The DOI matches its Crossref record; 149 of the 149 references it cites were found in a registry or an index.
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Open accessAbstract
All‐inorganic perovskites are considered to be one of the most appealing research hotspots in the field of perovskite photovoltaics in the past 3 years due to their superior thermal stability compared to their organic–inorganic hybrid counterparts. The power‐conversion efficiency has reached 17.06% and the number of important publications is ever increasing. Here, the progress of inorganic perovskites is systematically highlighted, covering materials design, preparation of high‐quality perovskite films, and avoidance of phase instabilities. Inorganic perovskites, nanocrystals, quantum dots, and lead‐free compounds are discussed and the corresponding device performances are reviewed, which have been realized on both rigid and flexible substrates. Methods for stabilization of the cubic phase of low‐bandgap inorganic perovskites are emphasized, which is a prerequisite for highly efficient and stable solar cells. In addition, energy loss mechanisms both in the bulk of the perovskite and at the interfaces of perovskite and charge selective layers are unraveled. Reported approaches to reduce these charge‐carrier recombination losses are summarized and complemented by methods proposed from our side. Finally, the potential of inorganic perovskites as stable absorbers is assessed, which opens up new perspectives toward the commercialization of inorganic perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Self-citationSurface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citationA mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Toxicity of organometal halide perovskite solar cells
Babayigit, A., Ethirajan, A., Muller, M., & Conings, B. (2016) · Nature Materials · doi:10.1038/nmat4572 · Cited by 1,533
Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit
Pan, W., Wu, H., Luo, J., Deng, Z., Ge, C., Chen, C., Jiang, X., Yin, W.-J., Niu, G., Zhu, L., et al. (2017) · Nature Photonics · doi:10.1038/s41566-017-0012-4 · Cited by 1,416
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Amat, A., Mosconi, E., Ronca, E., Quarti, C., Umari, P., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2014) · Nano Letters · doi:10.1021/nl5012992 · Cited by 1,285
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Self-citationLead Halide Perovskite Nanocrystals in the Research Spotlight: Stability and Defect Tolerance
Huang, H., Bodnarchuk, M. I., Kershaw, S. V., Kovalenko, M. V., & Rogach, A. L. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00547 · Cited by 1,236
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
A CsPbBr3 Perovskite Quantum Dot/Graphene Oxide Composite for Photocatalytic CO2 Reduction
Xu, Y.-F., Yang, M.-Z., Chen, B.-X., Wang, X.-D., Chen, H.-Y., Kuang, D.-B., & Su, C.-Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b00489 · Cited by 1,180
Cs2InAgCl6: A New Lead-Free Halide Double Perovskite with Direct Band Gap
Volonakis, G., Haghighirad, A. A., Milot, R. L., Sio, W. H., Filip, M. R., Wenger, B., Johnston, M. B., Herz, L. M., Snaith, H. J., & Giustino, F. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02682 · Cited by 1,176
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Toward Lead-Free Perovskite Solar Cells
Giustino, F., & Snaith, H. J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00499 · Cited by 1,141
Kulbak, M., Cahen, D., & Hodes, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00968 · Cited by 1,103
A Eu 3+ -Eu 2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Wang, L., Zhou, H., Hu, J., Huang, B., Sun, M., Dong, B., Zheng, G., Huang, Y., Chen, Y., Li, L., et al. (2019) · Science · doi:10.1126/science.aau5701 · Cited by 1,093
All-Inorganic Perovskite Solar Cells
Liang, J., Wang, C., Wang, Y., Xu, Z., Lu, Z., Ma, Y., Zhu, H., Hu, Y., Xiao, C., Yi, X., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10227 · Cited by 1,089
Bright triplet excitons in caesium lead halide perovskites
Becker, M. A., Vaxenburg, R., Nedelcu, G., Sercel, P. C., Shabaev, A., Mehl, M. J., Michopoulos, J. G., Lambrakos, S. G., Bernstein, N., Lyons, J. L., et al. (2018) · Nature · doi:10.1038/nature25147 · Cited by 1,031
Design of Lead-Free Inorganic Halide Perovskites for Solar Cells via Cation-Transmutation
Zhao, X.-G., Yang, J.-H., Fu, Y., Yang, D., Xu, Q., Yu, L., Wei, S.-H., & Zhang, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09645 · Cited by 1,003
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Mn2+-Doped Lead Halide Perovskite Nanocrystals with Dual-Color Emission Controlled by Halide Content
Liu, W., Lin, Q., Li, H., Wu, K., Robel, I., Pietryga, J. M., & Klimov, V. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08085 · Cited by 898
(2020) · INDIGO (University of Illinois at Chicago) · doi:10.1021/jacs.5b13294.s002 · Cited by 892
Zhou, Q., Bai, Z., Lu, W., Wang, Y., Zou, B., & Zhong, H. (2016) · Advanced Materials · doi:10.1002/adma.201602651 · Cited by 781
Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications
Greul, E., Petrus, M. L., Binek, A., Docampo, P., & Bein, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06816f · Cited by 772
Chen, M., Ju, M.-G., Garces, H. F., Carl, A. D., Ono, L. K., Hawash, Z., Zhang, Y., Shen, T., Qi, Y., Grimm, R. L., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07951-y · Cited by 759
Marronnier, A., Roma, G., Boyer-Richard, S., Pedesseau, L., Jancu, J.-M., Bonnassieux, Y., Katan, C., Stoumpos, C. C., Kanatzidis, M. G., & Even, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b00267 · Cited by 753
Shi, Z., Guo, J., Chen, Y., Li, Q., Pan, Y., Zhang, H., Xia, Y., & Huang, W. (2017) · Advanced Materials · doi:10.1002/adma.201605005 · Cited by 735
Organolead Halide Perovskite: New Horizons in Solar Cell Research
Kim, H.-S., Im, S. H., & Park, N.-G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp409025w · Cited by 722
Strongly emissive perovskite nanocrystal inks for high-voltage solar cells
Akkerman, Q. A., Gandini, M., Di Stasio, F., Rastogi, P., Palazon, F., Bertoni, G., Ball, J. M., Prato, M., Petrozza, A., & Manna, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.194 · Cited by 721
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Li, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics
Marshall, K. P., Walker, M., Walton, R. I., & Hatton, R. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.178 · Cited by 644
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Maughan, A. E., Ganose, A. M., Bordelon, M. M., Miller, E. M., Scanlon, D. O., & Neilson, J. R. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03207 · Cited by 626
Juarez-Perez, E. J., Ono, L. K., Maeda, M., Jiang, Y., Hawash, Z., & Qi, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03501f · Cited by 626
Cesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells
Chen, M., Ju, M.-G., Carl, A. D., Zong, Y., Grimm, R. L., Gu, J., Zeng, X. C., Zhou, Y., & Padture, N. P. (2018) · Joule · doi:10.1016/j.joule.2018.01.009 · Cited by 607
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Self-citationImportance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells
Song, T.-B., Yokoyama, T., Stoumpos, C. C., Logsdon, J., Cao, D. H., Wasielewski, M. R., Aramaki, S., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10734 · Cited by 598
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
The Dawn of Lead‐Free Perovskite Solar Cell: Highly Stable Double Perovskite Cs2AgBiBr6 Film
Wu, C., Zhang, Q., Liu, Y., Luo, W., Guo, X., Huang, Z., Ting, H., Sun, W., Zhong, X., Wei, S., et al. (2018) · Advanced Science · doi:10.1002/advs.201700759 · Cited by 571
Coherent single-photon emission from colloidal lead halide perovskite quantum dots
Utzat, H., Sun, W., Kaplan, A. E. K., Krieg, F., Ginterseder, M., Spokoyny, B., Klein, N. D., Shulenberger, K. E., Perkinson, C. F., Kovalenko, M. V., et al. (2019) · Science · doi:10.1126/science.aau7392 · Cited by 565
Bandgap Engineering of Lead‐Free Double Perovskite Cs2AgBiBr6 through Trivalent Metal Alloying
Du, K., Meng, W., Wang, X., Yan, Y., & Mitzi, D. B. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703970 · Cited by 563
Qiu, X., Cao, B., Yuan, S., Chen, X., Qiu, Z., Jiang, Y., Ye, Q., Wang, H., Zeng, H., Liu, J., et al. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.09.022 · Cited by 556
Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Bismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells
Hu, Y., Bai, F., Liu, X., Ji, Q., Miao, X., Qiu, T., & Zhang, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00508 · Cited by 547
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Nam, J. K., Chai, S. U., Cha, W., Choi, Y. J., Kim, W., Jung, M. S., Kwon, J., Kim, D., & Park, J. H. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00050 · Cited by 524
High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency
Duan, J., Zhao, Y., He, B., & Tang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800019 · Cited by 514
Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy
Feng, J., Zhu, X., Yang, Z., Zhang, X., Niu, J., Wang, Z., Zuo, S., Priya, S., Liu, S. (., & Yang, D. (2018) · Advanced Materials · doi:10.1002/adma.201801418 · Cited by 484
Jiang, Y., Qiu, L., Juarez-Perez, E. J., Ono, L. K., Hu, Z., Liu, Z., Wu, Z., Meng, L., Wang, Q., & Qi, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0406-2 · Cited by 484
Ju, M.-G., Chen, M., Zhou, Y., Garces, H. F., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01167 · Cited by 476
Improving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Zeng, Q., Zhang, X., Feng, X., Lu, S., Chen, Z., Yong, X., Redfern, S. A. T., Wei, H., Wang, H., Shen, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705393 · Cited by 464
Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells
Xiang, W., Wang, Z., Kubicki, D. J., Tress, W., Luo, J., Prochowicz, D., Akin, S., Emsley, L., Zhou, J., Dietler, G., et al. (2019) · Joule · doi:10.1016/j.joule.2018.10.008 · Cited by 460
Self-citationRecent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Gao, W., Ran, C., Xi, J., Jiao, B., Zhang, W., Wu, M., Hou, X., & Wu, Z. (2018) · ChemPhysChem · doi:10.1002/cphc.201800346 · Cited by 436
Ma, Q., Huang, S., Wen, X., Green, M. A., & Ho‐Baillie, A. W. Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502202 · Cited by 433
Lyu, M., Yun, J., Chen, P., Hao, M., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602512 · Cited by 432
Wu, W.-Q., Wang, Q., Fang, Y., Shao, Y., Tang, S., Deng, Y., Lu, H., Liu, Y., Li, T., Yang, Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04028-8 · Cited by 430
Reduced-Dimensional α-CsPbX3 Perovskites for Efficient and Stable Photovoltaics
Jiang, Y., Yuan, J., Ni, Y., Yang, J., Wang, Y., Jiu, T., Yuan, M., & Chen, J. (2018) · Joule · doi:10.1016/j.joule.2018.05.004 · Cited by 429
Sabba, D., Mulmudi, H. K., Prabhakar, R. R., Krishnamoorthy, T., Baikie, T., Boix, P. P., Mhaisalkar, S., & Mathews, N. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp5126624 · Cited by 421
Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes
Zou, W., Li, R., Zhang, S., Liu, Y., Wang, N., Cao, Y., Miao, Y., Xu, M., Guo, Q., Di, D., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03049-7 · Cited by 417
Wheeler, L. M., Sanehira, E. M., Marshall, A. R., Schulz, P., Suri, M., Anderson, N. C., Christians, J. A., Nordlund, D., Sokaras, D., Kroll, T., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04984 · Cited by 412
Bai, D., Zhang, J., Jin, Z., Bian, H., Wang, K., Wang, H., Liang, L., Wang, Q., & Liu, S. F. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00270 · Cited by 410
Interface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802509 · Cited by 404
Li, W., Fan, J., Li, J., Mai, Y., & Wang, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06444 · Cited by 398
Chen, C., Lin, H., Chiang, K., Tsai, W., Huang, Y., Tsao, C., & Lin, H. (2017) · Advanced Materials · doi:10.1002/adma.201605290 · Cited by 395
Kubicki, D. J., Prochowicz, D., Hofstetter, A., Zakeeruddin, S. M., Grätzel, M., & Emsley, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07223 · Cited by 387
Liu, F., Ding, C., Zhang, Y., Ripolles, T. S., Kamisaka, T., Toyoda, T., Hayase, S., Minemoto, T., Yoshino, K., Dai, S., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08628 · Cited by 385
Hoffman, J. B., Schleper, A. L., & Kamat, P. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04661 · Cited by 371
Graded Bandgap CsPbI2+Br1− Perovskite Solar Cells with a Stabilized Efficiency of 14.4%
Bian, H., Bai, D., Jin, Z., Wang, K., Liang, L., Wang, H., Zhang, J., Wang, Q., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.04.012 · Cited by 366
Song, T.-B., Yokoyama, T., Aramaki, S., & Kanatzidis, M. G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00171 · Cited by 352
Efficient photosynthesis of carbon monoxide from CO2 using perovskite photovoltaics
Schreier, M., Curvat, L., Giordano, F., Steier, L., Abate, A., Zakeeruddin, S. M., Luo, J., Mayer, M. T., & Grätzel, M. (2015) · Nature Communications · doi:10.1038/ncomms8326 · Cited by 348
Zhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703246 · Cited by 338
Liu, X., Tan, X., Liu, Z., Ye, H., Sun, B., Shi, T., Tang, Z., & Liao, G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.053 · Cited by 338
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Efficiency Limit of Perovskite/Si Tandem Solar Cells
Futscher, M. H., & Ehrler, B. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00405 · Cited by 324
Li, W., Li, J., Li, J., Fan, J., Mai, Y., & Wang, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08332c · Cited by 318
Li, X., Yu, D., Chen, J., Wang, Y., Cao, F., Wei, Y., Wu, Y., Wang, L., Zhu, Y., Sun, Z., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b08194 · Cited by 316
Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films
Jiang, Q., Rebollar, D., Gong, J., Piacentino, E. L., Zheng, C., & Xu, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503038 · Cited by 310
Frolova, L. A., Anokhin, D. V., Piryazev, A. A., Luchkin, S. Y., Dremova, N. N., Stevenson, K. J., & Troshin, P. A. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02594 · Cited by 307
Roll-to-Roll Printing of Perovskite Solar Cells
Dou, B., Whitaker, J. B., Bruening, K., Moore, D. T., Wheeler, L. M., Ryter, J., Breslin, N. J., Berry, J. J., Garner, S. M., Barnes, F. S., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01556 · Cited by 304
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
High‐Performance Single‐Crystalline Perovskite Thin‐Film Photodetector
Yang, Z., Deng, Y., Zhang, X., Wang, S., Chen, H., Yang, S., Khurgin, J., Fang, N. X., Zhang, X., & Ma, R. (2018) · Advanced Materials · doi:10.1002/adma.201704333 · Cited by 301
On the Thermal and Thermodynamic (In)Stability of Methylammonium Lead Halide Perovskites
Brunetti, B., Cavallo, C., Ciccioli, A., Gigli, G., & Latini, A. (2016) · Scientific Reports · doi:10.1038/srep31896 · Cited by 268
Jacobsson, T. J., Pazoki, M., Hagfeldt, A., & Edvinsson, T. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06436 · Cited by 260
Yang, B., Wang, M., Hu, X., Zhou, T., & Zang, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.097 · Cited by 249
Fundamental Carrier Lifetime Exceeding 1 µs in Cs2AgBiBr6 Double Perovskite
Hoye, R. L. Z., Eyre, L., Wei, F., Brivio, F., Sadhanala, A., Sun, S., Li, W., Zhang, K. H. L., MacManus‐Driscoll, J. L., Bristowe, P. D., et al. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800464 · Cited by 240
Coherent single-photon emission from colloidal lead halide perovskite quantum dotsPreprint
Utzat, H., Sun, W., Kaplan, A. E., Krieg, F., Ginterseder, M., Spokoyny, B., Klein, N. D., Shulenberger, K. E., Perkinson, C. F., Kovalenko, M. V., et al. (2019) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 239
Highly Efficient Visible Colloidal Lead-Halide Perovskite Nanocrystal Light-Emitting Diodes
Yan, F., Xing, J., Xing, G., Quan, L., Tan, S. T., Zhao, J., Su, R., Zhang, L., Chen, S., Zhao, Y., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00789 · Cited by 238
Stabilization of α-CsPbI3 in Ambient Room Temperature Conditions by Incorporating Eu into CsPbI3
Jena, A. K., Kulkarni, A., Sanehira, Y., Ikegami, M., & Miyasaka, T. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01808 · Cited by 238
Lau, C. F. J., Deng, X., Zheng, J., Kim, J., Zhang, Z., Zhang, M., Bing, J., Wilkinson, B., Hu, L., Patterson, R., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11154a · Cited by 236
Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells
Li, N., Zhu, Z., Li, J., Jen, A. K. ‐., & Wang, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800525 · Cited by 236
Liu, C., Li, W., Li, H., Wang, H., Zhang, C., Yang, Y., Gao, X., Xue, Q., Yip, H., Fan, J., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803572 · Cited by 231
Lee, B., Krenselewski, A., Baik, S. I., Seidman, D. N., & Chang, R. P. H. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00100b · Cited by 228
Wu, Y., Wang, P., Guan, Z., Liu, J., Wang, Z., Zheng, Z., Jin, S., Dai, Y., Whangbo, M.-H., & Huang, B. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02374 · Cited by 221
Wang, Q., Jin, Z., Chen, D., Bai, D., Bian, H., Sun, J., Zhu, G., Wang, G., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800007 · Cited by 219
Marshall, K. P., Walton, R. I., & Hatton, R. A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02950c · Cited by 213
Liu, C., Li, W., Chen, J., Fan, J., Mai, Y., & Schropp, R. E. I. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.048 · Cited by 213
Bai, D., Bian, H., Jin, Z., Wang, H., Meng, L., Wang, Q., & (Frank) Liu, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.012 · Cited by 208
Hu, Y., Aygüler, M. F., Petrus, M. L., Bein, T., & Docampo, P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00731 · Cited by 205
Superior stability for perovskite solar cells with 20% efficiency using vacuum co-evaporation
Zhu, X., Yang, D., Yang, R., Yang, B., Yang, Z., Ren, X., Zhang, J., Niu, J., Feng, J., & Liu, S. (. (2017) · Nanoscale · doi:10.1039/c7nr04501h · Cited by 203
All‐Inorganic CsPb1−xGexI2Br Perovskite with Enhanced Phase Stability and Photovoltaic Performance
Yang, F., Hirotani, D., Kapil, G., Kamarudin, M. A., Ng, C. H., Zhang, Y., Shen, Q., & Hayase, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807270 · Cited by 186
Efficient planar CsPbBr3 perovskite solar cells by dual-source vacuum evaporation
Lei, J., Gao, F., Wang, H., Li, J., Jiang, J., Wu, X., Gao, R., Yang, Z., & Liu, S. (. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.07.009 · Cited by 182
Heo, J. H., Kim, J., Kim, H., Moon, S. H., Im, S. H., & Hong, K.-H. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b02555 · Cited by 175
Pazoki, M., Jacobsson, T. J., Hagfeldt, A., Boschloo, G., & Edvinsson, T. (2016) · Physical Review B · doi:10.1103/physrevb.93.144105 · Cited by 170
Dong, C., Han, X., Zhao, Y., Li, J., Chang, L., & Zhao, W. (2018) · Solar RRL · doi:10.1002/solr.201800139 · Cited by 159
Dong, C., Han, X., Li, W., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.02.075 · Cited by 155
Li, H., Tong, G., Chen, T., Zhu, H., Li, G., Chang, Y., Wang, L., & Jiang, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03811b · Cited by 151
Sheikh, M. S., Ghosh, D., Dutta, A., Bhattacharyya, S., & Sinha, T. P. (2017) · Materials Science and Engineering B · doi:10.1016/j.mseb.2017.08.027 · Cited by 148
Role of GeI2 and SnF2 additives for SnGe perovskite solar cells
Ng, C. H., Nishimura, K., Ito, N., Hamada, K., Hirotani, D., Wang, Z., Yang, F., likubo, S., Shen, Q., Yoshino, K., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.026 · Cited by 148
Octahedral Rotation Preferences in Perovskite Iodides and Bromides
Young, J., & Rondinelli, J. M. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00094 · Cited by 144
Zhang, S., Wu, S., Chen, W., Zhu, H., Xiong, Z., Yang, Z., Chen, C., Chen, R., Han, L., & Chen, W. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.03.006 · Cited by 144
Liu, Z., Sun, B., Liu, X., Han, J., Ye, H., Shi, T., Tang, Z., & Liao, G. (2018) · Nano-Micro Letters · doi:10.1007/s40820-018-0187-3 · Cited by 142
Rao, H., Ye, S., Gu, F., Zhao, Z., Liu, Z., Bian, Z., & Huang, C. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800758 · Cited by 141
Multipass inkjet printed planar methylammonium lead iodide perovskite solar cells
Mathies, F., Abzieher, T., Hochstuhl, A., Glaser, K., Colsmann, A., Paetzold, U. W., Hernandez‐Sosa, G., Lemmer, U., & Quintilla, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07972e · Cited by 138
Park, M.-C., Cho, W., Lee, G., et al. (2018) · Small · doi:10.1002/smll.201804005 · Cited by 137
Octahedral tilting instabilities in inorganic halide perovskites
Bechtel, J. S., & der Ven, A. V. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.025401 · Cited by 134
Sánchez, S., Neururer, C., Grobéty, B., Phung, N., Steiner, U., Saliba, M., & Abate, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802060 · Cited by 129
Low Temperature Fabrication for High Performance Flexible CsPbI2Br Perovskite Solar Cells
Jiang, H. L., Feng, J., Zhao, H., Li, G., Yin, G., Han, Y., Yan, F. Y., Liu, Z., & Liu, S. F. (2018) · Advanced Science · doi:10.1002/advs.201801117 · Cited by 126
He, J., Vasenko, A. S., Long, R., & Prezhdo, O. V. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00446 · Cited by 124
Electronic structure of the CsPbBr3/polytriarylamine (PTAA) system
Endres, J. J., Kulbak, M., Zhao, L., Rand, B. P., Cahen, D., Hodes, G., & Kahn, A. (2017) · Journal of Applied Physics · doi:10.1063/1.4974471 · Cited by 123
Large area perovskite solar cell module
Cai, L., Liang, L., Wu, J., Ding, B., Gao, L., & Fan, B. (2017) · Journal of Semiconductors · doi:10.1088/1674-4926/38/1/014006 · Cited by 119
Wang, L., Zou, X., Lin, J., Jiang, J., Liu, Y., Liu, X., Zhao, X., Liu, Y. F., Ho, J. C. Y., & Liao, L. (2019) · ACS Nano · doi:10.1021/acsnano.9b01713 · Cited by 112
Zhang, J., Jin, Z., Liang, L., Wang, H., Bai, D., Bian, H., Wang, K., Wang, Q., Yuan, N., Ding, J., et al. (2018) · Advanced Science · doi:10.1002/advs.201801123 · Cited by 107
Lim, J. W., Wang, H., Choi, C. H., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.12.068 · Cited by 65
Room Temperature Processing of Inorganic Perovskite Films to Enable Flexible Solar Cells
Liu, D., Yang, C., Bates, M., & Lunt, R. R. (2018) · iScience · doi:10.1016/j.isci.2018.08.005 · Cited by 56
Bechtel, J. S., & der Ven, A. V. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.045401 · Cited by 42
Effect of diphenylphosphinic acid on cesium lead iodide perovskite stability
Mubiayi, K. P., Moloto, N., & Moloto, M. J. (2018) · CrystEngComm · doi:10.1039/c8ce00934a · Cited by 20
Cited by
Recent progress of zero-dimensional luminescent metal halides
Li, M., & Xia, Z. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00779j · Cited by 879
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Self-citationAhmed, S., Jannat, F., Khan, M. A. K., & Alim, M. A. (2021) · Optik · doi:10.1016/j.ijleo.2020.165765 · Cited by 345
Gu, X., Xiang, W., Tian, Q., & Liu, S. (. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202109724 · Cited by 342
Self-citationThe Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Metadata
- Authors
- Xiang, W., & Tress, W.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-09-03
- Volume
- 31
- Issue
- 44
- Pages
- e1902851-e1902851
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2971782071
- Cited by
- 454
- References
- 149
- FWCI
- 20.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.