Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Open accessThe DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor‐based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser‐induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat‐sensitive polymer substrates due to the low‐temperature requirements of the process. As a proof of concept, temperature‐sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The negative temperature coefficient (NTC) thermistor has a clear advantage over other temperature sensors in that it exhibits a much simpler structure while presenting equivalently high temperature sensitivity.[215]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [215]
Experimental — accuracy not yet measuredIn the citing paper
“It revealed a notable 27% rise in respiratory rate and a significant 65% reduction in temperature variation amplitude, indicating shallow breath, when confronted with low blood oxygen saturation levels.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“It has been demonstrated that it can capture small temperature variations associated with inhalation and exhalation. Besides, it was also able to accurately monitor changes in respiration patterns during intense physical activities.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“The nickel oxide (NiO) temperature sensor can be conformably attached to various curvatures on the facial surface, enabling continuous and accurate measurement of physiological temperature over long periods.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable silicon nanoribbon electronics for skin prosthesis
Kim, J., Lee, M., Shim, H. J., Ghaffari, R., Cho, H. R., Son, D., Jung, Y. H., Soh, M., Choi, C., Jung, S., et al. (2014) · Nature Communications · doi:10.1038/ncomms6747 · Cited by 1,435
Self-citationSomeya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
Reproducible resistance switching in polycrystalline NiO films
Seo, S., Lee, M. J., Seo, D. H., Jeoung, E. J., Suh, D.-S., Joung, Y. S., Yoo, I. K., Hwang, I. R., Kim, S. H., Byun, I. S., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1831560 · Cited by 933
Self-citationElectrical and Optical Properties of Narrow-Band Materials
Adler, D., & Feinleib, J. (1970) · Physical Review B · doi:10.1103/physrevb.2.3112 · Cited by 874
Trung, T. Q., Ramasundaram, S., Hwang, B., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504441 · Cited by 870
Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective
Feteira, A. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02990.x · Cited by 711
Mu, Y., Jia, D., He, Y., Miao, Y., & Wu, H.-L. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.11.042 · Cited by 466
Highly Stretchy Black Gold E‐Skin Nanopatches as Highly Sensitive Wearable Biomedical Sensors
Gong, S., Lai, D. T. H., Su, B., Si, K. J., Ma, Z., Yap, L. W., Guo, P., & Cheng, W. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201400063 · Cited by 461
A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature
Tien, N. T., Jeon, S., Kim, D., Trung, T. Q., Jang, M., Hwang, B., Byun, K., Bae, J., Lee, E., Tok, J. B. ‐., et al. (2014) · Advanced Materials · doi:10.1002/adma.201302869 · Cited by 438
Critical review of non-invasive respiratory monitoring in medical care
Folke, M., Cernerud, L., Ekström, M., & Hök, B. (2003) · Medical & Biological Engineering & Computing · doi:10.1007/bf02348078 · Cited by 430
Research works printed but not linked: 2
- Ryu J., 2009, J. Am. Chem. Soc., 92, 3084
- Mironova‐Ulmane N., 2011, Cent. Eur. J. Phys., 9, 1096
Cited by
Items 301–400 of 491
Gong, Y., Wu, W., Li, Z., Zhou, W., Zhao, J., Li, Q., Jiang, M., & Li, H. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101314 · Cited by 9
Liquid Metal‐Carbon Fiber Thermocouple Array for Detection of Human Thermal Parameters
Wang, D., Wang, Y., Chang, H., Dou, M., & Rao, W. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201391 · Cited by 9
Kim, S., Yoo, D., Lim, J., & Kim, J. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202301589 · Cited by 9
Self-citationLow-cost Zn2(OH)BO3:Pb2+ phosphor for large-scale thermometric applications
Yılmaz, M., & Alp, E. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.167865 · Cited by 9
Monolithic III-nitride photonic circuit on a single chip
Xie, M., Jiang, Y., Gao, X., Tang, X., Yuan, J., Shi, Z., & Wang, Y. (2023) · Applied Physics Letters · doi:10.1063/5.0178382 · Cited by 9
Li, C., Gao, C., Liu, W., Sun, X., & Peng, H. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c07326 · Cited by 8
Yu, L., Liu, G., Zhang, H., & Wen, D. (2026) · Nanoscale · doi:10.1039/d5nr04233j · Cited by 8
Li, X., Zheng, X., Dai, C., Niu, Q., Jin, X., Wang, Y., Zheng, Z., Zhao, J., Li, X., & Zhao, Y. (2026) · Advanced Materials · doi:10.1002/adma.202520257 · Cited by 8
Liu, J. Z., Li, Y., Zhao, X. Q., Pun, E. Y. B., & Lin, H. (2023) · New Journal of Chemistry · doi:10.1039/d3nj00467h · Cited by 8
Zhang, J., Wang, X., Yang, Z., Wang, J., Cao, J., Chen, Q., Yu, S., Zhang, J., Guo, T., Li, H., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14627 · Cited by 8
Cho, M.-O., Kim, S. Y., Back, S., Jang, W. J., Choi, J., Kang, B., & Lim, S. (2023) · ACS Sensors · doi:10.1021/acssensors.3c01262 · Cited by 8
Self-citationRecycling of Nanomaterial Ink Waste for Laser Digital Patterning Process
Nam, V. B., Kim, H., & Lee, D. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c06668 · Cited by 8
Self-citationSelf-powered integrated sensor system for printable fabrication
Dhatterwal, J. S., Kaswan, K. S., & Kumar, N. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13792-1.00008-0 · Cited by 8
He, Y., Zhang, J., Xia, W., Zhang, D., Sun, Y., Wang, G., Zhang, Q., & Huang, X. L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157974 · Cited by 8
Park, W., Yiu, C. K., Liu, Y., Wong, T. H., Huang, X., Zhou, J., Li, J., Yao, K., Huang, Y., Li, H., et al. (2021) · Biosensors · doi:10.3390/bios11110435 · Cited by 8
Liu, G., Jin, C., Hu, B., Zhang, L., Zeng, G., & Xu, H. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc05138e · Cited by 8
Zhang, X., Sun, K., Ma, J., Lin, K., Chen, Z., Zhu, G., Chen, B., Wei, A., Chen, D., & Xu, J. (2025) · ACS Sensors · doi:10.1021/acssensors.5c02096 · Cited by 7
Lian, Z., Wang, L., Xue, Y., Jiang, Y., Yu, D., & Wang, W. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.175720 · Cited by 7
Albeltagi, A., Tolvanen, J., Bhalerao, S. R., & Hannu, J. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300379 · Cited by 7
NiO-Doped Laser-Induced Graphene: A High-Performance Flexible Temperature Sensor
Wang, S., Tan, C., Zong, Q., Sett, A., Ye, H., & French, P. J. (2024) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors60989.2024.10784839 · Cited by 7
Ma, X., Zhang, Y., Cai, S., & He, X. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.119437 · Cited by 7
A Conformable Two-Dimensional Resistance Temperature Detector for Measuring Average Skin Temperature
Namisnak, L. H., Khoshnevis, S., & Diller, K. R. (2021) · Journal of Medical Devices · doi:10.1115/1.4051442 · Cited by 7
Wu, S., Yu, J., Zhang, K., Yang, J. R., Zhang, S., Xing, J., Liu, C., & Deng, Y. (2022) · ChemNanoMat · doi:10.1002/cnma.202100496 · Cited by 7
One‐Step Template‐Free Laser Patterning of Metal Microhoneycomb Structures
Hwang, J. S., Arthanari, S., Park, J., Yang, M., Kim, S., Kim, S., Lee, H., & Kim, Y. (2022) · Small Methods · doi:10.1002/smtd.202200150 · Cited by 7
Self-citationLong, H., Li, Q., Peng, S., Chen, S., Zhang, T., Zhang, M., Li, M., & Chen, L. (2022) · Processes · doi:10.3390/pr10050961 · Cited by 7
A Metal Nanoparticle Thermistor with the Beta Value of 10 000 K
Zhao, X., Guo, J., Wang, J., & Yan, Y. L. (2022) · Small · doi:10.1002/smll.202205136 · Cited by 7
Fabrication of gold-doped crystalline-silicon nanomembrane-based wearable temperature sensor
Kang, K., Sang, M., Xu, B., & Yu, K. J. (2022) · STAR Protocols · doi:10.1016/j.xpro.2022.101925 · Cited by 7
Flexible strain sensor with a hat-shaped structure for in situ measurement of 3D deformation
Xu, L., Sun, Q., & Lu, Y. (2023) · Applied Physics Letters · doi:10.1063/5.0139652 · Cited by 7
Zimo, 蔡. C., Cuifang, 匡. K., Huayong, 杨. Y., Minghui, 洪. H., & Kaichen, 徐. X. (2024) · Chinese Journal of Lasers · doi:10.3788/cjl231372 · Cited by 7
Vieten, T., Weser, S., Schilling, A., Gläser, K., & Zimmermann, A. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202312833 · Cited by 6
Ha, N. P., Ohishi, T., & Mizoshiri, M. (2024) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ada2fa · Cited by 6
Zhao, P., Ding, J., Chen, H., & Fu, H. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.116653 · Cited by 6
He, S., Wang, J., Wang, C., Zhang, X., & Liang, S. (2025) · Journal of the American Ceramic Society · doi:10.1111/jace.70234 · Cited by 6
Gu, Z., Cui, J., Gong, L.-K., Xia, L., & Qu, F. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c14769 · Cited by 6
Laser Printing High‐Resolution Inorganic 3D Microstructures
Bian, P., Hu, Z., Liu, X., Tian, Z., & Chen, Q. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202501797 · Cited by 6
Li, F., Xue, H., Lin, X., Wang, J., Li, J., Zhao, H., & Zhang, T. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-025-01030-1 · Cited by 6
Li, F., Xue, H., Lin, X., Wang, J., Li, J., Zhao, H., & Zhang, T. (2025) · Science Advances · doi:10.1126/sciadv.ady2547 · Cited by 6
Niu, Y., Wang, Z. R., Yang, B., Cheng, H., Li, A., Tan, Y., Bian, L., Yi, C., & Zhang, K. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501654 · Cited by 6
Zheng, Y., Wang, J., Cui, T., Wang, J., Chen, Y., Ou, M., Hu, Y., & Gui, Z. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125025 · Cited by 6
Song, Z., Yu, R., Zhang, X., Sou, K. W., Mu, S., Peng, D., Zhang, X., & Ding, W. (2024) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra57147.2024.10610373 · Cited by 6
Advances in flexible ionic thermal sensors: present and perspectives
Zhao, Z., Shen, Y. H., Hu, R., & Xu, D. (2024) · Nanoscale · doi:10.1039/d4nr03423f · Cited by 6
Intelligent sensing and measurement technologies for medical robotics: A review
Wang, N., Ying, Y., Wang, W., Liu, J., Wu, D., & Zhao, Y. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.116956 · Cited by 7
Flexible bandpass filter with silver conductive layer for GPS, ISM, PCS, LTE and WLAN applications
Vineetha, K. V., Kumar, M. S., Madhav, B. T. P., & Rao, M. C. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.1187 · Cited by 6
V2O5 Nanowires-Based Flexible Temperature Sensor
Neto, J., Dahiya, A. S., Kumaresan, Y., Shakthivel, D., & Dahiya, R. (2021) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps51544.2021.9469760 · Cited by 6
Li, H., Yuan, J., Fennell, G., Abdulla, V., Nistala, R., Dandachi, D., Ho, K. C., & Zhang, Y. (2023) · Biophysics Reviews · doi:10.1063/5.0140900 · Cited by 6
Ye, Y., Hong, Y., Liang, Q., Wang, Y., Wang, P., Luo, J., Yin, A., Ren, Z., Liu, H., Qi, X., et al. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.01.041 · Cited by 6
Rapid YFeO3 gas sensor for detecting formaldehyde working at room temperature
Xukeer, A., & Li, J. (2024) · Current Applied Physics · doi:10.1016/j.cap.2024.05.003 · Cited by 6
Park, H. J., Jo, Y., Lee, S. Y., Choi, Y., & Jeong, S. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.159152 · Cited by 6
Jo, Y., Park, H. J., & Jeong, S. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.161093 · Cited by 6
Deng, J., Lv, W., Zhang, P., & Huang, W. (2021) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2021.09.003 · Cited by 6
Peng, W., Hu, Y., Wang, X., Yang, M., Guo, Y., Ma, C., Han, D., Zhou, F., Wang, H., Zhang, R., et al. (2025) · Journal of the American Ceramic Society · doi:10.1111/jace.20639 · Cited by 5
Gong, R., Chen, Y., Kim, M., & Li, G. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202501560 · Cited by 5
Chen, M., Song, Z., Liu, S., Wang, Y., Bao, Y., Ma, Y., Liu, Z., & Niu, L. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202529573 · Cited by 5
Castrejón-Peralta, C., Montiel-Pérez, J. Y., Gante-Díaz, S. A., Vázquez, J. A. C., Rubín-Alvarado, A. A., Reyes-Vera, Z., Torres-Delgadillo, J. M., Sossa, H., Villegas, O. O. V., & Sánchez, V. G. C. (2026) · Applied Sciences · doi:10.3390/app16021126 · Cited by 5
Shen, D., Tan, P., Zou, Y., Yuan, X., Li, C., Liang, A., Liu, G., & Li, Z. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202501930 · Cited by 5
Temperature Sensitivity of Flexible Co3O4/PVDF Dielectric Nanocomposites
Li, Z., Chen, J., Wen, A., Guo, F., Hu, D., Zhu, W., & Chen, W. (2022) · Journal of Electronic Materials · doi:10.1007/s11664-022-09744-y · Cited by 5
Huang, S., Zhang, X., Gong, X., Liu, G., Zhou, B., Kong, L., & Li, L. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.06.406 · Cited by 5
Tseng, P.-H., Lai, Y.-S., Huang, C.-M., Tsai, S.-Y., & Ko, F. (2024) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-024-12687-1 · Cited by 5
Effect of applied electrical potential and humidity on friction of Graphene-Based thin films
Cho, H., Lee, C., Lee, S., & Kim, S. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.160802 · Cited by 5
Artificial Flexible Closed‐Loop Tactile Systems
Gu, J., Wang, H., Li, D., Zhang, X., Ji, X., & Liang, J. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202402052 · Cited by 5
Interference‐Free, Multimodal Electronic Skin Matrix with Low‐Power, Monolithic Integrated Circuits
Cho, C., Choi, H., Kim, Y., Park, H., Kim, D. J., Kim, D. H., & Lee, H. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202101020 · Cited by 5
Self-citationYang, T., Wang, X., Yang, Q., Yang, X., & Li, Q. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001075 · Cited by 5
Wang, Y., Liu, C., Liu, Y., & Lyu, Y. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.182883 · Cited by 4
Kim, M. Y., & Choi, J. (2025) · Micro and Nano Systems Letters · doi:10.1186/s40486-025-00244-2 · Cited by 4
Self-citationKim, J., Choi, G., Park, S., Han, J. W., Park, H. W., & Jeong, H. E. (2026) · Small Structures · doi:10.1002/sstr.202500595 · Cited by 4
Self-citationVarnaitė‐Žuravliova, S., Rukuižienė, Ž., Skurkytė-Papievienė, V., Bekampienė, P., Trakšelytė, V., & Baltušnikaitė‐Guzaitienė, J. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17020100 · Cited by 4
Inkjet printed Ti3C2T -based temperature sensor for external monitoring of batteries
Viviani, P., Molinaro, C., & Magagnin, L. (2026) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2026.117631 · Cited by 4
Cai, X., Zeng, Y., Liu, P., Zhang, Y., Wang, L., Ke, H., Long, X., Jiang, H. W., Yang, W., Gan, Z., et al. (2026) · Science Advances · doi:10.1126/sciadv.aed5473 · Cited by 4
Li, H., Guo, X., & Zhu, B. (2024) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2024.106532 · Cited by 4
Self-Powered Mechanoluminescence-Based Mechanical Sensing Glove for Human-Machine Interaction
Zhou, Y., Li, Y., Feng, L., Song, H., Cheng, K. G., Li, L., Pan, W., Zhu, S., & Zhao, L. (2025) · ACS Applied Optical Materials · doi:10.1021/acsaom.5c00121 · Cited by 4
All laser direct writing process for temperature sensor based on graphene and silver
Li, Q., Bai, R., Guo, L., & Gao, Y. (2024) · Frontiers of Optoelectronics · doi:10.1007/s12200-024-00108-4 · Cited by 4
Nickel current collector activated by ambient green laser for All-Printed microsupercapacitors
Jo, Y., Bae, S. H., Cho, M. K., & Jeong, S. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155879 · Cited by 4
Li, N., Zhan, F., Su, J., Li, Y., Chen, X., Guo, M., Wang, L., & Liu, J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202507514 · Cited by 4
Nanocrystalline Nickel Manganite Synthesis by Sol-Gel Combustion for Flexible Temperature Sensors
Nikolić, M. V., Vasiljević, Z. Ž., Dojčinović, M. P., Tadić, N., Radovanović, M. R., & Stojanović, G. M. (2020) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps49123.2020.9239569 · Cited by 4
Superhydrophobic, Oleophobic, Self-Cleaning Flexible Wearable Temperature Sensing Device
Chen, C.-H., Tsai, T.-W., Cheng, I., & Chen, J. (2022) · ECS Advances · doi:10.1149/2754-2734/ac82bf · Cited by 4
Modification of nickel micropatterns for sensor-active applications from deep eutectic solvents
Levshakova, A. S., Khairullina, E. M., Panov, M. S., Ninayan, R., Mereshchenko, A. S., Shishov, A. Y., & Tumkin, I. I. (2023) · Optical and Quantum Electronics · doi:10.1007/s11082-022-04403-2 · Cited by 4
Influence of Encapsulation on the Performance of V2O5 Nanowires-Based Temperature Sensors
Neto, J., Dahiya, A. S., & Dahiya, R. (2022) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps53764.2022.9781483 · Cited by 4
Taheri, M., Ponnambalam, K., Shboul, A. A., Ketabi, M., & Deen, M. J. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.116693 · Cited by 3
Wang, L., Gao, H., Wang, H., Chang, B., Wang, M., & Yu, S. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c01676 · Cited by 3
Zhang, S., Ding, Y., Zheng, K., Yi, Y., Li, Z., Lin, J., Chen, G., Meng, X., Zhang, C., Li, B., et al. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c16824 · Cited by 3
A Smart Headband for Multimodal Physiological Monitoring in Human Exercises
Liu, S., Chen, G., Peng, J., Tian, S., Mao, Q., Wei, C., Yuan, J., & Zhu, R. (2026) · Advanced Science · doi:10.1002/advs.74279 · Cited by 3
Ahmad, W., Tarique, M., Abbas, R., Ahmad, I., Qayyum, F., Yu, S., & Wei, J. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.187125 · Cited by 3
Zhang, Z., Wang, Z., Liu, Y., & Lyu, Y. (2026) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-026-17469-5 · Cited by 3
A new solution-based matrix material for temperature sensors
Keskin, Ö. Y., & Erol, M. (2023) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-023-10683-5 · Cited by 3
Wu, R., Liu, Y., He, D., Sun, H., Liu, Y., Chen, J., Chang, A., & Zhang, B. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c00651 · Cited by 3
Ultrathin Hydrogel e-Skin With High Resolution for Thermal and Tactile Haptics
Fu, X., Liu, J., Sun, H., Gao, J., Xu, J., Huang, J., & Liu, K. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3578352 · Cited by 3
An in-situ integrated material distinction sensor based on density and heat capacity
Wu, S., Yang, J., Xing, J., Yu, J., & Zhang, K. (2023) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/acebfd · Cited by 3
Maillard reaction-derived laser lithography for printing functional inorganics
Dai, X. B., Jiang, Y., Wang, X., Chen, F., Gao, L., Li, X., & Zou, G. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1230-x · Cited by 3
Vyležich, Z., Kyselák, M., Vávra, J., & Vršecká, M. (2024) · IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT) · doi:10.1109/metroind4.0iot61288.2024.10584171 · Cited by 3
Zaman, S. U., Imran, A., Ijaz, M., & Rasheed, A. (2024) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250241308562 · Cited by 2
Sun, J., Zhang, P., Yan, K., Pan, A., Len, C., Ouyang, W., Shi, C., Shi, X., & Hong, J. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.137607 · Cited by 2
Liu, Y., Ren, P., Yang, L., O’Connor, B. T., Dong, J., & Zhu, Y. (2025) · Advanced Electronic Materials · doi:10.1002/aelm.202400983 · Cited by 2
InGaZnO‐Based Thin‐Film Thermistors on PEEK Fabric for Green Smart Textiles
Lanthaler, A. H., Vásquez, S., Zamboni, R., Haller, M., Petti, L., Munzenrieder, N. S., & Cantarella, G. (2025) · Advanced Electronic Materials · doi:10.1002/aelm.202500146 · Cited by 2
A High-Speed Thermometry System Utilizing the Time-Stretch Effect Based on Cascaded FBGs
Lin, W., Bai, J., Huang, Z., Xu, R., Liu, Y., Zhang, M., Zhao, F., & Shao, L. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3636506 · Cited by 2
Peng, L., Hu, J., Fu, J., & Zhang, Z. (2025) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2025.127327 · Cited by 2
Chen, Y., Jiang, G., Zhu, H., Meng, X., Huang, S., & Zhou, J. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c05388 · Cited by 2
Wang, Z., Ding, P., Jia, X., Xu, J., Luo, Z., Li, M., & Chen, D. (2026) · Journal of Materials Chemistry C · doi:10.1039/d5tc04055h · Cited by 2
Interfacial Molecular Ordering of PANI/MWCNT for Hazard and Vital Biophysical Signal Monitoring
Chen, M., Liu, H., Zhang, X., Wan, S., Tang, Z., Xie, D., Liu, Z., Zhou, H., & Zong, P. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202522905 · Cited by 2
Bioinspired Crossmodal Tactile Sensory Nerve for High‐Accurate Object Recognition
Chen, D., Han, Y., Wang, X., Cheng, W., He, J., Li, X., Oshima, Y., Shan, C., & Cheng, S. (2026) · Energy & environment materials · doi:10.1002/eem2.70279 · Cited by 2
Bridging sensation and actuation: From fundamental architectures to adaptive systems
Huang, Y., Zhu, W., Yin, C., Hu, S., Zhou, J., Guo, Z., Zhang, Q., Zhang, G., & Deng, Y. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173685 · Cited by 2
Metadata
- Authors
- Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., Choi, J., Lee, D., & Ko, S. H.
- Affiliations
- Seoul National University (KR)
- Gachon University (KR)
- Hanyang University (KR)
- Pusan National University (KR)
- Korea Institute of Industrial Technology (KR)
- Kyungpook National University (KR)
- Corresponding author
- Lee, Daeho
- Ko, Seung Hwan
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-07
- Volume
- 32
- Issue
- 2
- Pages
- e1905527-e1905527
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2989431324
- Semantic Scholar
- cacc34e6361bebd59ccdcb1210f450f17ed78755
- Cited by
- 449
- References
- 51
- Citations by year
- 2026: 35 · 2025: 96 · 2024: 93 · 2023: 71 · 2022: 67 · 2021: 62 · 2020: 24 · 2019: 1
- FWCI
- 13.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Funders
- National Research Foundation of Korea (2017R1A2B3005706, 2018R1D1A1B07042735)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- wearable temperature sensors, NTC thermistor, artificial skin, electronic skin, monolithic integration, respiratory disease detection, soft robotics
- MeSH terms
- Wearable Electronic Devices, Temperature, Skin, Artificial, Mechanical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.