Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Open accessThe DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor‐based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser‐induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat‐sensitive polymer substrates due to the low‐temperature requirements of the process. As a proof of concept, temperature‐sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The negative temperature coefficient (NTC) thermistor has a clear advantage over other temperature sensors in that it exhibits a much simpler structure while presenting equivalently high temperature sensitivity.[215]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [215]
Experimental — accuracy not yet measuredIn the citing paper
“It revealed a notable 27% rise in respiratory rate and a significant 65% reduction in temperature variation amplitude, indicating shallow breath, when confronted with low blood oxygen saturation levels.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“It has been demonstrated that it can capture small temperature variations associated with inhalation and exhalation. Besides, it was also able to accurately monitor changes in respiration patterns during intense physical activities.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“The nickel oxide (NiO) temperature sensor can be conformably attached to various curvatures on the facial surface, enabling continuous and accurate measurement of physiological temperature over long periods.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable silicon nanoribbon electronics for skin prosthesis
Kim, J., Lee, M., Shim, H. J., Ghaffari, R., Cho, H. R., Son, D., Jung, Y. H., Soh, M., Choi, C., Jung, S., et al. (2014) · Nature Communications · doi:10.1038/ncomms6747 · Cited by 1,435
Self-citationSomeya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
Reproducible resistance switching in polycrystalline NiO films
Seo, S., Lee, M. J., Seo, D. H., Jeoung, E. J., Suh, D.-S., Joung, Y. S., Yoo, I. K., Hwang, I. R., Kim, S. H., Byun, I. S., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1831560 · Cited by 933
Self-citationElectrical and Optical Properties of Narrow-Band Materials
Adler, D., & Feinleib, J. (1970) · Physical Review B · doi:10.1103/physrevb.2.3112 · Cited by 874
Trung, T. Q., Ramasundaram, S., Hwang, B., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504441 · Cited by 870
Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective
Feteira, A. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02990.x · Cited by 711
Mu, Y., Jia, D., He, Y., Miao, Y., & Wu, H.-L. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.11.042 · Cited by 466
Highly Stretchy Black Gold E‐Skin Nanopatches as Highly Sensitive Wearable Biomedical Sensors
Gong, S., Lai, D. T. H., Su, B., Si, K. J., Ma, Z., Yap, L. W., Guo, P., & Cheng, W. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201400063 · Cited by 461
A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature
Tien, N. T., Jeon, S., Kim, D., Trung, T. Q., Jang, M., Hwang, B., Byun, K., Bae, J., Lee, E., Tok, J. B. ‐., et al. (2014) · Advanced Materials · doi:10.1002/adma.201302869 · Cited by 438
Critical review of non-invasive respiratory monitoring in medical care
Folke, M., Cernerud, L., Ekström, M., & Hök, B. (2003) · Medical & Biological Engineering & Computing · doi:10.1007/bf02348078 · Cited by 430
Research works printed but not linked: 2
- Ryu J., 2009, J. Am. Chem. Soc., 92, 3084
- Mironova‐Ulmane N., 2011, Cent. Eur. J. Phys., 9, 1096
Cited by
Items 101–200 of 491
Laser digital patterning of conductive electrodes using metal oxide nanomaterials
Nam, V. B., Giang, T. T., Koo, S.-M., Rho, J., & Lee, D. (2020) · Nano Convergence · doi:10.1186/s40580-020-00232-9 · Cited by 63
Self-citationNanomaterial-based flexible sensors for metaverse and virtual reality applications
Wang, J., Suo, J., Song, Z., Li, W. J., & Wang, Z. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acded1 · Cited by 62
Form‐Factor Free 3D Copper Circuits by Surface‐Conformal Direct Printing and Laser Writing
Jo, Y., Park, H. J., Kim, Y., Lee, S. S., Lee, S. Y., Kim, S., Choi, Y., & Jeong, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004659 · Cited by 62
Zou, J., Ma, Y., Liu, C., Xie, Y., Dai, X., Li, X., Li, S., Peng, S., Yang, Y., Wang, S., et al. (2024) · InfoMat · doi:10.1002/inf2.12545 · Cited by 61
Permeable Bioelectronics toward Biointegrated Systems
Lee, S., Liang, X., Kim, J. S., Yokota, T., Fukuda, K., & Someya, T. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00823 · Cited by 61
Self-citationTransparent photovoltaic skin for artificial thermoreceptor and nociceptor memory
Bhatnagar, P. K., Hong, J., Patel, M., & Kim, J. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106676 · Cited by 58
Self-citationGeng, Y., Cao, R., Innocent, M. T., Hu, Z., Zhu, L., Wang, L., Xiang, H., & Zhu, M. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107269 · Cited by 57
Latest developments and trends in electronic skin devices
Zhu, P., Li, Z., Pang, J., He, P., & Zhang, S. (2024) · Soft Science · doi:10.20517/ss.2024.05 · Cited by 58
Recent advances in the material design for intelligent wearable devices
Wu, Y., Li, Y., Tao, Y., Sun, L., & Yu, C. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00076a · Cited by 56
Mn4+ activated phosphors in photoelectric and energy conversion devices
Ding, Y., Wang, C., Pei, L., Mao, Q., Bandaru, S., Zheng, R., Maitra, S., Liu, M., Chen, L., Su, B., et al. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2023.07.033 · Cited by 56
Liu, J., Li, Z., Sun, M., Zhou, L., Wu, X., Lu, Y., Shao, Y., Liu, C., Huang, N., Hu, B., et al. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2412423121 · Cited by 56
Wang, J., Chen, R., Ji, D., Xu, W., Zhang, W., Zhang, C., Zhou, W., & Luo, T. (2023) · Small · doi:10.1002/smll.202307800 · Cited by 55
Exhaled Breath Analysis: From Laboratory Test to Wearable Sensing
Heng, W., Yin, S., Chen, Y., & Gao, W. (2024) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2024.3481360 · Cited by 55
Digital manufacturing of functional materials for wearable electronics
Lin, J., Zhu, Z., Cheung, C. F., Yan, F., & Li, G. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01112f · Cited by 54
Toward a new generation of permeable skin electronics
Yang, J., Zhang, Z., Zhou, P., Zhang, Y., Liu, Y., Xu, Y., Gu, Y., Qin, S., Haick, H., & Wang, Y. (2023) · Nanoscale · doi:10.1039/d2nr06236d · Cited by 54
Wang, X., Hassan, A., Boudaoud, H., Xue, F., Zhou, Z., & Liu, X. (2023) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-023-00740-2 · Cited by 53
Emerging applications of metal-oxide thin films for flexible and stretchable electronic devices
Dong, D., Dhanabalan, S. S., Elango, P. F. M., Yang, M., Walia, S., Sriram, S., & Bhaskaran, M. C. (2023) · Applied Physics Reviews · doi:10.1063/5.0151297 · Cited by 54
Robust self-gated-carriers enabling highly sensitive wearable temperature sensors
Zhang, H., Xu, K., Lu, Y., Liu, H., Han, W., Zhao, Y., Li, R., Nie, Z., Xu, F., Zhu, J., et al. (2021) · Applied Physics Reviews · doi:10.1063/5.0059204 · Cited by 53
Advances in flexible sensors with MXene materials
Jiang, J. S., Chen, X., Niu, Y. F., He, X., Hu, Y., & Wang, C. (2022) · New Carbon Materials · doi:10.1016/s1872-5805(22)60589-4 · Cited by 53
Sun, B., Xu, G., Xu, J., Yang, Z., Guan, C., Chen, S., Chen, X., Ma, Y., Yu, Y., & Feng, J. (2024) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2024.115059 · Cited by 52
Chen, C., Liu, Z., Guo, L., Huo, B., Sun, Q., Liang, L., Du, C., & Chen, G. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202411490 · Cited by 52
Vitazkova, D., Kosnacova, H., Turonova, D., Foltan, E., Jagelka, M., Berki, M., Micjan, M., Kokavec, O., Gerhat, F., & Vavrinský, E. (2025) · Biosensors · doi:10.3390/bios15020117 · Cited by 52
Highly Sensitive Flexible Temperature Sensor Made Using PEDOT:PSS/PANI
Song, J., Wei, Y., Xu, M., Gao, J., Luo, L., Wu, H., Li, X., Li, Y., & Wang, X. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01224 · Cited by 49
Advanced thermal sensing techniques for characterizing the physical properties of skin
Madhvapathy, S. R., Arafa, H., Patel, M. J., Winograd, J., Kong, J., Zhu, J., Xu, S., & Rogers, J. A. (2022) · Applied Physics Reviews · doi:10.1063/5.0095157 · Cited by 48
Semiconductor Plasmon Enhanced Upconversion toward a Flexible Temperature Sensor
Zhang, W., Huang, X., Liu, W., Gao, Z., Zhong, L., Qin, Y., Li, B., & Li, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c18412 · Cited by 48
E-Skin and Its Advanced Applications in Ubiquitous Health Monitoring
Sun, X., Guo, X., Gao, J., Wu, J., Huang, F., Zhang, J., Huang, F., Lu, X. J., Shi, Y., & Pan, L. (2024) · Biomedicines · doi:10.3390/biomedicines12102307 · Cited by 48
Yoo, H., Kim, E., Chung, J. W., Cho, H. K., Jeong, S., Kim, H., Jang, D., Kim, H., Yoon, J., Lee, G. H., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c14918 · Cited by 47
Self-citationMoudgil, A., Hou, K., Li, T., & Leong, W. L. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300605 · Cited by 47
Yu, J., Zhang, K., & Deng, Y. (2021) · Soft Science · doi:10.20517/ss.2021.05 · Cited by 46
Nam, V. B., Giang, T. T., & Lee, D. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.151179 · Cited by 46
Self-citationZhan, P., Zhai, W., Wei, W., Ding, P., Zheng, G., Dai, K., Liu, C., & Shen, C. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109720 · Cited by 45
Wearable Sensors for Plants: Status and Prospects
Yan, X., Pang, Y., Niu, K., Hu, B., Zhu, Z., Tan, Z., & Lei, H. (2025) · Biosensors · doi:10.3390/bios15010053 · Cited by 45
Du, C., Hu, Y., Xiao, X., Manshaii, F., Liang, L., Chen, J., & Chen, G. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01821-1 · Cited by 44
Xu, L., Wang, W., Zhang, L., Wang, D., & Zhang, A. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01345 · Cited by 44
Recent progress in three-dimensional flexible physical sensors
Zhang, F., Jin, T., Xue, Z., & Zhang, Y. (2022) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2022.2047827 · Cited by 44
Wu, J., Sang, M., Zhang, J., Sun, Y., Wang, X., Zhang, J., Pang, H., Luo, T., Pan, S., Xuan, S., et al. (2023) · Small · doi:10.1002/smll.202207454 · Cited by 44
Zhang, J., Xue, W., Dai, Y., Wu, C., Li, B., Guo, X., Liao, B., & Xue, W. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107572 · Cited by 45
Xu, L., Li, L., Tang, L., Zeng, Y., Chen, G., Shao, C., Wu, C., He, G., Chen, Q., Fang, G., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c20927 · Cited by 43
Yoon, K., Lee, S., Kwon, C., Won, C., Cho, S., Lee, S.-M., Lee, M., Lee, J., Lee, H., Jang, K., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202407759 · Cited by 43
Self-citationZhang, Y., Liu, Q., Ren, W., Song, Y., Luo, H., Han, Y., He, L., Wu, X., & Wang, Z. (2023) · Research · doi:10.34133/research.0172 · Cited by 42
Xu, L., Zhou, X., Zhao, F., Fu, Y., Tang, L., Zeng, Y., Chen, G., Wu, C., Wang, L., Chen, Q., et al. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.12.119 · Cited by 42
Metal oxide -based electrical/electrochemical sensors for health monitoring systems
Taheri, M., Deen, I. A., Packirisamy, M., & Deen, M. J. (2023) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2023.117509 · Cited by 42
Laser-assisted manufacturing for sensors
Han, J., Xin, D., Pang, J., Zhao, L., Sun, D., Yang, Z., Liu, X., Zhao, Z., Zhang, X., Sun, Q., et al. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/adbb35 · Cited by 41
Liu, Z., Liang, T., Xin, Y., Huang, J., Liang, J., He, X. M., Zhang, C., Yang, W., & He, X. H. (2021) · RSC Advances · doi:10.1039/d1ra03207k · Cited by 41
Ansari, H. R., Kordrostami, Z., & Mirzaei, A. (2023) · Scientific Reports · doi:10.1038/s41598-023-34313-6 · Cited by 41
Li, Z., Wu, Z., Li, Z. C., Ou, L., Zhang, W., Lai, Z., Zhang, Y., Xie, M., Tang, J., Zhu, W., et al. (2023) · Photonics Research · doi:10.1364/prj.492840 · Cited by 41
Zhu, Z., Su, Y., Chen, J., Zhang, J., Liang, L., Nie, Z., Tang, W., Liang, Y., & Li, H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c11251 · Cited by 40
Bio-Inspired Ionic Sensors: Transforming Natural Mechanisms into Sensory Technologies
Choi, K., Lee, G., Lee, M., Hwang, H. J., Lee, K., & Lee, Y. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01692-6 · Cited by 41
Cai, T., Yan, Y., Park, Y., Lee, T., Peng, D., Liu, Y., Ha, C., & Kim, K. C. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00062 · Cited by 40
Nuthalapati, S., Shirhatti, V., Kedambaimoole, V., Veera Pandi, N., Takao, H., Nayak, M. M., & Rajanna, K. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.113314 · Cited by 40
Flexible Thermoelectrics Based on Plastic Inorganic Semiconductors
Chen, K., Wang, L., Luo, Z., Xu, X., Li, Y., Liu, S., & Zhao, Q. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300189 · Cited by 40
Liu, H., Qin, J., Yang, X., Lv, C., Huang, W., Li, F., Zhang, C., Wu, Y., Dong, L. R., & Shan, C. (2023) · Nano Research · doi:10.1007/s12274-023-5837-1 · Cited by 40
Self-calibrated multi-mode optical thermometry in up-converting phosphor Cs2NaErCl6: Yb3+
Chen, W., Jin, M., Tang, J., Li, Y., Chen, C., Xiang, J., Li, Z., & Guo, C. (2023) · Journal of Luminescence · doi:10.1016/j.jlumin.2023.120132 · Cited by 40
Rise of Metal–Organic Frameworks: From Synthesis to E-Skin and Artificial Intelligence
Sun, Q., Guo, W., Liu, S., Tang, X., Roy, V. A. L., & Zhao, X.-H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c07732 · Cited by 39
Graphdiyne-Based Nanofilms for Compliant On-Skin Sensing
Cai, Y., Shen, J., Fu, J., Qaiser, N., Chen, C., Tseng, C., Hakami, M., Yang, Z., Yen, H., Dong, X., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c06169 · Cited by 38
High-Performance Flexible Temperature Sensors Based on Laser-Irradiated Ag-MWCNTs/PEDOT:PSS
Zhang, Z., Li, Q., Xu, L., Tian, W., & Li, Z. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c15734 · Cited by 38
Silva, A. F., & Tavakoli, M. (2020) · Sensors · doi:10.3390/s20236835 · Cited by 38
Niu, X., Zheng, N., Liao, M., Zhu, Q., Tian, H., Lü, J., & Zhang, X. (2025) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2025.138383 · Cited by 37
Nam, V. B., & Lee, D. (2021) · Nanomaterials · doi:10.3390/nano11030576 · Cited by 37
Self-citationBarriers to translating continuous monitoring technologies for preventative medicine
Chen, J., Jastrzebska‐Perfect, P., Chai, P. R., Say, M. G., Tu, J., Gao, W. F., Halperin, F., Korzenik, J., Huang, H., Katabi, D., et al. (2025) · Nature Biomedical Engineering · doi:10.1038/s41551-025-01520-7 · Cited by 36
Scalably Nanomanufactured Atomically Thin Materials‐Based Wearable Health Sensors
Zhang, R., Jiang, J. S., & Wu, W. (2021) · Small Structures · doi:10.1002/sstr.202100120 · Cited by 36
Ultra-stretchable hydrogel thermocouples for intelligent wearables
Zhao, Y., Fu, X., Liu, B., Sun, J., Zhuang, Z., Yang, P., Zhong, J., & Liu, K. (2023) · Science China Materials · doi:10.1007/s40843-022-2300-3 · Cited by 36
Recent developments in selective laser processes for wearable devices
Kim, Y., Hwang, E., Kai, C., Xu, K., Pan, H., & Hong, S. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00300-7 · Cited by 35
Self-citationBionic Recognition Technologies Inspired by Biological Mechanosensory Systems
Zhang, X., Wang, C., Pi, X., Li, B., Ding, Y., Yu, H., Sun, J., Wang, P., Chen, Y., Wang, Q., et al. (2025) · Advanced Materials · doi:10.1002/adma.202418108 · Cited by 35
Research progress on negative temperature coefficient thermistors: review
Song, Z., Chen, Z., Du, G., Huang, L., Jia, Y., Cao, J., & Guo, Y. (2025) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-025-14727-w · Cited by 35
Recent Advances in Nanomaterials Used for Wearable Electronics
Yang, M., Ye, Z., Ren, Y., Farhat, M., & Chen, P. (2023) · Micromachines · doi:10.3390/mi14030603 · Cited by 35
Liu, Z., Su, J., Zhou, K., Yu, B., Lin, Y., & Li, K. H. (2023) · Nano Letters · doi:10.1021/acs.nanolett.3c02071 · Cited by 35
Recent Advances in Nanomaterial‐Based Biosignal Sensors
Kim, M., Hong, S., Khan, R., Park, J. J., In, J. B., & Ko, S. H. (2024) · Small · doi:10.1002/smll.202405301 · Cited by 34
Self-citationCui, M., Wu, S., Li, J., Zhao, Y. D., Zhai, W., Dai, K., Liu, C., & Shen, C. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110309 · Cited by 34
Hwang, S., Jang, D., Kim, H., Kwak, J., & Chung, S. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c04021 · Cited by 33
Evolution of Oxygen Content of Graphene Oxide for Humidity Sensing
Zhang, X., Zhang, G., Wang, F., & Chi, H. (2024) · Molecules · doi:10.3390/molecules29163741 · Cited by 33
Zhao, L., Fu, X., Xu, H. G., Zheng, Y., Han, W., & Wang, L. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101740 · Cited by 33
Recent advances in multimodal skin-like wearable sensors
Wu, S., Zhao, S., Wu, L., Phan, H., He, S., Tang, J., Xu, J., Chu, D., Wang, C., & Peng, S. (2024) · Applied Physics Reviews · doi:10.1063/5.0217328 · Cited by 32
Colorimetric Sensor Based on Hydroxypropyl Cellulose for Wide Temperature Sensing Range
Yi, H., Lee, S., Kim, D., Jeong, H. E., & Jeong, C. (2022) · Sensors · doi:10.3390/s22030886 · Cited by 32
A review on application of nanomaterials in flexible pressure sensors
Mohamadzade, S., Safavi‐Mirmahalleh, S., Habibzadeh, S., Behboodi‐Sadabad, F., & Salami‐Kalajahi, M. (2025) · Materials Today Nano · doi:10.1016/j.mtnano.2025.100627 · Cited by 31
Altay, B. N., Turkani, V. S., Pekarovičová, A., Fleming, P. D., Atashbar, M. Z., Bolduc, M., & Cloutier, S. G. (2021) · Scientific Reports · doi:10.1038/s41598-021-82961-3 · Cited by 31
High-Performance Temperature Sensor by Employing Screen Printing Technology
Liu, Z., Tian, B., Zhang, B., Zhang, Z., Liu, J., Zhao, L., Shi, P., Lin, Q., & Jiang, Z. (2021) · Micromachines · doi:10.3390/mi12080924 · Cited by 31
Flexible intelligent thermal management systems: Sensing devices, signals, and applications
Feng, Z., Ye, H., Lu, Y., Zhang, H., Liu, Z., & Huang, W. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110842 · Cited by 30
Flexible Ceramic Film Sensors for Free-Form Devices
Nakajima, T., Fujio, Y., Sugahara, T., & Tsuchiya, T. (2022) · Sensors · doi:10.3390/s22051996 · Cited by 30
Flexible Fabric Temperature Sensor Based on Vo2/Pedot:Pss with High Performance
Wang, Y., Hong, Y., Hu, X., Ye, Y., Wang, P., Luo, J., Yin, A., Ren, Z., Liu, H., Qi, X., et al. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300898 · Cited by 30
Kong, C., Li, X., Shi, J., Wang, H., Li, C., Huang, Y., Jiang, S., Wu, K. L., & Li, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154246 · Cited by 30
Reshaping the healthcare world by AI-integrated wearable sensors following COVID-19
Khan, B., Khalid, R. T., Wara, K. U., Masrur, M. A., Khan, S., Khan, W. U., Amara, U., & Abdullah, S. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159478 · Cited by 30
Advances in Three‐Dimensional Temperature Sensing: From Materials to Applications
Chen, R., Shi, B., Song, K., Mathilde Ming‐Zhu Geraldine Charlotte, L. O. K., Jiang, M., An, S., Tao, P., Fu, B., Song, C., Wang, J., et al. (2025) · Advanced Materials · doi:10.1002/adma.202415604 · Cited by 29
Laser-assisted surface activation for fabrication of flexible non-enzymatic Cu-based sensors
Khairullina, E. M., Ratautas, K., Panov, M. S., Andriianov, V. S., Mickus, Š., Manshina, A., Račiukaitis, G., & Tumkin, I. I. (2022) · Microchimica Acta · doi:10.1007/s00604-022-05347-w · Cited by 29
Ma, C., He, L., Bi, L., Gao, H., & Ding, J. (2023) · Journal of Advanced Ceramics · doi:10.26599/jac.2023.9220783 · Cited by 29
Bai, R., Gao, Y., Lu, C., Tan, J., & Xuan, F. (2020) · Measurement · doi:10.1016/j.measurement.2020.108348 · Cited by 29
Laser sintering of Cu particle-free inks for high-performance printed electronics
Mohan, N., Ahuir‐Torres, J. I., Kotadia, H. R., & Elger, G. (2025) · npj Flexible Electronics · doi:10.1038/s41528-025-00389-5 · Cited by 28
Guo, P., Liu, Q., Zhang, X., Liang, J., Li, Q., Zheng, K., & Wu, W. H. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112474 · Cited by 28
Kim, K. K., Bang, J., Kim, M., Jeong, J., Ha, I., & Ko, S. H. (2025) · Nature Materials · doi:10.1038/s41563-025-02373-w · Cited by 28
Self-citationFlexible Tactile Sensors: Materials, Mechanisms, Structures, and Multifaceted Applications
Wan, Z., Liu, P., Fu, Y., Liu, C., Peng, S., Fan, Y., Yue, L., Tian, Y., Ren, C., Zhang, C., et al. (2025) · Small · doi:10.1002/smll.202511475 · Cited by 28
Jeerapan, I., Sonsa‐ard, T., & Nacapricha, D. (2020) · Chemosensors · doi:10.3390/chemosensors8030071 · Cited by 28
Recent advances in selective laser–material interaction for biomedical device applications
Um, S., Hwang, S., Grigoropoulos, C. P., Jeon, H., & Ko, S. H. (2022) · Applied Physics Reviews · doi:10.1063/5.0101634 · Cited by 28
Self-citationKim, D., Bang, H., Baac, H. W., Lee, J., Truong, P. L., Jeong, B. H., Appadurai, T., Park, K. K., Heo, D., Nam, V. B., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213064 · Cited by 28
Self-citationMultimodal Wearable Ionoskins Enabling Independent Recognition of External Stimuli Without Crosstalk
Choi, W. Y., Kwon, J. H., Kim, Y. M., & Moon, H. C. (2023) · Small · doi:10.1002/smll.202301868 · Cited by 28
Flexible Copper-Based Thermistors Fabricated by Laser Direct Writing for Low-Temperature Sensing
Peng, Z., Guo, W., Liu, T., Wang, X., Shen, D., Zhu, Y., Zhou, X., Yan, J., & Zhang, H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c15995 · Cited by 28
Li, H., Zhang, H., Chang, A., Ma, X., Rong, J., & Yang, L. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.02.032 · Cited by 27
Recording Temperature with Magnetic Supraparticles
Reichstein, J., Müssig, S., Bauer, H., Wintzheimer, S., & Mandel, K. S. (2022) · Advanced Materials · doi:10.1002/adma.202202683 · Cited by 27
Photocurable 3D printing gels with dual networks for high-sensitivity wearable sensors
Rong, Y., Zhu, L., Zhang, X., Fei, J., Li, H., Huang, D., Huang, X., & Yao, X. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130828 · Cited by 27
Temperature sensor based on an erbium-doped fiber Sagnac interferometer
Pizzaia, J. P. L., Silva, R. L., Junior, A. G. L., & Castellani, C. E. S. (2022) · Applied Optics · doi:10.1364/ao.448377 · Cited by 27
Deep-Learning-Based Analysis of Electronic Skin Sensing Data
Guo, Y., Sun, X., Li, L., Shi, Y., Cheng, W. M., & Pan, L. (2025) · Sensors · doi:10.3390/s25051615 · Cited by 26
Metadata
- Authors
- Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., Choi, J., Lee, D., & Ko, S. H.
- Affiliations
- Seoul National University (KR)
- Gachon University (KR)
- Hanyang University (KR)
- Pusan National University (KR)
- Korea Institute of Industrial Technology (KR)
- Kyungpook National University (KR)
- Corresponding author
- Lee, Daeho
- Ko, Seung Hwan
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-07
- Volume
- 32
- Issue
- 2
- Pages
- e1905527-e1905527
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2989431324
- Semantic Scholar
- cacc34e6361bebd59ccdcb1210f450f17ed78755
- Cited by
- 449
- References
- 51
- Citations by year
- 2026: 35 · 2025: 96 · 2024: 93 · 2023: 71 · 2022: 67 · 2021: 62 · 2020: 24 · 2019: 1
- FWCI
- 13.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Funders
- National Research Foundation of Korea (2017R1A2B3005706, 2018R1D1A1B07042735)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- wearable temperature sensors, NTC thermistor, artificial skin, electronic skin, monolithic integration, respiratory disease detection, soft robotics
- MeSH terms
- Wearable Electronic Devices, Temperature, Skin, Artificial, Mechanical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.