Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Open accessThe DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor‐based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser‐induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat‐sensitive polymer substrates due to the low‐temperature requirements of the process. As a proof of concept, temperature‐sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The negative temperature coefficient (NTC) thermistor has a clear advantage over other temperature sensors in that it exhibits a much simpler structure while presenting equivalently high temperature sensitivity.[215]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [215]
Experimental — accuracy not yet measuredIn the citing paper
“It revealed a notable 27% rise in respiratory rate and a significant 65% reduction in temperature variation amplitude, indicating shallow breath, when confronted with low blood oxygen saturation levels.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“It has been demonstrated that it can capture small temperature variations associated with inhalation and exhalation. Besides, it was also able to accurately monitor changes in respiration patterns during intense physical activities.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
In the citing paper
“The nickel oxide (NiO) temperature sensor can be conformably attached to various curvatures on the facial surface, enabling continuous and accurate measurement of physiological temperature over long periods.”
From Artificial intelligence enhanced sensors - enabling technologies to next-generation healthcare and biomedical platform (2023) · cites this paper as Shin et al. 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable silicon nanoribbon electronics for skin prosthesis
Kim, J., Lee, M., Shim, H. J., Ghaffari, R., Cho, H. R., Son, D., Jung, Y. H., Soh, M., Choi, C., Jung, S., et al. (2014) · Nature Communications · doi:10.1038/ncomms6747 · Cited by 1,435
Self-citationSomeya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
Reproducible resistance switching in polycrystalline NiO films
Seo, S., Lee, M. J., Seo, D. H., Jeoung, E. J., Suh, D.-S., Joung, Y. S., Yoo, I. K., Hwang, I. R., Kim, S. H., Byun, I. S., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1831560 · Cited by 933
Self-citationElectrical and Optical Properties of Narrow-Band Materials
Adler, D., & Feinleib, J. (1970) · Physical Review B · doi:10.1103/physrevb.2.3112 · Cited by 874
Trung, T. Q., Ramasundaram, S., Hwang, B., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504441 · Cited by 870
Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective
Feteira, A. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02990.x · Cited by 711
Mu, Y., Jia, D., He, Y., Miao, Y., & Wu, H.-L. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.11.042 · Cited by 466
Highly Stretchy Black Gold E‐Skin Nanopatches as Highly Sensitive Wearable Biomedical Sensors
Gong, S., Lai, D. T. H., Su, B., Si, K. J., Ma, Z., Yap, L. W., Guo, P., & Cheng, W. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201400063 · Cited by 461
A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature
Tien, N. T., Jeon, S., Kim, D., Trung, T. Q., Jang, M., Hwang, B., Byun, K., Bae, J., Lee, E., Tok, J. B. ‐., et al. (2014) · Advanced Materials · doi:10.1002/adma.201302869 · Cited by 438
Critical review of non-invasive respiratory monitoring in medical care
Folke, M., Cernerud, L., Ekström, M., & Hök, B. (2003) · Medical & Biological Engineering & Computing · doi:10.1007/bf02348078 · Cited by 430
Research works printed but not linked: 2
- Ryu J., 2009, J. Am. Chem. Soc., 92, 3084
- Mironova‐Ulmane N., 2011, Cent. Eur. J. Phys., 9, 1096
Cited by
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Wen, F., Zhang, Z., He, T., & Lee, C. (2021) · Nature Communications · doi:10.1038/s41467-021-25637-w · Cited by 494
Wang, M., Luo, Y., Wang, T., Wan, C., Pan, L., Pan, S., He, K., Neo, A., & Chen, X. (2021) · Advanced Materials · doi:10.1002/adma.202003014 · Cited by 451
3D Printed Flexible Strain Sensors: From Printing to Devices and Signals
Liu, H., Zhang, H., Han, W., Lin, H., Li, R., Zhu, J., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202004782 · Cited by 441
Materials-Driven Soft Wearable Bioelectronics for Connected Healthcare
Gong, S., Lu, Y., Yin, J., Levin, A., & Cheng, W. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00502 · Cited by 411
Age of Flexible Electronics: Emerging Trends in Soft Multifunctional Sensors
Lee, J., Cho, K., & Kim, J. (2024) · Advanced Materials · doi:10.1002/adma.202310505 · Cited by 355
Self-citationTransparent Electronics for Wearable Electronics Application
Won, D., Bang, J., Choi, S. H., Pyun, K. R., Jeong, S., Lee, Y., & Ko, S. H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00139 · Cited by 339
Self-citationSkin bioelectronics towards long-term, continuous health monitoring
Wang, Y., Haick, H., Guo, S., Wang, C., Lee, S., Yokota, T., & Someya, T. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00207h · Cited by 318
Liu, H., Du, C., Liao, L., Zhang, H., Zhou, H., Zhou, W., Ren, T., Sun, Z., Lu, Y., Nie, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31051-7 · Cited by 315
Metal-Oxide Nanomaterials Synthesis and Applications in Flexible and Wearable Sensors
Yoon, Y., Truong, P. L., Lee, D., & Ko, S. H. (2022) · ACS Nanoscience Au · doi:10.1021/acsnanoscienceau.1c00029 · Cited by 313
Self-citationWang, C., He, T., Zhou, H., Zhang, Z., & Lee, C. (2023) · Bioelectronic Medicine · doi:10.1186/s42234-023-00118-1 · Cited by 295
Yan, Z., Wang, L., Xia, Y., Qiu, R., Liu, W., Wu, M., Zhu, Y., Zhu, S., Jia, C., Zhu, M., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100709 · Cited by 293
Su, Y., Ma, C., Chen, J., Wu, H., Luo, W., Peng, Y., Luo, Z., Li, L., Tan, Y., Omisore, O. M., et al. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03428-4 · Cited by 287
Sun, Z., Zhu, M., Zhang, Z., Chen, Z., Shi, Q., Shan, X., Yeow, R. C. H., & Lee, C. (2021) · Advanced Science · doi:10.1002/advs.202100230 · Cited by 270
Multilayered electronic transfer tattoo that can enable the crease amplification effect
Tang, L., Shang, J., & Jiang, X. (2021) · Science Advances · doi:10.1126/sciadv.abe3778 · Cited by 231
Direct Laser Writing: From Materials Synthesis and Conversion to Electronic Device Processing
Pinheiro, T., Morais, M., Silvestre, S., Carlos, E., Coelho, J., Almeida, H. V., Barquinha, P., Fortunato, E., & Martins, R. (2024) · Advanced Materials · doi:10.1002/adma.202402014 · Cited by 208
Chhetry, A., Sharma, S., Barman, S. C., Yoon, H., Ko, S., Park, C., Yoon, S., Kim, H., & Park, J. Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007661 · Cited by 196
Self-citationReview of digital printing technologies for electronic materials
Kwon, K., Rahman, M. K., Phung, T. H., Hoath, S., Jeong, S., & Kim, J. S. (2020) · Flexible and Printed Electronics · doi:10.1088/2058-8585/abc8ca · Cited by 187
Self-citationFlexible Plasmonic Biosensors for Healthcare Monitoring: Progress and Prospects
Song, L., Chen, J., Xu, B. B., & Huang, Y. (2021) · ACS Nano · doi:10.1021/acsnano.1c07176 · Cited by 186
Liu, G., Lv, Z., Batool, S., Li, M., Zhao, P., Guo, L., Wang, Y., Zhou, Y., & Han, S. (2023) · Small · doi:10.1002/smll.202207879 · Cited by 182
Pyun, K. R., Kwon, K., Yoo, M. J., Kim, K. K., Gong, D., Yeo, W., Han, S., & Ko, S. H. (2023) · National Science Review · doi:10.1093/nsr/nwad298 · Cited by 179
Self-citationElectronic Skin for Health Monitoring Systems: Properties, Functions, and Applications
Yang, X., Chen, W., Fan, Q., Chen, J., Chen, Y., Lai, F., & Liu, H. (2024) · Advanced Materials · doi:10.1002/adma.202402542 · Cited by 175
Recent advances in smart wearable sensors for continuous human health monitoring
Kulkarni, M. B., Rajagopal, S., Prieto-Simón, B., & Pogue, B. W. (2024) · Talanta · doi:10.1016/j.talanta.2024.125817 · Cited by 173
Toward an AI Era: Advances in Electronic Skins
Fu, X., Cheng, W., Wan, G., Yang, Z., & Tee, B. C. K. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00049 · Cited by 172
Wang, W., Yao, D., Wang, H., Ding, Q., Luo, Y., Ding, H., Yu, J., Zhang, H., Tao, K., Zhang, S., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202316339 · Cited by 162
Ultra‐Thin Flexible Encapsulating Materials for Soft Bio‐Integrated Electronics
Sang, M., Kim, K., Shin, J., & Yu, K. J. (2022) · Advanced Science · doi:10.1002/advs.202202980 · Cited by 161
Self-citationMachine Learning‐Enabled Tactile Sensor Design for Dynamic Touch Decoding
Lu, Y., Kong, D., Yang, G., Wang, R., Pang, G., Luo, H., Yang, H., & Xu, K. (2023) · Advanced Science · doi:10.1002/advs.202303949 · Cited by 159
3D printing of polymer composites to fabricate wearable sensors: A comprehensive review
Osman, A., & Lü, J. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100734 · Cited by 157
Recent developments in wearable breath sensors for healthcare monitoring
Kim, D., Lee, J., Park, M. K., & Ko, S. H. (2024) · Communications Materials · doi:10.1038/s43246-024-00480-w · Cited by 156
Self-citationSang, M., Kang, K., Zhang, Y., Zhang, H., Kim, K., Cho, M., Shin, J., Hong, J., Kim, T., Lee, S. K., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105865 · Cited by 155
Self-citationChen, X., Li, R., Niu, G., Xin, M., Xu, G., Cheng, H., & Yang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136631 · Cited by 153
Zhang, J., Yan, K., Huang, J., Sun, X., Li, J., Cheng, Y., Sun, Y., Shi, Y., & Pan, L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314433 · Cited by 152
Recent Advances in Flexible Temperature Sensors: Materials, Mechanism, Fabrication, and Applications
Liu, L., Dou, Y., Wang, J., Zhao, Y., Kong, W., Ma, C., He, D., Wang, H., Zhang, H., Chang, A., et al. (2024) · Advanced Science · doi:10.1002/advs.202405003 · Cited by 151
Zhang, X., Cui, C., Chen, S., Meng, L., Zhao, H., Xu, F., & Yang, J. H. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c03386 · Cited by 147
Hao, S., Fu, Q., Meng, L., Xu, F., & Yang, J. H. (2022) · Nature Communications · doi:10.1038/s41467-022-34168-x · Cited by 146
Advances in Sweat Wearables: Sample Extraction, Real-Time Biosensing, and Flexible Platforms
Qiao, L., Benzigar, M. R., Subramony, J. A., Lovell, N. H., & Liu, G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07614 · Cited by 144
Advances in Biosensing and Environmental Monitoring Based on Electrospun Nanofibers
Kang, S., Zhao, K., Yu, D., Zheng, X., & Huang, C. (2022) · Advanced Fiber Materials · doi:10.1007/s42765-021-00129-0 · Cited by 138
Hybrid Integration of Wearable Devices for Physiological Monitoring
Zhang, Y., Zheng, X. T., Zhang, X., Pan, J., & Thean, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00471 · Cited by 135
Lee, J., Chen, H., Kim, E., Zhang, H., Wu, K., Zhang, H., Shen, X., Zheng, Q., Yang, J., Jeon, S., et al. (2021) · Materials Horizons · doi:10.1039/d1mh00018g · Cited by 134
Self-citationLiu, H., Sun, Z., Chen, Y., Zhang, W., Chen, X., & Wong, C. (2022) · ACS Nano · doi:10.1021/acsnano.2c02812 · Cited by 134
Aldin, H. N. S., Ghods, M. R., Pour, F. N., & Torshiz, M. N. (2023) · Sensors International · doi:10.1016/j.sintl.2023.100258 · Cited by 132
He, K., Liu, Z., Wan, C., Jiang, Y., Wang, T., Wang, M., Zhang, F., Liu, Y., Pan, L., Meng, X., et al. (2020) · Advanced Materials · doi:10.1002/adma.202001130 · Cited by 131
A multifunctional skin-like wearable optical sensor based on an optical micro-/nanofibre
Pan, J., Zhang, Z., Jiang, C., Zhang, L., & Tong, L. (2020) · Nanoscale · doi:10.1039/d0nr03446k · Cited by 130
Bio-inspired flexible electronics for smart E-skin
Nie, B., Liu, S., Qu, Q., Zhang, Y., Zhao, M., & Liu, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.018 · Cited by 130
A thin-film temperature sensor based on a flexible electrode and substrate
Liu, Z., Tian, B., Zhang, B., Liu, J., Zhang, Z., Wang, S., Luo, Y., Zhao, L., Shi, P., Lin, Q., et al. (2021) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00271-0 · Cited by 126
Manshina, A., Tumkin, I. I., Khairullina, E. M., Mizoshiri, M., Ostendorf, A., Kulinich, S. A., Makarov, S., Kuchmizhak, A. A., & Gurevich, E. L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405457 · Cited by 125
Flexible temperature sensors based on carbon nanomaterials
Chen, Z., Zhao, D., Ma, R., Zhang, X., Rao, J., Yin, Y., Wang, X., & Fang, Y. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb02451a · Cited by 124
Liu, Z., Tian, B., Jiang, Z., Li, S., Lei, J., Zhang, Z., Liu, J., Shi, P., & Lin, Q. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/aca44d · Cited by 123
Beyond Flexible: Unveiling the Next Era of Flexible Electronic Systems
Kim, M. S., Almuslem, A. S., Babatain, W., Bahabry, R. R., Das, U. K., El‐Atab, N., Ghoneim, M. T., Hussain, A. M., Kutbee, A. T., Nassar, J. M., et al. (2024) · Advanced Materials · doi:10.1002/adma.202406424 · Cited by 121
Yu, X., Zheng, Y. H., Zhang, H., Wang, Y., Fan, X., & Liu, T. X. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c01595 · Cited by 120
Robust Fiber‐Shaped Flexible Temperature Sensors for Safety Monitoring with Ultrahigh Sensitivity
Lu, Y., Zhang, H., Zhao, Y., Liu, H., Nie, Z., Xu, F., Zhu, J., & Huang, W. (2024) · Advanced Materials · doi:10.1002/adma.202310613 · Cited by 118
Skin‐Inspired Thermoreceptors‐Based Electronic Skin for Biomimicking Thermal Pain Reflexes
Neto, J., Chirila, R., Dahiya, A. S., Christou, A., Shakthivel, D., & Dahiya, R. (2022) · Advanced Science · doi:10.1002/advs.202201525 · Cited by 116
Mimicking nature to control bio-material surface wetting and adhesion
Li, M., Li, C., Blackman, B. R. K., & Saiz, E. (2021) · International Materials Reviews · doi:10.1080/09506608.2021.1995112 · Cited by 115
A Review on Wearable Electrospun Polymeric Piezoelectric Sensors and Energy Harvesters
Mirjalali, S., Varposhti, A. M., Abrishami, S., Bagherzadeh, R., Asadnia, M., Huang, S., Peng, S., Wang, C., & Wu, S. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200442 · Cited by 115
Functional Graphdiyne for Emerging Applications: Recent Advances and Future Challenges
Wang, M., Pu, J., Hu, Y., Zi, Y., Wu, Z., & Huang, W. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308601 · Cited by 115
Toward Integrated Multifunctional Laser-Induced Graphene-Based Skin-Like Flexible Sensor Systems
Xu, K., Cai, Z., Luo, H., Lu, Y., Ding, C., Yang, G., Wang, L., Kuang, C., Liu, J., & Yang, H. (2024) · ACS Nano · doi:10.1021/acsnano.4c09062 · Cited by 115
Pang, G., Yang, G., & Pang, Z. (2021) · IEEE Transactions on Medical Robotics and Bionics · doi:10.1109/tmrb.2021.3097252 · Cited by 110
Ye, Y., Ge, Y., Zhang, Q., Yuan, M., Cai, Y., Li, K., Li, Y., Xie, R., Xu, C., Jiang, D., et al. (2022) · Advanced Science · doi:10.1002/advs.202104738 · Cited by 110
Bioelectronic Implantable Devices for Physiological Signal Recording and Closed‐Loop Neuromodulation
Oh, S., Jekal, J., Jia Liu, B., Kim, J., Park, J., Lee, T., & Jang, K. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403562 · Cited by 109
Self-citationWearable Sensing Devices for Point of Care Diagnostics
Mondal, S., Zehra, N., Choudhury, A., & Iyer, P. K. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00798 · Cited by 104
Sun, Q., Lai, Q., Tang, Z., Tang, X., Zhao, X., & Roy, V. A. L. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202201088 · Cited by 104
Cao, J., Yang, X., Rao, J., Mitriashkin, A., Fan, X., Chen, R., Cheng, H., Wang, X., Goh, J. C., Leo, H. L., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11921 · Cited by 103
Sensors for Context-Aware Smart Healthcare: A Security Perspective
Batista, E., Moncusi, M. A., López-Aguilar, P., Martínez-Ballesté, A., & Solanas, A. (2021) · Sensors · doi:10.3390/s21206886 · Cited by 102
Laser‐Based Selective Material Processing for Next‐Generation Additive Manufacturing
Park, H., Park, J. J., Bui, P., Yoon, H., Grigoropoulos, C. P., Lee, D., & Ko, S. H. (2023) · Advanced Materials · doi:10.1002/adma.202307586 · Cited by 101
Self-citationDevelopment and application of electrospun fiber-based multifunctional sensors
Chen, X., Wang, J., Zhang, J., Lin, H., Tian, M., Li, M., & Tian, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150204 · Cited by 98
Rational Design of All Resistive Multifunctional Sensors with Stimulus Discriminability
Lee, J., Kim, E., Zhang, H., Chen, H., Venkatesan, H., Chan, K. Y., Yang, J., Shen, X., Yang, J., Jeon, S., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107570 · Cited by 97
Self-citationChen, Z., Yang, Z., Yu, T., Wei, Z., Ji, C., Zhao, B., Yu, T., Yang, W., & Li, Y. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109881 · Cited by 94
A Review of Skin-Wearable Sensors for Non-Invasive Health Monitoring Applications
Mao, P., Li, H., & Yu, Z. (2023) · Sensors · doi:10.3390/s23073673 · Cited by 94
Emerging Thermal Technology Enabled Augmented Reality
Parida, K., Bark, H., & Lee, P. S. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007952 · Cited by 93
Fast-Response Flexible Temperature Sensors with Atomically Thin Molybdenum Disulfide
Daus, A., Jaikissoon, M., Khan, A. I., Kumar, A., Grady, R. W., Saraswat, K. C., & Pop, E. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c01344 · Cited by 93
A Robust and Adhesive Hydrogel Enables Interfacial Coupling for Continuous Temperature Monitoring
Hao, S., Dai, R., Fu, Q., Wang, Y., Zhang, X., Li, H., Liu, X., & Yang, J. H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202302840 · Cited by 92
Emerging Wearable Acoustic Sensing Technologies
Liu, T., Mao, Y., Dou, H., Zhang, W., Yang, J., Wu, P., Li, D., & Mu, X. (2025) · Advanced Science · doi:10.1002/advs.202408653 · Cited by 92
A Fully Flexible Intelligent Thermal Touch Panel Based on Intrinsically Plastic Ag2S Semiconductor
Zhao, X., Yang, S., Wen, X., Huang, Q., Qiu, P., Wei, T., Zhang, H., Wang, J., Zhang, D. W., Shi, X., et al. (2022) · Advanced Materials · doi:10.1002/adma.202107479 · Cited by 90
Lee, J., Cho, K. H., & Cho, K. (2023) · Advanced Materials · doi:10.1002/adma.202209673 · Cited by 88
Han, S., Tan, H., Wei, J., Yuan, H., Li, S., Yang, P., Mi, H., Liu, C., & Shen, C. (2023) · Advanced Science · doi:10.1002/advs.202301713 · Cited by 85
Advancements in research and development to combat COVID-19 using nanotechnology
Chaudhary, V., Royal, A., Chavali, M. S., & Yadav, S. K. (2021) · Nanotechnology for Environmental Engineering · doi:10.1007/s41204-021-00102-7 · Cited by 81
Recent Advances in Flexible Field‐Effect Transistors toward Wearable Sensors
Li, M.-Z., Han, S., & Zhou, Y. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000113 · Cited by 79
Guo, X., Lu, X., Jiang, P., & Bao, X. (2024) · Advanced Materials · doi:10.1002/adma.202313911 · Cited by 79
Wang, H., Li, S., Zhang, Y., Zhang, M., Wang, H., Liang, X., Lü, H., & Zhang, Y. (2025) · SmartSys · doi:10.1002/sys3.3 · Cited by 79
3D active-matrix multimodal sensor arrays for independent detection of pressure and temperature
Jo, Y., Lee, Y., Kwon, J., Kim, S., Ryu, G., Yun, S., Baek, S., Ko, H., & Jung, S. (2025) · Science Advances · doi:10.1126/sciadv.ads4516 · Cited by 78
Integration of sensing and shape-deforming capabilities for a bioinspired soft robot
Wang, Q., Wu, Z., Huang, J., Du, Z., Yue, Y., Chen, D., Li, D., & Su, B. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109116 · Cited by 77
Microsecond-Scale Transient Thermal Sensing Enabled by Flexible Mo 1−x W x S 2 Alloys
Li, W., Kong, L., Xu, M., Gao, J., Luo, L., Li, Y., Wang, K., Zhou, Y., Li, L., Wei, Y., et al. (2024) · Research · doi:10.34133/research.0452 · Cited by 77
Li, N., Zhou, Y., Li, Y., Li, C., Xiang, W., Chen, X., Zhang, P., Zhang, Q., Su, J., Jin, B., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-51648-4 · Cited by 75
Zhu, G., Wang, F., Chen, L., Wang, C., Xu, Y., Chen, J., Chang, X., & Zhu, Y. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109133 · Cited by 74
On-Skin Epidermal Electronics for Next-Generation Health Management
Xu, J., Chen, X., Li, S., Luo, Y., Deng, S., Yang, B. L., Lv, J., Tian, H., Li, X., & Shao, J. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01871-5 · Cited by 74
Skin-inspired thermoelectric nanocoating for temperature sensing and fire safety
Xie, H., Lai, X., Li, H., Gao, J., & Zeng, X. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.06.054 · Cited by 73
Laser direct writing of Ga2O3/liquid metal-based flexible humidity sensors
Cui, S., Lu, Y., Kong, D., Luo, H., Peng, L., Yang, G., Yang, H., & Xu, K. (2023) · Opto-Electronic Advances · doi:10.29026/oea.2023.220172 · Cited by 73
Roadmap on printable electronic materials for next-generation sensors
Pecunia, V., Petti, L., Andrews, J. B., Ollearo, R., Gelinck, G. H., Nasrollahi, B., Jailani, J. M., Li, N., Kim, J. H., Ng, T. N., et al. (2024) · Nano Futures · doi:10.1088/2399-1984/ad36ff · Cited by 72
Self-citationLi, Z., Mi, B., Ma, X., Liu, P., Ma, F., Zhang, K., Chen, X., & Li, W. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147029 · Cited by 71
Zhou, Q., Wei, A., Wang, K., Luo, N., & Liu, Z. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.165503 · Cited by 70
All Resistive Pressure–Temperature Bimodal Sensing E‐Skin for Object Classification
Han, S., Zhi, X., Xia, Y., Guo, W., Li, Q., Chen, D., Liu, K., & Wang, X. (2023) · Small · doi:10.1002/smll.202301593 · Cited by 70
Li, M., Liu, W., Yin, Z., Yang, H., Chen, Y., Yang, C., Luo, Y., Hong, Z., Xie, C., & Xue, M. (2023) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2023.114750 · Cited by 70
Bang, J., Jung, Y., Kim, H., Kim, D., Cho, M., & Ko, S. H. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00786-1 · Cited by 67
Self-citationWu, S., Wang, B. J., Chen, D., Liu, X., Wang, H., Song, Z., Yu, D., Li, G., Ge, S., & Liu, W. (2023) · Science China Materials · doi:10.1007/s40843-022-2328-8 · Cited by 67
Sun, G., Wang, D., Wang, P., Meng, Y., Fu, X., Yan, H., & Meng, C. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202512296 · Cited by 67
Liu, Y., Zheng, H., Zhao, L., Liu, S., Yao, K., Li, D., Yiu, C. K., Gao, S., Avila, R. O., Chirarattananon, P., et al. (2020) · Research · doi:10.34133/2020/1085417 · Cited by 67
MXene Reinforced PAA/PEDOT:PSS/MXene Conductive Hydrogel for Highly Sensitive Strain Sensors
Liang, J., He, J., Xin, Y., Gao, W., Zeng, G., & He, X. H. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200519 · Cited by 66
Yao, Z., Wu, W., Gao, F., Gong, M., Zhang, L., Wang, D., Guo, B., Zhang, L., & Lin, X. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01872-4 · Cited by 66
Nanobiotechnology as a platform for the diagnosis of COVID-19: a review
Abdelhamid, H. N., & Badr, G. (2021) · Nanotechnology for Environmental Engineering · doi:10.1007/s41204-021-00109-0 · Cited by 65
Ikram, M., Ameer, S., Kulsoom, F., Sher, M., Ahmad, A., Zahid, A., & Chang, Y. K. (2024) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2024.109449 · Cited by 65
Metadata
- Authors
- Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., Choi, J., Lee, D., & Ko, S. H.
- Affiliations
- Seoul National University (KR)
- Gachon University (KR)
- Hanyang University (KR)
- Pusan National University (KR)
- Korea Institute of Industrial Technology (KR)
- Kyungpook National University (KR)
- Corresponding author
- Lee, Daeho
- Ko, Seung Hwan
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-07
- Volume
- 32
- Issue
- 2
- Pages
- e1905527-e1905527
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2989431324
- Semantic Scholar
- cacc34e6361bebd59ccdcb1210f450f17ed78755
- Cited by
- 449
- References
- 51
- Citations by year
- 2026: 35 · 2025: 96 · 2024: 93 · 2023: 71 · 2022: 67 · 2021: 62 · 2020: 24 · 2019: 1
- FWCI
- 13.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Funders
- National Research Foundation of Korea (2017R1A2B3005706, 2018R1D1A1B07042735)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- wearable temperature sensors, NTC thermistor, artificial skin, electronic skin, monolithic integration, respiratory disease detection, soft robotics
- MeSH terms
- Wearable Electronic Devices, Temperature, Skin, Artificial, Mechanical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.