhang, Z., Lan, M., Yang, S., Cheng, J., Cai, J., Shen, J., Zhu, Y., Zhang, K., & Zhang, W. (2018) · Advanced Materials · doi:10.1002/adma.201705830 · Cited by 288
Xue, P., Liu, S., Shi, X., Sun, C., Lai, C., Zhou, Y., Sui, D., Chen, Y., & Liang, J. (2018) · Advanced Materials · doi:10.1002/adma.201804165 · Cited by 257
Fan, L., Zhuang, H. L., Zhang, W., Fu, Y., Liao, Z., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703360 · Cited by 232
An Ultrastrong Double-Layer Nanodiamond Interface for Stable Lithium Metal Anodes
Liu, Y., Tzeng, Y.-K., Lin, D., Pei, A., Lu, H., Melosh, N. A., Shen, Z.-X., Chu, S., & Cui, Y. (2018) · Joule · doi:10.1016/j.joule.2018.05.007 · Cited by 217
Self-citationChen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216
Zhang, R., Wen, S., Wang, N., Qin, K., Liu, E., Shi, C., & Zhao, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800914 · Cited by 216
Graphitic Carbon Nitride Induced Micro‐Electric Field for Dendrite‐Free Lithium Metal Anodes
Lu, Z., Liang, Q., Wang, B., Tao, Y., Zhao, Y., Lv, W., Liu, D., Zhang, C., Weng, Z., Liang, J., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803186 · Cited by 216
Self-citationShi, Y., Jiang, S., Zhou, K., Bao, C., Yu, B., Qian, X., Wang, B., Hong, N., Wen, P., Gui, Z., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4044932 · Cited by 192
Layer Structured Materials for Advanced Energy Storage and Conversion
Guo, Y., Wei, Y., Li, H., & Zhai, T. (2017) · Small · doi:10.1002/smll.201701649 · Cited by 183
Self-citationZuo, T., Yin, Y., Wang, S., Wang, P., Yang, X., Liu, J., Yang, C., & Guo, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04136 · Cited by 139
Self-citationWang, M., Peng, Z., Luo, W., Ren, F., Li, Z., Zhang, Q., He, H., Ouyang, C., & Wang, D. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802912 · Cited by 136
Hu, J., Tian, J., & Li, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00478 · Cited by 131
Xie, J., Ye, J., Pan, F., Sun, X., Ni, K., Yuan, H., Wang, X., Shu, N., Chen, C. H., & Zhu, Y. (2018) · Advanced Materials · doi:10.1002/adma.201805654 · Cited by 123
Li, Y., Li, Y., Sun, Y., Butz, B., Yan, K., Koh, A. L., Zhao, J., Pei, A., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02630 · Cited by 113
Self-citationIn Situ Formation of Stable Interfacial Coating for High Performance Lithium Metal Anodes
Wu, H., Cao, Y., Geng, L., & Wang, C. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05475 · Cited by 109
Interfacial lithium-ion transfer at the LiMn2O4 thin film electrode/aqueous solution interface
Nakayama, N., Nozawa, T., Iriyama, Y., Abe, T., Ogumi, Z., & Kikuchi, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.113 · Cited by 80
Toward an Atomistic Understanding of Solid-State Electrochemical Interfaces for Energy Storage
Augustyn, V., McDowell, M. T., & Vojvodić, A. (2018) · Joule · doi:10.1016/j.joule.2018.10.014 · Cited by 37
Cited by
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Akhundi, A., Badiei, A., Ziarani, G. M., Habibi-Yangjeh, A., Muñoz-Batista, M. J., & Luque, R. (2020) · Molecular Catalysis · doi:10.1016/j.mcat.2020.110902 · Cited by 496
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
2D Graphitic Carbon Nitride for Energy Conversion and Storage
Wang, Y., Liu, L., Ma, T., Zhang, Y., & Huang, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102540 · Cited by 448
Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
Metadata
- Authors
- Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-05-16
- Volume
- 31
- Issue
- 27
- Pages
- e1900342-e1900342
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2945728769
- Cited by
- 314
- References
- 55
- FWCI
- 12.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.