Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Open accessThe DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor‐based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser‐induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat‐sensitive polymer substrates due to the low‐temperature requirements of the process. As a proof of concept, temperature‐sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The negative temperature coefficient (NTC) thermistor has a clear advantage over other temperature sensors in that it exhibits a much simpler structure while presenting equivalently high temperature sensitivity.[215]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [215]
Experimental — accuracy not yet measuredIn the citing paper
“It revealed a notable 27% rise in respiratory rate and a significant 65% reduction in temperature variation amplitude, indicating shallow breath, when confronted with low blood oxygen saturation levels.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“It has been demonstrated that it can capture small temperature variations associated with inhalation and exhalation. Besides, it was also able to accurately monitor changes in respiration patterns during intense physical activities.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“The nickel oxide (NiO) temperature sensor can be conformably attached to various curvatures on the facial surface, enabling continuous and accurate measurement of physiological temperature over long periods.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable silicon nanoribbon electronics for skin prosthesis
Kim, J., Lee, M., Shim, H. J., Ghaffari, R., Cho, H. R., Son, D., Jung, Y. H., Soh, M., Choi, C., Jung, S., et al. (2014) · Nature Communications · doi:10.1038/ncomms6747 · Cited by 1,435
Self-citationSomeya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
Reproducible resistance switching in polycrystalline NiO films
Seo, S., Lee, M. J., Seo, D. H., Jeoung, E. J., Suh, D.-S., Joung, Y. S., Yoo, I. K., Hwang, I. R., Kim, S. H., Byun, I. S., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1831560 · Cited by 933
Self-citationElectrical and Optical Properties of Narrow-Band Materials
Adler, D., & Feinleib, J. (1970) · Physical Review B · doi:10.1103/physrevb.2.3112 · Cited by 874
Trung, T. Q., Ramasundaram, S., Hwang, B., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504441 · Cited by 870
Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective
Feteira, A. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02990.x · Cited by 711
Mu, Y., Jia, D., He, Y., Miao, Y., & Wu, H.-L. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.11.042 · Cited by 466
Highly Stretchy Black Gold E‐Skin Nanopatches as Highly Sensitive Wearable Biomedical Sensors
Gong, S., Lai, D. T. H., Su, B., Si, K. J., Ma, Z., Yap, L. W., Guo, P., & Cheng, W. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201400063 · Cited by 461
A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature
Tien, N. T., Jeon, S., Kim, D., Trung, T. Q., Jang, M., Hwang, B., Byun, K., Bae, J., Lee, E., Tok, J. B. ‐., et al. (2014) · Advanced Materials · doi:10.1002/adma.201302869 · Cited by 438
Critical review of non-invasive respiratory monitoring in medical care
Folke, M., Cernerud, L., Ekström, M., & Hök, B. (2003) · Medical & Biological Engineering & Computing · doi:10.1007/bf02348078 · Cited by 430
Research works printed but not linked: 2
- Ryu J., 2009, J. Am. Chem. Soc., 92, 3084
- Mironova‐Ulmane N., 2011, Cent. Eur. J. Phys., 9, 1096
Cited by
Items 401–491 of 491
Qing, Z., Choi, S., Brown, M. S., Shanto, M. A. H., Jin, Y., Koh, A., Jin, Z. K., & Mativetsky, J. M. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c01939 · Cited by 2
Huang, Z., Su, Z., Zafar, Z., Zhu, L., Chen, Q., Long, K., Zou, J., & Guo, X. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-12591-5 · Cited by 2
Wang, Z., Zhang, Z., Zheng, T., Liu, Y., & Lyu, Y. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.04.006 · Cited by 2
Wang, Z., Xu, W., Wang, C., Zhang, M., Tu, H., Cui, Y. M., Guo, J., Chen, M., Shi, L., & Wu, L. (2026) · ACS Nano · doi:10.1021/acsnano.6c04083 · Cited by 2
Tongfeng, X., Xu, X., Liu, W., & Ding, J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e25874 · Cited by 2
Wang, Y. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15684-7.00038-5 · Cited by 2
A low-frequency acceleration sensor inspired by saccule in human vestibule
Jiang, Y., Liu, J., Zhang, W., Xiang, G., Chen, Y., He, C. Q., Shen, H., Gong, J., & Bian, Y. (2023) · Review of Scientific Instruments · doi:10.1063/5.0126150 · Cited by 2
Li, Y., You, M., Ran, Y., Zhu, X., Lin, Z., & Liu, J. (2024) · Applied Physics Letters · doi:10.1063/5.0226397 · Cited by 2
Thin-film temperature sensors on natural beeswax
Bhatt, D., Nijkoops, A., Oliveira, H. D. S., Catania, F., Munzenrieder, N. S., & Cantarella, G. (2024) · MRS Advances · doi:10.1557/s43580-024-00970-6 · Cited by 2
The impact of dispersants on the electrical performance consistency of NTC thermistors
Wang, C., Ma, W., Wang, J., He, S., Zhang, X., & Liang, S. (2024) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-024-13796-7 · Cited by 2
Integrated flexible sensors with amplifier circuit for pH and temperature analysis
Liu, G., Shu, X., Li, J., Xu, T., Sui, C., Zhang, S., & Yang, R. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.117024 · Cited by 2
Wang, Q., Ma, D., Fang, H., Wu, D., & Sun, J. (2025) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2025.117944 · Cited by 2
Liu, Z., Liang, T., Xin, Y., Huang, J., Liang, J., He, X. M., Zhang, C., Yang, W., & He, X. H. (2021) · RSC Advances · doi:10.1039/d1ra90133h · Cited by 2
Mazzanti, M., Salvi, A., Giacomini, S., Perazzini, E., Nitti, C., Contucci, S., D’Angelo, M., Ballanti, D., Ursino, D., Marcosignori, M., et al. (2022) · medRxiv · doi:10.1101/2022.02.04.22270087 · Cited by 2
Research on Nanocomposites Related to the COVID-19 Pandemic
Sapuan, S. M., Ilyas, R. A., & Harussani, M. M. (2024) · Springer eBooks · doi:10.1007/978-3-031-71448-1_4 · Cited by 1
Ha, N. P., Tran, H. Q., Kibe, K., Ohishi, T., & Mizoshiri, M. (2025) · Optics Express · doi:10.1364/oe.550285 · Cited by 1
Zhang, J., Xu, B., Yang, Y., Xie, Z., & Xu, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c18930 · Cited by 1
Hydrogel-Based Piezoelectric Film Devices for Biomedical Applications
Lin, D., Tang, J., & Yu, Y. (2025) · Engineering materials · doi:10.1007/978-3-031-88736-9_13 · Cited by 1
Ji, Z., Huang, X., Wang, X., Sheng, H., & Xu, S. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.109237 · Cited by 1
Geng, Z., Miao, Z., Xie, L., Zhang, H., Jiang, D., Han, Y., Huang, R., & Li, L. (2025) · Cryogenics · doi:10.1016/j.cryogenics.2025.104189 · Cited by 1
Self-Adaptive Polymer Fabry–Pérot Thermometer for High-Sensitivity and Wide-Linear-Range Sensing
Cheng, Y., Yu, M., Liu, J., Tan, Y., & Chen, J. (2025) · Biosensors · doi:10.3390/bios15090602 · Cited by 1
Jo, Y., Bae, S. H., Cho, Y. J., Baek, B., Kim, D. Y., Hong, S. J., Jo, H. C., Cho, M. K., Park, J. H., & Jeong, S. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118884 · Cited by 1
Self-citationQuan, H., Wang, L., Luo, Y., Li, L., Yang, C., Jin, L., & Zhao, J. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107935 · Cited by 1
Laser-induced bimodal flexible device for stress–strain and photoelectric response detection
Yang, H., Liu, H., Chen, K., & Zhang, C. (2025) · Optics & Laser Technology · doi:10.1016/j.optlastec.2025.114158 · Cited by 1
Li, P., Gao, Z., & Liang, C. (2025) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/csb-2025-5240 · Cited by 1
Nam, V. B., Bui, P., Ngo, G. H., Pham-Nguyen, K. D., Bang, S. Y., No, H., Lee, J., & Lee, D. (2026) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2026.100942 · Cited by 1
Self-citationProactive Robotic Grasp Stability via Tactile Safety Margin Feedback
Park, Y., Kim, J., Kim, T., Cho, W., Luo, J., Seong, M. R., Park, C., Lee, A., Choi, S., You, I., et al. (2026) · Advanced Intelligent Systems · doi:10.1002/aisy.202501051 · Cited by 1
Self-citationMa, W., Wu, H., Ding, S., Zhang, R., Trần, V. T., Chen, X., Sun, G., An, J., & Duan, X. (2026) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ae6e02 · Cited by 1
A flexible multimodal sensor with intrinsic signal decoupling for wearable respiratory monitoring
Song, Z., Huang, C., Sheremet, E. S., Rodriguez, R. D. D., Shi, L., Cheng, Y., Sun, J., Wang, G., & Wang, R. (2026) · Soft Science · doi:10.20517/ss.2026.64 · Cited by 1
Wang, X., Luo, Y., Yang, X., Bi, S., Wang, K., Yang, Z., Liu, M., Zhang, Y., Guo, Y., & Liu, H. (2026) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.6c00720 · Cited by 1
Zhao, J., Pan, X., Li, N., Wang, Y., Sun, Y. W., Wang, X., Liu, R., Gao, M., Liu, B., Ma, N., et al. (2026) · ACS Sensors · doi:10.1021/acssensors.6c00782 · Cited by 1
Hu, Q., Chen, X., Huang, Y., Zhan, Y., Chen, G., Wu, H., Liang, Z., Zhang, H., Yao, L., Wu, Z., et al. (2026) · Small · doi:10.1002/smll.75499 · Cited by 1
Investigation of the Influence of Heterostructure on the Parameters of Microwave Transistors
Shesterikov, A. E., Shesterikova, D. A., & Erofeev, E. V. (2023) · International Scientific-Technical Conference on Actual Problems of Electronic Instrument Engineering (APEIE) · doi:10.1109/apeie59731.2023.10347827 · Cited by 1
Takeshita, T., Yoshida, M., Kobayashi, T., & Takei, Y. (2024) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2024.115259 · Cited by 1
Physical Sensor for Electronic Skin Based on Nanomaterials: A Review
Dang, D., & Xu, K. (2024) · Integrated ferroelectrics · doi:10.1080/10584587.2024.2324683 · Cited by 1
Zhang, J., Li, F., Chen, W., Xu, B., Yang, Y., Xie, Z., & Xu, H. (2024) · Applied Physics Letters · doi:10.1063/5.0228989 · Cited by 1
Wu, R., Liu, Y., Sun, H., Chang, A., & Zhang, B. (2025) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2025.117475 · Cited by 1
Optimization of PEDOT:PSS Aqueous Solution for High-Performance Flexible Temperature Sensors
Qin, L., Lu, T.-F., Qian, M., Liang, Y., Wu, S., Wen, Y., Liu, X., Jiang, W., Zheng, W., Cui, Y., et al. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3568020 · Cited by 1
Shi, S., Zhao, P., Yang, P., Zhao, L., Yi, J., Wang, Z., & Yu, S. (2025) · Nanomaterials · doi:10.3390/nano15131001 · Cited by 1
Laser material processing for design and fabrication of wearable biosensors and bioelectronics
Tran, V. V., Bui, V. K. H., & Lee, D. (2025) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2025.117755 · Cited by 1
Self-citationTaheri, M., Ponnambalam, K., Shboul, A. A., Ketabi, M., & Deen, M. J. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500060 · Cited by 1
iThermoGraph: IoT-Integrated Graphene-Based Thermocouple for Real-Time Temperature Monitoring
Mahar, A. A., Farooq, U., Ali, B., D’Aloia, A. G., Bidsorkhi, H. C., & Sarto, M. S. (2025) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps65444.2025.11105644 · Cited by 1
Song, Z., Hou, R., & Jiang, F. (2024) · Frontiers in Materials · doi:10.3389/fmats.2024.1435540 · Cited by 1
Engineering of hybrid materials for self-powered flexible sensors
Shin, Y.-E. (2020) · Scholarworks@UNIST (Ulsan National Institute of Science and Technology)
Real-time local muscle fatigue assessment using synaptic transistors
Pal, M. (2022) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/156001
THE SIMULATION AND DATA ANALYSIS OF TEMPERATURE SENSOR
Ramadhan, H. F., Sari, R. D. K., Alamsyah, A. P., Fadhillah, A., Nurhikmah, R., Miftahulfallah, S. A., Rahma, W., Firia, A., Saputri, D. A., Irmansyah, I., et al. (2021) · SPEKTRA Jurnal Fisika dan Aplikasinya · doi:10.21009/spektra.062.06
Trends and emerging opportunities for smart wearables
Lee, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99147-6.00005-3
Development of a Small and Simple Nickel-Based Printed Temperature SensorPreprint
dos santos, A. R. R., & Viana, J. C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.5076674
Wearable Nanoelectronic Devices for Skin Wound Healing
Liu, Y., Jia, Z., Huang, Y., Gao, Y., Yang, L., & Zhang, D. (2025) · Journal of Nanoelectronics and Optoelectronics · doi:10.1166/jno.2025.3709
Altinsoy, M. E. (2025) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.25000803
Fabrication of a Flexible Temperature-Pressure Dual Sensor Array for E-Skin Applications
Baramatiwala, R. S., Fatema, A., & Hussain, A. M. (2025) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps65444.2025.11105639
Schleifer, S. L., Menkin, A., Avtalion, N., & Regev, O. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5688634
ТОНКИЕ МЕТАЛЛООКСИДНЫЕ ПЛЕНКИ ДЛЯ ГИБКИХ И РАСТЯГИВАЮЩИХСЯ ЭЛЕКТРОННЫХ УСТРОЙСТВ
Белых, М., Permyakov, D. S., & Строгонов, А. (2025) · ELECTRONICS Science Technology Business · doi:10.22184/1992-4178.2025.246.5.90.102
Application of polyimides in medical sensors
Lin, L., Liang, H., Zhou, Z., & Chen, Y. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29911-7.00013-8
Tabrizi, M. (2023) · UPCommons institutional repository (Universitat Politècnica de Catalunya)
Laser induced graphene-on-paper for multimodal sensor applications in smart food management
민진기 (2023) · Seoul National University Open Repository (Seoul National University)
Wearable Integrated Multi-Sensor Modality for Real-Time Health Monitoring
Mahar, A. A., Boodaghian, D., D’Aloia, A. G., Bidsorkhi, H. C., & Sarto, M. S. (2025) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors59705.2025.11330480
Liu, L., Ma, C., Zhou, Y., Liu, Y., Fu, Z., Liu, X., Luo, L., Ji, Y., Zhang, H., Xie, Y., et al. (2026) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c02591
Bian, Y., Sun, S., Zhang, M., Peng, Y., Zhang, M., Liu, L., Xia, L., Luo, L., Dong, X., Zhao, P., et al. (2026) · Organic Electronics · doi:10.1016/j.orgel.2026.107414
Life-cycle zero-power sensing in structural health monitoring: A conceptualization
Satme, J. N., Liu, H., Agrawal, P., Downey, A. R. J., Laflamme, S., & Narasimhan, S. (2026) · Measurement · doi:10.1016/j.measurement.2026.121125
Jo, Y., Bae, S. H., Baek, B., Kim, D. Y., Hong, S. H. S., Jo, H. C., Cho, Y. J., Cho, M. H., Park, J. H., & Jeong, S. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.175915
Self-citationWang, H., Shi, J. Y., Huang, Y., Jiang, S., Wang, K., Wu, K., & Che, G. (2026) · Polymer · doi:10.1016/j.polymer.2026.129960
Scalable Conformal Electronics Based on Roll-to-Roll Exfoliated van der Waals Semiconductors
Sozen, Y., Zamora‐Amo, E., Riquelme, J. J., & Castellanos-Gómez, A. (2026) · ACS Nano · doi:10.1021/acsnano.6c04448
Lim, S., Lee, H., Kim, T., Jang, D., Baik, S., Kim, K., & Suk, J. W. (2026) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2026.118101
Self-citationAlghabsha, A. T. S., Salih, O. A., & Feng, Y. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.123179
Lin, J., Zhao, Y., You, J., 杨防阻, Hu, R., Su, J.-J., Wu, Y., Han, L., & Zhan, D. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.178545
Zhan, J., Guan, M., Wang, Z., Qi, X., & Wang, S. (2026) · Sensors · doi:10.3390/s26134311
Sang, M. (2026) · Journal of the Korean Institute of Electrical and Electronic Material Engineers · doi:10.4313/jeem.2026.39.4.4
Laser-induced biocompatible molybdenum dioxide for versatile wearable bioelectronics
Li, J., Cai, Z., Hou, Y., Yang, H., Park, I., Yang, G., & Xu, K. (2026) · Opto-Electronic Advances · doi:10.29026/oea.2026.260069
Electrically conductive polymeric-based composites for flexible printed temperature sensors
Viviani, P., Masolo, E., Cazzola, M., & Corigliano, A. (2026) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2026.118730
Kessentini, Y., Chaabane, I., Saïdi, L., & Feki, H. (2026) · RSC Advances · doi:10.1039/d6ra04057h
A cryogenic liquid level gauge based on a printable flexible temperature sensor
Hu, Q., Huang, Y., Huang, L., Zhan, Y., Chen, G., Dong, Y., Wen, S., Zhang, H., Tang, X., Yao, L., et al. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.141452
Wearable Electronics for Precision Diagnosis Through Advanced Manufacturing and Integration
Gong, X., Zheng, Y., Ding, X., Gao, J., Cheng, B., Shao, X., Li, J., Jiang, L., Haick, H., & Yang, J. (2026) · Nano-Micro Letters · doi:10.1007/s40820-026-02311-8
A skin-conformal liquid metal strain sensor integrating deep learning for neck motion monitoring
Lu, C., Zhang, Z., Dong, L., Wang, X., Wang, Y., Guo, M., Zhang, M., Guo, R., & Rao, W. (2026) · iScience · doi:10.1016/j.isci.2026.117142
Kim, H., Kim, G., Bui, P., Jeon, H., & Lee, D. (2026) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-026-00927-0
Self-citationOsman, A., Bakhbergen, U., Aakyiir, M., Lü, J., & Araby, S. (2026) · Nano Materials Science · doi:10.1016/j.nanoms.2026.06.014
33‐3: Invited Paper: Flexible Temperature Sensor with Colloidal Quantum Dots (CQD)
Nahar, S., Arnob, M. R. M., Jeong, H., Lee, H., & Jang, J. H. (2026) · SID Symposium Digest of Technical Papers · doi:10.1002/sdtp.70001_125
Self-citationLuo, Y., Yang, C., & Zhao, J. (2026) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2026.118508
Laser-matter interactions in intrinsically soft materials for biointegrated systems
Park, J. J., Kim, M., & Ko, S. H. (2026) · PhotoniX · doi:10.1186/s43074-026-00273-z
Self-citation3D-printed carbon hybrid sensors for spatially resolved strain sensing
Schleifer, S. L., Menkin, A., Avtalion, N., Shneck, R., & Regev, O. (2026) · Carbon · doi:10.1016/j.carbon.2026.122155
Advances in self-powered wearable and flexible electronics: A review
Qutub, M., Premchandani, T., Sheikh, S. S., Navale, A., Tatode, A., Taksande, J., Umekar, M. J., Khan, R., Bawankar, S., & Lokhande, Y. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2026.104068
Qiu, S., Jin, F., Zhou, S., Wu, Q., Ge, H., & Wang, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.130922
Bioinspired supramolecular thermistor for resolving subtle temperature variations
Yu, Y., Li, Y., Zhang, D., Han, H., Ren, X., Gao, K., Wen, H., Wang, J., Hu, Z., Ren, H., et al. (2026) · Science Advances · doi:10.1126/sciadv.aei0002
Ma, C., Ge, X., Wang, M., Cai, S., Bao, N., 丁健翔, Gao, H., & Guan, F. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.10.240
Thermal-history encoding through ionic-state programming in a monolithic organic thermosynapsePreprint
Kim, D. H., Kong, Z., Kwon, J. H., Kim, J. H., Choi, H., Yun, J., Yun, S., Yang, H. W., Shin, H. J., Kim, S. Y., et al. (2026) · Research Square · doi:10.21203/rs.3.rs-11149224/v1
Self-citationFang, S., Liu, H., Zhang, H., Zhang, Z., & Sun, Y. (2026) · Materials Today Advances · doi:10.1016/j.mtadv.2026.101027
Monolithically and in situ integrated PbS infrared imagers
Li, S., Liu, J., Gao, L., Wang, Y., Liu, R., Wan, J., Li, S., Li, Z., Tang, J., Ma, L., et al. (2026) · Nature · doi:10.1038/s41586-026-11222-y
Types of wearable sensors based on detection strategies
Singh, D., Thapa, S., Verma, R., & Singh, J. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-36504-1.10002-7
Vandana, M., Sharma, A., Sirichandana, B., Patel, B. G. M., & Hegde, G. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-36504-1.00015-3
Metadata
- Authors
- Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., Choi, J., Lee, D., & Ko, S. H.
- Affiliations
- Seoul National University (KR)
- Gachon University (KR)
- Hanyang University (KR)
- Pusan National University (KR)
- Korea Institute of Industrial Technology (KR)
- Kyungpook National University (KR)
- Corresponding author
- Lee, Daeho
- Ko, Seung Hwan
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-07
- Volume
- 32
- Issue
- 2
- Pages
- e1905527-e1905527
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2989431324
- Semantic Scholar
- cacc34e6361bebd59ccdcb1210f450f17ed78755
- Cited by
- 449
- References
- 51
- Citations by year
- 2026: 35 · 2025: 96 · 2024: 93 · 2023: 71 · 2022: 67 · 2021: 62 · 2020: 24 · 2019: 1
- FWCI
- 13.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Funders
- National Research Foundation of Korea (2017R1A2B3005706, 2018R1D1A1B07042735)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- wearable temperature sensors, NTC thermistor, artificial skin, electronic skin, monolithic integration, respiratory disease detection, soft robotics
- MeSH terms
- Wearable Electronic Devices, Temperature, Skin, Artificial, Mechanical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.